Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.8 LAccepted-AOC | L1 | Accepted-AOC Accepting being lowest | |
| 2 | L2₹42.5 L+₹6.9 L (19.3%)Rejected-Finance FLAT NO 203 SEC 14 PLOT NO 142 SHIVSRUTI PARK APARTMENT E WING 1ST FLOOR MOSHI PRADHIKARAN TAL HAVELI DIST PUNE 412 105 | PUNE | MAHARASHTRA | 412105 | L2 | Rejected-Finance Rejected being other than lowest | |
| 3 | Not Admitted-Fee/PreQual/Technical | - | Not Admitted-Fee/PreQual/Technical Others-Slow Progress & also not enlisted appropriate Cat.
Not Recommended. |
Tender Value
₹43.5 L
EMD Value
₹86,900
Closing Date
6 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Lt Col Pramod Kumar Tripathi
Military Engineer Services, Garrison Engineer (South) Ahmednagar - 414002
Certain sanctioned works at Aurangabad under GE (South) Ahmednagar
2023_MES_610199_2
8996/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
Aurangabad
Class D Cat a (i)
8 documents required · 8 mandatory
₹500
Garrison Engineer (South) Ahmednagar
₹86,900
Yes
4 Oct 2023
18 Aug 2023
8 Sept 2023
18 Aug 2023
6 Sept 2023
23 Aug 2023
18 Aug 2023 - 19 Aug 2023
Amount
Demolition of brickwork/PCC block masonry/stone boulder masonry built in cement mortar etc complete all as specified and as directed.
Dismantling of granite stone slabs of any description or thickness in floors, aprons laid bedded and pointed in any mortar etc complete all as specified and as directed.
Dismanlting floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and as directed.
Taking down cement or cement lime plaster on brick/stone walls etc. including racking out joints hacking for key, scrubbing down with water etc complete all as specified and as directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.
Taking down chowkats or frames with shutters(without taking off shutters from the frames), area n.exc 1.50 sqm each and making good disturbed surface of walls in cement mortar (1:3) complete all as specified and as directed.
Taking up or down unserviceable unplasticised PVC / HPDE pipes/ water tubing, 80 mm bore including all fittings complete from walls /floor or trenches all as specified and as directed.
Taking up or down unserviceable unplasticised PVC / HPDE pipes/ water tubing, 40/50 mm bore including all fittings complete from walls /floor or trenches all as specified and as directed.
Taking up or down unserviceable unplasticised PVC / HPDE pipes/ water tubing, 15/20/25 mm bore including all fittings complete from walls /floor or trenches all as specified and as directed.
Dismantling of ACSR or AAC conductors of any size and any description from any heights/ poles or any location, complete all as specified and as directed
Dismantling of HT/LT insulators pin/ shackle/ Disc & loop type from existing OH lines complete all as specified and as directed
Dismantling of mild steel structure, cross arms, bracings, supports, clamps from two/four pole structure at various locations all as specified and as directed.
Dismantling of cradles, earth wire guarding, fabricated with galvanised steel wire 4mm dia hexagonal / rectangular of any type complete all as specified and as directed.
Dismantling of old service cable of any size from pole/panel of any type and size complete all as specified and as directed
Dismantling of old unserviceable LT underground cable of any size including cable protection cover all as specified and as directed.
Dismantling of PCC pole/steel poles of any size (HT/LT) embedded in cement concrete complete all as specified and as directed
Taking up or down 15 mm bore dia GI steel tubing and connections complete all as specified and as directed.
Taking up or down 20 mm bore dia GI steel tubing and connections complete all as specified and as directed.
Excavation in trenches not exceeding 1.5m wide and not exc 1.5 mtr in depth and getting out in soft /loose soil complete all as specified and as directed
Excavation in trenches not exceeding 1.5m wide and not exc 1.5 mtr in depth and getting out in hard /dense soil complete all as specified and as directed
Excavation in trenches not exceeding 1.5 m wide, exc 1.5 mtr but not exc 3.0 m in depth and getting out in hard /dense soil complete all as specified and as directed
Removing excavated soil to a distance n.exc 50 m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and as directed.
