Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.5 LAccepted-AOC | ₹38.5 L Quoted ₹39.4 L | L1 | Accepted-AOC Admitted being L1 |
| 2 | L2₹41.6 LRejected-Finance | ₹41.6 L | L2 | Rejected-Finance Not admitted being L2 |
| 3 | L3₹42.8 LRejected-Finance | ₹42.8 L | L3 | Rejected-Finance Not admitted being L3 |
| 4 | L4₹46.7 LRejected-Finance 1501 BHAGWATI EMINENCE SAVITRIBAI PHULE MARG BESIDES R R PATIL GARDEN SECTION 13 NERUL E NAVI MUMBAI | RAIGAD | MAHARASHTRA | 400702 | ₹46.7 L | L4 | Rejected-Finance Not admitted being L4 |
| 5 | L5₹50.3 LRejected-Finance FLAT NO 201 GREEN VALLEY CHS PLOT NO 26 SECTOR 19 NERUL EAST NAVI MUMBAI 400 706 | THANE | MAHARASHTRA | 400706 | ₹50.3 L | L5 | Rejected-Finance Not admitted being L5 |
| Sl No | Description | Qty | Unit | D.N.PATIL L3 | M.K Enterprises L5 | SREE HARITHA ASSOCIATES L4 | India enterprices L1 | M/S Royal Enterprises L2 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | Maintenance and servicing to DG set including cleaning of DG set canopy,radiator and other parts with alkaline based chemical (water based) including replacement of defective and worn out minor filters gaskets, V- belts, Engine oil, rubber hoses, worm drive clamps, nuts, bolts and cleaning of alternator with vaccum cleaner and attending faults of AMF panels etc, tappet settings if required and greasing/oiling of bearings of engine , alternator and other moving parts checking of batteries, applying petroleum jelly to battery terminals, adding distilled water checking the oil, coolent levels of capacity 625 KVA DG set installed complete all as directed by Engr-in-Charge.
Note:- (i) Spares required for maintenance will be measured and paid seprately under relevant items.
(ii) Servicing to be carried out as per manufacturer’s specifications/ instructions
(iii) Work shall be carried out at site at different location. | 2 | Each Job | 3,600 ₹7,200 | 5,200 ₹10,400 | 3,700 ₹7,400 | 3,400 ₹6,800 | 2,000 ₹4,000 |
| 2.00 | Supply only the following spare parts of existing make and capacity and should be compactable & suitable for 625 KVA DG Set, complete all as directed by Engr-in-Charge:-
(a). TECHO Cable | 2 | Each | 440 ₹880 | 600 ₹1,200 | 500 ₹1,000 | 390 ₹780 | 1,500 ₹3,000 |
| 3.00 | (b). PRIMING PUMP | 1 | Each | 9,800 ₹9,800 | 12,700 ₹12,700 | 10,000 ₹10,000 | 9,400 ₹9,400 | 10,000 ₹10,000 |
| 4.00 | (c). O RING | 4 | Each | 100 ₹400 | 165 ₹660 | 150 ₹600 | 100 ₹400 | 1,000 ₹4,000 |
| 5.00 | (d). SUPER BYPASS FILTER WITH O RING | 2 | Each | 1,200 ₹2,400 | 1,600 ₹3,200 | 1,500 ₹3,000 | 1,100 ₹2,200 | 1,000 ₹2,000 |
| 6.00 | (e). RADIATOR HOSE SET | 1 | Each Set | 9,700 ₹9,700 | 12,000 ₹12,000 | 11,000 ₹11,000 | 9,400 ₹9,400 | 10,000 ₹10,000 |
| 7.00 | (f). CLAMP SET | 1 | Each Set | 5,500 ₹5,500 | 7,000 ₹7,000 | 6,000 ₹6,000 | 5,000 ₹5,000 | 5,000 ₹5,000 |
| 8.00 | (g). AIR CLEANER HUMP HOSE | 4 | Each | 1,700 ₹6,800 | 2,200 ₹8,800 | 2,000 ₹8,000 | 1,500 ₹6,000 | 1,500 ₹6,000 |
| 9.00 | (h). AIR CLEANER HUMP HOSE CLAMP | 2 | Each | 325 ₹650 | 600 ₹1,200 | 500 ₹1,000 | 290 ₹580 | 500 ₹1,000 |
| 10.00 | (j). TURBO HUMP HOSE | 2 | Each | 1,150 ₹2,300 | 1,400 ₹2,800 | 1,000 ₹2,000 | 1,000 ₹2,000 | 1,200 ₹2,400 |
Updated dates
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
11 Apr 2026, 6:00 pmClosed
GE NW KARANJA
NAVAL STATION KARANJA, URAN, RAIGAD, MAHARASHTRA
COMPREHENSIVE MAINT OF DG SETS WITH INCLUDING REPLACEMENT OF FUEL FILTER OIL FILTER AIR FILTER CALIBRATION OF NOZZLE SYSTEM REPLACEMENT OF AVR DISPLY BOAD REWINDING OF ALTERNATORS OF DIFFERENT CAPACITY MAINT OF AMF PANEL LT PANEL TIMER SWITCH
2026_MES_756105_1
8275/E8
Open Tender
Electrical and Maintenance Works
180 days
GE NW KARANJA
As per tender documents
8 documents required · 8 mandatory
₹500
Yes
₹98,000
Yes
9 May 2026
13 Mar 2026
13 Apr 2026
13 Mar 2026
11 Apr 2026
27 Mar 2026
