SITC of VRF/VRV A.C. Plant

Supply of variable refrigerant flow Air conditioning system Heating & Cooling both for Indoor and Outdoor Unit suitable for cooling & Heating both by multiple scroll compressor controlled by individual inverter complete with indoor and outdoor units. 48 HP

Supply erection testing and commissioning of ceiling concealed Ductable type unit VRF IDU Duct able in the Ceiling with fitting consisting of centrifugal fan, three speed motor, coil section with DX coil, outdoor cabinet, filter insulated drain pan including all accessories complete as required 16 HP minimum 5250CPM

Supply, erection, testing and commissioning of cassette type VRF IDU unit 4 HP

Supply of VRF OEM manufacture treated fresh air unit(TFA) consisting of fan, coil, section with DX coil, outdoor cabinet, filter including all accessories complete as required 16 HP(12.8 TR 2330 CFM)

Supply of VRF Coroded remote controllers suitable for above indoor units to operate, ON/OFF temperature setting, air changing etc. The remote controller shall be suitable for wall mounting with bracket Wired remote controller

Supply of central comptroller for indoor& Outdoor Unit capable of controlling of all IDUs complete with necessary hardware, accessories etc to perform the following function Control of IDUs, ODUs units as above with monitoring of vital parameters such as temperature sensing & setting ON/OFF status etc

Installation, testing and commissioning of variable refrigerant flow modular type Air-conditioning system of in-door and out- door unit suitable for cooling & Heating both by multiple scroll compressor controlled by individual inverter complete with indoor and outdoor units 48 HP

Erection, testing and commissioning of ceiling concealed VRF IDU duct able type unit with fitting consisting of centrifugal fan, three speed motor, coil section with DX coil, outdoor cabinet, filter insulated drain pan including all accessories complete as required 16 HP minimum 5250CPM

Erection, testing and commissioning of VRF IDU cassette type unit with fitting consisting of fan, four speed motor, coil section with DX coil, outdoor cabinet, filter insulated drain pan (with inbuilt drain pump) including all accessories complete as required 4 HP

Erection, testing and commissioning of VRF OEM manufacture treated fresh air unit(TFA) consisting of fan, coil, section with DX coil, outdoor cabinet, filter including all accessories complete as required 16 HP(12.8 TR 2330 CFM)

Installation, testing and commissioning of VRF Corded remote controllers suitable for above indoor units to operate, ON/OFF temperature setting, air changing etc. The remote controller shall be suitable for wall mounting with bracket Wired remote controller

Installation, testing and commissioning central comptroller of all IDUs, ODUs complete for indoor and outdoor unit

Supply, installation, testing and commissioning refrigerant Y joint Pipe required for distribution of refrigerant in copper piping etc complete as per specification

Interconnecting refrigerant pipe work 44.45 mm OD(With 19mm insulation)

Interconnecting refrigerant pipe work 38.1 mm OD(With 19mm insulation)

Interconnecting refrigerant pipe work 34.9 mm OD(With 19mm insulation)

Interconnecting refrigerant pipe work 31.75 mm OD(With 19mm insulation)

Interconnecting refrigerant pipe work 28.6 mm OD(With 19mm insulation)

Interconnecting refrigerant pipe work 25.4 mm OD(With 19mm insulation)

Interconnecting refrigerant pipe work 22.2 mm OD(With 19mm insulation)

Interconnecting refrigerant pipe work 19.05 mm OD(With 19mm insulation)

Interconnecting refrigerant pipe work 15.9 mm OD(With 19mm insulation)

Interconnecting refrigerant pipe work 12.7 mm OD(With 19mm insulation)

Interconnecting refrigerant pipe work 9.5 mm OD(With 19mm insulation)

Supply, testing, installation and fixing of heavy duty class B PVC pipes ISI 4985-2000 drain piping complete with 6 mm thick aluminum laminated XLPE tubular insulation fitting support as per specification 32 mm Dia

Supply, testing, installation and fixing of heavy duty class B PVC pipes ISI 4985-2000 drain piping complete with 6 mm thick aluminum laminated XLPE tubular insulation fitting support as per specification 25 mm Dia

Supply, testing, installation of 2 core x 1.5 mm copper wire with PVC conduit as per specification (For transmission)

Supply, testing, installation of 2 core x 1.5 mm copper wire with PVC conduit as per specification (For Remote)

Supply, testing, installation of 3 core x 2.5 mm copper wire for power supply for indoor unit t as per specification

Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting for air distribution complete with neoprene rubber gaskets, elbows, splitter, dampers, vanes, hangers supported etc as per approved drawing and specification of following sheet thickness complete as required 24 Gauge

Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting for air distribution complete with neoprene rubber gaskets, elbows, splitter, dampers, vanes, hangers supported etc as per approved drawing and specification of following sheet thickness complete as required 22 Gauge

Supply, installation, testing and commissioning of GI volume control duct damper complete with neoprene rubber gasket, nut, bolt, screws linkage, flanges etc as per specification

Supply installation, testing and commissioning of opposed blade aluminum volume control collar dampers(in mat black finish) in supply air grill/diffusers collar damper shall be aluminum body and blade aluminum construction complete with nut bolt screw linkers etc as per approved shop drawing and specification

Supply and fixing of powder coated extracted aluminum supply air grill with aluminum volume control dampers complete as required

Supply and fixing of powder coated extracted aluminum return air grill with louvers but without volume control dampers complete as required

Supply and fixing , testing and commissioning of supply/return air diffusers of powder coated aluminum volume control dampers with anti smudge ring & removable core

Supply and fixing , testing and commissioning of return air diffusers of powder coated aluminum without volume control dampers with anti smudge ring & removable core

Supply and fixing , testing of round shape butterfly damper of MS construction if following size Butterfly damper 250 mm

Supply and fixing , testing of round shape butterfly damper of MS construction if following size Butterfly damper 300 mm

Supply and installation of Spill air boxes for air distribution above the diffuser/grill 450mm

Supply and installation of Spill air boxes for air distribution above the diffuser/grill 300mm

Supply and installation of pre insulated flexible duct for connection between butterfly damper to spill air boxes same shall be along with necessary clamps 250mm Dia

Supply and installation of pre insulated flexible duct for connection between butterfly damper to spill air boxes same shall be along with necessary clamps 300mm Dia

Supply fabrication installation and testing the flexible connection constructed of fire resistance flexible double canvas as per the approved shop drawing

Supply installation and testing of fresh air/exhausted air powder coated anodized extracted aluminum construction fresh air louvers(50mm deep)(Fresh air louvers with VCD, bird screen& rattle-free) complete as per specification

Supply and installation of Nitrile rubber closed cell insulation materials with antimicrobial property. 9 mm thickness insulation

Supply and installation of duct acoustic insulation inside the duct with open cell XLPE to be applied using manufacture 10mm thick acoustic lining complete as required and as per specification.

Supply and erection of GI perforated cable tray with DA gray paint on the existing surface with the help of MS angle iron MS perforated cable tray size 200mmx50mmx 25mm(2mm) support(to be painted with approved paint) of given size to be fixed with fasteners/nut& bolt etc on the duly painted, L-angle, U bended type support complete in all respect as desired MS perforated cable tray size 200mmx50mmx 25mm(2mm)

TRANSCEND CONTRACTS PVT. LTD.

CONSISTENT AIRCON PVT LTD