Returning, filling in including spreading levelling watering and well ramming in layer not exceeding 25 cm thick complete all as specified and as directed
M&L for PCC 1:4:8, type D2 using 40mm graded stone aggregates for foundation etc complete all as specified and as directed
M&L for PCC 1:3:6, type C1 using 20 mm gradded stone aggregates as in coping of poles, pedestals etc including necessary form work and finishing the surface even and smooth without using extra cement complete all as specified and as directed
M & L for brick work with sub class 'B' bricks, old size, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed.
M&L for second class hardwood , 35 mm thick, factory made, plain framed , panelled shutters (two panels ) with panel of 9 mm thick BWP plywood bonded with high quality phenol-formal-dehyde synthetic resin adhesive, confirming to IS-710, the size of rails & style shall be as per IS -1003 (Part I) kiln seasoned as per IS -1141 & chemically pressure treated as per IS-401 complete all as specified & as directed.
S&F 35 mm thick, second class hard wood, glazed and and skeleton shutters, factory made, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats all as specified and as directed.
S&F 100 mm size mild steel butt hinges, medium weight, cold rolled, ISI marked, complete all as specified and as directed.
S&F 300mm size, mild steel ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and as directed.
S&F mild steel pressed handles, 150 mm long, oval type , stoves enamelled black complete all as specified & as directed.
S&F mild steel sliding door bolt, 300 mm long, stove enamelled black with bright bolt not less than 16 mm dia with & including a minimum of 6 bolts & nuts four on bolt plate and two on staple plate complete all as specified & directed.
S&F mild steel barrel tower bolts, 200 mm long, stove enamelled black, with bright bolts complete all as specified and directed.
S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire & average width of aperature 1.18 mm, fixed with wooden beads / tinned tacks or galvanised wire staples to steel / wooden frame, complete all as specified and as directed.
S&F mild steel framed work of Fe 410-W(Gde-E- 250)quality-A as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.
S&F factory made steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars,dovetailed or welded complete all as specified and directed.
S&F factory made steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay complete without glazing bar with & including fixing flat iron for securing wire mesh complete all as specified and directed.
S&F factory made steel ventilator with top hung shutter including hinges, steel peg stays etc complete all as specified & as directed.
S&F mild steel framed guard bars, confirming to Fe-290-0 or Fe-330-0 welded to steel ventilators & windows etc complete all as specified and as directed.
M&L for 75mm thick PCC 1:4:8, type D2, using 40mm graded stone aggregates as in sub base of flooring complete all as specified and as directed.
M&L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic joint filling at every 3m length and at corners complete all as specified and as directed.
M&L for coloured non-skid ceramic tiles, 7 to 8 mm thick (square or rectangular), area of each tiles exc 0.18 Sqm but n exc 0.38 Sqm as in floors etc, laid over & including 15 mm thick screed bed in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, complete all as specified and as directed.
M&L for glazed coloured ceramic tiles(shade as approved by GE) of size 350mm x 250mm x 7mm/450mm x 350mm x 7 mm thick, as in dado, skirting, risers to step etc laid over and including 10 mm thick backing coat in cement mortar 1:4, jointed in neat cement slurry and pointed in coloured cement to match with colour of tiles complete all as specified and as directed.
M&L for 20mm thick granite(of any type) work (table rubbed & polished ) in window door cills/jambs ,steps, pillars, cooking platform like in cement morter (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade with granite laid over & including 10 mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.
M&L for rendering 15mm thick in cement mortar 1:4 over brick or concrete or stone surfaces, finished even and smooth without using extra cement etc complete all as specified and as directed.
M&L for rendering 15mm thick in cement mortar 1:6 over brick or concrete or stone surfaces finished even and smooth without using extra cement mixed with using water proofing compound etc complete all as specified and as directed.
M&L for preparation of new, plastered or unplastered wall surfaces and applying three coats of white wash complete all as specified and as directed.
M&L for preparation of old, plastered or unplastered decorated wall surfaces including cornices, pillars etc, and applying one coat of white wash complete all as specified and as directed.
M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement paint white or tinted over one coat of primer all as specified and as directed.
M&L for preparation of old plastered or unplastered decorated wall surfaces and applying one coat of cement base paint complete all as specified and as directed.
S&F 3mm thick sheet glass ordinary quality & glazing with oil putty/ wooden beads, in square not exc 0.50 Sqm each pane fixed to wooden, steel frames etc complete all as specified and directed.
M&L for preparation of new wooden surfaces of any description over 10 cm width or girth & applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.
M&L for preparation of new steel surfaces of any description over 10 cm width or girth & applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.
S&F 15mm bore dia GI tubing, medium grade with all fitting and fixed complete to walls and ceilings or concealed in wall, laid in floors complete all as specified and as directed
M&L for 20 mm bore GI tubing medium grade with all fitting and fixed complete on walls and ceilings, or laid in floors etc complete all as specified and as directed.
S&F in repairs, bib tap, 15mm dia, cast copper alloy, fancy type, chromium plated, with crutch or butter- fly handles screwed down for iron pipe or for brass ferrule complete all as specified and as directed.
S&F in repairs, stop valve, 15mm dia, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and as directed.
S&F brass chromium plated mixer, 15mm bore for mixing hot & cold water including for shower screwed down for iron pipe and fixed complete all as specified and as directed.
S&F in repairs, 32 mm bore of pipe low density polythene pipe (LDPE) of pressure rating 6Kgf/sqcm fixed to wall or laid in floor etc including fittings complete all as specified and as directed.
S&F in repairs, grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and as directed.
S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), 1000 litres capacity, tripple layered, hoisted and fixed in position and connecting including dismantling existing water tank all as specified and as directed.
S&F in repairs, ball valves, high pressure, 20 mm bore, PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed, (Minimum weight 142 gms,) complete all as specified and directed.
S&F in repairs, sinks with drainage board, made of stainless steel 1mm thick, glossy, kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mmx460mm, bowl size 410mm x 352mm x 200mm {or nearest size} including down take pipe and coupling CP complete fixed complete all as specified and directed. Make : Cat part No. SBSD 05(RR) of Jayna or of equivalent model in other makes specified in list of approved makes.
S&F in repairs, 75mm dia, PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls all as specified and as directed.
S&F in repairs, PVC (SWR) bends, 75 mm dia with access door complete all as specified and as directed.
Taking down carefully copper/Aluminum point wiring (Light, Fan, Socket or power) complete fitting such as switches, ceiling, regulator, sockets, light fittings, DBs etc and making good disturbed surfaces of walls, floors etc all as specified and as directed
Taking down submain wiring including casing caping of any size and any description all as specified and as directed.
M&L for point wiring for light point/Fan point complete with 1.5 Sqmm single core ,multistranded ,copper conductor fire retardant,PVC insulated and unsheathed cable 650/1100 volts grade, confirming to IS-694 1990,drawn through and including PVC Casing and caping of size 25mm / 20 mm dia with all accessories as specified with modular cover plate with frame and modular PVC boxes,blank plate for mounting fitting & fixtures like switches sockets and fan regulators etc including copper earth continuity wire for PVC insulated of size 1.5 Sqmm for one light Point controlled by one way switch complete all as specified and as directed.
All as per serial item No 68 but for 5 Amps socket in same board with 1.5 sq mm cable complete all as specified and as directed.
All as per serial Item No 68 but for 5 Amps socket in independent board with 1.5 Sqmm cable complete all as specified and as directed.
All as per serial Item No 68 but for power point 3 pin switch socket 15 Amp with PVC copper conductor cable multistrand unsheathed 2.5 Sqmm on independent board including one run 1.5 Sqmm multistrand PVC copper conductor cable for earth continuity in and including PVC casing and capping fixed on wall including including PVC box 2 mm thick complete all as specified and as directed.
S&F modular switch, single pole, one way, 6/10 Amps, 1 module complete all as specified and as directed.
S&F modular switch, single pole, one way, 16 Amps, 1 module complete all as specified and as directed.
S&F modular fan regulator, step type , 120W, 2 Module complete all as specified & as directed.
S&F modular socket, 6 amp, 2/3 pin, combined, 2 module complete all as specified and as directed.
S&F modular socket, 6 A/16 amp, 2/3 pin, combined, 2 module complete all as specified and as directed.
S&F ceiling rose, surface bakelite, three terminal type complete all as specified and as directed.
S&F lamp holder, PVC/Polycarbonate type with back plate, suitable for batten fittings complete all as specified and as directed.
S&F lamp, LED 9/10 Watt, 230 volts 50 Hz AC complete all as specified and as directed.
S&F LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.
S&F LED light fitting, mirror type with high out put diffuser 2 feet, 5 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.
S&F MCB DB, double door, 12 way, SPN with suitable rated busbar, 240 V complete all as specified and as directed.
S&F MCB DB, double door, 8 way, SPN with suitable rated busbar, 240 V complete all as specified and as directed.
S&F MCB single pole & Neutral (DP), 240 volts, 40-63 Amps, "C" curve complete all as specified and as directed.
S&F MCB single pole, 240 volts, 6 to 32 Amps, "C" curve complete all as specified and as directed.
S&F MCB "C" curve TPN 40-100 Amps, 415 V complete all as specified and as directed.
S&F sheet metal enclosure, SPN with 2 pin and earth plug and socket complete with and including single pole, 20 Amps MCB, 240V all as specified and as directed.
Supply and errection of steel tubular swaged poles complete with cast iron base plate, finial tapper plug, bolts, nuts & screws as specified type 410 SP-55, 9.00 Mtr long including one coat of red-oxide zinc chrome primer and two coats of aluminium paint on surfaces exposed to view and making 30cm wide strips (total 5 Nos) with yellow and black paint alternately on external surface above PCC benching and painting with bituminous paint internally including writing the pole number in white letters on black background complete and externally for portion embedded in PCC, complete all as specified and as directed. Note :- Excavation & earthwork and PCC in foundation of poles, coping etc shall be measured and paid saperately under respective item.
M&L for double walled corrugated DWC HDPE pipe of outer dia 50 mm and Internal dia 38 mm, including 90 degree bends with coupler and rubber ring, laid in trenches, suitable for cable protection of size 2 core, 10 Sqmm to 3.5 core 70 Sqmm complete all as specified and as directed.
M&L for double walled corrugated DWC HDPE pipe of outer dia 90 mm and internal dia 78 mm, including 90 degree bends with coupler and rubber ring, laid in trenches, suitable for cable protection of size 3/3.5 core, 95 Sqmm to 120 Sqmm complete all as specified and as directed.
Supply, laying and testing 10Sqmm 2Core, XLPE insulated, PVC sheathed, conforming to relevant IS, ISI marked, earthed system, armoured heavy duty, electric cable with aluminium conductor, 1100 volts grade, in trenches/wall/floor/pole complete and making connection including suitable size Aluminium lugs complete all as specified and as directed
All as per serial item No 91 but 16 Sqmm 2 core
All as per serial item No 91 but 16 Sqmm 4 core
All as per serial item No 91 but 25 Sqmm 3.5 core
All as per serial item No 91 but 35 Sqmm 3.5 core
All as per serial item No 91 but 50 Sqmm 3.5 core
All as per serial item No 91 but 70 Sqmm 3.5 core
All as per serial item No 91 but 95 Sqmm 3.5 core
All as per serial item No 91 but 120 Sq mm 3.5 core
S&F FRP junction box, light weight, low corrossive, suitable for pole mounting, including MCB SP 6 Amps, box size 250x200x100mm including necessary connection for loop in and loop out cable connector and suitable size for cable glands complete all as specified and as directed.
M& L for PVC 3 core copper wire, flexible type of size 1.5 sqmm in PVC conduit 20 mm dia for street light, connection of length as per site requirement from junction box to street light complete all as specified and as directed .
S&F in replacement, LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including electric connection with suitable 3 core wire complete all as specified and as directed
S&F LED street light fitting 45 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including PVC copper wire 1.5 sqmm of suitable length for connection of street light from overhead conductor /junction box complete all as specified and as directed.
S&F cable route indicator made out cast iron and embedded HT cable on the plate of size 80 mm dia 5 mm thick and grouting lug of suitable size including grouting in and including PCC 1:2:4 type B1 in foundation of suitable size complete all as specified and as directed.
S&F in replacement bracket for street light, made out of GI pipe medium grade of suitable size (40 mm dia and 1.2 mtr long) bent to shape, fixed with and including necessary heavy duty clamps of suitable size including painting the clamps with two coats of synthetic enamel paint over a coat of primer all as specified and as as directed
S&F danger notice plate of 1.6 mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with mild steel clamps, bolts and nuts of approved size, for LT, 20x15 cm size all as specified and as directed.
M&L for prepration surfaces of LT Poles including cross arms, channels, clamps etc by scrapping old paint and applying two coats of aluminium paint on surfaces exposed to view and making 30cm wide strips (total 5 Nos) with yellow and black paint alternately on external surface above PCC benching including writing the pole number in white letters on black background complete and externally for portion embedded in PCC with black colour, complete all as specified and as directed.
M&L for heat shrinkable straight through joint kit suitable for 2/3.5 core 10sqmm to 35sqmm LT cable 1100 Volts grade complete all as specified and as directed
M&L for heat shrinkable straight through joint kit suitable for 4/3.5 core 50sqmm to 120sqmm LT cable 1100 Volts grade complete all as specified and as directed
M&L for cutting existing road/hard standing surfaces to a depth of 60 cm and 50 cm width and getting out for laying under ground cable/pipe including returning filling in, watering well ramming in layers not exceeding 25cm in soil and filling the trench top with 15 cm thick PCC 1:2:4, type B1 (using 20 mm graded stone aggregate) and making good the disturbed surface complete all as specified and as directed.
Fixing only existing serviceable street light with GI bracket retrieved from taking down LT Pole of any size and capacity complete all as specified and as directed
Taking out old unserviceable GI pipe, 40mm/50mm bore, light grade complete all as specified and as as directed
S&F GI steel tubing, 40 mm bore, light grade, ISI marked for protection of under ground cable on pole/wall/under road complete all as specified and as directed
S&F GI steel tubing, 50 mm bore, light grade, ISI marked for protection of under ground cable on pole/wall/under road complete all as specified and as directed
S&F CPRI approved including testing commissioning of new LT feeder pillar box double door factory fabricated outdoor type front openable with locking arrangement compartmental type made out of 3.15 mm thick CRCA sheet epoxy painted and two coats of synthetic enameled paint over a coat of red oxide, of suitable size for comprising the acessories below given, complete mounted on and including MS angle iron frame made out of 40 mm x 40x6mm thick of suitable size painted with black syntheic enamel paint over a coat of red oxide primer embeded in PCC (1:2:4) type B-1 in foundation upto the depth of 300mm and 150mm above ground level incl necessary excavation and earth work suitable for housing and including the following accessories:- (a) MCCB 630 Amp 4 pole 50 KA with overload & adjustable thermal release setting - 01No ,(Incoming) (b) MCCB 315 Amp 4 Pole 35/36 KA with overload & adjustable thermal release setting -01 Nos (outgoing ) (c) MCCB 160 Amps 4 pole 35/36 KA with adjustable thermal releasesetting-02 Nos (outgoing, 01 No as stand by) (d) MCCB 63 Amp 4 Pole 16 KA with adjustable thermal releasesetting-01 Nos (outgoing) (e) MCB TPN 63 Amp 10 KA -02 Nos (outgoing) (f) MCB SPN 63 Amp 'C' curve 10KA -02 Nos (outgoing) (g) Astronomical time switch 1P Module, 24 hours program, Programmable every 15 min., backup of 100 hours, current capacity 16A, with 1 changeover (1 CO) complete with all accessories - 01 Nos (h) Copper bus bar 750 Amp of suitable size -01 Set(RYB) (j) LEd type Indicator lamp-01 set (RYB) (k) Digital panel mounted multifunctional meter Amp/volt & Frequency with LED Display-01 No
S&F CPRI approved including testing commissioning of new LT feeder pillar box double door factory fabricated outdoor type front openable with locking arrangement compartmental type made out of 3.15 mm thick CRCA sheet epoxy painted and two coats of synthetic enameled paint over a coat of red oxide of suitable size comprising the given below accessories, complete mounted on and including MS angle iron frame made out of 40x40x6mm thick of suitable size painted with black synthetic enameled paint over a coat of red oxide primer embedded in PCC (1:2:4) type B-1 in foundation up to the depth of 300mm and 150mm above ground level incl. necessary excavation and earth work suitable for housing and including the following accessories :- (a) MCCB 315 Amp 4 pole 35/36 KA with overload & thermal release setting - 01No , (Incoming) (b) MCCB 200 Amp 4 Pole 25 KA with overload & thermal release setting - 02 Nos (outgoing, 01 No as stand by) (c) MCCB 100 Amp 4 Pole 25 KA with overload & thermal release setting - 01 Nos (outgoing) (d) MCB TPN 63 Amp 10 KA -01 Nos (outgoing) (e) MCB SPN 63 Amp 'C' curve 10KA -02 Nos (outgoing) (f) Astronomical time switch 1P Module, 24 hours program, Programmable every 15 min., backup of 100 hours, current capacity 16A, with 1 changeover (1 CO) complete with all accessories - 01 Nos (g) Copper bus bar 400 Amp of suitable size -01 Set(RYB) (h) LED type Indicator lamp-01 set (RYB) (j) Digital panel mounted multifunctional meter Amp/volt & Frequency with LED Display-01 No
S&F CPRI approved including testing commissioning of new LT feeder pillar box double door factory fabricated outdoor type front openable with locking arrangement compartmental type made out of 3.15 mm thick CRCA sheet epoxy painted and two coats of synthetic enameled paint over a coat of red oxide of suitable size for comprising given below accessories complete mounted on and including MS angle iron frame made out of 40x40x6mm thick of suitable size painted with black synthetic enameled paint over a coat of red oxide primer embedded in PCC (1:2:4) type B-1 in foundation upt o the depth of 300mm and 150mm above ground level including necessary excavation and earth work suitable for housing and including the following accessories :- (a) MCCB 400 Amp 4 pole 35/36 KA with overload & thermal release setting - 01 No (Incoming) (b) MCCB 200 Amp 4 pole 25 KA with overload & adjustable thermal release setting - 01 No (c) MCCB 125A, 4 pole 25 KA with overload and adjustable thermal release setting - 02 Nos (Outgoing). (d) MCCB 63 Amp 4 Pole 16 KA with overload & adjustable thermal release setting -01 No (Outgoing) (e) MCB TPN 63 Amp 10 KA -01 Nos (outgoing) (f) MCB SPN 63 Amp 'C' curve 10KA -02 Nos (outgoing) (g) Astronomical time switch 1P Module, 24 hours program, Programmable every 15 min., backup of 100 hours, current capacity 16A, with 1 changeover (1 CO) complete with all accessories - 01 Nos (h) Copper bus bar 400 Amp of suitable size -01 Set.(RYB (j) LED type indicator lamp - 01 Set (03 Nos) (k) Digital panel mounted multifunctional meter Amp/volt & Frequency with LED Display-01 No
S&F CPRI approved including testing commissioning of new LT feeder pillar box double door factory fabricated outdoor type front openable with locking arrangement compartmental type made out of 3.15 mm thick CRCA sheet epoxy painted and two coats of synthetic enameled paint over a coat of red oxide of suitable size for comprising given below accessories complete mounted on and including MS angle iron frame made out of 40x40x6mm thick of suitable size painted with black synthetic enameled paint over a coat of red oxide primer embedded in PCC (1:2:4) type B-1 in foundation upt o the depth of 300mm and 150mm above ground level including necessary excavation and earth work suitable for housing and including the following accessories :- (a) MCCB 125 Amp 4 pole 25 KA with overload & thermal release setting - 01 No (Incoming) (b) MCCB 63 Amp 4 pole 25 KA with overload & adjustable thermal release setting - 02 No (c) MCCB MCB TPN 63 Amp 10 KA -01 Nos (outgoing) (d) MCB SPN 63 Amp 'C' curve 10KA - 02 Nos (outgoing) (e) Astronomical time switch 1P Module, 24 hours program, Programmable every 15 min., backup of 100 hours, current capacity 16A, with 1 changeover (1 CO) complete with all accessories - 01 Nos (f) Copper bus bar 250 Amp of suitable size -01 Set.(RYB (g) LED type indicator lamp - 01 Set (03 Nos) (h) Digital panel mounted multifunctional meter Amp/volt & Frequency with LED Display-01 No
M&L for galvanised iron pipe 80mm bore, medium grade, in any length, complete including necessary fittings, laid in trenches, including jointing and testing complete all as specified and as directed.
All as per serial item No. 119 but 50 mm bore .
All as per serial item No. 119 but 40 mm bore.
All as per serial item No. 119 but 25 mm bore.
All as per serial item No. 119 but 20 mm bore.
S&F in repairs sluice valve cast iron 80 mm bore long body both ends flanged as per IS-14846 and drilled with stainless steel spindle, iron wheel head and as per pressure rating PN 1.6, Class I, ISI marked alongwith nuts, bolts, washers, gaskets etc. and fixed in position including dismantling and taking out old unserviceable sluice valve from valve chamber / trenches etc complete all as specified and as directed.
S&F in repairs gun metal globe or gate valve (ISI marked), with iron wheel head, screwed both ends, suitable for 20 mm bore iron pipe and fixed including testing complete all as specifed and as directed.
All as per serial item No. 125 but 25 mm bore pipe.
All as per serial item No. 125 but 40 mm bore pipe.
All as per serial item No. 125 but 50 mm bore pipe.
S&F in repairs ball brass valves, 25 mm dia, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed .
S&F in repairs ball brass valves, 20mm dia, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed
M&L for valve chamber of size 450 mm x 450 mm x 450 mm including necessary earth work in any type of soil , PCC 1:3:6 in base concrete 100 mm thick, brick work in CM (1:6) with 10 mm thick plaster internally and 15 mm thick externally in CM (1:4), 3mm thick MS sheet cover with hinges and locking arrangements fixed to angle iron frame made out of 50 mm x 50 mm x 6 mm MS angle complete with two coats of synthetic enamelled paint over a coat of red oxide on all steel work and three coats of white washing on plastered surface of valve chamber complete including dismantling old valve chamer all as specified and directed.
S&F steel body desert cooler electric driven (single phase) with water tank, having nominal air flow capacity of 4000 CUM per hour (or nearest size) complete with suitable size of Iron stand for mounting of desert cooler including grouting into the wall complete all as specified and directed.
S&F electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV- 02 Nos,15mm bore PVC connections 450mm long with washers on both sides including necessary pipe line connection complete with all acessories all as specified and as directed .
M&L for sub main wiring with 2 runs of 6.0 sqmm, single core, PVC insulated & unsheathed cable, conforming to IS-694, 1100 volts with copper conductor, multi stranded, drawn in and including suitable size PVC cassing capping (ISI marked) with all accessories such as Tees, Elbows, junction box etc as requied alongwith one run of 4.0 sqmm single core PVC insulated & unsheathed copper conductor as continuous earth wire dolly and connecting to existing main switch board / distribution board of each building as ordered and testing on completion all as specified and as directed. Note : Two runs of 6.0 Sqmm cable, one run of 6.0 Sqmm cable and one run of PVC casing/caping will be measured as one Rm unit.
M&L for sub main wiring with 2 runs of 4.0 sqmm, single core, PVC insulated & unsheathed cable, conforming to IS-694, 1100 volts with copper conductor, multi stranded, drawn in and including suitable size PVC cassing capping (ISI marked) with all accessories such as Tees, Elbows, junction box etc as requied alongwith one run of 4.0 sqmm single core PVC insulated & unsheathed copper conductor as continuous earth wire dolly and connecting to existing main switch board / distribution board of each building as ordered and testing on completion all as specified and as directed. Note : Two runs of 4.0 Sqmm cable, one run of 4.0 Sqmm cable and one run of PVC casing/caping will be measured as one Rm unit.
M&L for earthing complete with galvanised steel earth plate electrode, 60cm x 60cm x 6.mm thick, burried directly in ground(earth pit not less than 2.25metre deep below normal ground level) with top edge of earth plate not less than 1.5 metre below normal ground level, connected to and including galvanised earth lead wire of 4 mm dia from earth pit to each qtr DB by means of nuts & bolts, check nuts and washers of galvanised including PCC pit of 1:2:4, type B-1, cover reinforced with XPM weight not less than 4 Kg/Sqm and 6mm dia bar handle, mild steel angle iron 25 x 25 x 3mm in frame, excavation and earth work in any type of soil, charcoal dust, salt, light grade GI watering pipe 20mm dia with funnel and wire -mesh and medium grade GI protection pipe of 15mm bore from top edge of earth plate upto main distribution board complete all to as shown in electrical plate no 3 of MES sch 2009 (Part I), including taking down old earthing & connected main switch board all as specified and testing on completion.
M&L for earthing with galvanised steel earth plate electrode 60cm x 60cm x 6.0mm thick buried directly in ground vertically at a depth not less than 2.25metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using Galvanised Iron strip of 32 x 6 mm as earthing lead (upto the body of the equipment) by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and protected by light grade 40mm dia GI pipe connected to main switch board or main control board and GI pipe medium grade 20mm bore for watering and including funnel, wire mesh, RCC pit cover and PCC chamber pit with PCC (1:3:6) type C-2 using 40mm graded stone aggregate, including excavation and earth work in any type of soil, returning, filling in approved soil and disposal of surplus soil to a distance not exceeding 50m all as specified and shown in electrical plate No 3 of SSR 2020(Part-I) complete all as specified and directed.
SKS Electricals
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .