Loading
Loading…
New: tenders and results on WhatsApp
New: Find tenders, results and companies on WhatsApp, by text or voice note
New: tenders and results on WhatsApp
New: Find tenders, results and companies on WhatsApp, by text or voice note
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
Refer Docs
Closing Date
26 Nov 2026, 2:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
KHEEM PRAKASH
2 nd Floor, South Block 2, MDL Mumbai, 400010.
Manufacturing and supply of Carbon steel pipes for MDL, GRSE, HSL and GSL under a parallel rate contract.
2026_MDL_100856_1
MDL/GM(M)/Intg-Proc/2026/CS Pipes/01
Limited
Miscellaneous Goods
Tender cum Auction
MDL, GRSE, HSL and GSL
Not applicable
3 documents required · 3 mandatory
₹0
Exempted
5 Nov 2026
5 Nov 2026
27 Nov 2026
5 Nov 2026
26 Nov 2026
5 Nov 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Pipe, Carbon Steel, 10 NB, 17.1 OD, Sch. 40, 2.31 mm thk., As per ASTM A 106 Gr. B & ANSI B 36.10. Seamless, Standard Length 6 Mtrs, +/-1 Mtrs Tolerance. All other dimensional tolerances shall be as per ANSI B 36.10.
To be supplied with
(i) MTC (Material, Dimensional & Testing).
(ii) Bearing heat marks on each length at one end with tracability to MTC. Both ends to be suitably blanked.
(iii) Pipes shall be non-galvanised
(iv) Pipes to be externally coated with primer.
(v) Pipes should be suitable for hot bending, cold bending, machine bending & collar formation. If any defects arise during fabrication, the pipe length to be replaced free of cost. | 1,200 | meter | - | - |
| 2 | Pipe, Carbon Steel, 10 NB, 17.1 OD, Sch. 80, 3.2 mm thk., As per ASTM A 106 Gr. B & ANSI B 36.10. Seamless, Standard Length 6 Mtrs, +/-1 Mtrs Tolerance. All other dimensional tolerances shall be as per ANSI B 36.10.
To be supplied with
(i) MTC (Material, Dimensional & Testing).
(ii) Bearing heat marks on each length at one end with tracability to MTC. Both ends to be suitably blanked.
(iii) Pipes shall be non-galvanised
(iv) Pipes to be externally coated with primer.
(v) Pipes should be suitable for hot bending, cold bending, machine bending & collar formation. If any defects arise during fabrication, the pipe length to be replaced free of cost. | 24 | meter | - | - |
| 3 | Pipe, Carbon Steel, 100 NB, 114.3 OD, Sch. 40, 6.02 mm thk., As per ASTM A 106 Gr. B & ANSI B 36.10. Seamless, Standard Length 6 Mtrs, +/-1 Mtrs Tolerance. All other dimensional tolerances shall be as per ANSI B 36.10.
To be supplied with
(i) MTC (Material, Dimensional & Testing).
(ii) Bearing heat marks on each length at one end with tracability to MTC. Both ends to be suitably blanked.
(iii) Pipes shall be non-galvanised
(iv) Pipes to be externally coated with primer.
(v) Pipes should be suitable for hot bending, cold bending, machine bending & collar formation. If any defects arise during fabrication, the pipe length to be replaced free of cost. | 4,856 | meter | - | - |
| 4 | Pipe, Carbon Steel, 100 NB, 114.3 OD, Sch. 80, 8.56 mm thk., As per ASTM A 106 Gr. B & ANSI B 36.10. Seamless, Standard Length 6 Mtrs, +/-1 Mtrs Tolerance. All other dimensional tolerances shall be as per ANSI B 36.10.
To be supplied with
(i) MTC (Material, Dimensional & Testing).
(ii) Bearing heat marks on each length at one end with tracability to MTC. Both ends to be suitably blanked.
(iii) Pipes shall be non-galvanised
(iv) Pipes to be externally coated with primer.
(v) Pipes should be suitable for hot bending, cold bending, machine bending & collar formation. If any defects arise during fabrication, the pipe length to be replaced free of cost. | 750 | meter | - | - |
| 5 | Pipe, Carbon Steel, 125 NB, 141.3 OD, Sch. 40, 6.55 mm thk., As per ASTM A 106 Gr. B & ANSI B 36.10. Seamless, Standard Length 6 Mtrs, +/-1 Mtrs Tolerance. All other dimensional tolerances shall be as per ANSI B 36.10.
To be supplied with
(i) MTC (Material, Dimensional & Testing).