Maintenance and servicing to DG set including cleaning of DG set canopy,radiator and other parts with alkaline based chemical (water based) including replacement of defective and worn out minor filters gaskets, V- belts, Engine oil, rubber hoses, worm drive clamps, nuts, bolts and cleaning of alternator with vaccum cleaner and attending faults of AMF panels etc, tappet settings if required and greasing/oiling of bearings of engine , alternator and other moving parts checking of batteries, applying petroleum jelly to battery terminals, adding distilled water checking the oil, coolent levels of capacity 625 KVA DG set installed complete all as directed by Engr-in-Charge. Note:- (i) Spares required for maintenance will be measured and paid seprately under relevant items. (ii) Servicing to be carried out as per manufacturer’s specifications/ instructions (iii) Work shall be carried out at site at different location.
Supply only the following spare parts of existing make and capacity and should be compactable & suitable for 625 KVA DG Set, complete all as directed by Engr-in-Charge:- (a). TECHO Cable
(b). PRIMING PUMP
(c). O RING
(d). SUPER BYPASS FILTER WITH O RING
(e). RADIATOR HOSE SET
(f). CLAMP SET
(g). AIR CLEANER HUMP HOSE
(h). AIR CLEANER HUMP HOSE CLAMP
(j). TURBO HUMP HOSE
(k). TURBO HUMP HOSE CLAMP
(l). VENT HOSE PIPE
(m). Lub oil filter
(n). FUEL PRE FILTER
(o). FUEL MICRO FILTER
(p). AIR FILTER PRIME
(q). AIR FILTER SECOND
(r). OIL TEMP. GAUGE
(s). WATER TEMP. GAGUE
(t). OIL PRESSURE GAUGE
(u). Fan Belt
(v). Uniball Joint
(w). Thermostate
(x). Hose diesel ( 7 Ft. )
(y). Oil filter head gasket
(z). RPM meter
Maintenance and servicing to DG set including cleaning of DG set canopy,radiator and other parts with alkaline based chemical (water based) including replacement of defective and worn out minor filters gaskets, V- belts, Engine oil, rubber hoses, worm drive clamps, nuts, bolts and cleaning of alternator with vaccum cleaner and attending faults of AMF panels etc, tappet settings if required and greasing/oiling of bearings of engine , alternator and other moving parts checking of batteries, applying petroleum jelly to battery terminals, adding distilled water checking the oil, coolent levels of capacity 500 KVA DG set installed complete all as specified and directed. Note:- (i) Spares required for maintenance will be measured and paid seprately under relevant items. (ii) Servicing to be carried out as per manufacturer’s specifications/ instructions (iv) Work shall be carried out at site at different location
Supply only the following spare parts of existing make and capacity and should be compactable & suitable for 500 KVA DG Set, complete all as directed by Engr-in-Charge:- (a). TECHO Cable
(b). PRIMING PUMP
(c). O RING
(d). SUPER BYPASS FILTER WITH O RING
(e). RADIATOR HOSE SET
(f). CLAMP SET
(g). AIR CLEANER HUMP HOSE
(h). AIR CLEANER HUMP HOSE CLAMP
(j). TURBO HUMP HOSE
(k). TURBO HUMP HOSE CLAMP
(l). VENT HOSE PIPE
(m). Lub oil filter
(n). FUEL PRE FILTER
(o). FUEL MICRO FILTER
(p). AIR FILTER PRIME
(q). AIR FILTER SECOND
(r). OIL TEMP. GAUGE
(s). WATER TEMP. GAGUE
(t). OIL PRESSURE GAUGE
(u). Fan Belt
(v). Uniball Joint
(w). Thermostate
(x). Hose diesel ( 7 Ft. )
(y). Oil filter head gasket
(z). RPM meter
Maintenance and servicing to DG set including cleaning of DG set canopy,radiator and other parts with alkaline based chemical (water based) including replacement of defective and worn out minor filters gaskets, V- belts, Engine oil, rubber hoses, worm drive clamps, nuts, bolts and cleaning of alternator with vaccum cleaner and attending faults of AMF panels etc, tappet settings if required and greasing/oiling of bearings of engine , alternator and other moving parts checking of batteries, applying petroleum jelly to battery terminals, adding distilled water checking the oil, coolent levels of capacity 320-400 KVA DG set installed complete all as specified and directed. Note:- (i) Spares required for maintenance will be measured and paid seprately under relevant items. (ii) Servicing to be carried out as per manufacturer’s specifications/ instructions (iv) Work shall be carried out at site at different location
