SPECIAL REPAIR OF BLDG NO P-36, 72/3 TO 4 (OR MD/ACCN) AND 04 (02 QTRS) AT MIL STN SANGRUR UNDER GE SOUTH PATIALA

Amount

'Notes: (i) Please refer Schedule 'A' Notes of tender documents.

Dismantling of brick tiles or terracing tiles single layers on roofs complete all as specified and directed.

Demolition of mud phuska, in roof any thickness including leeping plastering (whether full, thickness removed or only a part thereof) complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping cleaning and washing down with water to remove dust, etc complete all as specified and directed.

M&L for Applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg per square meter including cleaning the surface complete all as specified and directed.

PCC 1:3:6, type C-0 using 12.5mm graded stone aggregates as in padding over roof, minimum thickness at khurra as 25mm to maintain a slope of 1:100 ,complete all as specified and directed.

Applying membrane on primed surface by press application method with minimum 75mm longitudinal wise lap and 100mm over lap on the transverse direction duly sticked using APP (Atactic Polyproplene Polymer) modified prefabricated five layer, weight not less than 3.00 Kg/Sqm water proofing membrane, black finished non woven polyester reinforced 3mm thick complete all as specified and directed.

M & L cement concrete tiles 20-22 mm thick , type B-1 type (1:2:4) pointed in neat cement slury over 15mm thick sceed bed in CM (1:4) complete all as specified and as directed.

M & L 15 mm thick in screed bed in CM 1:4 , mixed on roof surface complete all as specified and as directed.

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed.

M & L for PCC (1:2:4) type C-2 using 20mm graded aggregate as in coping including necessary form work complete all as specified and directed.

Demolition of cement concrete un -reinforced in ground floors and pavings n.exc 15cm thickness complete all as specified and directed.

M&L for 75 mm thick PCC (1:3:6) type C2 (using 20mm grade aggregate) as in plinth protection, finishing the surfaces even & smooth w/o using extra cement complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing.

M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over screed bed 15mm thick in cement mortar (1:4) complete all as specified and directed.

M&L for Double charge, stainfree, vetrified tiles, Premium (1st) quality straight edge, coloured tiles 0.42mm^2 and 9-10 mm thick, as in floors etc. in any pattern of light coloured tiles as approved, in neat cement incl and over 20mm thick screed bed in CM (1:4) and pointed in white/coloured cement to match, in floors etc. complete all as specified and directed.

M&L for machine cut Kota stone slab flooring of Size 550x550x20 -25mm thick laid over 20-25mm thick cement mortar 1:4 screed bed laid and jointed with grey cement slurry mixed with pigments to match the shade of the slab including rubbing and polishing to mirror finish complete to be fixed in any position complete all as specified and directed.

Same all as per ser item No.17 hereinbefore but on vertical surfaces as in skiting /dado of size 550x150x20 mm thick complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.

M&L for 35mm thick plain framed (Factory made) Panelled shutters (two panel) of 2nd class HW without lock rail and panels of 9mm B.W.P commercial ply or 12mm thick veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part-I), kiln seanoned and chemically pressure treated complete all as specified and directed.

S&F for Butt hinges, heavy weight, cold rolled mild steel 100mm complete all as specified and directed

S&F for 200mm Aluminium anodised, barrel tower bolts of ex?truded section and fixed complete all as specified

S&F for 150mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S &F for 150mm longAluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed

M&L for 35mm thick glazed and skeleton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-1 section 8 clause 8.20(a), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F for 150mm Aluminium anodised, barrel tower bolts of ex?truded section and fixed complete all as specified and directed.

