Hardialeana

Amount

5.2 (i)/Carriage of Material Jallalabad Sand Lead upto 80 km 0 km to 80 km

5.2 (i)/Carriage of Material Pathankot Sand Lead upto 250 km 0 km to 250 km

5.2 + 4.1 A/Earth,Surkhi, Sand, Earth, Fly Ash, Bajri with Stone (building or pitching) Sand, Shingle, Spalls, Brick bats, Brick ballast and Stone metal. Lead upto 0.5 km to 1.00 km

8.5 (b)/Dismantling brick work tile masonary or tile lining.

15.6 - 15.3/Extra for additional 4mm thick cement plaster in 1:5 on LPDE film on side slope and bed.

15.66/Cement pointing 1:2 flush on flat brick flooring

16.07/Distempering with dry distemper of approved manufacture two or more coats over one priming coat to give an even shade

16.14/Finishing walls with water soluable exterior paint such as snowecem, robbiacem etc. on old work one coat to give an even shade.

19.2/Dressing side slopes and preparation of sub grade for lining.

19.16/Extra allowence for scaffolding for side slopes only

24.5(b) (i)/Compaction :- Extra for laying earth/fly ash as per specifications for compaction in 20 cm layers and dressing but excluding cost of rolling.

(b) (ii)/Extra for watering the earth/fly ash laid in 20 cm layers as per specifications for compaction.

(b) (iii)/Extra for rolling to specifications.

28.2+ 28.13+ 28.18/Providing, Laying , fixing & jointing of P.V.C. Pipes including special as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications including specials, excavation by Mechanical means and refilling in origional condition. PVC 6kg/cm2 (xii)/63mm o/d pipe of 6 Kgf. / sqcm

(xiv)/90mm o/d pipe of 6 Kgf. / sqcm

28.27 A/Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge). (a)/80mm i/d Sluice Valves flanged

(b)/100mm i/d Sluice Valves flanged

28.31/Proving & fixing ISI Marked Non-return valves flanged end class PN-1.0 as per IS:5312/2004 in pipe lines including jointing & cost of Nut Bolt , rubber insertion etc. complete. Note: If Non-return valves class PN-1.6 is used instead of class PN-1.0 , than 5% will be paid extra. A/Class PN-1.0 as per ISI with rubber Flap (a)/100mm i/d Non-return valve

28.51/Providing and placing in horizontal layers filtering media screened, washed and cleaned as described below :- (a)/Top layer :----- Fine sand screened, cleaned and washed and graded (effective size 0.2 to 0.4mm with uniformity coefficient 2.00 to 3.00) from Pathankot or other approved source.

(b)/Second Layer :- Coarse sand screened, cleaned and washed and graded from 3mm to 6mm (from Pathankot or approved equivalent quarry).

(c)/Third Layer :- Bajri screened, cleaned and washed and graded from 6mm to 20mm (from Pathankot or approved equivalent quarry).

(d)/Fourth Layer :- Bajri (Coarse) screened, cleaned and washed and graded from 20mm to 25mm (from Pathankot or approved equivalent quarry)

(e)/Bottom Layer :- Broken stone, screened, cleaned and washed and graded from 50mm to 75mm (from Pathankot or approved equivalent quarry)

28.66/Construction of masonary Sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public health department. (a)/Size 0.60 m. x 0.60 m.

29.27/First class flat brick paving or flooring laid over and in cement sand mortar 1:5 in ordinary bonded courses or in herring bone or other special courses, to templates, over dressed foundation and to correct longitudinal and cross slopes as shall be required by the Engineer-in-charge. All joints shall be filled with mortar and struck flushed as the work proceeds.

28.36/Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS 1239) B- Class,premium make such as (Jindal Hisar) including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete. (For Charge Line) (e)/40mm i/d

28.43/Providing, fixing and jointing ISI Marked Gun-Metal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete. (e)/40mm i/d Gun Metal peet valve heavy pattern.

NS/Cleaning of Silt from Inlet Channal Pipe Line with compressor

NS/Providing and placing LDPE Film 250 micron on side slope and in bed including overlapping over 25mm thick mud plaster.

NS/Taking out filter media 1st to 5th layer & plasing the same into filter beds ofter washing, screaning & cleaning complete in all respect. (a)/Top Layer

NS/Repair of Sand Washing Plateform

NS/Repair of Raw Water Motor and Pump set of 3.00 BHP

NS/Repair of Clear Water Motor and Pump set of 7.50 BHP

NS/Repair of Control Pannel including Wiring, Main Switch, meter etc. including labour charges.

NS/Providing, fixing & jointing water connection in MDPE pipe (inside ground) and G.I. pipe (outsaide Ground) line 15mm i/d including cutting and threading pipe and making long screw etc. complete including cost of Orifice Type Innovative GI Union, PVC/Metalled 15mm i/d Tap, Nipple, Elbow, clump etc. complete in all respect. (On New Pipe Line)

NS/Providing, fixing & jointing water connection in MDPE pipe (inside ground) and G.I. pipe (outsaide Ground) line 15mm i/d including cutting and threading pipe and making long screw etc. complete including cost of Orifice Type Innovative GI Union, PVC/Metalled 15mm i/d Tap, Nipple, Elbow, clump etc. complete in all respect. (On Existing Pipe Line)

NS/Repair of Existing House Hold Connections with Providing, fixing & jointing Orifice Type Innovative GI Union complete in all respect. (On Existing Water Connections)

NS/Providing, installing, testing & commissioning one no. Electronically actuated, diaphragm operated, Metering system, chemical dosing Chlorinator, suitable for delivering 0.5 to 0.6 litres of bleaching powder solution/ sodium hypo solution per hour under maximum delivery pressure upto 7 kgcm^2 and suction lift not less than 1.5m as per DWSS standard Specification. (Make Milton roy)

NS/Provision for Painting on Sign Board

NS/Credit of Old Sluice Valves in Filter Beds.(Rates to be submitted in (-)