Renovation of Khadi Kraft Foot wear unit at Gugai in Salem City

DI0006: Removing the damaged AC sheet roof sheets and replacing with the new Galvalume sheets including cost of Galvalume sheet , J bolts and nuts , bitumen washers etc, and labour for removing and refixing the sheets etc all complete as directed by the departmental officers.

DI0021:Dismantling the damaged brick works of cement mortar in all floors without affecting the adjacent structures including the cost of required tools and plants and scaffolding, if necessary and clearing the debris 2 Km away from the site etc., all complete and as directed by the departmental officers for the following heights. Under 3m Height

DI0021:Dismantling the damaged brick works of cement mortar in all floors without affecting the adjacent structures including the cost of required tools and plants and scaffolding, if necessary and clearing the debris 2 Km away from the site etc., all complete and as directed by the departmental officers for the following heights. Above 3m Height

DI0031:Removing the damaged broken door/window /ventilators including the removal of frames, hinges, fastenings and shutters form the existing structure and stacking the same carefully for reuse if any in the departmental stores at site of work and as directed by the departmental officers etc., all complete (including removing the furniture fittings such as hinges, hookes and eyes etc.,)

DI0037:Dismantling the existing damaged RCC with out affecting the adjacent structures, including the hire charges of tools and plants, and scaffolding if necessary, and clearing the dismantled materials away from the site etc., all complete and as directed by the departmental officers.

DI0018: Dismantling the damaged Plain cement concrete flooring without affecting the adjacent structures, including the cost of required tools and plants and clearing the debris away from the site etc., all complete and as directed by the departmental officers.

JW0037: Providing Aluminium partition wall top with 1/3 5.5mm thick plain glass and bottom with 2/3 Novapan sheet 12mm tk. The outer frame top and bottom using rectangular box section No.9221 of size 101.50x44.450x2.0mm at weight of 1.975 kg/m and section vertical as well as horizontal using rectangular box section No.9222 of size 63.50x38.10x2.0mm at weight of 1.174 kg/m with accessories and furniture fittings etc.,

JV0016: Supplying and fixing inposition of Aluminium anodized colour matt finish louvered ventilator, the outer frame will be 62x38x2mm at 1.17Kg/m and the louvers with moving arrangements will be made with aluminium channel of size 60x30x4mm at 1.27kg/m and clip 0.179kg/m and with necessary 4mm thick pin headed glass for louvers and clips, L.Angle, Screws, T.W plug etc.,

FL0003: Providing and Fixing of polyurethane foam for Sloped roof as thermal insulation panels or Sandwich insulated panels with external 0.50mm total coated thickness pre painted Galvalume sheet with trapezoidal roofing profile having crest height of 38mm at every 333mm span, whereas internal 0.50mm total coated thickness pre painted galvanized iron sheet with micro ribbed profile and the insulation material will be chlorofluoro carbon and hydro chlorofluoro carbon free, high performance rigid polyurethane foam (PUF) conforming to IS 12436 having density not less than 40±2Kg/M3, Thermal conductivity (K-Value) 0.024 W/m.K measured at 10 degree C mean temperature along with necessary flashings such as L flashing, C flashing etc& accessories such as screws , fastners , sealants etc for fixing the panel etc.,. 50mm (+38mm) thick PUF roof panel

MS0046: Supplying and fixing of push and pull type steel Rolling shutters (Gear operated) of best approved quality to the required size using 10 gauge channels, 14 gauge brackets, 18 gauge stripper side and using ‘c’ class MS pipe with required springs, drum wall bearing, locking arrangements with one coat of red oxide, primer, fixing etc., complete in all respects as directed by the departmental officers.

JW0030:Manufacturing and supplying of Steel Windows confirming to IS 1038/1983 specification with steel section used for fabrication of windows as per IS7452/1982 specification

GR0001: Supplying and fixing Mild Steel grills as per the design approved to verandah enclosure

PA0026: Painting the new Iron work and other similar works such as PVC /ASTM Pipes, Kerb Stone and grills with two coats

FC0018:Supplying, fabricating, erecting and fixing Hilux (or) Equivalent Board False Ceiling upto a ceiling height of 4.5m from floor level Using Perforated Sheets (10mm thick)

EL0088: Supplying and fixing of 450 mm dia sweep AC exhaust fan (Heavy) of approved ISI quality

Open Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable a) Light point with ceiling rose

EL0047: Supply and fixing of 18 watts LED tube light with fitting of four feet long

EL0153: Supply and fixing of 24W LED 4000K 2x2 square type Recessed fitting with LED (Higher End) on false Ceiling with suitable hanging support from ceiling with 1 Sq.mm PVC unsheathed copper leads from terminals to the fitting with all accessories including cost of all materials, inter connection charges etc.

Supplying and fixing of Rain water gutter having 16" width including cost of 1 1/2" x 3/4" MS Square pipe, charges for fabrication, transportation and labour charges etc., and as directed by the departmental officers.

DI0074: Thorough scrapping the old iron work surface and Painting the old iron work with two coats of ready mixed first class synthetic enamel paint of approved quality

HORIZONTAL THREE PHASE DISTRIBUTION BOARD WITH MCBS 12 way TPMCB sheet steel distribution boards flush type / surface type fitted with bus bars Etc.,

Open Wiring Run of main with 2 wires of 6 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cablewith ISI mark conforming to IS: 694/1990,1.1 kv grade cable

EL0189: Open Wiring Run of main with 2 wires of 2.5 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cablewith ISI mark conforming to IS: 694/1990,1.1 kv grade cable

EL0194: Open Wiring Run of main with 2 wires of 4 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cablewith ISI mark conforming to IS: 694/1990,1.1 kv grade cable

EL0036: Open Wiring with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable for 5 Amps 5 pin Plug Socket Point at Convenient Places

EL0041: Supplying and fixing 15 Amps 3 pin plug type socket with switch

BMP00012: Brick work in Cement Mortar 1:6 (One of cement and six of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² for superstructure in the following floors a.In Ground Floor

PLMP0001: Plastering with CM 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick

FLMP0006: Supplying and fixing of colour Ceramic Tiles Anti skid without corrugated design for flooring and other similar works (Best approved quality, colour and shade shall be got approved from the Executive Engineer before using) over cement mortor 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick including fixing in position, cutting the tiles to the required size wherever necessary, pointing the joints with Grout (Tile joint filler), curing, finishing etc.

FLMP0005: Supplying and fixing of Colour glazed tiles (Best approved quality and the same shall be got approved from the Executive Engineer before using) over cement plastering in CM 1:2 (One of cement and two of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 10mm thick

BMP0011: Brick work in cement mortar 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² in foundation and basement

FLMP0002: Plastering the top of flooring in CM 1:4 (One of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick

FLMP0001: Flooring with a bed of CC 1:5:10 (one of cement, five of crushed stone sand and ten of hard broken stone jelly including Mortar Plasticizer (Liquid) at 200ml per bag) using 40mm size

RE0005: Supplying, fabricating and placing in position of Mild steel Grills / Ribbed Tor Steels (without cement slurry)

C0038b: Providing and laying in position, Standardised Concrete Mix M-20 Grade in a accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for the all RCC items of works with minimum cement content of 325 Kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser/super plasticiser) C0038.b In Ground Floor

FW0004b: Providing Form work and centering for reinforced cement concrete works b.Plain surfaces such as Roof slab, floor slab, Beams, lintels, lofts, sill slab, staircase waist, portico slab and other similar works

SA0024: Supplying and fixing EWC superior variety (Colour) 500mm with PVC SWR grade ‘P’ or ‘S’ trap

WS0033: Supplying and fixing of half turn C.P Long body Tap of 15mm dia

WS0131:Supplying and fixing of Health Faucet approved quality with ISI mark (Health facet shall be got approved from the E.E. before use.)

GR0075: Supplying, Fabricating and fixing in position of Bare Galvalume sheet including 4' Dia Vertical post, 3' Dia Truss, 2' x 2' Square tube purlin and 1.5' x 1.5' dia Stiffner including cost of labour charges fixing etc.,

DI0012: Clean Removel of Cement plaster from walls without affecting the adjacent structures including the cost of required tools and plants and scaffolding, if necessary and clearing the debris away from the site etc.,

Plastering with CM 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick finished with neat cement, including providing band cornice, ceiling cornice, curing, scaffolding, etc., complete in all respects and complying with relevant standard specifications.

EL0012: Wirng with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable with surface run by means of 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable FAN POINT controlled by 5 amps flush type switch including citcuit mains, cost of all materials, specials, etc., all complete, (Open wiring)

EL0078: Supply and delivery of following Electric Ceiling fan with ISI mark with blades and double ball bearing, capacitor,etc., complete a) 48" Electric fan 1200mm sweep

EL0075: Charges for assembling and fixing of ceiling fan of different sweep with necessary connections and fixing of fan regulator

PA0045: Painting the old walls with TWO COATS OF OIL BOUND DISTEMPER over the through scrapped wall surfaces including scrapping,cost of paints, brushes, watering, curing, scaffoldings, etc., all complete as directed by departmental officers

PA0037: Painting two coats with ready mixed PLASTIC EMULSION PAINT of first class quality paint of approved colour and shade including a priming coat on cement

PA0047:Painting old walls two coats with ready mixed plastic emulsion paint of first class quality paint of approved colour and shade for outer wall and other similar works with priming coat through scrapping including cost of necessary brushes, labour charges, patty etc.,

EL0557a:Supplying and fixing of following MCB with ISI mark including all materials and labour charges etc., all complete and as directed by the departmental officers a) Single Pole 6A to 32A, Single Pole MCB 10KA with ISI mark

EL0557.b Double Pole 6A to 32A, Double Pole MCB 10KA with ISI mark

Four Pole ELCB 40 Amps 30 MA

Four Pole ELCB 60 Amps 30 MA

PA0018: Painting primer coat using approved quality of white cement over the cement plastered / concrete wall surfaces,ceiling or other similar works including cost of white cement, putty, brushes, watering, curing, etc., all complete and as directed by the departmental officers.

PA0019: Painting the walls with two coats using approved quality of best Oil Bound Distemper over the one coat of water based cement primer including cost of distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements & labour charges etc., all complete and as directed by the departmental officers

Please Enable Macros to View BoQ information