69 H(F)(W)/2024-25

Amount

Part - A ( Material) Following Material Supplied by the Contractor:-

LT Clamp

LT Shakle Insulator

Holding Clamp & Dropper

Nut Bolt

X Arm Holding Clamp

F Clamp

The work of safe carriage of the following material with loading/unloading from store centre Darshan Nagar to site of work. (Approx. Distance 0 to 20 Km.)

Safe cartage of 8.5 Mtr. Long PCC poles.

Safe cartage of 9 Mtr. Long PCC poles.

ACSR Weasel Conductor

AB Cable (3x50) sqmm

AB Cable (3x120) sqmm

D Box Three Phase

Transformer 25 KVA

Transformer 63 KVA

Other Line material i.e. cross arm / conductor / pin insulator / stay / earthing/cable Box etc. except A.B Cable.

Dragging of PCC/ST Pole as per RESPO Norms.

Fabrication and Erection of Single Pole Support on PCC/ST Pole including grouting with 1:4:8 ratio Cement, sand & Brick Ballast& including digging of pit and fixing of all accessories clamp & earthing as per RESPo Norms. (Cost of clamps borne by contractor)

Fabrication and Erection of Double Pole Support on PCC/ST Pole including grouting with 1:4:8 ratio Cement, sand & Brick Ballast& including digging of pit and fixing of all accessories clamp & earthing as per RESPo Norms. (Cost of clamps borne by contractor)

Grouting and Binding of Stay in 1:4:8 ratio with cement, sand and brick ballast including cost of all grouting materials as per RESSPO Norms

Earthing of Poles as per RESPO Norms

Stringing, Sagging, binding and jumpering of ACSR Weasel as per RESSPO Norms

Stringing, Sagging, binding and jumpering of AB Cable Size (3x50+1x35+1x16) as per RESSPO Norms

Stringing, Sagging, binding and jumpering of AB Cable Size (3x120+1x95+1x16) as per RESSPO Norms

Mounting of 25 KVA Transformer as per RESSPO Norms.

Mounting of 63 KVA Transformer as per RESSPO Norms.

Earthing by way of boring and lowering of "B" class G.I. pipe 50 mm dia 20 mtr. Long from ground upto the water lavel it will be connected to the G.S. Strip for T/F nutral connection the earth strip will be welded to the G.I. pipe the work also included top cap and clamps for pouring water the cost of all material will all labour and T n P etc. complete in all respect . (all the material will be supplied by the contractor.)

Construction of Transformer Plinth size 2x2x1.5 including excavation of foundation, base concreting of 1:6:12 (Cement mortar of Ratio 1:4 foundation, CC in 1:4:8 ratio (Cement fine sand and brick ballast ) and RCC work with ratio 1:2:4 Cement, Coarse sand and Stone Grit of 20 mm gause as per RESSPO norms

Erection & Commissioning of of Single/Three Phase Distribution Box with help of clamps (Cost of clamp & Bolt & Nuts shall be borne by contactor ) as per Norms.

Rect Back 10 Kva T/F

Rect Back 16 Kva T/F

Rect. Back old and used AB Cable Single Phase

Hindustan Electric Work

M/S BALAJI ENTERPRISES