(ii) Bearing heat marks on each length at one end with tracability to MTC. Both ends to be suitably blanked.
(iii) Pipes shall be non-galvanised
(iv) Pipes to be externally coated with primer.
(v) Pipes should be suitable for hot bending, cold bending, machine bending & collar formation. If any defects arise during fabrication, the pipe length to be replaced free of cost. | 3,716 | meter | - | - |
| 6 | Pipe, Carbon Steel, 125 NB, 141.3 OD, Sch. 80, 9.53 mm thk., As per ASTM A 106 Gr. B & ANSI B 36.10. Seamless, Standard Length 6 Mtrs, +/-1 Mtrs Tolerance. All other dimensional tolerances shall be as per ANSI B 36.10.
To be supplied with
(i) MTC (Material, Dimensional & Testing).
(ii) Bearing heat marks on each length at one end with tracability to MTC. Both ends to be suitably blanked.
(iii) Pipes shall be non-galvanised
(iv) Pipes to be externally coated with primer.
(v) Pipes should be suitable for hot bending, cold bending, machine bending & collar formation. If any defects arise during fabrication, the pipe length to be replaced free of cost. | 1,080 | meter | - | - |
| 7 | Pipe, Carbon Steel, 15 NB, 21.3 OD, Sch. 40, 2.77 mm thk., As per ASTM A 106 Gr. B & ANSI B 36.10. Seamless, Standard Length 6 Mtrs, +/-1 Mtrs Tolerance. All other dimensional tolerances shall be as per ANSI B 36.10.
To be supplied with
(i) MTC (Material, Dimensional & Testing).
(ii) Bearing heat marks on each length at one end with tracability to MTC. Both ends to be suitably blanked.
(iii) Pipes shall be non-galvanised
(iv) Pipes to be externally coated with primer.
(v) Pipes should be suitable for hot bending, cold bending, machine bending & collar formation. If any defects arise during fabrication, the pipe length to be replaced free of cost. | 1,483 | meter | - | - |
| 8 | Pipe, Carbon Steel, 15 NB, 21.3 OD, Sch. 80, 3.73 mm thk., As per ASTM A 106 Gr. B & ANSI B 36.10. Seamless, Standard Length 6 Mtrs, +/-1 Mtrs Tolerance. All other dimensional tolerances shall be as per ANSI B 36.10.
To be supplied with
(i) MTC (Material, Dimensional & Testing).
(ii) Bearing heat marks on each length at one end with tracability to MTC. Both ends to be suitably blanked.
(iii) Pipes shall be non-galvanised
(iv) Pipes to be externally coated with primer.
(v) Pipes should be suitable for hot bending, cold bending, machine bending & collar formation. If any defects arise during fabrication, the pipe length to be replaced free of cost. | 250 | meter | - | - |
| 9 | Pipe, Carbon Steel, 150 NB, 168.3 OD, Sch. 40, 7.11 mm thk., As per ASTM A 106 Gr. B & ANSI B 36.10. Seamless, Standard Length 6 Mtrs, +/-1 Mtrs Tolerance. All other dimensional tolerances shall be as per ANSI B 36.10.
To be supplied with
(i) MTC (Material, Dimensional & Testing).
(ii) Bearing heat marks on each length at one end with tracability to MTC. Both ends to be suitably blanked.
(iii) Pipes shall be non-galvanised
(iv) Pipes to be externally coated with primer.
(v) Pipes should be suitable for hot bending, cold bending, machine bending & collar formation. If any defects arise during fabrication, the pipe length to be replaced free of cost. | 2,492 | meter | - | - |
| 10 | Pipe, Carbon Steel, 150 NB, 168.3 OD, Sch. 80, 10.97 mm thk., As per ASTM A 106 Gr. B & ANSI B 36.10. Seamless, Standard Length 6 Mtrs, +/-1 Mtrs Tolerance. All other dimensional tolerances shall be as per ANSI B 36.10.
To be supplied with
(i) MTC (Material, Dimensional & Testing).
(ii) Bearing heat marks on each length at one end with tracability to MTC. Both ends to be suitably blanked.
(iii) Pipes shall be non-galvanised
(iv) Pipes to be externally coated with primer.
(v) Pipes should be suitable for hot bending, cold bending, machine bending & collar formation. If any defects arise during fabrication, the pipe length to be replaced free of cost. | 284 | meter | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.72 MB
RateSheet.xls
Tender Documents • 0.06 MB
BOQ_110426.xls
BOQ • 0.38 MB
BOQ_110426.xls
BOQ • 0.38 MB
RateSheet.xls
Tender Documents • 0.06 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .