SPECIAL REPAIR TO CERTAIN BUILDING OF REGT WKSP UNDER GE (I) GOS

Amount

Demolation of brick work built in cement mortar including all quions, arches, pillars etc all as specified and directed

M & L for brick work with sub class "B" brick (old size) straight or curved on plan to any radius in half brick thick walls built in CM 1:4 to any radius complete all as specified and directed.

M & L for brick work with fly ash bricks straight or curved on plan exc 6m mean radius in CM 1:4 including demolation of brick work or stone/ boulder masonry, built in cement mortar completed all as specified and directed.

S & F in repair 15 mm bore 3 layer PP-R pipes SDR 7.4 & SDR 11 UV stablised and anti microbial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded PP-R fittings complete to walls, ceilings or in floors tubing and connections complete all as specified and directed.

S & F in repair 20 mm bore 3 layer PP-R pipes SDR 7.4 & SDR 11 UV stablised and anti microbial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded PP-R fittings complete to walls, ceilings or in floors complete all as specified and directed.

M & L for cutting and chaseing in brick wall for concealed GI tubing and making good in CM 1:4 n.exc 10 cm in girth complete all as specified and directed

Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for shelves, lintels etc complete all as specified and directed.

M & L for Reinforced cement concrete 1:2:4 Type B-1 (20 mm graded aggregate) Slabs supported on walls,beams and columns in floors,roofs, landings, balconies , canopies,deck slabs and inshelves including necessary formwork complete all as specified and directed.

M & L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clipss complete all as specified and directed.

Taking down chowkhat frame with shutter (without taking out shutter from the frame) n exc 1.50 Sqm and removing from sites complete all as specified and directed.

Taking down chawkhat frame with shutter (without taking out shutter from the frame) exc 1.50 Sqm but n. exc 4 sqm each and removing from site complete all as specified and directed.

S&F factory made UPVC white colour Slinding Window three track made of extruded profiles with wall thickness of 2.3mm (±0.2mm), Window profile with hollow section with multi chamber, frame (110mm X 52mm), sliding sash (42mm X 67mm), Sliding mesh sash (20x50mm), sliding interlock (one vertical length in each shutter) (45.5mm X 28mm), glazing bead (24.5mm X 16mm) will be mitered, cut and fusion welded at all corners, including railing of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware, EPDM gasket 1.2 ± 0.2mm thick galvanised steel frame (30mm x 18mm) 2 Nos, sliding sash (30mm X 18mm) 2 Nos, sliding mesh sash (26mm X 10mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Haradware (tough lock of zinc alloyed (white powder coated), steel roller system, stainless steel wire cloth 0.36mm nominal dia of wire and average width of apaerture 1.40mm and required accessories 5.5mm thick glazing with ordinery glass and gauge as requiredat site. Note : (A) Area not exe 2.00 sqm each . (B) The unit rate quoted by contractor included cost of glass and all other connected accessories.

S & F Factory made solid PVC door frame of size 50 x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing Make Rajshree /Sintex.

M & L Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS Frame shall be covered with heat moulded plain colour PVC C Channel having a PVC sheet strip of 20mm width stuck inside with solven cement for stiles and plain colour PVC sheets for top rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted ihn th MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solven cement, Supplying & fixing in the frame at site as pser specification & drawing Make Rajshree /Sintex.

S & F Butt hinges, medium weight,cold rolled mild steel, 100 mm size complete all as specified and directed.

S & F Aluminium anodised barrel tower bolts of extruded section, 150mm long complete all as specified and directed.

S & F alumunium handle fabricated type anodised 150mm long complete all as specified and directed.

S & F framed work such as grills, gratings etc with ends of bars shouldered and or riveted or forget into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, frame work of water tank and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

M & L for preparation of new steel surface of any description exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S & F in repair kitchen cabinet & CB shutter with frane and shelves made of solid upvc foam profile withhomogenoud fine cellular structure having smooth outer integral skin having 45mm width and 18 mm thickness as vertical & horizontal stiles , joints are made and shall be fixed to walls using required size sheet metel screw and solvent adhesive vertical and horizontal profile made of UPVC profile frame of size 35mm x 17mm. the panel shall be filled with accucel polank profile of size 250mm width and 6mm thick complete all as specified by manufacturer instruction and as directed.

S & F 40 mm dia, cupboard knobs polished, hard wood knobs fixed with screws for kitchen cabinet & below platform complete all as specified and directed.