S&F for 150mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S &F for 150mm longAluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed

Providing and fixing factory made extruded aluminium casement windows with 50 micron powder coating with provision for desert cooler, doubled panelled and double shutters consisting of frame and mullion of 101.60 X 44.45 X 1.29 mm and shutters made of 63.5 X 31.75 X 1.29mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including 5mm thick glass in front shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperature in inner shutters complete fixed in all respect complete all as specified and directed including supply and fixing following items :- (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 2 Nos per leaf. (b) Powder Coated Aluminium Tower Bolt 150mm long - 2 Nos per leaf. (c) Powder Coated Aluminium Handles 150 mm - 1 Nos per leaf.

M&L for Factory made pressed steel frames for doors with one with one or more rebates size of frame (105 x 60 mm )including necessary fixing lugs, hinges, lock strike plate, etc.,complete as specified, complete all as specified and directed.

M&L for Factory made pressed steel frames for doors with one with one or more rebates size of frame (125 x 60 mm )including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed.

S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F for anodised aluminium door shutter, aluminium section weighting 0.55 kg/m including necessary joining, cleats,glazing clips,rubbber neoprene, packing headls 2 nos in each door hinges anodised aluminium snap beading screw etc including mortice lock with minimum three sets of key complete all as specified and directed.

M&L for Factory made steel cup board shutter made out mild steel, plain back sheet 1 mm thick as in shutter and 1.25 mm thick in frame work, cut to size, holes punched, welding, riveting, turning, bending etc. as require to made it in Godrej pattern complete with hinges, fasteners, locking system, 3 lever lock and CP handle, incl 2 coats of synthetic enamel paint over a coat of red oxide primer with spray machine complete all as shown on drawing.

Taking down cement plaster on walls built in cement mortar etc including racking out joints, hacking for key. Scrubbing down with water etc complete all as specified and directed.

M&L Rendering 15 mm thick in cement mortar 1:4 , mixed with water proofing compound, on brick or concrete surfaces, trowelled to even and smooth finish without using extra cement with WPC paid and measered sepretly complete all as specified and directed.

All as per srl item 37 hereinbefore but 10mm thick in CM 1:6 finishing even and smooth without using extra cement complete all as specified and directed.

Rendering 5 mm thick in cement mortar 1:3 as on concrete surfaces in ceiling finished even and smooth without using extra cement complete all as specified and directed.

M&L for applying two coats of oil bound distemper over one coat of primer over a coat of 2mm thick wall care putty on new plastered surfaces of walls including preparation of new surface complete all as specified and directed.

M & L for preparation new plastered to walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc including cornices and applying two coat of cement base paint @ 5 sq.m/kg/1 coat by using following brands of cement based paint by roller over a coat of priming coat complete all as specified and directed.

M&L for complete removal of existing treatment of wall and applying two coats of distemper oil emulsion over a coat of 2mm thick wall care putty filling complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation of old plastered surfaces of ceiling and applying one coats of white wash complete all as specified and directed.

Complete removal of existing treatment and applying acrylic wall care putty in external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc (thickness 3 mm) as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving exterior painting complete all as specified and directed. Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further external finishes. Please note that the further external finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surface complete all as specified and directed.

Preparing old surface of wood and wood based material of any description not otherwise described over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

Preparing old surface of steel material of any description not otherwise described over 10cm width or girth and applying one coats of synthetic enamel paint over a coat of priming complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10cm width or girth not otherwise described applying two coat of synthetic enamel paint on roof over a coat of red oxide primer complete all as specified and directed

Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.

M&L for 5mm thick PVC wood grain of width35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.

Dismantling water tank and removing to store exeeding 250litbut n. exc 500lit and removing complete all as specified and directed

M&L for Rotational moulded polythene three layer water storage tank cylindrical vertical with closed top 500ltr capacity hoisted and fixed in position, connecting to inlet or outlet and washout including disconnecting and demolition of existing tanks of any description complete all as specified and directed.

S&F in repair15 mm dia CP angle cock cast copper alloy fancy type with long shank and cup (concealed type) , screw down high pressure, screwed both ends for iron pipe or for union and fixed complete all as specified and directed.

S&F in repair 15 mm dia Bib Tap cast copper alloy fancy type CP with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe of 20mm having minimum weight 210gm/each fixed valve complete all as specified and directed.

S&F in repairVitreous china squatting pan white colour of Orissa patten size 580 x 440 white with (C I P trap long size) joint run and lead front or back inlet with integral footrest including connection to trap and to flushing pipe,anti-syphonage pipe, etc, fixed in repair complete and making good to floor in CM 1:3 complete all as specified and directed.

S/F in repairs low level dual flushing cistern of PVC 10 ltr capacity incl 45cm long PVC connection with brass nut at both ends, PVC flush pipe 32 mm bore and mild steel brackets of angle iron 25 x 25 x 3 mm, oval all length 20 cm with red-oxide primer complete all as specified (ISI Marked) incl taking down HL/LL flushing cistern and making good the disturbed surfaces in CM 1:3 complete all as specified and directed.

S&FBrass chromium plated shower roses 50mm size with swivel joint any size fixing in repairs complete all as specified and directed.

S&F in repairs vitreous china wash basin, size 550 x 400mm white including brackets, and waste coupling & pipe of 32mm dia etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed complete all as specified and directed.

S&F in repair concealed (with long shank and cup) stop cock fancy type, brass chromium plated with CP cup 15 mm bore fixed complete all as specified and directed.

S&F unbreakable corner set for bath room complete all as specified and directed.

S&F Mild steel rat tail rod pattern helical door spring of size 300mm including roller and roller plate fixing to iron frame by welding including cutting out old damaged/inactive helical door spring complete all as specified and directed.

Taking up or down steel water tubing and connection 15 mm bore in pipe incl cleaning for re-fixing complete all as specified and directed.

Taking up or down steel water tubing and connection 20 mm bore in pipe incl cleaning for re-fixing complete all as specified and directed.

M&L for Steel water tubing 15mm bore, medium grade, galvanised, with all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified and directed.

M&L for Steel water tubing 20 mm bore, medium grade, galvanised, with all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified and directed.

S&F Stainless steel sink with drainage board1.00 mm thick for kitchen with plugs washers and waste pipe of 40mm dia PVC west pipe incl new fittings upto floor trap,CP waste fitting and including cantileversand cast brackets, connecting union, etc, overall size 915mm x460 mm with bowl size 410mm x 330mm x 160mm including making good disturbed portion in CM 1:3 or PCC 1:2:4 complete all as specified and directed.

S&F CP towel rail 600mm long with brackets, chromium plated 20mm dia in repair complete all as specified and directed.

S&F in repairs CP Soap dish of size approximate size 160x90mm, fixed to plugs with chromium plated brass screws complete all as specified and directed.

Dismantling wall and ceiling board fibre, pulp insulation etc or insulation boards any thickness including cover fillets complete all as specified complete all as specified and directed.

S & F for 4 mm thick of size 600x600mm HSPC (high pressure Steam Cured) pre-primetered self embossed, textured designer board E-Board Classic to be fixed aluminium grid/section size 600mmx600mm with main runner 38x24x0.9mm thick ,cross tee 28.6x24x0.9 mm and wall angle 19x19xo.9 mm duly suspended with 2mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size complete all as specified.

M&L for 40 mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in floors, finished even & smooth surface without using extra cement complete all as specified and directed .

M&L cement concrete 1:2:4 type B-1using 20mm graded stone aggregate as in holdfast blocks complete all as specified and directed.

Demolition and breaking up drain pipes (salt glazed, stoneware, AC or reinforced concrete/PVC pipe) set in cement mortar/concrete 75 /110 mm dia fixed in position complete all as specified and directed.

Supply & fix 110mm dia PVC (SWR) pipes single/double socketed in any length with rubber ring joints, fixed to walls complete all as specified and directed.