Supply only the following spare parts of existing make and capacity and should be compactable & suitable for 320-400 KVA DG Set, complete all as directed by Engr-in-Charge:- (a). TECHO Cable
(b). PRIMING PUMP
(c). O RING
(d). SUPER BYPASS FILTER WITH O RING
(e). RADIATOR HOSE SET
(f). CLAMP SET
(g). AIR CLEANER HUMP HOSE
(h). AIR CLEANER HUMP HOSE CLAMP
(j). TURBO HUMP HOSE
(k). TURBO HUMP HOSE CLAMP
(l). VENT HOSE PIPE
(m). Lub oil filter
(n). FUEL PRE FILTER
(o). FUEL MICRO FILTER
(p). AIR FILTER PRIME
(q). AIR FILTER SECOND
(r). OIL TEMP. GAUGE
(s). WATER TEMP. GAGUE
(t). OIL PRESSURE GAUGE
(u). Fan Belt
(v). Uniball Joint
(w). Thermostate
(x). Hose diesel ( 7 Ft. )
(y). Oil filter head gasket
(z). RPM meter
Maintenance and servicing to DG set including cleaning of DG set canopy,radiator and other parts with alkaline based chemical (water based) including replacement of defective and worn out minor filters gaskets, V- belts, Engine oil, rubber hoses, worm drive clamps, nuts, bolts and cleaning of alternator with vaccum cleaner and attending faults of AMF panels etc, tappet settings if required and greasing/oiling of bearings of engine , alternator and other moving parts checking of batteries, applying petroleum jelly to battery terminals, adding distilled water checking the oil, coolent levels of capacity 180-250 KVA DG set installed complete all as specified and directed. Note:- (i) Spares required for maintenance will be measured and paid seprately under relevant items. (ii) Servicing to be carried out as per manufacturer’s specifications/ instructions (iv) Work shall be carried out at site at different location
Supply only the following spare parts of existing make and capacity and should be compactable & suitable for 180-250 KVA DG Set, complete all as directed by Engr-in-Charge:- (a). TECHO Cable
(b). PRIMING PUMP
(c). O RING
(d). SUPER BYPASS FILTER WITH O RING
(e). RADIATOR HOSE SET
(f). CLAMP SET
(g). AIR CLEANER HUMP HOSE
(h). AIR CLEANER HUMP HOSE CLAMP
(j). TURBO HUMP HOSE
(k). TURBO HUMP HOSE CLAMP
(l). VENT HOSE PIPE
(m). Lub oil filter
(n). FUEL PRE FILTER
(o). FUEL MICRO FILTER
(p). AIR FILTER PRIME
(q). AIR FILTER SECOND
(r). OIL TEMP. GAUGE
(s). WATER TEMP. GAGUE
(t). OIL PRESSURE GAUGE
(u). Fan Belt
(v). Uniball Joint
(w). Thermostate
(x). Hose diesel ( 7 Ft. )
(y). Oil filter head gasket
(z). RPM meter
Maintenance and servicing to DG set including cleaning of DG set canopy,radiator and other parts with alkaline based chemical (water based) including replacement of defective and worn out minor filters gaskets, V- belts, Engine oil, rubber hoses, worm drive clamps, nuts, bolts and cleaning of alternator with vaccum cleaner and attending faults of AMF panels etc, tappet settings if required and greasing/oiling of bearings of engine , alternator and other moving parts checking of batteries, applying petroleum jelly to battery terminals, adding distilled water checking the oil, coolent levels of capacity 100-125 KVA DG set installed complete all as specified and directed. Note:- (i) Spares required for maintenance will be measured and paid seprately under relevant items. (ii) Servicing to be carried out as per manufacturer’s specifications/ instructions (iv) Work shall be carried out at site at different location
Supply only the following spare parts of existing make and capacity and should be compactable & suitable for 100-125 KVA DG Set, complete all as directed by Engr-in-Charge:- (a). TECHO Cable
(b). PRIMING PUMP
(c). O RING
(d). SUPER BYPASS FILTER WITH O RING
(e). RADIATOR HOSE SET
(f). CLAMP SET
(g). AIR CLEANER HUMP HOSE
(h). AIR CLEANER HUMP HOSE CLAMP
(j). TURBO HUMP HOSE
(k). TURBO HUMP HOSE CLAMP
(l). VENT HOSE PIPE
(m). Lub oil filter
(n). FUEL PRE FILTER
(o). FUEL MICRO FILTER
(p). AIR FILTER PRIME
(q). AIR FILTER SECOND
(r). OIL TEMP. GAUGE
(s). WATER TEMP. GAGUE
(t). OIL PRESSURE GAUGE
(u). Fan Belt
(v). Uniball Joint
(w). Thermostate
(x). Hose diesel ( 7 Ft. )
(y). Oil filter head gasket
(z). RPM meter
Maintenance and servicing to DG set including cleaning of DG set canopy,radiator and other parts with alkaline based chemical (water based) including replacement of defective and worn out minor filters gaskets, V- belts, Engine oil, rubber hoses, worm drive clamps, nuts, bolts and cleaning of alternator with vaccum cleaner and attending faults of AMF panels etc, tappet settings if required and greasing/oiling of bearings of engine , alternator and other moving parts checking of batteries, applying petroleum jelly to battery terminals, adding distilled water checking the oil, coolent levels of capacity 62.5 KVA DG set installed complete all as specified and directed. Note:- (i) Spares required for maintenance will be measured and paid seprately under relevant items. (ii) Servicing to be carried out as per manufacturer’s specifications/ instructions (iv) Work shall be carried out at site at different location
Supply only the following spare parts of existing make and capacity and should be compactable & suitable for 62.5 KVA DG Set, complete all as directed by Engr-in-Charge:- (a). TECHO Cable
(b). PRIMING PUMP
(c). O RING
(d). SUPER BYPASS FILTER WITH O RING
(e). RADIATOR HOSE SET
(f). CLAMP SET
(g). AIR CLEANER HUMP HOSE
(h). AIR CLEANER HUMP HOSE CLAMP
(j). TURBO HUMP HOSE
(k). TURBO HUMP HOSE CLAMP
(l). VENT HOSE PIPE
(m). Lub oil filter
(n). FUEL PRE FILTER
(o). FUEL MICRO FILTER
(p). AIR FILTER PRIME
(q). AIR FILTER SECOND
(r). OIL TEMP. GAUGE
(s). WATER TEMP. GAGUE
(t). OIL PRESSURE GAUGE
(u). Fan Belt
(v). Uniball Joint
(w). Thermostate
(x). Hose diesel ( 7 Ft. )
(y). Oil filter head gasket
(z). RPM meter
Maintenance and servicing to DG set including cleaning of DG set canopy,radiator and other parts with alkaline based chemical (water based) including replacement of defective and worn out minor filters gaskets, V- belts, Engine oil, rubber hoses, worm drive clamps, nuts, bolts and cleaning of alternator with vaccum cleaner and attending faults of AMF panels etc, tappet settings if required and greasing/oiling of bearings of engine , alternator and other moving parts checking of batteries, applying petroleum jelly to battery terminals, adding distilled water checking the oil, coolent levels of capacity 15-30 KVA DG set installed complete all as specified and directed. Note:- (i) Spares required for maintenance will be measured and paid seprately under relevant items. (ii) Servicing to be carried out as per manufacturer’s specifications/ instructions (iv) Work shall be carried out at site at different location
Supply only the following spare parts of existing make and capacity and should be compactable & suitable for 15-30 KVA DG Set, complete all as directed by Engr-in-Charge:- (a). TECHO Cable
(b). PRIMING PUMP
(c). O RING
(d). SUPER BYPASS FILTER WITH O RING
(e). RADIATOR HOSE SET
(f). CLAMP SET
(g). AIR CLEANER HUMP HOSE
(h). AIR CLEANER HUMP HOSE CLAMP
(j). TURBO HUMP HOSE
(k). TURBO HUMP HOSE CLAMP
(l). VENT HOSE PIPE
(m). Lub oil filter
(n). FUEL PRE FILTER
(o). FUEL MICRO FILTER
(p). AIR FILTER PRIME
(q). AIR FILTER SECOND
(r). OIL TEMP. GAUGE
(s). WATER TEMP. GAGUE
(t). OIL PRESSURE GAUGE
(u). Fan Belt
(v). Uniball Joint
(w). Thermostate
(x). Hose diesel ( 7 Ft. )
(y). Oil filter head gasket
(z). RPM meter
Material and labour for disconnecting all electrical connections from DG set alternator of any capacity from base plate by opening nuts & bolts keeping aside the alternator for inspection and taking out to work shop for rewinding including testing and commissioning etc. complete all as specified and as directed.
M & L for rewinding of alternator field coil with super enamelled copper winding wire of class 'F' insullation as per existing size and gauge including heating, varnishing and testing for capacity 10 KVA DG set to 20 KVA DG set, etc. complete all as specified and as directed.
All as per serial item No.185 here-in-before but for capacity 30 KVA DG set to 62.5 KVA DG set, etc. complete all as specified and as directed.
All as per serial item No.185 here-in-before but for capacity 100 KVA DG set to 125 KVA DG set, etc. complete all as specified and as directed.
All as per serial itemNo.185 here-in-before but for capacity 150 KVA DG set to 200 KVA DG set, etc. complete all as specified and as directed.
All as per serial item No.185 here-in-before but for capacity 250 KVA DG set to 380 KVA DG set, etc. complete all as specified and as directed.
All as per serial item No.185 here-in-before but for capacity 400 KVA DG set to 500 KVA DG set, etc. complete all as specified and as directed.
All as per serial item No.185 here-in-before but for capacity 625 KVA DG set to 750 KVA DG set, etc. complete all as specified and as directed.
Material and labour for water temperature guage including sensor and cable complete as per sample including removal of existing unserviceable one complete all as specified and as directed.
Material and labour for dismantaling the radiator and taking to work shop for overhauling & cleaning, de-scaling with alkaline based chemical , removal of leakage including soldering and welding, brazing as required and renewal of gaskets, nuts, bolts, mounting pads,hoses,clips, etc and refixing its original position for capacity of 15 KVA to 30 KVA DG set complete all as specified and as directed
All as per serial item No.193 here-in-before but for capacity 50 KVA DG set to 62.5 KVA DG set, etc. complete all as specified and as directed.
All as per serial item No.193 here-in-before but for capacity 100 KVA DG set to 125 KVA DG set, etc. complete all as specified and as directed.
All as per serial item No.193 here-in-before but for capacity 150 KVA DG set to 200 KVA DG set, etc. complete all as specified and as directed.
All as per serial item No.193 here-in-before but for capacity 250 KVA DG set to 380 KVA DG set, etc. complete all as specified and as directed.
All as per serial item No.193 here-in-before but for capacity 400 KVA DG set to 500 KVA DG set, etc. complete all as specified and as directed.
All as per serial item No.193 here-in-before but for capacity 625 KVA DG set to 750 KVA DG set, etc. complete all as specified and as directed.
Material and labour for repair and calibration of FIP and injectors from repairs to make the FIP functional as per standard calibration procedure and norms including replacement of minor spares, gasket etc for smooth functioning of FIP and refixing its original position including testing at site for capacity 10 KVA to 20.00 KVA DG set etc. complete all as specified and as directed.
All as per serial item No.200 here-in-before but for capacity 30 KVA DG set to 50 KVA DG set, etc. complete all as specified and as directed.
All as per serial item No. 200 here-in-before but for capacity 62.5 KVA DG set to 125 KVA DG set, v
All as per serial item No.200 here-in-before but for capacity 150 KVA DG set to 200 KVA DG set, etc. complete all as specified and as directed.
All as per serial item No.200 here-in-before but for capacity 250 KVA DG set to 380 KVA DG set, etc. complete all as specified and as directed.
All as per serial item No.200 here-in-before but for capacity 400 KVA DG set to 625 KVA DG set, etc. complete all as specified and as directed.
Material and labour for engine complete overhauling of DG set capacity 15 KVA to capacity 30 KVA of Kirloskar/ Crompton Greaves makes by opening the top cover complete including dismatling the engine head, cylinder liner and piston assembly, crank shaft assembly, radiator fan belt and radiator fan, gear assembly complete removing of engine side for repair/ replacement of parts i.e gasket, washer, 'O' ring all types etc including grinding polishing of crank shaft , head repairing and overhauling valve seat cutting and replacing, valve tapping, head assemble and testing of DG set after necessary repair with and authorised dealer fix at site reassembling of DG set and testing on full load upto entire satisfaction of Engineer in Charge complete all as directed Note : Spare parts will be measured and paid seperately under relevent items.
Supply only the following spare parts of existing make and capacity and should be compactable & suitable for 15-30 KVA DG Set, complete all as directed by Engr-in-Charge:- (a). Piston assembly
(b). Piston ring set
(c). Full engine gasket
(d). Main bearing set
(e). Main cylinder liner
(f). Main cylinder head copper sleeves
(g). Lock nut
(h). Big end bearing
(j). Timing belt
(k). Benjo bolt
(l). Timing belt tension adjuster
(m). Inlet valve
(n). Exhaust valve
(o). Head gasket
(p). Oil pump assembly
(q). Thrust washer
(r). Crank case gasket
(s). Head nozzle plug set
Material and labour for engine complete overhauling of DG set capacity 62.50 KVA to capacity 110 KVA of Kirloskar/ Crompton Greaves makes by opening the top cover complete including dismatling the engine head, cylinder liner and piston assembly, crank shaft assembly, radiator fan belt and radiator fan, gear assembly complete removing of engine side for repair/ replacement of parts i.e gasket, washer, 'O' ring all types etc including grinding polishing of crank shaft , head repairing and overhauling valve seat cutting and replacing, valve tapping, head assemble and testing of DG set after necessary repair with and authorised dealer fix at site reassembling of DG set and testing on full load upto entire satisfaction of Engineer in Charge complete all as directed (Note : Spare parts will be measured and paid seperately under relevent items)
Supply only the following spare parts of existing make and capacity and should be compactable & suitable for 62.5 KVA DG Set, complete all as directed by Engr-in-Charge:- (a). Piston assembly
(b). Piston ring set
(c). Full engine gasket
(d). Main bearing set
(e). Main cylinder liner
(f). Main cylinder head copper sleeves
(g). Lock nut
(h). Big end bearing
(j). Timing belt
(k). Benjo bolt
(l). Timing belt tension adjuster
(m). Inlet valve
(n). Exhaust valve
(o). Head gasket
(p). Oil pump assembly
(q). Thrust washer
(r). Crank case gasket
(s). Head nozzle plug set
Material and labour for engine complete overhauling of DG set capacity 125 KVA to capacity 200 KVA of Kirloskar/ Crompton Greaves makes by opening the top cover complete including dismatling the engine head, cylinder liner and piston assembly, crank shaft assembly, radiator fan belt and radiator fan, gear assembly complete removing of engine side for repair/ replacement of parts i.e gasket, washer, 'O' ring all types etc including grinding polishing of crank shaft , head repairing and overhauling valve seat cutting and replacing, valve tapping, head assemble and testing of DG set after necessary repair with and authorised dealer fix at site reassembling of DG set and testing on full load upto entire satisfaction of Engineer in Charge complete all as directed (Note : Spare parts will be measured and paid seperately under relevent items)
Supply only the following spare parts of existing make and capacity and should be compactable & suitable for 200 KVA DG Set, complete all as directed by Engr-in-Charge:- (a). Piston assembly
(b). Piston ring set
(c). Full engine gasket
(d). Main bearing set
(e). Main cylinder liner
(f). Main cylinder head copper sleeves
(g). Lock nut
(h). Big end bearing
(j). Timing belt
(k). Benjo bolt
(l). Timing belt tension adjuster
(m). Inlet valve
(n). Exhaust valve
(o). Head gasket
(p). Oil pump assembly
(q). Thrust washer
(r). Crank case gasket
(s). Head nozzle plug set
Material and labour for engine complete overhauling of DG set capacity 250 KVA to capacity 500 KVA of Kirloskar/ Crompton Greaves makes by opening the top cover complete including dismatling the engine head, cylinder liner and piston assembly, crank shaft assembly, radiator fan belt and radiator fan, gear assembly complete removing of engine side for repair/ replacement of parts i.e gasket, washer, 'O' ring all types etc including grinding polishing of crank shaft , head repairing and overhauling valve seat cutting and replacing, valve tapping, head assemble and testing of DG set after necessary repair with and authorised dealer fix at site reassembling of DG set and testing on full load upto entire satisfaction of Engineer in Charge complete all as directed (Note : Spare parts will be measured and paid seperately under relevent items)
Supply only the following spare parts of existing make and capacity and should be compactable & suitable for 500 KVA DG Set, complete all as directed by Engr-in-Charge:- (a). Piston assembly
(b). Piston ring set
(c). Full engine gasket
(d). Main bearing set
(e). Main cylinder liner
(f). Main cylinder head copper sleeves
(g). Lock nut
(h). Big end bearing
(j). Timing belt
(k). Benjo bolt
(l). Timing belt tension adjuster
(m). Inlet valve
(n). Exhaust valve
(o). Head gasket
(p). Oil pump assembly
(q). Thrust washer
(r). Crank case gasket
(s). Head nozzle plug set
Supply & fixing in repair of Contactor- 3 Pole, 225 Amp/ 200 Amp for 62.5 to 150 KVA DG set AMF panel with replacement of lugs and checking of all connections etc including taking down on old unserviceable contactor complete all as specified and directed.
Supply & fixing in repair of Contactor of 3 Pole, 250 Amps AMF PANEL of DG Set with replacement of cable lugs and checking of all connections etcetc including taking down on old unserviceable contactor complete all as specified and directed.
Supply & fixing in repair of Contactor of 3 Pole, 400 Amps for AMF PANEL of DG Set with replacement of cable lugs and checking of all connections etc etc including taking down on old unserviceable contactor complete all as specified and directed.
Material and labour for repair/ overhauling of self starting system of DG set including replacement of carbon brushes, bearings, bushes, rewinding of armature and field coil etc and varnishing of capacity 24 volts with necessary connections incluing testing and commissioing complete all as specified and as directed.
Material and labour for repair/ overhauling of self starting system of DG set including replacement of carbon brushes, bearings, bushes, rewinding of armature and field coil etc and varnishing of capacity 12 volts with necessary connections incluing testing and commissioing complete all as specified and as directed.