S & F Continuous (piano) hinges of size of flap 30mm mild steel, bright finish or elecrogalvanised fixed with screw to timber frame work complete all as specified and directed

S & F Magnet Ball catches with 8mm dia steel ball, and brass body and striking plate for cup board / cabinet shutters complete all as specified and directed

Demolition of sunken slab floor of WC and Bath including WC trap etc and providing Water proofing treatment of sunken slab in following sequence complete :- (a) 15 mm thick rendering on vertical sides of RCC slab in cement mortar 1:3 mixed with water proofing chemical PIDIPROFF LW of Dr. Pidilite or equivalent approved as per manufacturer instructions. (b) Cleaning the concrete surface by brushing and watering and remove all surface imperfections . (c) Fixing 40 mm dia PVC Pipe 450 mm long at bottom of the sunken and Wraping of bathseal tape on the pipes inserted through walls to floor area and seal it. (Bath seal tape product of Dr. Pidilite or equivalent approved and grouting around the inserted pipes by porable Dr. Pidilite bathseal or equivalent approved grout as directed. (d) Make angle fillets by mixing cement sand and Dr. Fixit pidicrete URP or equivalent approved on all corners. (e) Brushing neat cement slurry 02 coats with high performance cementiteous polymer water proofing coating of Dr. Fixit bathseal or equivalent approved WPC for thickness of 01 mm in combination of WPC and cement ( 1:1.5) by volume and upto height 15 cm from bottom slab and allow it dry completely. (f) Providing PCC 1:4:8 type D-2 using 40mm graded stone aggregate mixed with WPC of Dr Fixit as per manufacturer instruction in sunken slab over brickbat. (g) Filling the sanitary gaps with Dr. Fixit (Pidilite) or equivalent sealing compound complete. NOTE : Area of sunken floor not exc 6.00 sqm each,

Dismantling of floor hearth or wall tiling including cement mortar bedding and backing coat and removing serviceable tiles to store yard and rubbish off the premises complete all as specified and directed.

M & L for Non skid ceramic floor tiles, shade as approved size (400 x 400mm) x 7-8mm thick over and including 15mm thick screed bed in CM 1:4 and pointed in white or colour cement to match complete all as specified and directed

M & L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

M & L for coloured vitrified tiles of size 600x600x8-10mm thick as in floor set and jointed in neat cement slurry and pointed in coloured cement to match the suraface over and including screed bed or bedding layer 15mm thick in CM 1:4 complete all as specified and directed.

M & L for coloured vitrified tiles of size 600x600x8-10mm thick in vertical surfaces such as dado/skirting with and including 10 mm thick backing coat in CM 1:4 complete all as specified and directed

Dismantling stone slab and tiles of any description and thickness in floors , aprons etc laid bedding and pointed in any mortar complete all as specified directed.

M & L for Machine cut kota stone slab flooring 20-25mm thick over and including screed bed or bedding layer 20 mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed..

M & L for Machine cut kota stone slab 20-25mm thick in treads and riser of steps, skirting, dado and pillar etc over and including 10 mm thick bedding layer or backing coat in CM 1:3 laid and jointed with grey cement slurry and pointed with grey cement mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M & L for 18-20mm thick granite stone slab over and including 20 mm thick screed bed in CM 1:6 including cutting, polishing & rubbing and including rounding of exposed edges, fixed as in platforms/window cills etc including dismantling stone slab and tiles complete all as specified and directed.

Drilling through holes in granite stone for inserting pipes etc not exc. 25 mm dia complete all as specified and directed

S & F in repair Stainless steel fancy type curtain rod 25 mm dia including bracket/wall to wall and latto on each end complete all as specified and directed.

S & F in repair PVC (SWR) Pipes 110 mm bore single socketed in any length with rubber ring joints , fixed on walls including clump and bolts & nuts and securing ends of stays to wall complete all as specified and directed.

S & F in repair PVC (SWR) Pipes 110 mm bore single socketed in any length in trenches or in floors complete all as specified and directed.

S & F in repair PVC (SWR) Pipes 75 mm bore single socketed in any length with rubber ring joints , fixed on walls including clump and bolts & nuts and securing ends of stays to wall complete all as specified and directed.

S & F in repair PVC (SWR) Pipes 75 mm bore single socketed in any length in trenches or in floors complete all as specified and directed.

S & F PVC (SWR) bends any radius 110mm size complete all as specified and directed.

S & F PVC (SWR) bends any radius 75 mm size complete all as specified and directed.

S & F in repair 100 mm dia Nahani trap with grating including jointing to waste pipe fixed in cement concrete complete all as specified and directed.

S & F in repair 75 mm dia Nahani trap with grating including jointing to waste pipe fixed in cement concrete complete all as specified and directed.

S & F in repairs vitreous china wash hand basin white flat back size 550x400mm incl 02 Nos angle iron bracket 40x40x5mm bracket CP waste coupling, complete all as specified and directed.

S & F in repair light coloured vitreous china WHB white oval shape of 500mmx400mm (minimun) on new brackets excluding taps waste china & plug including bracket etc complete all as specified .

S & F in repairs vitreous china wash down water closet (Pedestal pattern) white including fixing bolts with and including plastic water closet seat cover closed pattern with flat bottom and cover and MSCP almn hinges device complete all as directed.

S & F Vitreous china squatting pan Orissa pattern 'long pan' size 580x440mm white with 'P' or 'S' trap, front or back inlet with murga band and any pattern excluding flushing cistern and flush pipe including provision of lime concrete bedding complete all as specified and directed.

S & F in repair of plastic water closet seat cover, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hanging device complete all as specified and directed.

S & F in repair 10 ltrs capacity PVC valveless syphonic action type flushing cistern, low level white with inlet ball valve, float and handle including brackets complete all as specified and directed.

S & F in repair 15mm bore PVC connection 450mm long with PTMT nuts and washer as directed.

S & F in repair for CP bib taps 15mm fancy type Chromium Plated cast copper alloy with crutch or butterfly handle complete all as specified.

S & F in repair Angle valve cast copper alloy with capstan head chromium plated screwed down high pressure with long shanks and fly nuts screwed for 15mm bore pipe complete as specified.

S & F in repair for 15 mm bore CP pillar taps fancy type screwed down high pressure with long shanks and fly nuts screwed for iron pipe Hot or Cold with long screwed and fixed complete all as specified and directed

S & F in repair for Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed

S & F in repairs 15mm bore, fancy type shower rose, chromium plated complete all as specified and directed.

S & F in repairs Two way cock/Two way Angle cock with wall flange matt chrome finish complete all as specified and directed.

S & F in repairs hand shower (Health facut) with 1 Mtr flexible tube with wall hook bracket etc, complete set of superior quality complete all as specified and directed.

S & F in repair Toilet paper holder, C P box type complete all as specified and directed.

S & F in repair Gun-metal, globe or gate valves 20mm with iron wheel head, screwed both ends for iron pipe all as specified

S & F in repairs C P Towel ring fixed with and including Chromimum plated brass screws and wooden/plastic cleats complete all as specified and directed.

S & F in repairs Tubular Towel Rail 20mm dia. 'D' type, 600mm long of CP fixed with and including Chromimum plated brass screws and wooden/plastic cleats.complete all as specified and directed

S & F in repair Soap dish CP any size complete all as specified and directed..

S & F in repair PVC Grating doom 125 mm dia with waste hole complete all as specified and directed.

S & F in repair PVC Grating doom 100 mm dia with waste hole complete all as specified and directed.

S and F in repair Hard/Rigid PVC waste Pipe with socket, 32 mm bore for WHB complete all as specified and directed.

Dismantling water tanks of capacity exc 500 & n exc 1000 ltr complete all as specified and directed.

S & F for rotational moulded double layered polyethylene water storage tank cylindrical, hoisted & fixed in position all as specified capacity 1000 ltrs complete all as specified and directed.

S & F in repair 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball & fixed complete all as specified and directed.

M&L plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregates and mixed with 3% integral water proofing compound as in padding over roof slab, finished surface even and smooth without using extra cement complete all as specified and directed. NOTE: (i) WPC shall deemed to be inclusive in quoted unit rate. (ii) Average thickness shall be exceeding 25 mm thick but not exceeding 50 mm for padding.

M&L 10mm thick screed bed or bedding layer in CM 1:4 using 100% coarse sand over roof slab, finished surface even and smooth without using extra cement and mixed with 3% integral water proofing compound complete all as specified and directed. NOTE: (i) WPC shall deemed to be inclusive in quoted unit rate.

M&L for provn of roof treatment with polymeric water proofing membrane all as given below:- (a) Taking down existing water proofing treatment and cleaning of roof surface by washing and rubbing etc. and removing the retrieved material to a distance not exceeding 500m where directed. (b) Applying a coat of bituminous primer conforming to IS: 3384-1986 @ 0.25 Iit/sqm on prepared surface and allowed to dry. (c) Applying and laying 3mm thick APP membrane having non woven polyester matt at core and covered with high quality polymeric asphaltic protected thermo fusible HMHDPE film on both sides with over laps 10cm and 15cm at longitudinal and transverse direction respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners. The membrane shall be torched into groove on vertical plane and groove sealed with cement mortar 1:3. (d) M&L for applying two coats of aluminium paint on membrane @ 0.10 Kg/Sqm (each coat) complete all as specified and directed.

M&L for provn of roof treatment with polymeric water proofing membrane all as given below:- (a) Taking down existing water proofing treatment and cleaning of roof surface by washing and rubbing etc. and removing the retrieved material to a distance not exceeding 500m where directed. (b) Applying a coat of bituminous primer conforming to IS: 3384-1986 @ 0.25 Iit/sqm on prepared surface and allowed to dry. (c) Applying and laying 3mm thick APP membrane having non woven polyester matt at core and covered with high quality polymeric asphaltic protected thermo fusible HMHDPE film on both sides with over laps 10cm and 15cm at longitudinal and transverse direction respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners. The membrane shall be torched into groove on vertical plane and groove sealed with cement mortar 1:3. (d) M&L for machine pressed chequerred cement concrete tiles of size 250x250x20mm thick, set, jointed and pointed in neat cement slurry over and including 15mm thick screed in CM 1:4 complete all as specified and directed.

M & L for preperation of surface of wall/chajja and applying a coat of tapecrete P-151 acrylic polymer modified cementitious slurry consisting of one part of TAPECRETE P-151 and two parts of cement by weight complete all as specified and directed.

Taking down cement plaster from brick wall including racking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.

M & L for 10 mm thick rendering in CM (1:6 ) on fair faces of brick wall or concrete surfaces finished even and smooth including complete all as specified and directed.

M & L for preparation of new surface of walls and Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats over and including a coat of 1mm thick birla wall care putty / POP complete all as specified and directed

M & L for 10 mm thick rendering in CM (1:4) on fair faces of brick wall or concrete surfaces ceiling finished even and fair complete all as specified and directed.

M & L for preparation of new plastered ceiling surface and applying three coats of white wash complete all as specified and directed.

M & L for 15mm thick rendering in CM (1:4) on brick work including using integral water proofing compound finished even and fair complete all as specified and directed. NOTE- WPC shall be measured & paid separetly under respective item.

Supply only integral water proofing coumpound conforming to IS 2645 complete all as specified and directed.

M & L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces of wall complete all as specified and directed

M & L for water proofing cement based putty @ 1 kg (undiluted) per Sqm of average thickness 1mm over the plastered/ old painted surface of wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust etc by skilled labour as per the following steps:- Step 1 :- Mix the putty powder by adding water as per manufacturer's instruction and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2 :- Apply the first coat of the prepared mixer with the help of fully automatic airless spray machine of putty application finishing the surface even and smooth in level without any undulations. Step 3 :- Allow 6-8 hrs time to dry the putty surface.

M & L for one coat of acrylic water based exterior grade primer @ 0.9 lit (undiluted)/ 10sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine and Allow 6-8 hours to dry the surface for painting of subsequent coats.complete all as specified and directed

M & L for water based premium acrylic smooth exterior emulsion of approved colour witgh silicon additive excellent dirt pickup resistance with low VOC less than 50, Antifungal / Anti Algal properties in two coats @ 1.79 lit (undiluted) / 10 Sqm diluted with water as per manufacturer's instruction applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 lit per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in between subsequent coats of paint complete all as specified and directed.

M & L for preparation of old decorated surface of ceiling applying three coats of white wash on ceiling complete all as specified and directed.

M & L for complete removing existing treatment on wall ( any number of layers ) including filling depressionof scrapped surfaces with putty and Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats over and including a coat of 1mm thick birla wall care putty / POP complete all as specified and directed

M & L for 75 mm thick PCC 1:3:6 type C-2 (using 20 mm graded stone aggregate) as in plinth protection, surface finished even and smooth without using extra cement including demolition of cement concrete in plinth protection ground floor complete all as specified directed

M & L for 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base etc including demolition of cement concrete in sub base ground floor complete all as specified directed

M & L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors including screed bed or bedding layer 20 mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including Dismantling chequered tiles of any description complete all as specified and directed..

M & L for obliterating and painting building plaque with background using black synthetic enamel paint and building number with white synthetic enamel paint, overall area of plaque exc 0.1 sqm but n.exc 0.4 sqm each complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light,fan,bell, socket or power) complete,including fixtures and fittings such as switches, ceiling roses, holders,regulators, sockets, tube light fittings i.e removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made for conditions separately ) and including making good the disturbed surfaces to match with existing surface and colour shade with proper putty for smooth finishing without andulations complete all as specified and directed.( Note:- All credit materials should be deposited in MES yard as available on work site the same materials should be issued to contractor through gate pass as per schedule of credit materials against contract agreement).

Material and labour for point wiring complete with 1.5 sqmm, PVC insulated, FRLSH type, ISI marked,conforming to IS-694/1990(as amended) unsheathed, multistranded, single core, copper conductor cable 1100 volts grade using approved colour coding drawn through and including PVC concealed conduit 20/25 mm dia medium grade (MMS) and incliding all accessories such as bend,tee,elbows,reducers,bell mouth tube ends,short pieces & junction boxes with PVC covers etc in walls / roofs / floors / ceiling etc and including cutting, chasing work at any height with flush mounting GI sunken boxes having top,bottom,side/back side knockout for conduit entry from any direction made out of 1.60mm thick, 60mm deep for housing modular switches,sockets,fan regulators, Indicators,blank plate etc and incl Providing modular white cover plate with inner frame suitable as per switch modules and including PVC insulated multistranded copper conductor 1.5 sqmm FRLSH type unsheathed (Green colour),single core cable as earth wire connecting to common earth dolly for further connection to ceiling rose and earth terminal and including making good the disturbed surfaces to match with existing surface and colour shade with proper putty for smooth finishing with existing wall complete all as specified and directed for One light point controlled by one 10amps switch, one way (Note:- All necessary accessories such as modular box,top cover plate,inner frame, blank plate,GI sunken boxes,screws,washers and all modular electrical fixtures are used same make/brand only)

All as per item no. 95 but for One fan point controlled by one switch 10 amps, and one regulator.

All as per item no. 95 but for One exhaust fan point controlled by one switch 10 amps,one way

All as per item no. 95 but for One 5 pin 6 amps socket point controlled by one 10 amps switch on independent board .

All as per item no. 95 but for One 5 pin 10 amps socket point controlled by one 10 amps switch on same board .

All as per item no. 95 but for One bell/buzzer point controlled by one bell push.

All as per item no. 95 but forOne light point controlled by two 2 way switches.

All as per item no. 95 but for above,but point wiring with 2.5 sqmm and earth conductor of size 2.5 sqmm complete all as specified and directed for One 6 pin 16/20amps socket outlet point controlled by one 16/20 amps switch on independent board.

All as per item no. 102 One 6 pin 16/20 amps socket outlet point controlled by one 16/20 amps switch on same board.

All as per item no. 95 above ,but point wiring with 4.0 sqmm and earth conductor of size 4 sqmm complete all as specified and directed.

Supply & fixing modular type switch 10 Amps, single pole,1way,1 module,240V,AC, with small indicator ISI Marked complete all as specified and directed.

Supply & fixing modular type switch 10 Amps ,2way,single pole,1 module,240V,AC, with small indicator ISI Marked complete all as specified and directed.

Supply & fixing modular type bell push 10 Amps,1 module, single pole, 240 volts,AC, with embosing bell simble & indicator, ISI Marked complete all as specified and directed.

Supply & fixing modular type switch 16/20 Amps, single pole,1way,1 module,240V,with small indicator,AC, ISI Marked complete all as specified and directed.

Supply & fixing modular type socket shuttered type 10 Amps, 2/3 Pin combined 2 module,240V,AC ISI Marked complete all as specified and directed.

Supply & fixing modular type socket 16/20 Amps, 6 Pin combined shuttered socket 2 module,240V,AC ISI Marked complete all as specified and directed

Supply & fixing red color lighting indication lamp switch, single pole,240volts,AC,50 Hz suitable for 1 module ISI Marked complete all as specified and directed.

Supply & fixing modular type step fan speed regulator 120W, 2 module,230volts,AC, 360 degree rotation 0/1 to 5 steps, ISI Marked complete all as specified and directed.

Supply and fix call bell AC, 230 Volts single pole, multi music type best and superior quality, ISI marked, as approved type complete all as specified and directed.

Supply & fix angle lamp holder latest model, insulated PVC out side body and brass inside holder with back plate and superior quality for batten fittings/bulbs complete all as specified and directed.

Supply & fix ceiling rose, 3 terminal ,PVC/polycarbonate body ISI marked,and superior quality complete all as specified and directed

Supply & fix 20 watt LED light fitting pride essential bright linea white lighting, high quality materials and slim intergrated design,extruded aluminium housing enhances safety, PC diffuser, reliable and robust housing structure ,maximize the endurance over the life time, easy to install, efficency 100 lm/w and including providing coloured end caps, pre-wired, and PVC/Wooden round/square block -02 Nos and connected with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed.

Supply and fixing 20 watt LED batten nicolaus glamtube integrated design, easy to install,efficency,125 lm/w,PC diffuser and robust housing, high quality materials,pre-wired including providing PVC round/PVC square blocks-02 Nos and connected with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed.

Supply and fixing 36 watts LED supernova light fitting high wattage complete LED lighting with high lumen output,environmental friendly,energy efficient, integrated design, easy to install,PC diffuser and robust housing, high quality materials,pre-wired including providing PVC round/PVC square blocks-02 Nos and connected with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed.

Supply and fixing LED 20 watt,6500K, Pride plus inverter batten,decorative type light fitting white lighting, with square profile and polycarbonate channel,lithium lon battery with charging time 8 hours to 10 hours and back up time upto 4 hours high quality materials and design,extruded aluminium housing enhances safety,high quality PC diffuser, easy to install, efficency 125 lm/w and including providing pre-wired, and PVC/Wooden round or square blocks -02 Nos and connected with LED fitting to ceiling rose and removing old unserviceable fitting complete all as specified and directed.

Supply and fixing 20 watts LED Austra mirror smart light fitting one feet long,contemporary design of mirror light complete decorative LED lighting with extruded polycarbonate, environmental friendly, energy efficient, easy to install,PC diffuser, high quality materials,pre-wired including providing PVC round/PVC square blocks-02 Nos and connected with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed.

Supply and fixing decorative LED 9 watt decorative, globe type,high quality ploycarbonate materials suitable for 9 watt LED lamp ,B22,220 Volts AC with high efficiency, soft glare free light complete with LED lamp,holder suitable for wall surface and connected with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed.

Supply and fixing 12 watt LED panel type slim, compact,aliminium die cast edge lit panel recess mounted square/round type light fitting with LED opal diffuser (lamp/strip) and separate electronic LED driver and connected with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified .

Supply and fix LED secruity light fitting of capacity 40 Watt LED street light fitting in aluminium PDC housing, toughened glass cover with IP65 protection with 4/5 KV inbuilt surge protector and cable connection from ceiling rose/looping box/switch board/DBs to light fitting and testing and including removing of old unserviceable item complete all as specified and directed.

S & F Energy efficient and energy saving new generation 10 watts LED bulk head light fitting IP-65 luminaire with opel diffuser pre-wired of luminaires including LED light driver and connected with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed.

Supply and fix 20 watts LED post top lantern made in cast aluminium spigot housing with decorative opal polycarbonate diffser,outdoor type and IP65 protection and providing suitable fixing arrangements such as necessary GI pipe of suitable dia at post top/pillar and civil work,welding work, lugs,glands,nuts,bolts and washers and including removing old unserviceable item complete all as specified and directed.

Supply and fix 40 watts LED post top lantern made in cast aluminium spigot housing with decorative opal polycarbonate diffser,outdoor type and IP65 protection and providing suitable fixing arrangements such as necessary GI pipe of suitable dia at post top/pillar and civil work,welding work, lugs,glands,nuts,bolts and washers and including removing old unserviceable item complete all as specified and directed.

Supply and fix GI bracket pipe of size 32 mm dia medium grade of 1.2 mtr long bent to shape suitable degree of bending as per site requirement with hot or cold bending method of process for making the one end of GI pipe bracket suitable for fixing of any type street light fitting and shall be fixed on wall surfaces and including providing suitable fabricate galvanised flat iron clamps of 30X6 mm thick -02 Nos suitable for fixing at any place/height with hole fastners,nuts,bolts & washers including grouting on wall etc and including removing of old unserviceable item complete all as specified and directed.

Supply and fixing profile neo LED flood light 70 watts,230Volts,AC outdoor lighting type made up of pressure die cast aluminium housing with toughened glass and high power LEDs and secondary lenses with IP-66 protection and includung system efficiency >110/125 PLM and including providing 10KV surge protection devices with thermal management and including providing necessary fixing arrangements as per site requirement with MS clamps 32X6mm and including removing of old unserviceable item complete all as specified and directed.

Supply and fixing profile neo LED flood light 100 watts,230Volts,AC outdoor lighting type made up of pressure die cast aluminium housing with toughened glass and high power LEDs and secondary lenses with IP-66 protection and includung system efficiency >110/125 PLM and including providing 10KV surge protection devices with thermal management and including providing necessary fixing arrangements as per site requirement with MS clamps 32X6mm and including removing of old unserviceable item complete all as specified and directed.

Supply and fixing profile neo LED flood light 135 watts,230Volts,AC outdoor lighting type made up of pressure die cast aluminium housing with toughened glass and high power LEDs and secondary lenses with IP-66 protection and includung system efficiency >110/120 PLM and including providing 10KV surge protection devices with thermal management and including providing necessary fixing arrangements as per site requirement with MS clamps 32X6mm and including removing of old unserviceable item complete all as specified and directed.

Supply & fixing and sheet metal enclosure with acrylic door type, double door ,415 volts AC,VTPN DB, 4 way,8+12 modules, flush mounting with 200amps copper busbar, 2 neutral/earth bars links and MCCB incomer, and MCB SPN/SP/TPN as outgoing and complete for IP43&54 DBs protection and including removing old unserviceable DBs and incl making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed.

Supply & fixing and sheet metal enclosure, with acrylic door type, double door, 240 volts AC,SPN,DB, 8 way, flush mounting with 100amps copper busbar,neutral bar,earth bar links and MCB incomer MCB SPN/DP and MCB SP as outgoing for IP 43& IP54 DBs protection nd including removing old unserviceable DBs and making good the disturbed surfaces to match with existing surface and colour shade acomplete all as specified and as directed.

Supply & fix and sheet metal enclosure, with acrylic type double door, 240 volts AC,SPN,DB, 4 way, flush mounting with 100amps copper busbar,neutral bar,earth bar and MCB incomer,MCB SPN/DP, and MCB SP as outgoing for IP 43& IP54 DBs protection nd including removing old unserviceable DBs making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed.

Supply & fix MCB SP 6 to 32 Amps 10 KA,"C" series,AC,240Volts,50Hz , ISI marked and including removing old unsv items complete all as specified and directed.

Supply & fix and MCB SPN 32 to 40 Amps 10 KA,"C" series,AC,240Volts,50Hz, ISI marked and including removing old unsv items complete all as specified and directed.

M & L for sub main wiring complete with 2 run of 10 sqmm single core copper conductor (ISI marked)cable 1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit concealed ISI marked medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 10 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked,FRLSH type as earth continuity conductor connected to common earth dolly and including removing old unsv submain wiring making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed. Note : - Two run of 10 sqmm single core copper conductor cable and one run of 10 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit.

M & L for sub main wiring complete with 2 run of 6 sqmm single core copper conductor (ISI marked)cable 1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit concealed ISI marked medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 4 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked FRLSH type as earth continuity conductor connected to common earth dolly and including removing old unsv sub main wiring and making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed. Note : - Two run of 6 sqmm single core copper conductor cable and one run of 6 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit.

M & L for sub main wiring complete with 2 run of 4 sqmm single core copper conductor (ISI marked)cable 1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit concealed ISI marked medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 4.0 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked,FRLSH type as earth continuity conductor connected to common earth dolly and including removing old unsv submain wiring and making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed. Note : - Two run of 4 sqmm single core copper conductor cable and one run of 4.0 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit.

Supply and fix suitable for flush mounting sheet steel enclosure metal clad plug and socket including MCB SP 20 Amps, 10KA 'C 'series, 230 Volts,50Hz suitable for AC's/Geysers complete all as specified and directed.

Supply and fix MCCB, 100 Amps,4 pole,415 Volts , 16/18KA thermal magnetic type with necessary lugs,thimbles, nuts bolts and washers and including removing old unserviceable item complete all as specified and as directed.

Taking down old unserviceable ceiling fans of any type/sweep from work site and deposit to MES store yard for safe custody and Supply and fixing 230 V, 1200mm sweep brushless direct current smart and decorative type ceiling fan complete with three blades, down rods, smart electronic regulator, smart remote control operating unit,LED down lights,metalic finish, dust resistant and connected accessories, . Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current copper winding motor, colour as per requirement at site incl writing MES No on ceiling fan with synthetic enamel paint complete all as specified and directed.

Taking down old unserviceable exhaust fans of any type/sweep from work site and deposit to MES store yard Supply and fix new exhaust fan, steel body AC single phase.230Volts of size 300 mm sweep with blades and including providing insect protection net frame , with louvers and frame incl writing MES No on exhaust fan with synthetic enamel paint complete all as specified and directedcomplete all as specified and directed.

Taking down old unserviceable exhaust fans of any type/sweep from work site and deposit to MES store yard Supply and fix new exhaust fan, steel body AC single phase.230Volts of size 380 mm sweep with blades and including providing insect protection net frame , with louvers and frame incl writing MES No on exhaust fan with synthetic enamel paint complete all as specified and directedcomplete all as specified and directed.

Taking down old unserviceable exhaust fans of any type/sweep from work site and deposit to MES store yard Supply and fix new exhaust fan, steel body AC single phase.230Volts of size 450 mm sweep with blades and including providing insect protection net frame , with louvers and frame incl writing MES No on exhaust fan with synthetic enamel paint complete all as specified and directedcomplete all as specified and directed.

Taking down old unserviceable exhaust fans of any type/sweep from work site and deposit to MES store yard for safe custody and Supply anf fixing exhaust fan made of sturd engineering plastic PVC body complete with louvers shutters, voltage 230v,50hz,rpm 1200 copper winding of sweep 300 mm and including providing insect protection PVC net frame , with louvers with frame incl writing MES No on exhaust fan with synthetic enamel paint complete all as specified and directedcomplete all as specified and directed.

Taking down old unserviceable exhaust fans of any type/sweep from work site and deposit to MES store yard for safe custody and Supply anf fixing exhaust fan made of sturd engineering plastic PVC body complete with louvers shutters, voltage 230v,50hz,rpm 1200 copper winding of sweep 250 mm and including providing insect protection PVC net frame , with louvers with frame incl writing MES No on exhaust fan with synthetic enamel paint complete all as specified and directedcomplete all as specified and directed.

Taking down old unserviceable heavy duty air circulator fans of any type/sweep from work site and deposit to MES store yard for safe custody and Supply and fix new Air circulators of size 500mm sweep wall mounted type, 230Volts, single phase, oscillating type, Hi-speed,low noise with blades and outer cover and including providing hanging hook and connected items incl writing MES No on wall fan with synthetic enamel paint complete all as specified and directedcomplete all as specified and directed.

Cutting the existing surface wall of brick/stone masonary and making round hole/square type at any height suitable for fixing 200 to 450 mm sweep exhaust fan including providing nut,bolt and washers after grouting in PCC and including 3 mm dia 5 cm apreature size GI jali and proper aluminium frame to avoid insect protection fix at inner surface of wall and making good the disturbed surface area complete all as specified and directed.

Taking down old unserviceable geyses of any capacity from work site at any height and deposit to MES store yard for safe custody and Supply and fix new electric water heater, storage type steel body/plastic body with copper inner tank and heating element upto 2 KW capacity 25 litres, BEE 5 star rated complete with all accessories such as safety valve,thermostat, NRV, Hot water and Cold water heavy duty connection pipes-02 Nos,holefasterns-04 Nos and necessary accessories as per site requirement etc.complete all as specified and directed.

Material and labour for Earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directely in ground vertically ( earth pit not less than 2.25 meters deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised iron wire 4 mm dia and light grade protection pipe of 15 mm dia from earth electrode up to test point or up to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate No 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade,GI funnel with wire mesh,including charcoal, salt packed all around the earth electrode plate in layers, PCC earth pit chamber 1:3:6 type C1, of size 45X 45X 45 CM,RCC/(PVC hevy duty cover) cover 1:2:4 type B1 of size 45X45X6 CM, excavation/earth work in any strata and returning filling, removal of surplus soil and testing/test point for required value including removing old item complete all as specified and directed.

S&F for PVC non-metalic rigid conduit incl boxes,junctions boxes 1 to 4 way & terminals but incl of all tees,bends,elbows,reducers,bell mouth tube ends and fixing accessories such as couplers lock nuts,saddles,pipes hookes etc ISI marked heavy duty of size 20/25 mm dia for LAN,telephone and TV connections including cutting,chasses and making good disturbed surfaces to match with existing surfaces with plaster/putty and including removing of old unserviceable item complete all as specified and directed.

Supply and fix PVC casing and caping of size not less than 25X25 mm width with all accessories such as tees,corners,overlaping connector etc for encasing existing telephone cables, LAN cables,TV Cable wires etc along the wall/ceiling/roof etc complete all as specified and as directed.

Supply and fixing TV sockets one module with top cover plate and inner frame including all necessary accessories and including removing of old unserviceable item complete all as specified and directed.

Supply and fixing Telephone socket(RJ11) one module with top cover plate and inner frame including all necessary accessories and including removing of old unserviceable item complete all as specified and directed.

Supplying and laying of CPVC /UPVC pipes SDR 11 & Plain SDR 11 incl all fittings of outer dia 16 mm on walls/ceiling or laying in floors complete all as specified and directed

Supply and fixing stop valve standard of PTMTany colour high pressure screwed ,for iron pipe or CPVC/UPVC and fixed minium weight 15 mm-90gms complete all as specified and directed

Supply and fixing bib tap standard of PTMTany colour high pressure screwed ,for iron pipe or CPVC/UPVC and fixed minium weight 15 mm-90gms complete all as specified and directed

Supply and fixing stop valves,cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 15 mm dia iron or PVC pipes or for unions and fixed complete all as specified and directed

Supply and fixing bib taps,cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 15 mm dia iron or PVC pipes or for unions and fixed complete all as specified and directed

Supply and fixing15 mm dia pillar taps,cast copper alloy with capstan heads chromium plated screwed down, high pressure, with or withou lettered hot or cold with long screwed shanks and fly screwed for iron pipes and fixed for iron or PVC pipes and all connected accessories complete all as specified and directed

Supply and fixing 15 mm dia brass CP mixter for mixing hot & cold water screwed down for iron pipes or PVC pipes and fixed all accessories complete all as specified and directed

Supply and laying 3 layer PP-R (Poly-Proplene randam copolyermer) outer dia of pipes 20 mm dia, concealed pipes SDR 7.4(PN-16) UV stabilized and anti-microbial fusion welded having thermal stability for hot & cold water supply including all PPR plan & brss threaded polypropylene random fittings complete to walls, ceilings or in floors ect 15 mm dia brass CP mixter for mixing hot & cold water screwed down for iron pipes or PVC pipes and fixed all accessories complete all as specified and directed

Supply and laying 3 layer PP-R (Poly-Proplene randam copolyermer) outer dia of pipes 20 mm dia, concealed pipes SDR 7.4(PN-16) UV stabilized and anti-microbial fusion welded having thermal stability for hot & cold water supply including all PPR plan & brss threaded polypropylene random fittings complete to walls, ceilings or in floors ect15 mm dia brass CP mixter for mixing hot & cold water screwed down for iron pipes or PVC pipes and fixed all accessories complete all as specified and directed

Supply and laying 3 layer PP-R (Poly-Proplene randam copolyermer) outer dia of pipes 15 mm dia, concealed pipes SDR 7.4(PN-16) UV stabilized and anti-microbial fusion welded having thermal stability for hot & cold water supply including all PPR plan & brss threaded polypropylene random fittings complete to walls, ceilings or in floors ect15 mm dia brass CP mixter for mixing hot & cold water screwed down for iron pipes or PVC pipes and fixed all accessories

Supply and fixing PPR gate valves outer dia 20 mm(brass insert) as per requirement of the site complete all as specified and directed

Making connection of PP-R pipes of outer dia 16-40 mm distribution branches with PP-R main of following sizes by providing and fixing tee including cutting and making fusion joins etc complete all as specified and directed

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep for foundation of laying cable including getting out in soft/loose soil complete all as specified and directed.

Returning filling in including spreading watering and well ramming in layers not exc 25 cm complete all as specifed .

Removing surplus soil to distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed .

M/S S. N. ENTERPRISES

M/s TECH TEAM

M/s Ats Electricals

ABC CONSTRUCTION COMPANY