Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.6 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹40.4 L+₹1.8 L (4.56%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | L3₹40.8 L+₹2.2 L (5.73%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 4 | L4₹41.3 L+₹2.7 L (6.90%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 5 | L5₹41.6 L+₹3.0 L (7.75%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN LOWEST BIDDER |
Tender Value
₹37.5 L
EMD Value
₹75,000
Closing Date
24 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 869 EWS
GE 869 EWS PIN-913869 C/O 99 APO
PROVN OF VEH ASSY AREA AND COVERED BAY NEAR BLDG NO T-444 AND T-123 AND CERTAIN REVENUE AND MINOR WORKS AT LEIMAKHONG MIL STN
2023_MES_577176_1
8463/E8
Open Tender
Civil Works
Item Rate
210 days
LEIMAKHONG MIL STN
AS PER TENDER DOCUMENTS
2 documents required · 2 mandatory
₹500
GE 869 EWS
₹75,000
Yes
1 May 2023
25 Jan 2023
25 Feb 2023
25 Jan 2023
24 Feb 2023
11 Feb 2023
Amount
Schedule 'A'
Surface exvcavation n exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil completed all as specified and directed.
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation n.exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.
Returning,filling in including spreading ,leveling ,waterring and well ramming in layers not exc 25cm with excavated soil completed all as specified and directed.
M&L for providing cement concrete type B1 1:2:4 (20mm graded aggregate) as in copings completed all as specified and directed.
M&L for 40mm thick Damp proof course in cement concrete 1:2:4 type B0 with using liquid WPC at the rate of 200ml per bag (50kg) of cement and using necessary formwork complete all as specified and as directed.(Note: Integral water proofing compound shall be measured and paid separately.)
Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.
M&L hardcore of gauge n exc 63mm, broken stone or boulders deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface completed all as specified and directed.
M&L for brick work with subclass ‘B’ bricks, (locally available best quality) old size bricks straight or curved on plan exc 6 m means radius, built in cement mortar (1:6) complete all as specified and directed.
M&L rendering 15mm thick on other than fair faces of brick work or concrete surfaces in CM 1:6 finishing even and smooth without using extra cement completed all as specified and directed. (Using Dimapur sand)
M&L for rendering 15mm thick on other than fair faces of brick work in cement mortar (1:4) using water proofing compound @2% by weight of cement as per manufacture instruction and finishing the surface even and smooth without using extra cement complete all as specified and directed.(Using Dimapur Sand) [Note: WPC will be measured and paid separately)
Supply of Integral WaterProofing Compound ISI Marked completed all as specified and directed.
M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation,filling and mass concrete etc complete all as specified and directed
M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in plinth protection finishing surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick, screed bed in CM (1:4) completed all as specified and directed.
M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations completed all as specified and directed.
S& F aluminium anodised sliding window, 3 track system, fully glazed fitted with one side visible glass of 5.5mm thick, shutter frame size 44 x 24 x 1.8mm including chowkat of size 80 x 40 x 1.8mm and sliding fly proof shutter (using stainless steel wire cloth of gauge 0.50mm dia and aparture 1.18mm) with three track , including aluminium grill on out side throughout & providing necessary jointing cleats ,glazing clips,rubber packing, anodised aluminium snap beading,handle,screw complete all as specified and as directed.
M&L for 75 mm thick PCC 1:4:8 grade (Nominal mix) Type D2 using 40mm graded crushed stone aggregate as in sub base complete all as specified and directed.
M&L 25 mm thick cement concrete type B0 1:2:4 using (12.5 mm graded stone aggregate) in floor finishes even to receive floor tiles completed all as specified and directed.
M&L for screed bed or beding layer of mortar 20mm thick in cement mortar 1:3 for laying floor finishes completed all as specified and directed.
M&L for Joint free Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15 mm thick screed bed in CM 1:6 completed all as specified and directed.
M&L for Joint free Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting and dado etc etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 10 mm thick screed bed in CM 1:4 completed all as specified and directed.
M&L for wall care putty not less than 2-3 mm thick of newly plastered surface of wall as per manufacturer instructions completed all as specified and directed.
M&L for preparation of new decorated surfaces of wall applying two coat of cement base paint and one coat primer complete all speciified and directed
M&L for preparing new plastered surfaces of walls and applying two coats of oil emulson distemper over one coat of wall primer complete all as specified.
M&L for 2nd class hardwood plain , solid, straight chowkhats and frames wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.
S&F 30mm thick factory made flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides kiln seasoned and chemically pressure treated complete all as specified and as directed.
S&F sheet glass 3mm thick, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified and as directed.
S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.
S&F exposed GI powder coated snap grid frame work for false ceiling of grid size 600mmx600mm comprising of wall/cleat angle of size 25x25x0.35mm and main/cross tee of size 24 x38x0.70mm with 4mm dia GI wire as suspender and including 4mm thick plain E-Board including fixing arrangement from steel truss of any type and applying two coats of oil bound distemper over one coat of chalk whiting complete all as specified and directed.
S & F Pre painted galvalume aluminium zinc coating GI Based plain steel sheet of 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering/cladding to wall fixed with self tapping screws completed all as specified and directed.
S & F Pre painted galvalume aluminium zinc coating GI Based semi corrugated steel sheet of 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering/cladding to wall fixed with self tapping screws completed all as specified and directed.
S&F 2nd Class H.W Glazed and skelton shutter 30mm thick open rebated and prepare to receive glass, gauge etc with sash bars divided into square with plain chemfered or rounded mitred and rebated sash bars any member as in windows ventilator stilles and rails provided as per SSR part -I Sector 8 clause 8.24 (b) completed all as specified and directed..
S&F mild steel flat iron as in hold fast including screwing or welding completed all as specified and directed.
Supply and fixed 2nd class HW small fittings such as brackets of any type, latch and hing block, saved door and window stops and the like including all necessary labours articles n exc 200 cu cm each completed all as specified and directed..
S&F 100 mm butt hinges medium weight cold rolled mild steel completed all as specified and directed.
S&F 150 mm long aluminium alloy handles,fabricated type, anodised completed all as specified and directed.
S&F in mild steel helical door spring 300mm long ordinary rat tail pattern including roller plate completed all as specified and directed.
S&F aluminium anodised 150 mm barrel tower bolts of extruded section completed all as specified and directed.
S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.
S&F floor door stoper of aluminum alloy body & tougues anodised with hard drawer steel spring fixed in floor of 150mm size complete all as specified and directed. .
M & L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer on wooden surfaces complete all as specified and directed.
S & F steel work in tubular or square trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to Fe 410-W (Gde-E-250 quality A) complete all as specified and as directed.
S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sucnk) forming holes with any attachement Fe 410W (Gde-E-250) complete all as specified and directed.
S&F structural steel work in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410-W (Grade E-250) quality-A complete all as specified and as directed.
M&L for preparation of new or previously untreated surfaces of steel of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L for 2nd class hardwood weather boarding, clean sawn, plain, 20mm thick or feather edged 15mm to 20mm and fixed with 30mm laps complete all as specified and directed
Excavating in post holes (or similar holes) each n.exc 0.5cum getting out returning filling in and ramming earth or boken rubble mixed with earth around in layers not exc 25cm watering and removing surplus soil to a distance n exc 50m and making good surface in soft and loose soil completed all as specified and directed.
M&L for PCC 1:3:6 typeC2 40mm graded aggregate in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and post (including caps and bases) complete all as specified and directed..
S&F Plain, galvanised, mild steel sheeting 0.63mm thick, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 completed all as specified and directed.
M&L for 100mm thick cement concrete type B1 1:2:4 using 20mm graded stone aggregate, finishing cement concrete surface even and smooth without using extra cement completed all as specified and directed.
M & L for Forming 20mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ thickness of slab 100 mm complete all as specified and directed.
M & L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade 'A' complete all as specified and directed.
M&L for Prepration of new plastered surfaces of walls and applying three coats of white wash completed all as specified and directed.
Exvcavation over areas n exc 1.5 m deep and a getting out in soft/loose soil completed all as specified and directed.
Ditto as per item No 55 but for each additional 1.5 mtr or part there of in depth beyond the first 1.5m completed all as specified and directed.
M&L for Brick work with sub-class `B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:6 complete all as specified and directed.
Material and labour for brick work with sub class “B’ bricks in one brick thick in honey comb walling in cement mortar (1:4) complete all as specified and directed.