M & L for fabrication / Jointing / welding work to repair DG set door of Capacity 15-200 KVA including repairing of hinges,doors, clamp,handle,angle iron, nut bolts & replacement lock with existing type and size complete all as directed
M & L for fabrication/Jointing/welding work to repair DG set door of Capacity 200-625 KVA including repairing of hinges,doors, clamp,handle,angle iron,nut bolts & replacement lock with existing type and size complete all as directed
M&L for spray painting to DG set canopy of capacity 15-200 KVA by cleaning the existing old paint with the help of mechanical tools such as wire brush, scraper and sand paper from the surface of DG set canopy and painting the prepared surface with two coats of synthatic enamel paint of approved shade over a coat of red oxide primer complete all as specified and specified.
M&L for spray painting to DG set canopy of capacity 250-625 KVA by cleaning the existing old paint with the help of mechanical tools such as wire brush, scraper and sand paper from the surface of DG set canopy and painting the prepared surface with two coat of synthatic enamel paint of approved shade over a coat of red oxide primer complete all as specified and specified.
Supply and fix microprocessor based multifunction controller with necessary accessories complete suitable for DG sets operation of capacity 15-30 KVA and showing the various parameters such as volt, ampere, frequency, RPM etc complete as per manufacturer of DG set with site requirment including removal of existing unserviceable one complete all as specified and as directed.
Supply and fix microprocessor based multifunction controller with necessary accessories complete suitable for DG sets operation of capacity 62.5-110 KVA and showing the various parameters such as volt, ampere, frequency, RPM etc complete as per manufacturer of DG set with site requirment including removal of existing unserviceable one complete all as specified and as directed.
Supply and fix microprocessor based multifunction controller with necessary accessories complete suitable for DG sets operation of capacity 125-180 KVA and showing the various parameters such as volt, ampere, frequency, RPM etc complete as per manufacturer of DG set with site requirment including removal of existing unserviceable one complete all as specified and as directed.
Supply and fix microprocessor based multifunction controller with necessary accessories complete suitable for DG sets operation of capacity 200-320 KVA and showing the various parameters such as volt, ampere, frequency, RPM etc complete as per manufacturer of DG set with site requirment including removal of existing unserviceable one complete all as specified and as directed.
Supply and fix microprocessor based multifunction controller with necessary accessories complete suitable for DG sets operation of capacity 400 KVA and showing the various parameters such as volt, ampere, frequency, RPM etc complete as per manufacturer of DG set with site requirment including removal of existing unserviceable one complete all as specified and as directed.
Supply and fix microprocessor based multifunction controller with necessary accessories complete suitable for DG sets operation of capacity 500 KVA and showing the various parameters such as volt, ampere, frequency, RPM etc complete as per manufacturer of DG set with site requirment including removal of existing unserviceable one complete all as specified and as directed.
Supply and fix microprocessor based multifunction controller with necessary accessories complete suitable for DG sets operation of capacity 625 KVA and showing the various parameters such as volt, ampere, frequency, RPM etc complete as per manufacturer of DG set with site requirment including removal of existing unserviceable one complete all as specified and directed.
Material and labour for SMPS (system main power supply) type control unit assembly suitable for 24 volts battery charger for including removal of existing unserviceable one compete all as specified and directed .
Supply and fix for battery low maintenance lead acid of capacity 12 volts 180 AH with initial charging including removal of existing unserviceable one and hand over to store yard compete all as specified and directed.
Supply and fix for battery low maintenance lead acid of capacity 12 volts 150 AH with initial charging including removal of existing unserviceable one and hand over to store yard compete all as specified and directed.
Supply and fix for battery low maintenance lead acid of capacity 12 volts 135 AH with initial charging including removal of exsting unserviceable one and hand over to store yard compete all as specified and directed.
Supply and fix for battery low maintenance lead acid of capacity 12 volts 100 AH with initial charging including removal of extg unserviceable one and hand over to store yard compete all as specified and directed by Engr-in charge.
Material and labour for carrying out repairs to AMF panel of 15 KVA to 200 KVA DG set at various installation inclduing study, tracing out circuit, testing, replacing all defective parts, rewinding existing power and control wiring with same cables including testing and commissioning etc. complete all as specified and as directed by Engr-in-Charge. Note: Spares parts like Volt meter, CT, power contactor required for repair will be measured and paid seperately under relevant items.
Material and labour for carrying out repairs to AMF panel of 250 KVA to 625 KVA DG set at various installation inclduing study, tracing out circuit, testing, replacing all defective parts, rewinding existing power and control wiring with same cables including testing and commissioning etc. complete all as specified and as directed by Engr-in-Charge. Note: Spares like Volt meter, CT, power contactor required for repair will be measured and paid seperately under relevant items.
Supply only for digital type frequency meter 96 x 96 mm flush/ square pattern compete all as specified & directed.
Supply only for LED indicator lamps R, Y, B with holder 15 mm screw type compete all as specified & directed.
Supply only for CT cast resin type of ratio 400/5 Amps of suitable VA burden compete all as specified & directed.
Supply only for CT cast resin type of ratio 200/5 Amps of suitable VA burden compete all as specified & directed.
Supply and fix for CT cast resin type of ratio 100/5 Amps of suitable VA burden including removal of existing unserviceable one compete all as specified & directed.
Supply and fix 3 phase voltage monitoring relay DIN rail of suitable VA burden including removal of existing unserviceable one compete all as specified & directed.
Supply & filling of Engine oil, multi grade premium Genuine oil 15W/ 40 as per manufacturer recommendations in DG sets compete all as specified & directed.
Supply and applying for petrolium Jelly (01 Kg plastic sealed container) complete all as specified and as directed.
Supply and fill for distilled water for topping up in lead acid batteries and radiator complete all as specified and as directed.
Supply and fill for electrolyte of suitable specific gravity for lead acid batteries in sealed container complete all as specified and as directed.
Supply and fill for genuine coolant in 5 litres plastic sealed container for topping up in Radiator of DG set located at different locations complete all as specified and as directed.
Material and labour for battery leads of PVC insulated, multistranded, copper conductor of size 50 Sqmm of 1.25 metres long each duly fixed with brass clamps, copper lugs suitable for DG set batteries installed at different locations including removal of existing unserviceable one complete all as specified and as directed.
Material and labour for battery teriminal brass clamps including removal of existing unserviceable one compete all as specified and as directed.
Supply & fix in repair of AVR suitable for following capacity of DG Sets & complete all as specified and directed for following capacity:- (a) Up to 50 KVA DG set
(b)62.5 to 125 KVA DG set
(c)160 to 320 KVA DG set
(d)400 to 625 KVA DG Set
S&F of MCCB, 160 Amps, adjustable type, 4 pole, 415 volt, 16 kA breaking capacity with adjustable over load, short circuit, ground fault (4 pole) & fixed instantanous neutral protection (4 pole), conforming to IS/IEC-60947-2 with spreader terminal kit including taking down of old unserviceable MCCB complete all as specified and directed.
S&F of MCCB, 250 Amps, adjustable type, 4 pole, 415 volt, 35 kA breaking capacity with adjustable over load, short circuit, ground fault (4 pole) & fixed instantanous neutral protection (4 pole), conforming to IS/IEC-60947-2 with spreader terminal kit including taking down of old unserviceable MCCB complete all as specified and directed.
S&F of MCCB, 400 Amps, adjustable type, 4 pole, 415 volt, 50 kA breaking capacity with adjustable over load, short circuit, ground fault (4 pole) & fixed instantanous neutral protection (4 pole), conforming to IS/IEC-60947-2 with spreader terminal kit including taking down of old unserviceable MCCB complete all as specified and directed.
Supply & fixing in repair of Contactor- 3/4 Pole,150 Amps/ 140 Amps suitable for up to 62.5 KVA DG Set AMF panel with replacement of lugs and checking of all connections etc including taking down unserviceable contactor complete all as specified and directed.
Supply & fixing in repair of Contactor- 3/4 Pole, 225 Amp/ 200 Amp suitable for 62.5 to 150 KVA DG set AMF panel with replacement of lugs and checking of all connections etc taking down unserviceable contactor complete all as specified and directed.
Supply & fixing in repair of Contactor of 4 Pole, 250 Amps AMF PANEL of DG Set with replacement of cable lugs and checking of all connections etc taking down unserviceable contactor complete all as specified and directed.
Supply & fixing in repair of Contactor of 4 Pole, 320 Amps for AMF PANEL of DG Set with replacement of cable lugs and checking of all connections etc taking down unserviceable contactor complete all as specified and directed.
Supply & fixing in repair of Contactor of 4 Pole, 400 Amps for AMF PANEL of DG Set with replacement of cable lugs and checking of all connections etc taking down unserviceable contactor complete all as specified and directed.
Supply & fixing in repair of Self Engine Stop Relay Device suitable for 63 KVA to 180 KVA DG set AMF panel etc complete all as directed and specified
Supply & fixing in repair of Self Engine Stop Relay Device suitable for 200 KVA to 315 KVA DG set AMF panel etc complete all as directed and specified
Supply & fixing in repair of Self Engine Stop Relay Device suitable for 400 KVA to 625 KVA DG set AMF panel etc complete all as directed and specified
Please Enable Macros to View BoQ information
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.66 MB
8275TenderDocs.pdf
Tender Documents • 0.96 MB
BOQ_846951.xls
BOQ • 0.83 MB
Download all tender documents and submit your bid