Renovation to North Facing Tiled Roof Middle School Building - Puthupalayam H-O Pasur Panchayat

Amount

Name of the Work : Renovation to North Facing Tiled Roof Middle School Building @ Puthupalayam H/O Pasur Panchayat

Removing and adjusting mangalore roofing tiles including all labour charges etc. complete

Cleanning and removel of cement morter plastering

Reroofing the Mangalore Tiled Roof and Over Ceiling Tiles New including all cost etc, completed etc.,

Plastering with cement mortar 1:5 mix to 12mm thick including alla labour charges etc

Dismandling the brick wall in cement mortor including clearing away from the site

Roughening surfase the existing damaged flooring

Providing granolethic floor finish in cement concrete 1:2:4 mix using 10-12mm

Providing and Fixing of steel section including all charges etc.

Brick work in following Cement Mortar using best quality Fly ash bricks of size 23x11x7cm for foundation and basement including curing etc.,complete complying with standard specification.

Distembering two coats with best approved distember including cost and conveyance of all materials to site and all labour charges etc complete

Painting two coats with Emulsion Paint over the one coat of Priming coat including cost and conveyance of all materials to site and all labour charges etc complete

Painting two coats over Old Wood works using ready mixed enamel paint including cost and conveyance of paint and all labour charges etc complete

Painting two coats over New Iron works using ready mixed enamel paint including cost and conveyance of paint and all labour charges etc complete

Black Board Paint Two Coats with Approved Cement Paint over Cement Plastered surface including cost and conveyance of materials and labour charges etc complete. - 10.00 Sqm.

Sub Estimate For Electrical Works

Wiring with 2 x 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mm x 100mm x 113mmTW switch box with 3mm thick hylem sheet for 15A 3 pin non inter locking wall socket with 15A flush type switch with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed power plug point (SD 40)

Supply and fixing of 1200mm (48") AC ceiling fan c omplete with stepped electronic 300W regulator with 1 meter down (SD 107) rod on the existing clamp (SD 107)

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour for open PVC light point / fan point (for electronic regulator) (6 points per coil) SD-20

Supply and fixing of 20W 4 Feet LED Fitting with LED with TW round blocks on wall or ceiling with PVC unsheathed Copper leads from terminals to the fitting SD -87

Sub Estimate -Construction of Chappal Rack

Brick work in following Cement Mortar using best quality Fly ash bricks of size 23x11x7cm for foundation and basement including curing etc.,complete complying with standard specification.

Brick Partition 11cm thick in CM 1:3 mix using country bricks ground moulded of size 22 x 11 x 7cm for the following including curing etc., complete complying with standard specifications.

Plastering with CM 1:5, 12mm thick.in all floors including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Providing Cuddapah Slab 38 / 40mm Thick including all charges

Sub Estimate -Construction of Cub Board For Student

Brick work in following Cement Mortar using best quality Fly ash bricks of size 23x11x7cm for foundation and basement including curing etc.,complete complying with standard specification.

Brick Partition 11cm thick in CM 1:3 mix using country bricks ground moulded of size 22 x 11 x 7cm for the following including curing etc., complete complying with standard specifications.

Plastering with CM 1:5, 12mm thick.in all floors including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Providing Cuddapah Slab 38 / 40mm Thick including all charges

Sub Estimate -Construction of Cub Board For Teachers

Brick work in following Cement Mortar using best quality Fly ash bricks of size 23x11x7cm for foundation and basement including curing etc.,complete complying with standard specification.

Brick Partition 11cm thick in CM 1:3 mix using country bricks ground moulded of size 22 x 11 x 7cm for the following including curing etc., complete complying with standard specifications.

Plastering with CM 1:5, 12mm thick.in all floors including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Providing Cuddapah Slab 38 / 40mm Thick including all charges

Providing Cup-board Shutter with frame using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol along with necessary furniture fittings, such as, hydralic hinges, tower bolt,handles, multi purpose locks etc., as directed by the Departmental Officers. The design pattern, water proof plywood, laminate sheet and other materials should be got approved from the Executive Engineer befoe use on work.

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

Sri Vinayaga Engineering And Traders (BID ID -1181434)