S&F rolled sections as in mains and cross beams, hips and jack rafters, purlins where connected common rafters and running rails and guides for sliding doors and cleats or other connecting plates including necessary bolts, Fe 410-W (Gde-E-250) quality complete all as specified and directed.
M&L for Reinforced cement concrete (nominal mix) type B-1 (1:2:4) using 20mm grade stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and directed.
Ditto,as per item No 61 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.
Use & waste Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.
Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.
S&F Butt hinges 100 mm, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.
S&F 150mm long alumiunium handles cast type anodised complete all as specified and directed.
S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
M&L non - skid Ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade including 15mm thick screed bed or bedding layer of mortar for laying floor finishes in CM 1:6 including dismantling of tile complete all as specified and directed.
M & L for Glazed Coloured Ceramic tiles in vertical surface 350x250x7mm / 450x350x7mm thick jointless set and joint in neat cement slury and pointed in white or colour cement to match over and including 10mm thick plaster in CM 1:4 as backing coat to receive tiles complete all as specified and directed.
S&F PVC flushing cistern syphonic action type,10 litters capacity, low level white with inlet ball, valve, float and handle including bracket ,PVC Connection and flush pipe complete all as specified and as directed.
S&F bib tabs 15mm dia cast copper alloy with chromium plated fancy type complete all as specified and directed.
S&F GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
S&F GI tubing 20mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
S&F rotational moulded polyethylene water storage tank 500 litres capacity of multilayered layer wall construction (Cylindrical, vertical with closed top) hoisted and fixed in position including all necessary inlet/outlet connections & brass ball valve complete all as specified in SSR Part-I and as directed.
S&F 20mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.
S&F 15mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
S&F PVC SWR pipes 110 mm bore single socketed in any length with rubber ring joint fixed to wall or laid in trenches or in floors with steel clamps complete all as specified and directed . Make : Supreme/ Finolex.
S&F PVC SWR pipes 75 mm bore single socketed in any length with rubber ring joint fixed to wall or laid in trenches or in floors with steel clamps all as specified and directed.
S&F PVC SWR bends of 110 mm bore complete all as specified and directed.
S&F PVC SWR bends of 75 mm bore complete all as specified and directed.
S&F PVC (SWR) junction single (single T) equal or unequal provided with access door of 110 mm dia complete all as specified and directed.
S&F PVC (SWR) junction single (single T) equal or unequal provided with access door of 75 mm dia complete all as specified and directed.
S&F PVC (SWR) floor trap plain including greating jointing with solvent cement 75 mm dia complete all as specified and directed.
S&F PVC (SWR) reducer of 110 mm dia complete all as specified and directed.
S&F PVC (SWR) vent cowl 75 mm bore complete all as specified and directed.
S&F 110mm PVC (SWR) WC connector with lip ring all as specified complete all as specified and directed.
M&L Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required 150 mm complete all as specified and directed.
S & F in repairs 15 mm pillar taps fancy type longs cast copper alloy with capstan heads chromium platedscrewed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed as in repairs complete all as specified and directed.
S&F in repairs Wash hand basin, vitreos china, superior colour flat back of size 580 X 450 mm with pedestal, including cutting for & pinning in ends of brackets or erecting stand including brass waste coupling, waste pipe as in repair, complete all as specified and directed.
S&F in rep PVC connections 15 mm size with PTMT nuts of length 450 mm as in repairs complete all as specified and directed.
S & F in repairs 15mm bore dia of pipe stop valves, but fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both pipe or for unions and fixed complete all as specified and as directed.
M&L for prepraration of new or previously untreated surfaces of wall and applying two coats of oil bound distember over a coat of chalk whiting complete all as specified and directed.
M&L for prepraration of new or previously untreated plaster surface of wall and applying two coats of acrylic exterier grade paint over a coat of primer complete all as specified and as directed.
Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.
S&F Waste coupling of PTMT 32mm bore sutable for urinals complete all as specified and directed.
S&F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) PVC valveless, syphonic action type, flushing cistern,low level, white, with inlet,ball valve, float and handle including brackets Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed.
M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick set jointed with grey cement and pigments and pointed in neat cement slurry in floors including 15 mm thick sreed bed in CM 1:4 complete all as specified and directed.
