PROVN OF ADDITION/ALTERATION TO BLDG NO P-356 AT SHARIFABAD MIL STN UNDER AGE (I) CIF (K).

Amount

B/R Works: Demolition of cement concrete un reinforced in ground floors and pavings not exceeding 15cm thickness (below or above ground level) including disposal of unserviceable materials,debris and rubbish to a distance not exceeding 100 metre, complete all as specified and as directed by the Engineer-in-Charge.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed by the Engineer-in-Charge.

Plain cement concrete, 1:2:4, type B-1 using 20mm graded crushed stone aggregate, 25mm thick, as in leveling coarse of flooring, complete all as specified and as directed by the Engineer-in-Charge.

Vetrified Ceramic tiles Dark shade/Double charged/ Ultracharged 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.42 sqm but not exc 1.0 sqm each, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured, laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and as directed by the Engineer-in-Charge. Note: Colour and shade of tiles shall be approved by AGE(I) and contractor shall not have any claim whatsoever on this account.

Vetrified Ceramic tiles Dark shade/Double charged/ Ultracharged 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.42 sqm but not exc 1.0 sqm each, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured, fixed over and including 10mm thick rendering (bedding layer) on brick/concrete surface in cement mortor 1:4, complete all as specified and as directed by the Engineer-in-Charge. Note: Colour and shade of tiles shall be approved by AGE(I) and contractor shall not have any claim whatsoever on this account.

Glazed ceramic tiles, coloured, of size 300 mm x 450mm, thickness not less than 7mm as in vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match the shade of tile, fixed over and including 10mm thick rendering (bedding layer) on brick/concrete surface in cement mortor 1:4, complete all as specified and as directed by the Engineer-in-Charge. Note: Colour and shade of tiles shall be approved by AGE(I) and contractor shall not have any claim whatsoever on this account.

Taking down plastering in cement lime or cement mortor on brick or stone work etc. including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed by the Engineer-in-Charge.

Demolition of brickwork or stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles, complete all as specified and directed by Engineer-in-Charge.

Brick work with sub class `B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6, complete all as specified and directed by the Engineer-in-Charge.

Rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:6, surface finished even and smooth without using extra cement, complete all as specified and directed by the Engineer-in-Charge.

Rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:4, surface finished even and smooth without using extra cement, complete all as specified and directed by the Engineer-in-Charge.

M&L 20mm Granie (of any type) work( table rubbed and polished) in steps, jambs , pillars, window cills, cooking platforms, and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as spd and directed.

Rounding/moulding to edges of Kota stone slabs, marble stone, granite stone slabs one edge, such as in steps, cooking platform , and other similar situations etc, complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggr) as in plinth protection/path finishing the surface even and smooth without using extra cement , complete all as specified and directed.

Taking up or down steel tubing and connections, 15 mm bore, including cleaning for refixing, complete all as specified and directed by the Engineer-in-Charge.

S&F 15mm bore GI tubing medium grade including all fittings complete to wall and ceiling or laid in floor, complete all as specifed and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc,; and cutting chases for concealed water tubing or concealed conduit wiring etc., and making good, cutting exc. 10 cm but not exc 20 cm girth in brick/stone walls, complete all as specified and directed by the Engineer-in-Charge.

Vitreous China, wash hand basin, flat back white of size 550mm x 400mm including brackets, waste coupling of PTMT (half or full threaded) (Minium weight 32mm -45grms/40mm-60grms) with long screwed shank and fly nuts, 32mm dia PVC waste pipe, chain and plug, porcelain stopper including cutting for and pinning in ends of brackets or erecting stand, fixed in repairs, complete all as specified and directed by Engineer-in-Charge

Supply in fixing in repairs sink made Stainless steel sink1mm thick kitchen or laboratory with plugs, washer and wastes pipe , including bedding in cement mortar on dwraf wall or including fixing cantilever brackets and connecting union pipe, over all size 495 x 420 mm bowl size 410mm x330mm x160mm, complete all as specified and directed.

Bib taps, 15mm bore, cast copper alloy, chromium plated, fancy type with crutch or butter fly handle, screwed down, screwed for iron pipe, or brass ferrule and fixed in repairs, complete all as specified and as directed by the Engineer-in-Charge.

Pillar taps, 15mm bore, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered `Hot’ or `Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repairs, complete all as specified and as directed by the Engineer-in-Charge.

Stop valves/angle valve 15mm bore, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repairs, complete all as specified and as directed by the Engineer-in-Charge.

PVC connection 15mm size with PTMT nuts of length 450mm, fixed in repairs, complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair sheet glass assemble consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair tubular towel rail aluminume anodised 20mm dia, D type, 60 cm long with brackets, complete all as specified and directed.

S&F in repairs harrison rail/curtain rails, mild steel chromium plated with fixing brackets, stops, rollers etc,complete all as specified and directed by Engineer-in-Charge.

Taking down chowkat or frames with shutters (without taking off shutters from the frames) area n.exc 1.5 Sqm each including cutting holes for taking out hold fasts, dismantling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost) , complete all as specified and directed by the Engineer-in-Charge.

Taking down chowkat or frames with shutters (without taking off shutters from the frames) exc. 1.5 Sqm but n.exc 4 Sqm each including cutting holes for taking out hold fasts, dismantling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost), complete all as specified and as directed by the Engineer-in-Charge.

Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and as directed by the Engineer-in-Charge.

Demolition and breaking up of drain pipes 100mm bore (Salt glazed ware/AC pipe/reinforced concrete pipe/PVC pipe ) set in cement mortar including concrete bed & haunching (if required) and removing away complete from site, complete all as specified and asdirected by the Engineer-in-Charge.

S&F PVC (SWR) pipes, 75mm dia, single socketed, in any length with rubber ring joints, fixed to wall,complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair PVC (SWR)bends (any radious), 75mm bore, diminishing pieces or tapers, complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair PVC (SWR) multi floor trap with grating suitable for 75mm dia grating including jointing with solvent cement, complete all as specified and asdirected by Engineer-in-Charge.

S&F in repair grating doom 125mm with waste hole PTMT (min weight 40 gram).

Preparation of old painted wooden or wood based surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed by the Engineer-in -Charge.

Preparation of new plastered / unplastered surfaces of walls and applying two coats of distemper oil emulsion over 3mm thick wall care putty, complete all as specified and as directed by Engineer-in-Charge.

Complete removal of existing treatment on wall including cleaning by brooming down or with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots etc. and applying 3mm thick wall care putty including scrapping to finished smooth and applying two coat of oil bound distemper over a coat of primer, complete all as specified and as directed by the Engineer-in-Charge.

Applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance asper IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including primingcoat of exterior primer applied @ 0.90 litre/ 10 sqm over old painted surfaces, complete all as specified and as directed by the Engineer -in -Charge.

Preparation of newly untreated steel or iron surfaces of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide or zinc chromate,complete all as specified and as directed.

Dismantaling boarding/false ceiling of any description fixed in any postion with nails, complete all as specified and as directed by the Engineer-in-Charge. .

GI frame work size of grid 605 x 605 mm for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from sofit at approx 900 mm centre to centre with GI cleat and steel expansion fasterner with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips acress the intermediate channel at 457mm centre to cnetre including hangers 6mm dia.GI (upto 1200mm length) adjusting level fixed tp roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm ling and expansion hold fasterner 12.5mm dia 40mm long including 12mm thick Gypsum board of size 600mm x 600mm fixed or laid/inserted to timber/GI frame work complete all as specified and directed by Engineer-in-Charge.

S&F 2nd class soft wood boarding, 13mm thick, as in wall panelling supplied & fixed with nails in any situation, Planed one side and edges tongued and grooved or rebated, fixed in any situation over 12mm thick plyboard runner including french polishing on exposed surface of any description including cleaning and preparing the surface a coat of wooden filler upto satisfaction of the Engineer-in-Charge.

Dismantling timber scantling under 40 sq. cm in section in fillets, rails, posts, rafters, purlins, etc., unframed work, complete all as specified and as directed by the Engineer-in-Charge.

Plain fillets. square, rectangular or triangular in section, made of 2nd class soft wood (Kail), wrought, secured with nails or brads, sectional area exceeding 13sqcm but not exceeding 25 sqcm, complete all as specified and as directed by the Engineer-in-Charge.

Plain cement concrete 1:2:4, type B-1 using 20mm graded crushed stone aggregate as in lintels upto 1.50 metres clear span, steps, seismic and other similar bands, coping, bed plates for serving hold fasts, filling in mild steel frames etc. and the like including weathering slighting rounded or chamfered angles and throating, and use of form work (straight or curved), complete all as specified and as directed by the Engineer-in-Charge.

Plain cement concrete 1:4:8, type D-2, using 40mm graded crushed stone aggregate, as in foundation filling and mass concrete in suken portion of slabs, complete all as specified and asdirected by the Engineer-in-Charge.

S&F 10 mm thick toughned glass as in hinged door, partition automatic doors and similar work including cutting shape, drilling holes, grinding/polishing and rounding off edges of glass, including fancy type door handle,hinges and other fixing arrangement etc, complete all as specified and as directed by the Engineer-in-Charge.

Demolition of reinforced cement concrete in beam/slab and similar suspended work complete all as specified and as directed by the Engineer-in-Charge.

M&L for providing reinforced cement concrete nominal mix type B1 1:2:4 ( using 20 mm graded stone aggregates) as slabs supported on walls, beams and columns in floors,roofs,landings,balconies,canopies,deck slabs and in shelves and the like etc complete all as specified and as directed by the Engineer-in-Charge.

Form work for rough finished surface to sofits of suspended slabs such as roof slabs, floor slabs, landing and similae work n.exc 200mm thick (horizontal or sloping) complete all as specified and as directed by the Engineer-in-Charge.

TMT steel bars 8mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with and including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed by the Engineer-in-Charge.

S&F 18/19 mm thick prelaminated particle board interior grade both side laminated with decorative choice laminations fixed with screws to timber frame work as in shelves/kitchen cupboard shutters/almirah shutters including fitting of brass handle, stainless steel hinges, fancy type locking arrangment complete all as spdecified and directed.

E/M Works: Taking down carefully copper/aluminium point wiring (light, fan, light & power socket) complete with fittings and fixtures such as switches,ceiling rose ,pendents, regulators, socket, lamp holders brackets,bulk head fitting, etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and also making good distrubed surfaces of wall,floors etc, complete all as specified and directed by the Engineer-in-Charge.

Point wiring with 1.5 sqmm copper conductor (Multistranded) PVC insulated and unsheatheted FRLS electric cable 1100 volts grade and including PVC casing caping/conduit pipe of suitable size with all fittings accessories and including PVC insulated electric cable 1100 volts, 1.5 sqmm (multi stranded) copper conductor single core (Green colour) cable as continious earth wire connected to common earth dolly including sunk sheet terminal box made out of 1.6 mm thick MS sheet concealed on wall or on surface as per site requirement and making good distrubed surface of wall ,covered with 3 mm thick plastic laminated for mounting of switches, socket, fan regulators etc., complete all as specified and directed by the Engineer-in-Charge for the following:-

One light /fan/bell point controlled by one No, one way 5 Amps switch. complete all as specified and as directed by the Engineer-in-Charge.

One 3/5 pin socket outlet, 5 Amp, independent, controlled by one No. one way switch on independent board, complete all as specified and as directed by the Engineer-in-Charge.

One 3/5 pin socket outlet, 5 Amp controlled by one No, one way switch on same board, complete all as specified and as directed by Engineer-in-Charge.

All as per serial item No 92 here-in-before ,but for one socket out let 15 Amp on the independent board with 2.5 sqmm copper conductor multistranded PVC insulated and unsheathed electric cable 1100 volts (ISI MARKED) including PVC insulated and unsheathed electric cable 1100 volts, 2.5 sqmm copper stranded conductor as continious earth wire connected to common earth dolly, complete all as specified and as directed by the Engineer-in-Charge.

Sheet metal enclosure factory made (double door) shutter type for MCB DB SPN, 240 Volts,8 ways with 200 Amps rated bus bar, neutral link, earth bar, complete all as specified and as directed by the Engineer-in-Charge.

MCB SPN, 40-63 Amps, 240 volts, 10 kA rupturing capacity, 'C' curve type, including taking down old existing, complete all as specified and as directed by the Engineer-in-Charge.

MCB SP, 5 -32 Amps, 240 volts, 10 kA rupturing capacity, 'C' curve type, including taking down old existing, complete all as specified and as directed by the Engineer-in-Charge.

Modular switch one way, 6 Amps, 230 volts AC, 50 Hz, complete all as specified and as directed by the Engineer-in-Charge.

Modular socket outlet , flush type, 2 in 1, 3 pin, 6 Amps, 230 volts AC, 50 Hz, complete all as specified and as directed by the Engineer-in-Charge.

Modular socket outlet, flush type one way, 2 in 1, 3 pin, 16 Amps, 230 volts AC, 50 Hz, complete all as specified and as directed by the Engineer-in-Charge.

Modular socket outlet, flush type, 2 in 1, 3 pin, 16 Amps, 230 volts AC, 50 Hz, complete all as specified and as directed by the Engineer-in-Charge.

Ceiling rose surface type, 65 mm x 50 mm three terminals/PVC/polycarbonate, isolated body fixed on PVC block,complete all as specified and as directed by the Engineer-in-Charge.

Electronic fan regulator modular type flush mounting step type 300-400 Watts, complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing LED lights fitting 1x 22W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and as directed by the Engineer-in-Charge. Make: Havells or equivalent in Bajaj/Crompton Greaves /Phillips

S&F in replacement for angular type lamp holder PVC policarbonate type with black plate including lamp 7 watt complete all as spd and directed.

S&F exhaust fan, steel body AC single phase, 230 volt of size 380mm sweep with, blades, and frame , louvers etc complete all as spd and directed.

S&F ceiling fans, complete with three blade, down rod, accessories 230 Volts , 1200mm sweep, with squirrel cage induction motor complete all as spd and directed.

S&F LED 8 watt bollard light new generation, energy saving, environment friendly , long life aesthetically designed aluminium landscape IP 65 luminarie for diffused lighting with high power LED as light source including with conduit pipe and wire for connection and connected item. Make: Havells Cat part No BAMBOOBL8WWLED830PSYMTOPC or equivalent in Bajaj/Crompton Greaves /Phillips

Earthing complete with and including galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick surrounded by a mixture of charcoal and salt in alternate layers burried directly in ground vertically in a pit of depth not less than 2.25 m deep below ground level with top edge of earth plate at a depth of not less than 1.5 m below ground level, connected with and including galvanised iron or steel earth wire,4mm dia (No. 8 SWG) by means bolts, nuts, check nuts and washers made out of galvanised iron, 15 mm bore (light grade) GI pipe for protection of earthing lead, 20 mm bore (light grade) GI pipe for watering with funnel, wire mesh and including necessary excavation and earth work, PCC 1:2:4 type B-1 pit and 50 mm thick RCC M-25(Design mix) reinforced with XPM (weight not less than 3 kg/sq m) pit cover, C.I frame, charcoal and comman salt filling in alternate layers, complete all as shown and specified in electrical plate No. 3 of SSR Part-I (2009), complete all as specified and directed by the Engineer-in-Charge. Note:- Earthing to be done for replacement of existing earthing. The materials retrieved from earthing shall be credited to contractor.

Replacement of existing MCCB with new MCCB 4 pole 415 volt 100Amp rating capacity in 36 KA with enclosure a frame adjustable thermal and fixed magnetic setting ics=100% complete all as specified and directed by the Engineer-in-Charge. Make:- Havells/L&T/Legrand/ABB /Schneider

Replacement of existing Sheet metal enclosure DB with new Sheet metal enclosure factory made (double door) shutter type for MCB DB TPN horizental type, 440 Volts, 6ways with 200 Amps rated bus bar, neutral link, earth bar, complete all as specified and as directed by the Engineer-in-Charge.

Submain wiring with PVC insulated unsheathed copper conductor cable, multi stranded, single core, FRLS type, 1100 volts grade 2 x 10 sqmm complete drawn in and including casing caping/PVC conduit ISI marked of suitable size and its accessories along with 1x 6 sqmm PVC insulated unsheathed copper conductor cable, multi stranded for continuous earth wire including making good the disturbed surface, complete all as specified and directed by the Engineer- in-Charge. Note :- 2 +1 run of 6Sqmm cable including casing caping/PVC conduit of suitable size shall be measured as one running metre.

Note :- An amount of Rs. Rs 10,016.00 on account of credit schdule for Sch 'A' Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum.

M/S N A Enterprises (BID ID -3136399)

M/S B A Traders (BID ID -3136462)

rafiq trading co (BID ID -3136688)

M/S A Q ENTERPRISES (BID ID -3136565)

M/s FAYAZ AHMAD BHAT C/O ZAHOOR AHMAD DAR (BID ID -3136636)

M/S M.S TANVEER ENTERPRISES (BID ID -3136646)

FM Trading Corporation (BID ID -3136262)