All as per item No 77 hereinbefore above but bore of pipe 75 mm dia fixed to walls/floor complete all as specified and directed.

S&F in repair(SWR) 110mm bore pipe junction single (single T) equal and unequal with access door complete all as specified and directed.

S&F in repair PVC (SWR) bends 110mm bore of any radius with access door complete all as specified and directed.

S&F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75mm dia complete all as specified and directed.

Demolition of cement concrete (reinforced) other than ground floor, beams, chajja, landing etc. complete all as specified and directed.

Providing Nominal mix cement concrete 1:2:4 type B-1 ( 20mm graded agg ) as in chajjas landing cover slab, shelves etc and set in cement Mortar 1 : 4 complete all as specified and directed.

Supply only integral water proofing compound ISI marked complete all as specified and directed.

S&F PTMT Jet Spray with 1.0 metre long flexible tube including making connections and fixed in position complete all as specified and directed.

S&F for 15mm health faucet with CP flexible pipe of 1.25m long incl making connection and fixed in position complete all as specified and directed

S&F Vitreous China wash basin, white, flat back, size 580x450 (for Hospilal use) excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.

M&L for wall mounted mixer assembly, brass chromium plated, comprising of centre outlet tap, double inlets for hot & cold water, non telephonic shower arrangement, with connecting legs & wall flanges, inlets suitable for 15mm bore connections complete all as specified and directed.

S & F in of galvanised mild steel wire cloth complete all as specified and directed.

S&F in repair Sheet glass 5.5mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5sqm in each pane complete all as specified and directed.

M&L for efflorescence treatment by applying two layer of fastflex Dr. fixit (Pidilite co.) over brick surface after taking down plaster from brick work and finally apply 15 mm thick plastering with mixing of (URP 301) over treated surfaces (note- (i) taking down plaster and applying of 15mm thick plaster will be measured separately) (note i after taking down plastering, uneven/brick joint surfaces will be repaired with cement mortar in 1.3 with mixing of WPC URP 301 complete all as specified and directed.

M&L Preparation of old plastered or unplastered surfaces of walls, two coats of cement base paint complete all as specified and directed.

M&L Preparation of old plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion over complete all as specified and directed.

Demolition of brick work built in cement mortar incl all quoins, arches, pillar etc complete all as specified and directed.

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified.

M&L for brick work in cement mortar (1:4) using sub class 'B' bricks staight or curved on plan to any raidus but in half thick brick walls complete all as specified and directed.

M&L Plain cement concrete (1:3:6) type C-0,using 12.5 mm graded mechanically crushed stone aggregate as in back filling of pressed steel frame /hold fast blocks etc and similar complete all as specified and directed.

S&F 300 mm long MS rat tail pattern spring hinge (helical door spring) including roller and roller plate, complete all as specified and directed.

S&F factory made aluminium 50 micron powder coated deco grill, opening size 101.6 X 63.5 mm (4"X2½") and of approx weight @ 1.345 Kg/sq.m complete fixed in position in windows complete all as specified and directed.

Providing and fixing factory made extruded aluminium ventilators with 50 micron powder coating of frame of 63.5 X 38.10 X 1.29 mm including 5mm thick frosted glass in lower 55% portion of shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperture in upper 45% portion of shutter and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and complete fixed complete all as specified and directed.

S&F 30mm thick PVC door factory made solid panell shutters concisting of frame made out of MS tubes for top and bottom rails, MS frames shall be covered with hit moulded plain coulour PVC 'C' chanel having a PVC sheet strip of 20mm width stuck in side with screws complete all as specified and directed.

S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, fixed in opening as per specification and drawing complete all as specified and directed.

S&F Butt hinges 75mm, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21ed aluminium alloy with galvanised complete all as specified and directed.

M&L 25mm thick PCC (1:2:4) type B-0 using 12.50 mm graded crushed stone aggregates in complete all as specified and directed.

M&L non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20mm thick screed bed in CM (1:4) laid in complete all as specified and directed.

M&L Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

S&F mild steel chromium plated 20mm curtain rod with fixing brackets, stops rollerss complete incl fixing brackets, stops etc fixed in repair complete all as specified and directed. (For the purpose of mesurement and payment running length of curtain rod only shall be considered.)

S&f Coolar stand Joist, channel, angle, or tee sections, fixed independently, without connecting plates, conforming to Fe 410-W (Gde-E-250) quality -A complete all as specified and directed.

S&F framed work as in doors or gates of angles or other section with gussets plate rails braces etc complete drill for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and incl either hook and hinges or steel hanging door fitting steel sheeting or other covering, running rails and hanging also fastening and fixing complete incl pintel hinges, stops hand made sliding bolts etc conforming to Fe 410-w-O or E 250-O, including taking down old steel gate complete all as specified and directed.

M&L for preparing new surfaces of any description over 10 cm girth or width, not otherwise described and applying two coats of synthetic enamel paint over a coat of Red oxide on new surfaces of steel or iron, complete all as specified and directed.

PVC ( SWR) rain water pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls complete as as pecified including flat iror clamps 25x3mm complete all as specified including taking out old damaged AC rain water pipescomplete all as specified and directed.

S&F in repair Pillar taps hot and cold mixture Cast copper alloy fancy type 15mm bore , with capstan heads chromium plated screwed down high pressure and fixed complete all as specified and directed.

S&F in repair 450 mm long PVC connection with brass nuts on both ends for 15mm bore pipes of approved quality complete all as specified and directed

M&L PCC (1:3:6), 50mm thick as in PCC path/ plinth protection.finished the surfaces even and smooth with out using extra cement complete all as specified and directed.

TMT bars 6 to 8mm dia and over mild steel as in reinforcement, cut to length bent to shape required including cranking and bending with MS wire (anealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat?forms and like in white cement with admixture of pigment to match with shade of granite stone including grinding and polishing complete laid over and including 15mm thick screed bed or bedding layer in CM(1:4) , in complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

S & F in repair mild steel powder coated peg set of 6 fixed to wall with steel screws complete all as specified & directed.

S & F in repair Stainless steel wall mounted kitchen dish rack of size 750mm X600mm X 250 mm as described complete all as specified and directed.

S&F in repair cast iron sand cast soil waste & vent pipe in any length with or without ears with cement joints laid in trenches or in floor of 100 mm bore with sand cast paper complete all as specified and directed.

S&F in repair cast iron 100mm sand cast vent cowl with cement joints bore with sand cast paper complete all as specified and directed.

S&F in repair CI P & S trap with grating including jointing to waste pipe in neat cement 100 mm dia fixed in cement concrete (1:2:4) type B1 complete all as specified and directed.

S&F in repair 100mm bore Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

Demolition of cement concrete any description and any position not otherwise specifically provided (below or above ground level)complete all as specified and directed.

PCC 1:2:4 type B 0) using 12.5 mm graded stone aggregate 25 mm thick mixing with WPC as in bedding in sunken portions etc complete all as specified and directed.

M&L for Plain cement concrete 1:7:12 mix, type E-2 (using 40mm graded Brick aggregate) as in filling of sunken portion complete all as specified and directed.

Applying three coats of brush bond acrylic based cementitious material of approved quality for sunken portion treatment all as per manufacturer instruction and providing 200 mm micron thick polythene film over 85/25 grade bitumen layer @ 0.5 kg /Sqm complete all as specified and directed.

Complete removal of existing treatment of any type/description such as distempering work ,internal emulsion etc from internal/external surfaces of walls & ceiling with mechanical means/grinder including removal of material from site complete all as specified and directed.

S&F in repair Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed.

S&F in repair CI floor trap with grating including jointing to waste pipe in neat cement 75 mm dia fixed in cement concrete (1:2:4) type B1 complete all as specified and directed.