S&F Mild steel bolts. purpose made. with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. exc 30cm long exe 30cm long Exc 20 n exc 25. complete all as specified and directed.
Material and labour for point wiring surface type with two single core 1.5 Sq mm (nominal area) FRLS PVC insulated and unsheathed, multi-stranded, copper conductor cable in and including suitable size PVC casing capping with all fittings and fixing accessories and suitable size PVC box for mounting switches, regulator etc including multi-strand PVC insulated unsheathed stranded copper cable as earth continuity conductor of size 1.5 Sq mm and connecting to light fitting/fans etc complete all as specified and directed for following :- (Colour code to be followed) One light/fan point controlled by one, one way switch
One socket outlet 5 Amps 5 pin on indipendent board complete all as specified and directed.
One socket outlet 5 Amps 5 pin on same board complete all as specified and directed.
All as per item No. 105 here in before but with cable size 2.5 Sqmm and earth continuity conductor of 2.5 Sqmm size for one 5 pin 15 Amps socket out let on independent board complete all as specified and directed.
S&F modular switch piano, 6 Amps, single pole, one way complete all as specified and directed.
S&F modular switch piano, 16 Amps, single pole, one way complete all as specified and directed.
S&F modular socket outlet 2/3 Pin 6 Amps combined 2 module complete all as specified and directed.
S&F modular socket multipurpose 3 pin 16 Amps and 3 pin 6 Amps combined 2 module complete all as specified and directed.
S&F blank spacer plate for single module complete all as specified and directed.
S&F Ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body complete all as specified and directed.
S&F modular white cover with frame for fixing of 12 module complete all as specified and directed.
S&F modular white cover with frame for fixing of 8 module complete all as specified and directed.
S&F modular white cover with frame for fixing of 3 module complete all as specified and directed.
S&F sheet metal enclosure for MCB’s distribution board, 240 Volts, 4 ways single pole and neutral including 200 Amps rated busbar, neutral link, din rail double door verticle for breaking capacity 10 KA complete all as specified and directed.
S&F MCB single pole and neutral 32 Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed.
S&F MCB single pole 06 to 32Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed.
S&F PVC Board (30 x 25 x 5) cm depth medium quality ISI marked complete all as directed.
S&F LED tube light fitting 1 x 22W, 230V, AC decorative box type surface and wall mounted LED batten with polycarbonate housing and integrated electronic driver , holder including LED tube light connecting up with three core LED 6500K basic all purpose surface and wall mounted LED vatten with polycarbonate housing & integrated electronic driver complete all as specified and directed.
S & F of 1100 volts grade heavy duty cable PVC insulated aluminium condiuctor served with inner sheating of PVC tape and over all PVC sheathed in serv ice connection suspended by insultingnhangers not more than one meter apart including 4 mm suspension wire one twin core cable 2 core flat of 10 sqmm size complete all as specified and directed
S&F metal exhaust fan AC single phase 230 volts of size 300mm sweep with louvre complete fixed and opening of wall with suitable MS bolts, grouted to wall and connecting up including provision of cable from connector to fan with flexible cable 24/0.2mm with copper conductor and necessary fitting complete all as specified and directed.
Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanized earth strip of size 25x4mm by means of galvanized iron or steel bolts nuts check nuts and washers and other end connected with earthing testing point including providing suitable testing points as directed including funnel, watering pipe of 20mm bore, light grade galvanized iron pipe, wire mesh charcoal of coal dust and common salt in alternative layer all around the earth electrode compacted thickness 15cm with concrete pit in PCC 1:3:6 type C1 50mm thick pre cast RCC 1:2:4 type B1 cover slab set in CM (1:4) re-enforcement with 8mm dia deformed bars @ 15cm C/C and suitable handle of 10mm dia MS round bars, including earth work in hard/dense soil as required complete all as shown in electrical plate No 3 of MES Schedule Part I and testing on completion all as specified and as directed..(Note;Earth strip beyond 7.5 m length will be measured & paid separately)
M/s Nongmaithem Construction
L BINOD CONSTRUCTION CO
SHARMA ENTERPRISE
APPLE CONSTRUCTION
MAURYA CONSTRUCTIONS
M/S PRADEEP CONSTRUCTION
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .