Repair and maintenance work of Siddharth Vihar International Hostel, B.H.U.

Select, At Par, Excess (+), Less (-) IOCL

Tender Inviting Authority: SUPERINTENDING ENGINEER, U.W.D., B.H.U.

Name of Work:- Repair and maintenance work of Siddharth Vihar International Hostel, B.H.U.

Tender Reference No.:- UWD/2025/18112025-1

Sl. No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT In Figures TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words

0.00;[Re31]0.00 Excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia (2.10.1.2) Metre Excess(+) Full Conversion INR

0.00;[Re1]0.00 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) (4.1.5) cum Excess(+) Full Conversion INR INR Eight Thousand Five Hundred & Seventeen and Paise Twenty Nine Only

0.00;[Re2]0.00 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (8.31) sqm Excess(+) Full Conversion INR INR Eighty One Thousand Four Hundred & Twenty Five and Paise Fifty Two Only

0.00;[Re3]0.00 Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). (10.13.1) K.G. Excess(+) Full Conversion INR INR Twenty Three Thousand One Hundred & Sixty Two and Paise Sixteen Only

0.00;[Re4]0.00 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws (9.21.2) sqm Excess(+) Full Conversion INR INR Twelve Thousand Six Hundred & Eighty and Paise Seventy Only

0.00;[Re5]0.00 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). (9.23) sqm Excess(+) Full Conversion INR INR Nine Thousand Two Hundred & Twenty Two and Paise Thirty Four Only

0.00;[Re6]0.00 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm (9.96.2) Each Excess(+) Full Conversion INR INR One Thousand &Fourteen and Paise Twenty Four Only

0.00;[Re7]0.00 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 200x10 mm (9.97.3) Each Excess(+) Full Conversion INR INR Three Hundred & Eighty Eight and Paise Four Only

0.00;[Re8]0.00 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 150x10 mm (9.97.4) Each Excess(+) Full Conversion INR INR Three Hundred & Twenty One and Paise Twenty Eight Only

0.00;[Re9]0.00 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 100 mm (9.100.2) Each Excess(+) Full Conversion INR INR Four Hundred & Sixty Three and Paise Fifty Two Only

0.00;[Re10]0.00 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. (11.39) sqm Excess(+) Full Conversion INR INR Twenty Thousand Seven Hundred & Five and Paise Forty Four Only

0.00;[Re11]0.00 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) (13.4.2) sqm Excess(+) Full Conversion INR INR Eighty Five Thousand Nine Hundred & Thirty Three and Paise Nine Only

0.00;[Re12]0.00 Applying priming coat: With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood (13.50.2) sqm Excess(+) Full Conversion INR INR Five Thousand &Eighty Four and Paise Ten Only

0.00;[Re13]0.00 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture (13.62.1) Sqm Excess(+) Full Conversion INR INR Fifteen Thousand Four Hundred & Nine and Paise Eighty Only

0.00;[Re14]0.00 Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge. (14.82) Each Excess(+) Full Conversion INR INR Three Hundred & Ninety One and Paise Forty Four Only

0.00;[Re15]0.00 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) (15.2.1) cum Excess(+) Full Conversion INR INR Thirty Eight Thousand Three Hundred & Seventy and Paise Nineteen Only

0.00;[Re16]0.00 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below (15.12.1) Each Excess(+) Full Conversion INR INR Four Thousand Two Hundred & Eighty Seven and Paise Forty Eight Only

0.00;[Re17]0.00 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below (15.13.1) Each Excess(+) Full Conversion INR INR Six Hundred & Ninety Eight and Paise Fifteen Only

0.00;[Re18]0.00 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm (15.23.1) sqm Excess(+) Full Conversion INR INR One Thousand One Hundred & Forty Two and Paise Seventy Two Only

0.00;[Re19]0.00 Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. (15.52) Each Excess(+) Full Conversion INR INR Three Hundred & Twenty Seven and Paise Six Only

0.00;[Re20]0.00 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. (15.56) sqm Excess(+) Full Conversion INR INR Thirteen Thousand Six Hundred & Sixty Four and Paise Sixty Nine Only

0.00;[Re21]0.00 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. (15.60) cum Excess(+) Full Conversion INR INR Six Thousand One Hundred & Twelve and Paise Thirty Two Only

0.00;[Re22]0.00 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests (17.1.1) Each Excess(+) Full Conversion INR INR Six Thousand Five Hundred & Eighty Four and Paise Sixty Eight Only

0.00;[Re23]0.00 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid (17.2.1) Each Excess(+) Full Conversion INR INR Twelve Thousand Six Hundred & Seventy Nine and Paise Twenty Six Only

0.00;[Re24]0.00 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap (17.7.2) Each Excess(+) Full Conversion INR INR Eight Thousand Six Hundred & Sixty Four and Paise Ninety Six Only

0.00;[Re25]0.00 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe: 32 mm dia (17.28.1.1) Each Excess(+) Full Conversion INR INR Four Hundred & Four and Paise Thirty Six Only

0.00;[Re26]0.00 Providing and fixing 100 mm sand cast Iron grating for gully trap. (17.29) Each Excess(+) Full Conversion INR INR Three Hundred & Ten and Paise Eighty Six Only

0.00;[Re27]0.00 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm (17.32.2) Each Excess(+) Full Conversion INR INR Five Thousand Three Hundred and Paise Twelve Only

0.00;[Re28]0.00 Providing and fixing soil, waste and vent pipes : 100 mm dia: Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 (17.35.1.2) Metre Excess(+) Full Conversion INR INR Twenty Eight Thousand Seven Hundred & Twenty One and Paise Seventy Five Only

0.00;[Re29]0.00 Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes : 100 mm dia pipe (17.36.2) Each Excess(+) Full Conversion INR INR One Hundred & Ninety Two and Paise Eighty Only

0.00;[Re30]0.00 Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. : For 100 mm dia pipe (17.37.1) Each Excess(+) Full Conversion INR INR One Thousand Four Hundred & Twelve and Paise Twenty Only

0.00;[Re31]0.00 Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.:100 mm dia: Sand cast iron S&S as per IS - 3989 (17.38.1.2) Each Excess(+) Full Conversion INR INR One Thousand Three Hundred & Seventy Two and Paise Thirty Two Only

0.00;[Re1]0.00 Providing and fixing plain bend of required degree. 100 mm dia: Sand cast iron S&S as per IS : 3989 (17.39.1.2) Each Excess(+) Full Conversion INR INR One Thousand Six Hundred & Sixty Three and Paise Ninety Eight Only

0.00;[Re2]0.00 Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.:100x100x100 mm: Sand cast iron S&S as per IS - 3989 (17.43.1.2) Each Excess(+) Full Conversion INR INR Nine Hundred and Paise Seventy One Only

0.00;[Re3]0.00 Providing and fixing single equal plain junction of required degree: 100x100x100 mm: Sand cast iron S&S as per IS - 3989 (17.44.1.2) Each Excess(+) Full Conversion INR INR One Thousand Five Hundred & Seventy Nine and Paise Ninety Six Only

0.00;[Re4]0.00 Providing and fixing terminal guard :100 mm: Sand cast iron S&S as per IS - 3989 (17.56.1.2) Each Excess(+) Full Conversion INR INR One Thousand Four Hundred & Seventy Seven and Paise Two Only

0.00;[Re5]0.00 Providing and fixing collar : 100 mm: Sand cast iron S&S as per IS - 3989 (17.57.1.2) Each Excess(+) Full Conversion INR INR Nine Hundred & Ninety Eight and Paise Fifty Eight Only

0.00;[Re6]0.00 Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter :100 mm (17.58.1) Each Excess(+) Full Conversion INR INR Eleven Thousand Five Hundred & Eight and Paise Eleven Only

0.00;[Re7]0.00 Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter : 100 mm (17.59.1) Each Excess(+) Full Conversion INR INR Five Hundred & Forty Three and Paise Seventy Two Only

0.00;[Re8]0.00 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 100 mm outlet Sand cast iron S&S as per IS: 3989 (17.60.1.1) Each Excess(+) Full Conversion INR INR Eleven Thousand Six Hundred & Fifty Five and Paise Fifty Four Only

0.00;[Re9]0.00 Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) : 100 mm dia (17.61.1) Metre Excess(+) Full Conversion INR INR Two Thousand &Eighty One and Paise Eighty Two Only

0.00;[Re10]0.00 Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work : 100 mm diameter pipe (17.65.1) Metre Excess(+) Full Conversion INR INR Two Thousand &Fourteen Only

0.00;[Re11]0.00 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. (17.71) Each Excess(+) Full Conversion INR INR Six Hundred & Fifty Five and Paise Twenty Only

0.00;[Re12]0.00 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. (17.72) Each Excess(+) Full Conversion INR INR Nine Hundred & Two and Paise Seventy Six Only

0.00;[Re13]0.00 Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms. (17.74) Each Excess(+) Full Conversion INR INR Two Thousand Seven Hundred & Seventy Five and Paise Seventy Six Only

0.00;[Re14]0.00 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.Internal work - Exposed on wall : 20 mm dia nominal bore (18.10.2) Metre Excess(+) Full Conversion INR INR Four Thousand Two Hundred & Fifty Four and Paise Ninety Only

0.00;[Re15]0.00 Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 15 mm dia nominal bore (18.11.1) Metre Excess(+) Full Conversion INR INR Fifteen Thousand Eight Hundred & Thirteen and Paise Eighty Four Only

0.00;[Re16]0.00 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore (18.52.1) Each Excess(+) Full Conversion INR INR Three Thousand Two Hundred & Sixty One and Paise Seventy Five Only

0.00;[Re17]0.00 Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length: 15 mm nominal bore (18.21.2.1) Each Excess(+) Full Conversion INR INR One Thousand One Hundred & Forty One and Paise Thirty Two Only

0.00;[Re18]0.00 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter (18.22.2) Each Excess(+) Full Conversion INR INR Eight Hundred & Sixty Five and Paise Forty Only

0.00;[Re19]0.00 Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work : 20 mm diameter pipe (18.38.2) Metre Excess(+) Full Conversion INR INR Two Hundred & Twenty Six and Paise Twenty Only

0.00;[Re20]0.00 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 15 mm nominal bore (18.46.1) Each Excess(+) Full Conversion INR INR Six Hundred & Nineteen and Paise Fifty Only

0.00;[Re21]0.00 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 20 mm nominal bore (18.46.2) Each Excess(+) Full Conversion INR INR Six Hundred & Seventy Four and Paise Eighty Eight Only

0.00;[Re22]0.00 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore (18.49.1) Each Excess(+) Full Conversion INR INR One Thousand Four Hundred & Seventy Nine and Paise Thirty Six Only

0.00;[Re23]0.00 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.: 15 mm nominal bore (18.51.1) Each Excess(+) Full Conversion INR INR One Thousand Five Hundred & Fifty Four and Paise Seventy Six Only

0.00;[Re24]0.00 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore (18.53.1) Each Excess(+) Full Conversion INR INR Six Thousand Seven Hundred & Five and Paise Forty Eight Only

0.00;[Re25]0.00 Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. (18.53A) Each Excess(+) Full Conversion INR INR Two Hundred & Ninety One and Paise Twelve Only

0.00;[Re26]0.00 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. (18.65) Each Excess(+) Full Conversion INR INR Four Hundred & Thirty Three and Paise Seventy Six Only

0.00;[Re27]0.00 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 150 mm diameter (19.1.2) Metre Excess(+) Full Conversion INR INR Six Thousand Seven Hundred & Seventy and Paise Ten Only

0.00;[Re28]0.00 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design : 150 mm diameter S.W. pipe (19.3.2) Metre Excess(+) Full Conversion INR INR Seven Thousand Two Hundred & Thirty and Paise Forty Only

0.00;[Re1]0.00 Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : For pipes 100 to 250 mm diameter (19.21.1) Each Excess(+) Full Conversion INR INR One Thousand Five Hundred & Seventy Seven and Paise Fourteen Only

0.00;[Re2]0.00 Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (19.27.1) Each Excess(+) Full Conversion INR INR Eleven Thousand Five Hundred & Ninety Four and Paise Eight Only

0.00;[Re3]0.00 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (19.30.1.1) Each Excess(+) Full Conversion INR INR Six Thousand Seven Hundred & Fifty and Paise Fifty Eight Only

0.00;[Re4]0.00 Extra for depth beyond 45 cm of brick masonry chamber : For 455x610 mm size: With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (19.31.1.1) Metre Excess(+) Full Conversion INR INR Two Thousand Nine Hundred & Seventy Five and Paise Ninety Two Only

0.00;[Re5]0.00 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. (22.5) sqm Excess(+) Full Conversion INR

0.00;[Re6]0.00 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws (9.21.1) sqm Excess(+) Full Conversion INR INR Thirty Three Thousand Seven Hundred & Fifty Six and Paise Seventy Three Only

0.00;[Re7]0.00 Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws : 35 mm thick shutters Kiln seasoned selected class of sheesham wood (9.134.1.2.3) sqm Excess(+) Full Conversion INR INR Sixty Six Thousand Eight Hundred & Seventy Eight and Paise Fifty Only

0.00;[Re8]0.00 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (Copper oxidised as per IS 1378): 250x16 mm (9.62.2) Each Excess(+) Full Conversion INR INR Two Thousand Six Hundred & Thirty Eight and Paise Fifty Eight Only

0.00;[Re9]0.00 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378): 200x10 mm (9.63.2) Each Excess(+) Full Conversion INR INR Nine Hundred & Forty Five and Paise Forty Two Only

0.00;[Re10]0.00 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378) : 150x10 mm (9.63.3) Each Excess(+) Full Conversion INR INR Eight Hundred & Nine and Paise Seventy Six Only

0.00;[Re11]0.00 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378): 125 mm (9.66.1) Each Excess(+) Full Conversion INR INR One Thousand &Eighty Eight and Paise Thirty Six Only

0.00;[Re12]0.00 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.: Twin rubber stopper (9.101.2) Each Excess(+) Full Conversion INR INR Nine Hundred & Eighty Five and Paise Sixty Only

0.00;[Re13]0.00 Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. With 2nd class teak wood beading 62X19 mm (9.135.1) sqm Excess(+) Full Conversion INR INR One Lakh Five Thousand Six Hundred & Seventy Four and Paise Four Only

0.00;[Re14]0.00 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete (13.88) Sqm Excess(+) Full Conversion INR INR Eleven Thousand Five Hundred & Thirty Two Only

0.00;[Re15]0.00 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work (13.99.1) sqm Excess(+) Full Conversion INR INR Thirty Four Thousand Five Hundred & Six and Paise Ninety Only

0.00;[Re16]0.00 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1cement: 4 coarse sand) (14.1.2) sqm Excess(+) Full Conversion INR INR Fifty Four Thousand Five Hundred & Thirty Seven Only

0.00;[Re17]0.00 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) (14.5.1) Sqm Excess(+) Full Conversion INR INR Ten Thousand Six Hundred & Twelve Only

0.00;[Re18]0.00 Providing and fixing 25 mm thick shutters for cup board etc. : Panelled or panelled & glazed shutters : Ist class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. (14.26.1.2) sqm Excess(+) Full Conversion INR INR Forty Three Thousand Six Hundred & Thirty Seven and Paise Sixty Only

0.00;[Re19]0.00 Providing and fixing brass curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete.: 25 mm diameter. (14.28.2) Metre Excess(+) Full Conversion INR INR Eight Thousand Two Hundred & Seven and Paise Twenty Only

0.00;[Re20]0.00 15 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement: 6 coarse sand) (13.5.2) sqm Excess(+) Full Conversion INR INR Thirty Eight Thousand Four Hundred & Sixty Eight Only