S&F in repair 100mm bore Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F in repair 100mm Branch pieces, double/cross, T (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

S&F in repairGun metal globe or gate valves of 20 mm dia with iron wheel head screwed both ends for iron pipe and fixed in repair complete all as specified and directed.

Taking down carefully copper/ aluminium point wiring (light fan socket or power) complete along with fittings such as switches, ceiling roses, Pendants regulators Tube fittings and other Kits & fittings/conduit from surface /wall . Removing the material from work site and making good the disturbed portion/ surface of wall/ floor/ ceiling etc by using cement mortar and colour/ white wash to match with the existing surface / location. (Note :- Serviceable fitting / fixtures will be reused in the work as directed by Engineer- in-Charge)

Taking down un-serviceable main switch, DB’s insulators, DB for MCB etc of any type and any capacity and further disposal including making good the disturbed surface and matching the colour of wall with the existing colour wash / paint / distemper wherever required (as per the existing ) all as directed by Engineer-in-Charge.

Taking down ceiling fan of any descrptions, servicing and repairs of fans as required, fixing back, connecting and testing the fan for its satisfactory function including making good the disturbed surface and matching the colour of wall with the existing colour wash / paint / distemper wherever required (as per the existing ) all as directed by Engineer-in-Charge.

Taking down exhasust fan of any descrptions, servcing and repairs of fans as required, fixing back, connecting and testing the fan for its satisfactory function including making good the disturbed surface and matching the colour of wall with the existing colour wash / paint / distemper wherever required (as per the existing ) complete all as specified and directed.

Taking down elect water heater of any descrptions, servcing and repairs of geyser as required, fixing back, connecting and testing the geyser for its satisfactory function including making good the disturbed surface and matching the colour of wall with the existing colour wash / paint / distemper wherever required (as per the existing ) complete all as specified and directed.

M & L for point wiring with FRLS PVC insulated unsheathed multi-stranded copper conductor 1.5 Sq.mm (nominal area ) single core cable 1100 Volt grade drawn in and including rigid non metallic concealed PVC Conduit of suitable size (not less than 20 mm) on wall , surface of ceiling with all fittings, such as tee, bend, elbow, socket etc including pressed steel sunken boxes (Terminal boxes) with earth dolly,duly galvanised, with white shade frame & cover plate of suitable module for modular switch / or sockets including FRLS PVC insulated unsheathed stranded copper conductor 1.5 Sq.mm (nominal area ) single core cable as earth continuity conducter to common earth and connected to earth dolly, complete all as specified, for the following :-

(a) One light/fan point controlled by one 1-way switch complete all as specified and directed.

(b) One light/fan point controlled by two 2-way switch complete all as specified and directed.

(c) One 3/5 pin socket outlet, 5 Amp on independent board complete all as specified and directed.

(d) One 3/5 pin socket outlet, 5 Amp on same board complete all as specified and directed.

(e) One bell /buzzer point controlled by one push button on independent board complete all as specified and directed.

M&L for point wiring with FRLS PVC insulated unsheathed multi-stranded copper conductor 4 Sq.mm (nominal area ) single core cable 1100 Volt grade drawn in and including rigid non metallic concealed PVC Conduit on wall , surface of ceiling with all fittings, such as tee, bend, elbow, socket etc including pressed steel sunken boxes (Terminal boxes) with earth dolly,duly galvanised, with white shade frame & cover plate of suitable module for modular switch / or sockets including FRLS PVC insulated unsheathed stranded copper conductor 4 Sq.mm (nominal area ) single core cable as earth continuity conducter to common earth and connected to earth dolly, complete all as specified and directed.

M&L for point wiring with FRLS PVC insulated unsheathed multi-stranded copper conductor 2.5 Sq.mm (nominal area ) single core cable 1100 Volt grade drawn in and including rigid non metallic concealed PVC Conduit on wall , surface of ceiling with all fittings, such as tee, bend, elbow, socket etc including pressed steel sunken boxes (Terminal boxes) with earth dolly,duly galvanised, with white shade frame & cover plate of suitable module for modular switch / or sockets including FRLS PVC insulated unsheathed stranded copper conductor 2.5 Sq.mm (nominal area ) single core cable as earth continuity conducter to common earth and connected to earth dolly, complete all as specified and directed.

Dismantling / Taking down existing unserviceable sub main wiring from batten / conduit of any size all as directed. Removing the material from work site and making good the disturbed portion/ surface of wall/ floor/ ceiling etc by using cement mortar and colour/ white wash to match with the existing surface / location complete all as specified and directed.

M &L for sub main surface wiring with PVC insulated unsheathed copper conductor cable of size 6 Sqmm single core through concealed rigid nonmetallic PVC conduit of suitable size (Not less than 25 mm dia) in wall and surface of ceiling including 6 Sqmm PVC insulated unsheathed copper conductor cable for continuous earthing form main earth dolly including making good the disturbed potion of wall complete all as specified and directed. (Note :- Two run of 6 Sqmm copper cable one run of 6 Sqmm copper cable and PVC conduit will be measured as a single length)

M &L for sub main surface wiring with PVC insulated unsheathed copper conductor cable of size 10 Sqmm single core through concealed rigid nonmetallic PVC conduit of suitable size (Not less than 25 mm dia) in wall and surface of ceiling including 10 Sqmm PVC insulated unsheathed copper conductor cable for continuous earthing form main earth dolly including making good the disturbed potion of wall complete all as specified and directed. (Note :- Two run of 10 Sqmm copper cable one run of 10 Sqmm copper cable and PVC conduit will be measured as a single length)

M &L for sub main surface wiring with PVC insulated unsheathed copper conductor cable of size 16 Sqmm single core through concealed rigid nonmetallic PVC conduit of suitable size (Not less than 25 mm dia) in wall and surface of ceiling including 16 Sqmm PVC insulated unsheathed copper conductor cable for continuous earthing form main earth dolly including making good the disturbed potion of wall complete all as specified and directed. (Note :- Two run of 16 Sqmm copper cable one run of 16 Sqmm copper cable and PVC conduit will be measured as a single length)

Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB complete all as specified and directed.

Switch Modular type, 6 Amp, 240 Volts, one way complete fixed as in repair complete all as specified and directed.

Switch Modular type, 6 Amp, 240 Volts, Two way complete fixed as in repair complete all as specified and directed.

Switch Modular type, 16 Amp,240 Volts, one way complete fixed as in repair complete all as specified and directed.

Socket outlet, Modular type, 6 Amp complete fixed as in repair complete all as specified and directed.

Socket outlet, Modular type, 6&16 Amp complete fixed as in repair complete all as specified and directed.

Bell Push, Modular type, 6 Amp complete fixed as in repair complete all as specified and directed.

Fan regulator, modular type electronic step type complete fixed as in repair complete all as specified and directed.

S&F ceiling rose surface bakelite two to three terminal 65x50 mm complete all as specified and directed.

S&F in replacement Tube light fittings LED type 1x20 Watt 4 ft long incl LED tube rod and incl 3 core flexible wire 0.75 Sqmm copper cable complete all as specified and directed.

S&F in replacement Tube light fittings LED type 1X10 Watt, 2 ft long incl LED tube rod and incl 3 core flexible wire 0.75 Sqmm copper cable complete all as specified and directed.

Supply & fix LED bulk head ,10 W complete complete all as specified and directed.

S&F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F LED Bulb 9 watt 230 volt retrofit type complete all as specified and directed.

S&F in bell ding dong operating on AC 230 volt single phase complete all as specified and directed.

S&F MCB DB SPN 8 Way with acrylic double door complete all as specified and directed.

S&F including flushing in wall MCB distribution board vertical TPN 4 way 415 Volts AC double door type sheet steel phosphotised powder painted with bus bar neutral earth bar including provision of MCB TPN 63 Amp conforing to IP 43 as incomer all as complete specified and directed.

S&F MCCB TPN 100 Amp 415 volt complete all as specified and direceted.

S&F MCCB TPN 200 Amp 415 volt complete all as specified and direceted.

S&F MCB SPN 240V 40 Amps C series 10 KA complete all as specified and direceted.

S&F MCB SPN 240V 40-63 Amps C series 10 KA complete all as specified and direceted.

S&F MCB SP 240V 63 Amps C series 10 KA complete all as specified and direceted.

S&F MCB SP 240V 40 Amps C series 10 KA complete all as specified and direceted.

S&F MCB SP 240V 6 to 32 Amps C series 10 KA complete all as specified and direceted.

Taking Down the KWH meter along with wooden board/DB after removing all electrical connection complete all as specified and directed.

Refixing & connecting the same or new serviceable KWH energy meter after wiring complete all as specified and directed.

S&F Sheet metal enclosure factory made of size 20cm x 25cm x 12.5 cm deep box made out of 2mm thick ms sheet with double door with locking arrangement , epoxy power coated holes drilled for cable entries suitable for accomodating electric energy meter including brick/cement works as per site requirement includiing flushing the box in walll and making good the disturbed portion of wall /surface complete all as specified and directed.

Taking down old U/S LT UG cable of any size from trenches/pipe/floor/walls complete all as specified and directed.

Supply laying jointing cable XLPE insulated PVC shetahted strip wire armoured 1100 volt 4 core 25 sqmm multi stranded aluminium conductor laid in trenches/wall/ducts etcincluding necessary fixing arrangement such as cable lugs glands etc complete after removing/taking out extg unsv cable to the entire satisfaction of Engr in Charge complete all as specified and directed.

Supply laying jointing cable XLPE insulated PVC shetahted strip wire armoured 1100 volt 3.5 core 70 sqmm multi stranded aluminium conductor laid in trenches/wall/ducts etc including necessary fixing arrangement such as cable lugs glands etc complete after removing/taking out extg unsv cable to the entire satisfaction of Engr in Charge complete all as specified and directed.

Excavation in trenches n.exc 1.5 mtr deep and n.exc 1.5 mtr wide getting out soil complete all as specified and directed.

Returning filling in including spreading leveling, watering and well ramming in layers complete all as specified and directed.

Removing excavated soil to a distance not exc. 50 mtr and depositing complete all as specified and directed.

Supply and spreading dry sand in trenches for cushioning of cable complete all as specified and directed.

Supply and laying well brunt bricks sub class ‘B’ of size 25 x 12.5 x 7.5 cm complete all as specified and directed.

S&F HDPE pipe of size 50 mm dia complete all as specified and directed.

S&F GI Tube light grade 50 mm dia as in cable protection pipe complete all as specified and directed.

M & L for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2 mtr deep below ground level with top edgw of the plate not less than 1.4 mtr below normal ground level , connected earth wire 4 sqmm by means of bolts nuts check nuts and washers of galvanised iron or steel all as shown in electrical plate No 5 connected to earthing test point all as specified or indicated including PCC pit in PCC(1:3:6) type C-1 cast iron frame 50mm thick pre cast RCC(1: 1 1/2:3) nominal mix cover slab reinforced with 8 mm dia mild steel deformed bar 15cc and suitable handle of 10 mm Dia round bar including necesary excavation earth work in soft/loose soil and disposal of spoil to a distance n.exc 50m and funnel with watering pipe wire mesh copper lugs etc GI protection pipe of size 15 mm bore including testing complete all as specified and directed.

Supply and fixing warm white LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

RINKU BROTHERS (BID ID -3094113)

LM CONSTRUCTIONS (BID ID -3086405)