PROVN / IMPROVEMENT OF JOINERY WORKS AND CERTAIN SANCTION WORK AT AF STN BIHTA

Amount

Excavation in trenches n. exc 1.5 m wide for foundations, laying cables/ pipes etc. not exceeding 1.5 m deep and getting out in SOFT/LOOSE soilcomplete, all as specified.

Excavation over area not exceeding 1.5 m deep and getting out in SOFT/LOOSE soilcomplete, all as specified.

Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete, all as specified.

Removing excavated spoil to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete, all as specified.

PCC type D-2 (1:4:8), using 40 mm graded stone aggregates as in filling & mass concrete, complete all as specified.

PCC type B-1 (1:2:4), using 20 mm graded stone aggregates as in roof kerbs or mud stops, rounded or chamfered on edge complete all as specified.

Reinforced cement concrete, type B-1,(1:2:4), (nominal mix) using 20 mm graded stone aggregates as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in kitchen shelves and the like complete all as specified.

Reinforced cement concrete, type B-1,(1:2:4), (nominal mix) using 20 mm graded stone aggregates as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in kitchen shelves and the like complete all as specified.

Precast reinforced cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in manhole cover slab, chullah hoods, chajjas, water troughs, mangers, shelves and the like duly placed on manholes with cement mortar (1:4) complete.

Brick work using bricks as specified in PS clause 5.1, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar (1:6), complete all as specified.

Use & waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or sloping) with rough finished flat surfaces of concrete, complete all as specified.

Use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. with rough finished surfaces of concrete, complete all as specified.

2nd class hard wood plain solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified.

Factory made 35 mm thick ,2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a);,etc complete all all as specified.

Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, thickness 30 mm,etc complete all all as specified.

Factory made solid PVC Door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with mild steel square tube, suppling & fixing in opening, complete all as specified.

Factory made Solid PVC Moulded door Shutteras with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2 mm thick 3D wood grain moulded PVC sheet polyurethane painted on the front face and 2 mm prelam PVC sheet on back face complete all as shown on drawing and as specified

Aluminium anodised barrel tower bolt of extruded section 150mm long, ISI marked, complete all as specified.

Stainless steel 75mm long butt hinges with stainless steel screws, ISI marked complete all as specified. MAKE: PRAYAG CAT PHW-36 or equivalent make mentioned in Appendix 'B'

Extruded aluminium anodised handles fabricated type with plate 100 mm long, ISI marked complete all as specified.

Hasp and staple, safety type, aluminium anodised including bolt to hinge plate and fixed with screws of size 100 mm, ISI marked complete all as specified.

Auto closing stainless steel (Grade-304) hinges 35mm of 0 crank (KH-001) or 8 crank (KH-002) ISI marked openeble at 110 degree for kitchen cabinet shutter complete

Stainless steel door mount door catcher /door magnet for cupboard wardrobe kitchen complete all as specified.

Aluminium anodised door mount, durable stylish, 8 pin heavy duty cltoth hanger, fixed inside rooms, kitchen, bathroom complete all as specified.

Stainless steel conduit 20 mm bore, cut to size and erected in position as curtain rod on backets, with & including SS decorative finials & brackets, PVC rings @ 10 nos. per metre, fixed to walls with PVC rawl plugs & SS screws,complete.

Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with tinned tacks or steel wire staples all as specified.

Framed mild steel work such as grills, grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-290-Gde E-165, complete all as specified.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

Powder coated aluminium (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. NOTES: - For powder coated aluminum sections minimum weight should not not be less than 1.25 Kg/m.

Powder coated aluminium window and ventilator shutters side hung type with aluminum section weighing 0.55 Kg/m, anodised alumnium glazing snap beading rubber neoprene packing including joining cleats & screws etc as per manufacturers instructions, complete all as specified. NOTES: - (a) Each shutter shall have 2 Nos. 125 mm long almn handles and 02 No. 75 mm size stainless steel/almn butt hinges & one no. almn hook & eye. (b) Glass and other filling materials in panels including wire cloth and almn grill shall be measured & paid for separately under respective item of BoQ. (c) For powder coated aluminum sections minimum thickness of powder coating shall be 50 micron.

18/19 mm thick High density moisture resistant board, flat pressed, fixed as in modular kitchen cabinets,cupboards or similar works with necessary screws, IN REPLACEMENT, complete.

Rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:4), complete all as specified.

Plain sheet glass 4mm thick ordinary quality and glazing with oil putty or wooden beads in squares n. exc. 0.5 Sq.m in each pane including hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified.

Plain sheet glass 4mm thick ordinary quality and glazing with oil putty or wooden beads in squares n. exc. 0.5 Sq.m in each pane i complete all as specified.

Applying two coats (ordinary tint) of synthetic enamel paint, including preparation of old painted wood and wood based surfaces of any description not other wise described over 10cm width or girth and complete all as specified.

Two coats of synthetic enamel paint over & including a coat of pink primer over wood and wood (new) based surfaces of any description not other wise described over 10cm width or girth including preparation of surfaces complete all as specified.

Applying two coats (ordinary tint) of synthetic enamel paint including peparation of old painted steel & iron surfaces of any description not other wise described over 10cm width or girth, complete all as specified.

Two coats of synthetic enamel paint over & including a coat of red oxide primer over steel & iron (new) surfaces of any description, not otherwise described, over 10 cm in width or girth, including preparation of surfaces complete all as specified.

Steel tubes 15 mm bore ‘medium grade’, galvanized with all fittings and fixed to walls and ceilings or laid in floors, including cutting holes to wall and making good as existing surfaces, complete all as specified.

Cutting existing steel tubing including screwing for making connection of GI tubing 15mm bore complete without taking down existing pipe complete all as specified.

Angular stop valve/cock, cast copper alloy, chromium plated, with wall flange, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, complete. MAKE: PRAYAG Cat No. 7510 or equivalent make mentioned in Appendix 'B'.

Bib tap, cast copper alloy, chromium plated fancy type, long body with wall flange, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, complete. MAKE: PRAYAG Cat No. 7508 or equivalent make mentioned in Appendix 'B'.

SS cockroach trap including grating without waste hole for bath outlet of floor trap with solvent and embedding in cement concrete type B-1 (1:2:4), IN REPLACEMENT, complete all as specified. MAKE: PRAYAG Cat No. PFT-3 or equivalent make mentioned in Appendix 'B'.

SS cockroach trap including grating with waste hole for bath outlet of floor trap with solvent and embedding in cement concrete type B-1 (1:2:4), IN REPLACEMENT, complete all as specified. MAKE: PRAYAG Cat No. PFT-9 or equivalent make mentioned in Appendix 'B'.

uPVC pipes, type-B, ISI marked (IS:13592) single socketed in any length with rubber ring joints, fixed under floors / fixed to wall as SWR pipes, complete all as specified of size: -

75 mm external dia pipe

110 mm external dia pipe

uPVC/PVC vent cowl 75-110 mm external dia, complete all as specified.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50 Sq.m each and removing from site all as specified.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 Sq.m but not exceeding 4.00 Sq.m each and removing from site all as specified.

Taking down shutters of any description not exceeding 1.00 sqm each and removing from site all as specified.

Note : Amount of credit for retrieved materials is mentioned in Sch of credit of tender documents in pdf form which will be deducted while acceptance of tender offline.

M/S Rohit Enterprises (BID ID -3202265)

MS JAGDAMBA ENTERPRISES (BID ID -3201339)

TRIBENI SINGH AND SONS (BID ID -3201508)

VISHNUDEO CONSTRUCTION (BID ID -3201346)

M/S SAMRAT TRADING AGENCY (BID ID -3201914)

Bikarma Enterprise (BID ID -3201502)

RADHESHYAM PASWAN (BID ID -3201920)