Supply and Construction of Amn Bkr (50 MT) with OHP

Construction Material :- Cement 43 Grade OPC packed in HDPE bag each 50 kg wt Conform to IS 8112-1989 (Make: Birla Gold/Ambuja/ Ultratech/ACC /JK/ Dalmia or equivalent.

Coarse Sand free from vegetation

Coarse aggregate 20mm graded

Coarse aggregate 40mm graded

Hardcore 63-90 mm graded

AAC Blocks of size 600x200x150mm (Make:Brikolite/NCL/Nuconor/equivalent.)

Mild Steel Bars of size 8 mm dia Conform to IS 432 (Part 1) 1982 (TMT Bar) (Make- TATA/ SAIL/ JSW or equivalent.)

Mild Steel Bars of size 10 mm dia Conform to IS 432 (Part 1) 1982 (TMT Bar) (Make- TATA/ SAIL/ JSW or equivalent. )

Mild Steel Bars of size 12mm dia Conform to IS 432 (Part 1) 1982 (TMT Bar) (Make- TATA/ SAIL/ JSW or equivalent. )

Mild Steel Bars of size 16 mm dia Conform to IS 432 (Part 1) 1982 (TMT Bar) (Make- TATA/ SAIL/ JSW or equivalent.)

MS Binding wire : Make (TATA/ SAIL/ JSW or equivalent.)

Wooden plank for shuttering II class wood of size 3.0 x0.3 x0.026 m

Acrylic emulsion paint of approved brand on new concrete surface of Make : berger/Asian/Nerolac/equivalent

Wooden Scantling various size

Oil bound distemper (washable Quality) of proprietary brand of ( Make : Berger/Asian/Nerolacor equivalent.)

Synthetic enamel paint any colour as directed conforming to IS 5-2004 ( Make : Berger/Asian/Nerolac or equivalent.)

Steel props of size 2 mtr long, 80 mm dia, adjustable upto 4 Mtr height nad as directed

Water Proofing compound (Make : Pidilite/Dr.fixit/ Fevicol) Confirming to IS 2645-2003

Painting brush 4'' (ISI Marked)

Nails various sizes

MS frame work for roof trusses, purlin, rafter and MS plate etc all as directed (Make : TATA/SAIL/JSW):- (a) MS RHS of size 80X40X3.2

(b) MS Plate of size 8mm thick

MS Nuts and bolts of length 100mm fully thread suitable for 10 mm dia nuts including two numbers of washers and 25mm of shank and two nos of washers 3 mm thick complete all as directed.

PPGI Sheet, 0.55 mm thick of size10ft x3 ft of make: SAIL/TATA/JINDAL incl treating galvanised surface with mordant solution and two coat of synthetic camoglage paint over one coat of red oxide primer of make(BERGER/ASIAN/ NEROLAC or equivalent.)

PPGI ridge sheet of 0.63mm thick of 90cm wide of make: SAIL/TATA/JINDAL incl treating galvanised surface with mordant solution and two coat of synthetic camoglage paint over one coat of red oxide primer of make(BERGER/ASIAN/NEROLAC or equivalent.)

Self taping steel screw half thread with rawl plug of 1 1/2" size (ISI Marked) (100 Nos/Pkt)

HDPE sand bags OG colour of size 0.75x0.375x0.15

Door size (3.0X2.10m double leaf) MS sheet for door (2mm thick) frame \9chowkat) made of steel equal angle iron 55x55x6mm (ISI Grade),shutter made up of steel equal angle iron frame 35x35x5mm (ISI grade flat iron for stiles (25mm width and 5mm thick)holdfast 450mm long welded either side of anglle iron frame including hinges (06 Nos) tower bolt 150mm long (04 Nos). Bow handles (04 Noa) and sliding bolt 12mm dia 300 mm long with locking arrangement completeb both side and openable outside complete along the wall. Note : The door shall be made of steel suitable painted in Olive Green colour with two coats of red oxide primer.

Door size (1.80X2.10m double leaf) MS sheet for door (2mm thick) frame (chowkat) made of steel equal angle iron 55x55x6mm (ISI Grade),shutter made up of steel equal angle iron frame 35x35x5mm (ISI grade) flat iron for stiles (25mm width and 5mm thick) holdfast 450mm long welded either side of anglle iron frame including hinges (06 Nos) tower bolt 150mm long (04 Nos). Bow handles (04 Nos) and sliding bolt 12mm dia 300 mm long with locking arrangement complete both side and openable outside complete along the wall. Note : The door shall be made of steel suitable painted in Olive Green colour with two coats of red oxide primer.

Ventilator with Grill of size (600X400 mm) Ventilator (Loop Hole) frame for steel angle of size 35x35x5mm(ISIGrade). Grill made of TMT bar 12mm dia with welding. The items shall be suitably painted with weather resistance and fire proof paint over one coat of red oxide primer (Make: TATA/ ISPAT/ SAIL)

Gate size (3.0 mx 2.0m double leaf) Frame made of anlgeiron 75x 75x6mm (ISI Grade), with shutters made of reinforemnt (TMT Bar 12 mm dia), flat iron for stiles (25mm width and 5m thick) holdfast 450mm long welded either side of anlgeiron frame including hinges(06 Nos). Bow handle (04 Nos) and Sliding bolt 12mm dia 300mm long with locking arrangement with comlete both side and openable inside completely along the wall. Note : Gate shall be made of steel suitable painted in olive Green colour with two coats of red oxde primer.

Anti corrosive red oxide zinc chromate primer conforming to IS 5-2004 (Make : Berger/Nerolac/Asian or equivalent

While Lime

Waterproofing compound (Make : Pidilite/Dr.Fixit/Fevicol or equivalent

Cement based paint (Snowcem) of Make : Asian/Berger/Nerloac or equivalent

Construction Material for Drain & Sump:- Cement 43 Grade OPC packed in HDPE bag each 50 kg wt Conform to IS 8112-1989 (Make: Birla Gold/Ambuja/ Ultratech/ACC /JK/ Dalmia or equivalent.

Coarse Sand free from vegetation

Coarse aggregate 20mm graded

Coarse aggregate 40mm graded

Hardcore 63-90 mm graded

Brick Sub Class 'B'

Three phase 1.2 HP Monoblock pump 430 Volt complete with and incl 3 Mtr length required size flexible suction pipe, foot valve and connected accessories complete all as specified and directed (incl tasting x comminssining)

Lightening Conductor:- Air termination single pointed aluminium rod 12 mm dia and 300 mm long.

Testing point terminal block make of gun metal & phosphorus bronze size 75 x 75 x 25 mm drilled and screwed including 3 Nos 8 mm dia 25 mm long hexagonal head screw

Aluminium strips 25 x 3.0 mm

Galvanized Iron strip 32 x 6 mm

Earthing plate 600 x 600 x 6 mm Galvanised steel suitable for GI strip fittings, drilled with 2 Nos holes for 6 mm dia near one side.

Charcoal

Salt Normal

CI earth pit cover of size 300 x 300 x 6 mm with Angle iron of size 20x20mm, 3 mm thick with MS frame.

Nut bolt 6mm dia 30 mtr dia with check nut and washer

GI pipe 40mm dia mtr 2.5 mtr (Make:-Jindal/Tata/Kalinga)

Insulating PVC block 75x75x30 mm with insulating clamp nut and bolt (Make:-Presto/Polycab/Finolex)

WATER PROOFING ITEMS:- (a) (Wall (Vertical)):- Non woven Geotextile 500gsm as seperation layer between wall & PVC mebbrance with provision of PVC disk & anchor faster. Properties of Geotextile 500 gms Thickness at 2 KN/m - 3.3 Mass per unit area - 500g/m Tensile strength - 28 KN/m Elongation - 60%

2 mm thick PVC-P water proofing membrane. Properties of 2 mm thick PVC-P Water proofing membrane thickness - 2 mm+5% Tensile Strength ->16N/mm Elongation ->300% Cold folding resistance - no cracks at -20 Degrees Celsius Resistance under water pressure - waterproof at 10 bar/10hrs

Non woven Geotextile 500gsm as protective layer of PVC waterproofing mebbrance with provision of high quality adhesive for non-woven geotextile 50gsm. Properties of Geotextile 500 gms Thickness at 2 KN/m - 3.3mm Mass per unit area - 500g/m Tensile strength - 28 KN/m Elongation - 60%

(b) Floor (Horizontal):- Non woven Geotextile 500gsm as seperation layer between foundation & PVC mebbrane. Properties of Geotextile 500 gms Thickness at 2 KN/m - 3.3 Mass per unit area - 500g/m Tensile strength - 28 KN/m Elongation - 60%

2 mm thick PVC-P water proofing membrane. Properties of 2 mm thick PVC-P Water proofing membrane Thickness - 2 mm+5% Tensile Strength ->16N/mm Elongation ->300% Cold folding resistance - no cracks at -20 o Celsius Resistance under water pressure - waterproof at 10 bar/10hrs

Non woven Geotextile 500gsm as protective layer of PVC for PVC membrane Properties of Geotextile 500 gms Thickness at 2 KN/m - 3.3mm Mass per unit area - 500g/m Tensile strength - 28 KN/m Elongation - 60%

(c) Deck Slab (Horizontal): Non woven Geotextile 500gsm as seperation layer between deck slab & PVC mebbrance. Properties of Geotextile 500 gms Thickness at 2 KN/m - 3.3 Mass per unit area - 500g/m Tensile strength - 28 KN/m Elongation - 60%

2 mm thick PVC-P water proofing membrane. Properties of 2 mm thick PVC-P Water proofing membrane Thickness- 2 mm+5% Tensile Strength ->16N/mm Elongation ->300% Cold folding resistance - no cracks at -20o Celsius Resistance under water pressure - waterproof at 10 bar/10hrs

Non woven Geotextile 500gsm as protective layer of PVC waterproofing mebbrance with provision of high quality adhesive for non-woven geotextile 50gsm. Properties of Geotextile 500 gms Thickness at 2 KN/m - 3.3mm Mass per unit area - 500g/m Tensile strength - 28 KN/m Elongation - 60%

High quality adhesive for termination of PVC water proofing membrane at doors/ ventilators

Retaining wall (48.00 Mtr x 4.00 mtr height) 8 Mtr x 3 Mtr x 6 Nos = 48 Mtr:- Cement OPC 43 Grade packed in HDPE bag each 50 Kg wt (Make:-Birla Gold/Ambuja/ Ultratech/ACC/JK/ Dalmia/equivalent)) Confirming to IS 8112 - (2013)

Coarse sand free from vegetation Confirming to IS 650 - 1991 (Reaffirmed 2008)

Coarse Aggregate 40mm graded Confirming to IS 383 - 2016

Stone boulder 9" to 12" Confirming to IS 1597 Part- I - 1992 (Reaffirmed 2002)

PVC Pipe 75mm dia 3 mtr long Make: Prince /Finolex/Supreme/equivalent Confirming to IS 4985 - 2000 (Reaffirmed 2006)

PARBIN SIDDIKI (BID ID -3279090)

NAMO ENTERPRISES (BID ID -3279379)

M/S YESHI THINLEY (BID ID -3279093)