Construction of Specialy abled friendly Toilets and Ramps in Public Offices in Dasarahalli Zone

Construction of Specialy abled friendly Toilets and Ramps in Public Offices in Dasarahalli Zone

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) ( Pwd Sr 2023-24 Vol-02 Page No 9 Item No 5.4 )

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely finishing, including cost of materials, labour, curing as pe...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colou...

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle gre...

Providing and fixing of lowered ventilator made out of multi chambered UPVC (Matching to RAL 9016) sections and with minimum TiO2 (Titanium Dioxide) at 6PHR with TPE (Thermo Plastic Elastomer) and lea...

Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...

Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...

Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and sid...

Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing a...

Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. (vol-2 P.No. 105, I.No. 12.68.1 of PWP & IWTD SR 2023-24)

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. (vol-2 P.No. 105, I.No. 12.6...

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc...

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc...

Concealed Conduit System: Supplying heavy gauge PVC conduit pipe......mm dia..........mm thick confirming to IS2509 with suitable size nds, metal/PVC Junction boxes,adhesive paste etc., and running be...

Supplying heavy gauge PVC Conduit Pipe....dia.......mm thick with suitable size bends,metal junction box esadhesivepasteetc.,by groove cutting inthe wall and fixing by bracingUorJhooksandcement plaste...

Supplying and wiring adopting loop system in existing pvc conduit/casing caping using 1100v grade,COPPER conducter flexible multistrand FRLS PVC insulated, 2x1.5Sq.mm Cable confirming to the GTP witho...

Supplying and fixing PVC/metal conduit Deep junction box (P.No. 3, I.No. 1.5.2 of PWD Ele SR 2023-24 )

Supplying and flush mounting powder coated/galvanized metal box suitable for mounting modulars witch plates.The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall (P.N...

Supplying and flush mounting powder coated/galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall (P....

Wiring for lighting /power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in openor concealed system of wiring with specified IS...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (P.No. 9, I.No. 3.6.1 of PWD Ele SR 2023-24 )

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (P.No. 9, I.No. 3.6.1 of PWD Ele SR 2023-24 )

Supplying & fixing miniature circuit breakerson existing MCB distribution boards using necessary fixing material sand'C'Type curve, indicator ON/OFF,energy cross 3 with Short circuit breaking capacity...

Supplying & fixing miniature circuit breakerson existing MCB distribution boards using necessary fixing material sand'C'Type curve, indicator ON/OFF,energy cross 3 with Short circuit breaking capacity...

Supplying fixing and wiring earth leakage relay with core balanced current ransformer suitable for single phase 50Hz AC with latest micro controller based, digital readoutof percentage leakage current...

Supplying of recess mounting non integrated type LED downlight W luminaire comprising of pressure decast / extruded aluminium housing, with spring loaded false ceiling clamps, LED of Power /COB with C...

Fixing all type sand all capacities of fluorescent / falseceiling /spotlight/ CFL/ LED fittings indoor on the wall / ceiling/rafters/girdersusing23/0.0076"twin twistedPVC insulated wires, required Nos...

Supplying exhaust fan of 1440RPM of 300mm(12")size with bracket blades complete for light duty suitable to operateon 230V50Hz, AC Supply. (P.No.30, I.No. 6.1 of PWD Ele SR 2023-24 )

Cutting holes of required size in brick masonry wall for fixing of exhaust fan ncluding providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per dire...

Providing and fixing brass bib cock of approved quality : 20 mm nominal bore (P.No. 117, I.No. 13.2.2 of PWD SR 2023-24,Vol-II)

Providing and fixing brass stop cock of approved quality : 20 mm nominal bore(P.No. 117, I.No. 13.3.2 of PWD SR 2023-24,Vol-II)

Providing and fixing PTMT grating of approved quality and colour Circular type 100 mm nominal dia.(P.No. 120, I.No. 13.22.1.1of PWD SR 2023-24,Vol-II)

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of proved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete....

Constructing brick masonry chamber of internal dimension 600x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the wall...

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making ecessary holes for inlet, outlet and o...

Providing and laying 60mm thick factory made cement concrete paver block of proved shape and colour of M -30 grade made of C&D waste by block making achine with vibratory compaction laid in required ...

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...

Providing and fixing stainless steel ( Grade 304) railing made of ollowtubes, channels, plates etc., including welding, grinding, buffing, polishingand making curvature (wherever required) and fitting...

Providing and fixing (SWR) Pipes including all fittings this includes jointing of pipes & fittings with one step solvent cement trenching refilling & testing of joints complete as per the direction of...

Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/ Kankar/Moorum. (Tipper 14 m3) (P.No. 5, I.No.1.1 C of PWD SR 2023-24,Vol-III)

Cost of Haulage Excluding Loading and Unloading Taking output 25 t load and lead 10 km = 250 t.km (P.No. 5, I.No.1.4 C of PWD SR 2023-24,Vol-III)