REPAIR TO PLASTERING FLOORING, TILING,CHAJJA AND ROOF TREATMENT WORK IN CERTAIN BUILDINGS IN ZONE-III AREA AT BHAGAT LINE UNDER AGE B/R-III OF GE (SOUTH) MEERUT CANTT

Amount

Demolition of cement concrete as in ground floor and paving n.exc 15cm thick (below or above ground level) and removing debris to a distance not exc 100m complete all as specified and directed.

Material and Labour for 40mm thick cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in flooring, surfaces finished even and smooth using extra cement complete all as specified and directed.

Material and labour for 75 mm thick PCC 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection/Path paving surface finished even and fair complete all as specified and directed.

Material and labour for 100mm thick PCC 1:2:4 type B-2 (using 40mm graded crushed stone aggregate) as in flooring complete all as specified and directed.

Supply only glass dividing strips, 3mm thick 38mm wide, as in floor all as specified and directed.

Dismantling, floor tiling kota stone etc including cement mortar bedding and removing rubbish off the premises complete all as specified and directed.

Taking down/removal of wall tiling, terrazzo topping , kota stone from vertical surfaces any type including cement mortar bedding upto brick surfaces including raking of joints scrubbing down with water for new tile work and removing rubbish of the premises complete all as specified and directed.

Taking down cement plaster of any description from brick or stone wall /chajja/ facia/ drop wall / concrete surfaces etc including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins arches pillars etc, complete all as specified and directed.

Material and Labour for built in steel cup board with pressed steel frame of size 75x45x1.25mm fixed to masonary wall in PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) block of size 230x230x150 mm with mild steel FI 25x3mm hold fast 150mm long , 1.00 mm thick pressed steel shutter godrej pattern including MS hanging rod of 10 mm dia with bracket fixed on inner side of shutter , on other leaf provision of MS peg set of three pegs including locking arrngement ( MS lock 100 mm size 4 lever with key make of lock Godrej/Link/Harrison ), spray painting two coat of synthetic enamel paint over red oxide primer all around the steel surfaces of frames and shutter including taking down of old cup board shutter and making good the disturbed surfaces to match with the existing complete all as specified and directed by Engr-in-Charge.

Material and Labour for mild steel framed work as in chajja/sun shade / desert cooler stand at any height incl all necessary welding and fixed to wall , cutting hole and fixing in PCC 1:2:4 type B1 (using 20 mm graded crushed stone agg ) and making good to disturbed surfaces to match the existing including scafolding etc required complete all as specified and directed.

Supply and fixing pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, washer etc complete all as specified and directed.

Supply and fix in repair galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staples including flat iron beading of size 12x5 mm and applying two coat of synthetic enamel paint over a coat of red oxid complete all as specified and directed.( Note:- Removal of shutter and refixing required at places where necessary shall also included in the rate quoted )

Material and labour for 25mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in sub base flooring finished even and fair complete all as specified and directed.

Material and labour for rendering, 15 mm thick on fair faces of brick or concrete surfaces in cement mortar (1:6), surfaces finished even and smooth complete all as specified and directed.

Material and labour for rendering, 10 mm thick as in ceiling/chajja facia in cement mortar (1:4), surfaces finished even and fair faces complete all as specified and directed.

Material and labour for complete removal of existing of existing roof treatment complete all as specified and directed.

Material and labour for rendering, 10 mm thick on conc surfaces of roof in cement mortar (1:4),mixed with water proofing compound as per manufacturer instruction surfaces finished even and smooth complete all as specified and directed. ( Note:- WPC shall be measured and paid seperately under respective item of BOQ)

Supply only liquid water proofing liquid as approved by GE complete all as specified and directed.

Material and labour for cleaning of concrete or plastered surfaces of roof and applying priming coat using with bituminous primer @ 0.30kg per Sqm followed evenly by a tack coat @ 1.20 kg per Sqm using 85/25 grade industrial hot blown bitumen bitumen, over it laid with 3mm thick APP modified polymeric water proofing membrane minimum weight 3.6 Kg per Sqm reinforced with non-woven polyester fabric unrolled and bonded to substrate with side and end laps 75mm and 100mm as per manufacturer’s instruction and applying over it a tack coat using 85/25 grade industrial hot blown bitumen bitumen @ 1.20 kg per Sqm and finally finished the top of polymeric water proofing membrane with a coat of bituminous aluminum paint @ 0.20 kg per Sqm as per manufacturer’s instructions, complete all as specified and directed.(Note- work shall be carried by Company authorised representative)

Material and labour for plain cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in roof kerb or mud stop, padding concrete on roof slab etc complete all as specified and directed.

Material and labour for preparation of new or previously untreated steel surfaces of any description, not otherwise described over 10 cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

Material and labour for preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

Material and labour for preparation of newly plaster surface of wall and applying two coats of cement base paint over and including one coat of primer complete all as specified and directed.

Materials and labour for preparing the surfaces of wall by applying a coat of wall care putty (Birla/J K wall care putty) and applying two coat of oil bound distemper of approved colour complete all as specified and directed.

Material and labour for preparation of plastered or unplastered old surfaces of walls and applying one coats of white wash complete all as specified and directed.

Material and labour for preparation of plastered or unplastered old surfaces of ceiling and applying one coat of white wash complete all as specified and directed.

Material and labour for washing, rubbing down and stopping of distempered and painted old surfaces of wallls and applying one coat of oil bound distemper complete all as specified and directed.

Material and labour for washing, rubbing down and stopping of distempered and painted old surfaces of wallls and applying one coat of cement base paint over a coat of primer/putty complete all as specified and directed.

Material and labour for plain cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping, benching, cills, lintels, band, filling around hold fast, filling in chowkats etc complete all as specified and directed.

Material and labour for joint free glazed ceramic coloured tiles of size 300X450X6-7mm thick as in skirting/ dado set, jointed in neat cement slurry and pointed in white/coloured cement to match, laid over and including 15 mm thick backing screed in cement mortar 1:4 complete all as specified and directed.

Material and labour for 400x400x7-8 mm thck (Square/rectangular) Non skid ceramic coloured tiles, in floors surface set and jointed in neat cement slurry and pointed with white or colour cement to match over and including 15mm screed bed in cement mortar 1:6 complete all as specified and directed.

Material and Labour for Non skid, ceramic coloured tiles, 7-8 mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floors, set and jointed in neat cement slurry and pointed with white or colour cement to match over and including 15mm screed bed in cement mortar 1:6 complete all as specified and directed.

Material and Labour for light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

Material and labour for vitrified ceramic tiles 10 mm thick (square/rectangular) polished, light shade , area of each tiles not exceeding 0.36 Sqm as in vertical surfaces/ skirting/ dado , set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Material and labour for coloured non skid ceramic tiles 400x100x7-8mm thick as in skirting / dado , set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Material and labour for glazed ceramic coloured tiles of size 300X200X6-7mm thick as in skirting/ dado set, jointed in near cement slurry and pointed in white/ coloured cement to match, laid over and including 15mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Material and labour for 12-14mm thick machine cut prepolished Udaipur green slab flooring on cooking platform over and including 15mm thick screed laid in cement mortar 1:4 and jointed with grey cement mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed.

Material and labour for 20-25 mm thick kota stone slab as in floors etc, set and jointed in neat cement and pointed with grey cement mixed with pigment to match the shade of slab over and including 15mm thick screed bed in cement mortar 1:6 including rubbing and polishing to achieve mirror finish and rounding or chamfering edges where directed, size of stone not less than 550mmX550mm, complete all as specified and directed.

All as per item No 40.00 here-in-before but as in landing risers, treads, skirting, dado etc. over & including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

Material and labour for brick work with fly ash bricks straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) complete all as specified and directed.

Material and labour for brick work with fly ash bricks straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4 complete all as specified and directed.

Material and labour for repair to overhang porting of chajja, facia, dropwall etc for continuous work by providing PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregate) and finished with CM (1:3) after taking down of damaged portion of RCC work by maintaining same level including all necessary formwork and finished the surface to match with the existing surface by providing same finish complete all as specified and directed by Engr-in-Charge. (Height of work to be considered exc 4.0 mtr and upto 7.50 mtr from FFL of ground floor). (Note: Wherever reinforcement is required to be provided will be paid separately under relevant item )

Material and labour for repair to overhang porting of chajja, facia, dropwall etc for continuous work by providing PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregate) and finished with CM (1:3) after taking down of damaged portion of RCC work by maintaining same level including all necessary formwork and finished the surface to match with the existing surface by providing same finish complete all as specified and directed by Engr-in-Charge. (Height of work to be considered upto 4.00 mtr from FFL of ground floor). (Note: Wherever reinforcement is required to be provided will be paid separately under relevant item).

All as per item No 45.00 here-in-before but as in height of work above 7.50 M to 11.00 M complete all as specified and directed.

Material and labour for drip mould 50mmx20mm in bottom of chajja in CM 1:3 including preparing plaster surfaces to receive drip mould at any height including all scafolding work etc required for work complete all as specified and directed by Engr-in-Charge.

Material and labour for forming grooves 50mmx25mm for inserting galvalume sheet and making good the surfaces in CM 1:3 / PCC 1:2:4 type B0 ( using 12.5 mm graded crushed stone agg) and making the surfaces to match the existing complete all as specified and directed by Engr-in-Charge.

Material & labour for TMT Bars 6-10mm dia cut to length bent to shape required inculding cranking bending spirally hooping for columns hooking ends etc and binding with and including mild steel wire annealed less than 0.9mm dia or securing with clips complete all as specified and directed.

Supply and fix in repair, sink with drain board made of stainless steel 0.80mm thick for kitchen with plug, washer, chromium plated brass waste fitting and PVC waste pipe including bedding in cement mortar on to dwarf wall or fixing on cantilever brackets and connecting union to pipes, overall size 915x460mm, bowl size 410x330x 200mm including taking down vitreous china sink complete all as specified and directed.

vibha associates

Shivam Construction Co.

Jain Engineering Works

Madan Lal Jain and Sons

Tayal Builders

Jay Ambay Enterprises

m/s gupta construction

AR Enterprises

Punit Jain

R.D.Builders

jitendra AND Co