0.00;[Re21]0.00 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. (4.17) sqm Excess(+) Full Conversion INR INR Six Thousand Five Hundred & Sixty One and Paise Sixty Three Only

0.00;[Re22]0.00 Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks: 1:6 (1cement : 6 coarse sand) (11.1.2) sqm Excess(+) Full Conversion INR INR Twenty Three Thousand Four Hundred & Eighty Seven Only

0.00;[Re23]0.00 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. (11.4) sqm Excess(+) Full Conversion INR INR One Lakh Nineteen Thousand &Three and Paise Seventy Five Only

0.00;[Re24]0.00 Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement. 18 mm thick (11.6.1) sqm Excess(+) Full Conversion INR INR Three Thousand Five Hundred & Forty Two and Paise Ninety Three Only

0.00;[Re25]0.00 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar (15.7.4) Cum Excess(+) Full Conversion INR INR Three Thousand &Six and Paise Eighty Six Only

0.00;[Re26]0.00 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete. (16.42) Cum Excess(+) Full Conversion INR INR Eighty Five Thousand Five Hundred & Fifty Seven and Paise Sixty Seven Only

0.00;[Re27]0.00 Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two Coats (M/R) sqm Excess(+) Full Conversion INR INR One Lakh Sixty Eight Thousand One Hundred & Fifty Nine and Paise Sixty Nine Only

0.00;[Re28]0.00 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (M/R) sqm Excess(+) Full Conversion INR INR One Lakh Seven Thousand Seven Hundred & Twenty Eight Only

0.00;[Re29]0.00 Providing and fixing bright finished stainless steel 304 grade, 6 PIN Cloth hanger weight not less than 300g. For Bathroom Wall/Door with necessary screws, etc. complete. (M/R) Each Excess(+) Full Conversion INR INR Nine Hundred & Seventeen and Paise Fifty Two Only

0.00;[Re30]0.00 Providing and fixing hand shower (Health faucet) with 8mm dia, 1 metre long flexible tube and wall hook with N.R.V (Back Flow Preventer) of approved make complete as per manufacturer's specification and direction of Engineer In-Charge. (M/R) Each Excess(+) Full Conversion INR INR One Thousand Nine Hundred & Seventy Five and Paise Ninety Six Only

0.00;[Re31]0.00 Post-construction Anti Termite Treatment in the building as per ISI specification 6313 (1981) SPECIFICATION Providing & Injecting chemical emulsion for post ATT of soil of existing floors using chemical emulsion for post ATT of soil of existing floors using chemical emulsion @ 1 litre per holes, 300mm. Apart including drilling holes and plugging 12mm. Diaholes. Providing & Injecting chemical emulsion for post ATT of vids and masonary using chemical emulsion @ 1 lit. per holes at 300mm. Apart including holes at 45 degree and replugging the same. Providing & Injecting chemical emulsion for post ATT along the external perimeter below the concrete or masonary apron. Using chemical emulsion @ 2.5 litres per linear metre. Providing & Injecting chemical emulsion and wood work by chemical chlordane (Oil or Kerosene based) by drilling holes at downward. Angle and sealing the same. Chemical to be used: CHLORPYRIPHOS 20 EC (1ltr: 19ltr) or Emida Chloropid 30.5% EC (5 ml :1 ltr). (M/R) sqm Excess(+) Full Conversion INR INR Fourteen Thousand Five Hundred & Ninety Seven and Paise Ninety Only

0.00;[Re1]0.00 Providing and fixing PVC rigid foam sheet 1 mm thick on existing door shutters (bathroom and W.C. doors) using synthetic rubber based adhesive. (9.125) (DSR-2021) sqm Excess(+) Full Conversion INR INR Five Thousand Six Hundred & Sixty One and Paise Sixty Three Only

Total in Figures Excess(+) Full Conversion INR INR Fourteen Lakh Seventy One Thousand Two Hundred & Fifty and Paise Sixty Four Only

Please Enable Macros to View BoQ information