Loading
Loading…
Loading…
Tender Value
₹65.4 L
EMD Value
₹1.3 L
Closing Date
4 Aug 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
DRAWING
15 conditions · 3 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; where V= Advertised value of the tender in crores of Rupees. N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover.
Electrical License: The tenderer shall possess a valid Electrical Contractor License, issued by any State Government or Union Territory Administration, authorizing execution of electrical works up to 650 V. The contractor shall have in his employment or shall engage a person holding a valid certificate of competency issued by any State Government or Union Territory Administration for supervision of electrical works up to 650 V. Offers not accompanied by a valid Electrical Contractor License and requisite Supervisor competency for works up to 650 V shall be summarily rejected. Note: In case of expiry of validity of license during contract, the contractor should renew the license so that it is always valid during contract
Technical Eligibility Criteria: (a) The tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month before the one in which tender is invited: Three similar works costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works costing not less than the amount equal to 40% of advertised value of the tender, or One similar work costing not less than the amount equal to 60% of advertised value of the tender.
Definition of Similar nature of work:-Works of wiring/cabling or installation and commissioning of electrical items (other than on coaches) such as lights, fans, pumps, charging arrangements, earthing etc. (with or without supply of items / equipment) for 230V, 1phase or 415V, 3phase system or higher voltages".
9 conditions · 1 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderer /s are required to submit a scanned / attested copy of following information along with their tender- 1. Bank Account No 2. Name of Bank 3. Indian Financial System Code {IFSC} 4.PAN No 5. Tenderers Contact No Contractor should provide firms PAN, issued by Income Tax Department with his quote or within30 {Thirty} days of award of contract. No payment will be released without submission of PAN. All taxes including surcharge and cess shall be recovered from his payment as per tax provisions in vogue.
The tenderer shall thoroughly go through the entire tender document and strictly adhere the instructions and directions given at different pages.
It is responsibility of the tenderer that they ensure to see any corrigendum of the tender to check the corrigendum on the website from time to time.
All the required/supporting documents should be scanned and uploaded.
In case the date of closing mentioned in the Notice Inviting Tender is declared a holiday/bandh/strike etc. on any account, the date of closing tender online will not be changed as the application in the website of IREPS does not permit submission of any offer after closing date and time of the tender. However, opening of tenders online will be on any convenient day after the closing date/time of tenders.
Opening of e-tender online:- The e-tenders will be opened online using the IREPS portal. No representative is required to be present for opening of tender and taking notes of rates quoted and ranking as the complete details of rates etc. of all the bidders shall be available to the bidders in the website after the opening of the tender.
Nanded Division: Proposed construction of Balance RE works for handing over Except Track Portion (i.e.Trip Shed and Office building at Nanded Station)- Electrical Arrangements
NED-E-15-2026-27
NED-E-15-2026-27
Open
Works - General
12 Months
Nanded, Maharashtra
₹0
₹1.3 L
4 Aug 2026
14 Jul 2026
21 Jul 2026
205 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 65,35,335 | ||
| — | 100.00 | — | — | ||
| Supply, Laying, Testing and Termination of LTUG 4 core 25 sqmm XLPE insulated PVC sheathed Aluminiumarmoured cable as per IS 7098 (Part 1) 1988 with latest amendments and with necessary lugs and terminationscomplete. | — | — | — | 20,300 | |
| — | 100.00 | — | — | ||
| Supply, Laying, Testing and Termination of 1.1 KV Grade 4 core 50 sqmm XLPE insulated PVC sheathedAluminium armoured cable as per IS 7098(Part 1)1988 with latest amendments and with necessary lugs andterminations complete. | — | — | — | 34,100 | |
| — | 200.00 | — | — | ||
| Supply, Laying, Testing and Termination of 4 core 70 sqmm XLPE insulated underground armored aluminium cable with heat resistant insulation as per IS 7098(Part 1)1988 with latest amendments and with necessary lugs and terminations complete. | — | — | — | 1,04,600 | |
| — | 200.00 | — | — | ||
| Supply, Laying, Testing and Termination of 4 core 120 sqmm XLPE insulated underground armoured aluminium cable with heat resistant insulation as per IS 7098(Part 1)1988 with latest amendments with necessary lugs and terminations complete. | — | — | — | 1,69,600 | |
| — | 400.00 | — | — | ||
| Supply and Erection of HDPE pipe of 75 mm of PE-100, PN6 class as per IS 4984-2016 with latest amendments and with suitable couplings and clamps for cable laying with all necessary accessories complete. | — | — | — | 71,600 | |
| — | 200.00 | — | — | ||
| Supply and Erection of HDPE pipe of 50 mm outer dia of PE-100,PN6 class as per IS 4984-2016 with latest amendments and with suitable couplings and clamps for cable laying with all necessary accessories complete. | — | — | — | 15,800 | |
| — | 100.00 | — | — | ||
| Supply and Installation of 300mm x 50mm x 2mm thick GI perforated cable tray with cover along with required angle supports, with coupler plates, Anchor bolts and nuts etc complete and the tray should be fitted on the wall/ Ceiling etc. complete. | — | — | — | 65,208 | |
| — | 500.00 | — | — | ||
| Excavation of cable trench in hard soil of size of size 400mm wide x 1 mtr. deep, and making good of the same to its original form and shape after complete including all connected materials and works. | — | — | — | 72,000 | |
| — | 300.00 | — | — | ||
| Excavation of cable trench of size 400mm x 1 mtr deep track X-ing/Road X-ing and making good of the same to its original form and shape completely including all connected materials and works. | — | — | — | 1,13,400 | |
| — | 100.00 | — | — | ||
| Excavation of cable trench under the Track below 2mtrs. horizontal drilling bore with Hydraulic Jack suitable size for provision of 110/50mm dia GI/HDPE pipe. | — | — | — | 2,13,100 | |
| — | 10.00 | — | — | ||
| Supply and Erection of Power cable route indicators with all connected materials and works as per Drawing No.DEE/CN/BZA/2001/23. | — | — | — | 1,280 | |
| — | 2800.00 | — | — | ||
| Supply and laying of 8 SWG GI wire with 40GSM Zinc coated, conforming to IS:280- 2006 or latest, it is to be laid with armoured cable for earth continuity. | — | — | — | 33,600 | |
| — | 18.00 | — | — | ||
| Supply, Erection and connecting of SMC Junction Box of Size 700 x 480x 210 mm of Model No: GSJB 7450 ofSintex make or equivalent make for fixing of 4-Pole MCCB-63A and termination of 95 Sq.mm cable to extend supply to welding plants. (fixing should be required as per instruction of site supervisor). Suitable clamps for fixing (MS Clamps 02 Sets for each Box with necessary bolts and nuts as per site condition for GI channels/poles as per the directions of Site engineer. | — | — | — | 1,20,078 | |
| — | 6.00 | — | — | ||
| Supply, fixing and connecting of Cable Junction Boxes IP 55/IP 65 with metric knockouts for cable entry Cable junction boxes of model no. K 9504 of Hensel make conforming to IS:13573/92,IEC 60947-3 with its latest amendments, with necessary terminals suitable for cables up to 50 Sq mm and all necessary accessories complete. | — | — | — | 43,866 | |
| — | 100.00 | — | — | ||
| Supply and fixing of Junction box similar to Cat. No. D9045 of M/s Hensel Make or its equivalent Incl. fixing. | — | — | — | 35,000 | |
| — | 10.00 | — | — | ||
| Design, