SITC as per REC Standards for Creation of 400KVA substation along with HT-LT network and Street Lights at IRP 22nd Battalion Headquarters, Indra Nagar Kishtwar in respect of Electric Division JPDCL Kishtwar on turnkey basis

SITC of following materials as per REC standards for Creation of 400 KVA Sub-Station alongwith HT/LT network & Street lights at IRP Bn.-22nd Headquarters Indra Nagar Kishtwar in respect of Electric Division JPDCL Kishtwar.

400KVA (11/0.433-0.250KV, 50Hz, Copper wound Distribution Transformer of Energy Efficiency Level-2 (New) with Bimettalic Connectors

ST Pole 9 mtr long (HT & Sub-station) 410-SP-33

ST Pole 9 mtr long (LT) 410-SP-33

50 mm sq. AB (HT) Cable XLPE (11KV)

11KV, 50 mm sq. Termination AB Cable Kit Heat Shrinkable

120 mmsq. AB (LT) cable (3x120+1x70+1x50 mm sq.) XLPE

70 mmsq. AB (LT) cable (3x70+1x50+1x35 mm sq.) XLPE

120mmsq. /70 mm sq. LT AB Cable Kit Heat Shrinkable

ACSR Weasel conductor 30mmsq.

11KV Pin insulator 12kV,5kN Polymer

11KV Disc insulator Polymer with fittings 12kV 45kN

C. I Cross Arm 8ft Long GI (S.stn & Link set) (75x40x6) mm

Angle Brace 8ft long GI for sub station (40x40x6) mm

C. I. Cross Arm 5ft Long GI (75x40x6) mm

GI V-Cross Arms with F-Clamps/Top Clamps & Back Clamps

Angle Brace 1 Mtr. long GI (40x40x6) mm

11KV GO AB Switch 3-phase,3-pole 400A

11KV Horn Gap fuse single phase 400 Amp.

Gapless Surge Arrestor, 9KV, 10KA, Lightening arrestor with polymer housing station type

Suspension clamp with Eye Hook and other assembly complete

Earthing complete by GI Pipe 40mm or GI Rod 20mm, 2.5 mtr. long through GI Strip, (for line poles)

Back Clamps 50x6mm GI

G.I Strip for earthing of LA set with Bobbin insulator assembly

LT Galvanised stay set with 50x8mm Stay clamp, Guy insulators (2No.), Anchor plate (200x200x6), Nut Bolts, 2 no. Turn Buckels, 1.8 mtr. long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

PVC cable 120mmsq 3.5 core

LT Distribution Box for 400 kVA DTR with MCCB for incomer & SFU's for Outgoing Circuits

3 Phase CT/PT Unit (30/5) with Trivector meter Complete set

PVC Cable 300mmsq Single core (Armoured) ,XLPE

Al Thimbles 300mmsq.

Al Thimbles 120mmsq.

Al Thimbles 70mmsq.

Earthing of sub station - excavation of earth pit of dia 650 mm & depth 3000 mm, installation of earthing pipe of 40mm nominal bore & 4 mm wall thickeness and length 2.5 meter long. GI strip for neutral earthing of size 25mm x 3mm for connection of Transformer body, GO set & LA, GI nuts & bolts, Reffiled with enchancement materials.

Cement Bottoming 1:2:4 Mix as per REC Standards of ST Poles 9mtr (1.5'x1.5x2.5')

Construction of RCC Bed for 400KVA transformer (for specifications/size read GTP)

LT Distribution Box (415V,AC) for service cable

GI Barbed wire/ Anti climing device for 20 no. ST Poles HT

Bus Bar Insulators

Shifting of Old existing HT Line 0.3Km line length

Almunium Strip

IPC of sorts

Fixing of Danger Plates with clamps

Nuts & Bolts Of Sorts Galnvanized

Applying coating of Red oxide & Almunium Paint on all ST Poles

200W Flood light with mounting, & MCB wiring circuit assemly complete .(make Crompton/Havells)