REPAIRS TO DAMAGED RCC STRUCTURAL MEMBER EXTERNAL AND INTERNAL PLASTER WORK SHAFT AREA RAIN WATER PIPE LINE AND OTHER MISC WORK AT OLD RS COLABA AND REPAIR MAINTENANCE OF CERTAIN BR WORK LIKE PLASTERING TILING JOINERY SANITARY FITTINGS AND OTHER MIS

Amount

Demolition of RCC chajjas/drops/fins thickness exc 10 cm but not exc 15 cm, (width of chhajjas varrying from 45cm to 75cm) cutting straight, mechanically/ by means of RCC cutter machine, trimming the chajjas projections upto 15 cm from external surface of walls including errection of double steel scaffolding, covering with green cloth and all the safety measures/precautions and complete all as specified and as directed by Engineer-in -Charge.

Chipping ,removing carefully old broken concrete work by low impact hammer ,breaker without damaging the structure & cleaning and disposal of debris out side the premises etc. complete as directed by Engr-in-Charge. Hard concrete should not be removed by force.

M&L for applying the rust remover alkaline in natrue having specific gravity of 1.1 kg/ltr to the existing/additional rebars including wire brushing manually or by mechanical tools, after cleaning the disturbed surface etc. complete by draining water. Rust remover shall be procured from one of manufacturer given below. (Make : Fosroc/Sika/BASF/Krisha conchem/Dr Fixit Pidilite) Note :- Measurement on the basis of area of concrete exposed.

M&L for applying two coats of anti-rust protective coating in the form of Acrylic Polymer with a minimum solid content to 40% solids mixed with cement in 1:1.5 proportion (1 part polymer and 1.5 parts cement) on rebars after cleaning of rust scales as per manufacturer's instruction. Anti-rust protective shall be procured from one of manufacturer given below. (Make : Fosroc/Sika/BASF/Krisha conchem/Dr Fixit Pidilite) Note :- Measurement on the basis of area of concrete exposed.

M & L for TMT bars 10mm dia. and over, Cut to length, bent to shape required including cranking, spirally and binding with MS wire (annealed) not less than 0.9mm dia.by placing in position new reinforcement bars including tack welding to existing reinforcement bars all complete as specified and as directed.

Providing bonding coat of SBR polymer over the exposed steel/welded mesh/concrete in ratio 1:1 to 1:1.5 of polymer and cement complete as directed by the consultant. SBR polymer to be procured from one of the manufacturer's given below. (Make : Fosroc/Sika/BASF/Krisha conchem/Dr Fixit Pidilite)

M&L for repairing the damaged concrete portion by SBR Polymer with a minimum solid content to 40% cement mortar in proportion 1:5:15 i.e. (1 part SBR polymer : 5 parts OPC cement and and 15 parts of graded quartz aggregate (sand) upto 25mm thickness as directed by the manufacturer's instruction including necessary curing etc. complete all as specified & as directed.SBR polymer shall be procured from one of manufacturer given below. (Make : Fosroc/Sika/BASF/Krisha conchem/Dr Fixit Pidilite).

M&L for casting and repairing of excessively damaged members with micro concrete at all levels with all leads and lift as directed including mixing, laying, levelling, finishing including curing complete. Grade of Micro-concrete to be M-40 at 28 days and same shall be procured from one of manufacturer given below. (Make : Fosroc/Sika/BASF/ Krisha conchem/Dr Fixit Pidilite).

M&L for providing form work of single lenght to pour the conctete/micro-concrete using waterproofing film coated ply wood complete all as specified and as directed.

M & L for providing and fixing of factory made fibre glass reinforced plastic (FRP) “Chajjas” – 4mm thick of “fibreways” brand in required colour, size and design made by Resin Transfer Moulding (RTM) machine technology available with laminated single piece, having smooth gradual slope curvature for easy drainage of water and duly reinforced by 02 Nos vertically and 01 No horizontally 50x 2mm thick MS flat with 12mm in built hole for gouting on the existing wall along with the 50mm flanges duly inserted and sealed in the wall complete in one single piece casted monolithically including all necessary fittings. Moulded with unsaturated polyester resign as per IS 6746 duly reinforced with fibre glass chopped strand matt (CSM) as per IS 11551. Available with protective gel coat U/V coating on top for complete resistance from the extreme of temperature, weather and sunlight all complete as directed by the Eingineer-in-Charge.

Taking down cement plaster of any description in any position including racking out joints making key scrubbing down with water etc all complete.

M&L for 20 mm thick plastering in two coats 15 mm thick backing coat in CM 1:6 and 5 mm thick setting coat in CM 1:4 mixed with water proofing compound @ 2% by weight of cement on fair faces of brick work or concrete wall surfaces finished even and smooth without using extra cement all as specified including scaffolding, Safety net etc all complete as directed by Engr-in-Charge. (Note :- WPC to be mixed in setting coat only and shall be measured and paid separately)

Supply only integral water proofing compound of approved make as per ISI.

M&L for Rendering 15mm thick in cement mortar 1:6 on other than of concrete surface complete all as specified and directed.

M&L for preparing newly plastered surfaces and applying two coats of oil emulsion distemper on wall over a coat of alkali resistant primer all over the surface on new plasterd surfaces of wall all as specified.

M & L for preparing newly plastered or unplastered surfaces and applying two coats of acrylic based exterior grade (100% Acrylic) over a coat of primer & bio wash on walls incl necessary scaffolding complete.

M&L preparation of old decorated surfaces of wall including washing and applying two coat of Acrylic emulsion paint exterior grade (100% Acrylic) over one coat of primer incl necessary scaffolding, Safety net etc all complete as directed by Engr-in-Charge.

M&L for Preparation of new surfaces of steel or steel based materials of any description not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of antirush paint/red oxide primer, complete all as specified and as directed by EIC.

Taking down chowkats with shutter (without taking shutter from the frame) not exc 1.5 sqm each all complete.

S&F for machine cut kota stone slab single piece length as in jambs/cills of windows 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing (Note : kota stone single pice of Cill will be fixed in two steps) all complete as directed by Engr-in-Charge.

M&L for Screed bed or bedding layer of mortar 20 mm thick in CM 1:4 for laying floor finishes all complete as directed by Engr-in-Charge.

Rounding to edges of stone slabs one edge,such as in steps, windows frame, cooking plateform,and other similar situations.

S & F anodised aluminium frame/track or shutters for windows, ventilators etc. with one or more rebates including joining cleat for fixing etc.fixed or sliding type/louvered window or ventilator without sash bar, aluminium including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws locking arrangements etc complete all as specified and directed by Engr-in-Charge. Note: Minimum 25 micron anodisation for all aluminium sections)

M&L anodised aluminium grill with suitable aluminium anodised frame section of ‘F’ section of size 23.4 x 15.3 x 1.4 mm thick manufactured by M/S Deco grill pattern DG-102 (80mmx60mm aperature) complete all as specified and directed by Engr-in-Charge.

Taking down shutters of any description n exc 1 sqm each.

S&F Second class hard wood factory made glazed and skeleton shutters 30-35 mm thick, open rebatede and prepared to receive glass, gauze etc (without sash bars), edge of framing plain chamfered of rounded, fitted with cut and mitred beads for securing glass etc. size of members of shutters shall be as specified in SSR Part I, section 8.20 (a).

S & F 75 mm size stainless steel butt hinges (ISI Marked).

S & F extruded aluminium alloy handles 125 mm size, fabricated type, anodised.

S&F Aluminium, anodised, barrel tower bolts 125 mm size of extruded section and fixed.

S&F in repairs 125mm aluminium anodised plate type II gate and shutter, hooks and eyes.

S&F 3mm thick plain sheet glass ordinary quality and glazing with aluminium and neoprene beads in square not exc 0.5 sqm in each pane.

S & F Aluminium wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm, cut to required size and fixed to doors,windows shutter, with wooden beading (any size) with aluminium wire staples and removing old beading, complete all as specified and directed.

M&L for two coats synthetic enamel paint over a coat pink primer on new wooden surface of any description over 10 cm width or girth not otherwise described including prepration of surface complete all as specified and directed

Dismantling of stone slabs, bedded and pointed in any mortar of any description or thickness in floors, approns etc. including removal of debries out of defence land complete all as specified and directed

M&L granite (of any type) slab 18 to 20mm thick machine cut,bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete for kitchen plateform over 20mm thick screed bed or beddingin cement mortar 1:4 etc complete all as directed .

M&L Dismantling floor, hearth, or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises. all as specified.

M&L non-skid coloured Ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not excceding 0.18 sqm, in floors etc, set and jointed in epoxy mortar and pointed in white of coloured cement to match including 15 mm thick screed bed in CM 1:6 also roughening surface of old concrete floor and brushing neat cement slurry with 3.0kg of cement per sqm all as specified.

M&L for rendering 10mm thick in cement mortar 1:4 on backing coat of wall tiles etc complete all as specified and directed.

M & L Coloured glazed ceramic tiles 300 x 200 x 7mm on vertical surfaces set & jointed in neat cement slurry and pointed in white cement mixed with pigment all as specified and as directed.

Taking down CI soil/waste/vent/rain water pipes including all fittings like shoes bends swan necks etc of any dia all as specified and directed.

S & F CI soil/waste/vent pipe in any length with ears 100mm bore (sand cast) in any length with cement joints fixed to walls complete all as specified directed.

All as per item 41 above but except pipe.

S & F CI soil/waste/vent pipe in any length with ears 75mm bore (sand cast) in any length with cement joints fixed to walls complete all as specified directed.

All as per item 43 above but except pipe.

S & F CI bends (any radius) for soil/waste pipes 100mm bore diminishing pieces or tapers on walls complete all as specified.

S & F CI bends (any radius) for soil/waste pipes 75mm bore diminishing pieces or tapers on walls complete all as specified.

S & F CI branch piececs single (equal or unequal) ordinary or inverted (spigot or socked type) with parallel branches for 100mm bore pipe (Y or T) all as specified and directed.

S & F CI branch piececs single (equal or unequal) ordinary or inverted (spigot or socked type) with parallel branches for 75mm bore pipe (Y or T) all as specified and directed.

S & F 100mm cast iron sanitary connection socket to fit WC out-let.

S&F in repairs for vitreous china squatting pan Orissa pattern of size 580 x 440 mm white with back inlet and integral footrest and anti syphonnage pipe including 'P' or 'S' trap and provn of lime concrete complete all as specified supplied and fixed in repairs.

S&F in repair PVC valveless, syphonic action type, flushing cristern, 10 ltr capacity low level, white, with inlet, ball valve, float and handle including brackets and Flush pipe of polyethylene of low or high density for low level cistern.

M&L for CI Nahani trap dia of outlet 75mm with CP grating including jointing to waste pipe fixed in cement concrete type B 1 (1:2:4).

Taking down PVC rain water pipes including all fittings like shoes bends swan necks etc of any dia all as specified and directed.

S & F PVC (SWR) pipes 160mm bore single socketed in any length with rubber ring joints fixed to walls.

S & F PVC (SWR) bends 160mm bore any radius

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for including chaina mozaic, WC etc.

Repair/Treatment of sunken floor slab compraises of the following specifications and all as specified :-

(i) M&L for cleaning the sunken/lowered portion of RCC slab surface (including vertical total depth plus skirting height) of floors by wire brush, chisel out any mortar sticking to the surface and brooming completely. 40 mm thick avg PCC 1:2:4 type B-0 using 12.5mm graded aggregate mixed with integral water proofing compound @ 3% by wt of cement consumed as in padding conc to achieve proper slope including 50mm dia 350mm long medium grade GI spout pipe and cutting holes in bricks or RCC wall for spout pipe & making good surface after inserting and setting spouts all as specified.

(ii) Rendering of uneven surfaces with 6mm thick CM 1:4 mixed with integral water proofing compound @ 3% by wt of cement consumed. Fill it with water and check dampness and seepage. Where dampness/seepage is noticed, nozzles shall be fixed and grouting carried out.

(iii) All junctions points of side wall where CI/GI pipes are passing through shall be sealed with epoxy puty.

(iv) After drying putty, wash the slab and sides of sunken portion with water and make it clear and clean.

(v) M&L for applying two coats of polymer modified cementious water proof coating as per manufacturs instruction to bottom and vertical sides up to finished floor level+100mm height. The thickness of two layer shall be 1mm. When the second layer is still sticky, coarse sand spray shall be carried for the vertical and bottom surface of the sunken portion all as specified and directed.

(vi) Plaster the bottom and sides up to bottom of the skirting with minimum 20mm thick CM 1:4 mixed with integral water proofing compound 3% by wt of cement consumed as per manufacturer's specification including rounding of corners and junctions sloping towards spout.

(vii) All pipes laid in sunken portion shall be covered with 50mm thick PCC 1:3:6 all round after painting with anticorrosive paint (Black Japan shall be paid separetely).

M&L for filling with PCC 1:5:10 type E2 (1 Cement : 5 coarse sand : 10 graded aggregate 40 mm nominal size) as specified.

Removing demolished material exc 5 Km but n.exc 15 Km and depositing where directed

Dismantling of MS grill of any description and position etc.

M&L for fabrication of framed work as MS grills. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars barred iron doors, ladders framed balusters, walk ways, railings, framework of water tanks and similar work conform to Fe 290 Gde-E-165 & fixed in position as directed etc complete.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed by Enginner-in-Charge.

M&L for Brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and directed by Enginner-in-Charge.

M&L non-skid coloured Ceramic tiles 300x300x6 to 7mm thick (square/rectangular) area of each tile exceeding 0.06sqm but not excceding 0.11 sqm, in floors etc, set and jointed in cement mortar and pointed in white of coloured cement to match including 20 mm thick screed bed in CM 1:6 all as specified.

S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 2omm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of fplain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles. & rails with suitable PVC sheet beading, and joined together with sovent cement, suppling & fixing in the frame at site complete all as specified and directed by Enginner-in-Charge.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening complete all as specified and directed by Enginner-in-Charge.

S & F extruded aluminium alloy handles 150mm size, fabricated type, anodised complete all as specified and directed by Enginner-in-Charge.

S&F Aluminium, anodised, barrel tower bolts 150mm size of extruded section and fixed complete all as specified and directed by Enginner-in-Charge.

S & F in repair Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand.

S&F in repair sink with drainage board made of stainless steel 1mm thick kitchen or laboratry with plugs, washers and wastes; including beading in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmX460mmXbowl size 410mm X 330mmX160mm complete as directed.

S & F 32 mm dia Waste coupling brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed including waste pipe.

S & F pillar tap 15mm bore, cast copper alloy fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

S&F PVC connection 15mm size with PTMT nuts of length 450mm

S&F Unplasticised PVC pipes of pressure rating 10 kgf/cm2 of 50 mm bore fixed complete to walls, ceiling or in floors including bend and sockets etc; any type of pipe complete all specified and directed.

S&F CP grating over Nahani trap and floor trap of 100mm Dia .

Taking up or down GI tubing and connections 15 mm bore including cleaning for refixing or removal to store complete all as specified.

Refixing old GI tubing and connection15 mm bore in new or old position in ( Walls, ceiling, floors etc) with old accesories complete all as specified.

S&F GI Tubing 15 mm bore medium grade with all fitting and fixed comlete to wall and ceiling or laid in floors complete all as specified.

S & F Bib tap 15mm bore, cast copper alloy fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S & F Stop valves 15mm bore, cast copper alloy fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

M&L for 05 mm thick plastering in CM 1:3 on concrete surface on ceiling finished even and smooth all specified & as directed.

M&L for preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified.

All as per item 16 above but on ceiling.

S & F in repairs Aluminium wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm, cut to required size and fixed to doors,windows shutter, with wooden beading (any size) with aluminium wire staples and removing old beading, complete all as specified and directed.

S&F in repair Brass chromium plated Tubular towel rail 20mm dia, D type, 60cm long

S&F 125 mm dia CP Brass chromium plated shower Rose with shower arms with or without swivel joints , any size .

S & F Sheet glass shelf assmbly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long

M&L for preparation of old surfaces of wall and applying one coat of white wash on old plastered wall surfaces including all as specified.

All as per item No 42 above but on ceiling.

M&L applying one coat of oil bound distemper on old decorated surfaces and filling the surface inperfections such as holes, dirt, fine cracks including preparation of surface complete all as specified.

Complete removal of existing treatment, preparing surfaces, plastered or unplastered old surfaces priming plastered and other surfaces with alkali-resistant priming paint and applying two coats of distemper oil bound, white or tinted on walls incl a coat of white cement putty all as specified.

M&L for applying one coat of synthetic enamel paint including preparation of old wooden surfaces over 10cm width/girth all as specified and directed.

M&L preparation of old painted surfaces over 10cm width or girth and applying one coat of synthetic enamel paint on steel surfaces all as specified and directed.

Supply and fixing in repair 20-25 mm dia stainless steel Curtain Rod fancy type as approved finish including Bracktes for supports & fancy type knobs at both end compete all as specified and directed by Engr-in -Charge

S&F LDPE PVC pipes of pressure rating 6 kgf/Sq.cm of 32/40 mm bore fixed complete to walls, ceiling or in floors including bend and sockets etc; any type of pipe complete all specified and directed.

Repair to wooden joinery works such as resecuring or easing and adjusting of door , window, kitichen cabinet, cupboard of any size , refixing hings, tower bolt, handle by providing nails/screw etc complete as directed by engr-in-charge. Note :- work shall be carried out upto G+14 storey building. Rate including scaffolding and safety net cloth at places.

Note:- Work shall be carried out upto G+14 story bldgs. Rate incl scaffolding & all necessary safety.

Unity Enterprises

SHREE JAGDISH FURNITURE CO.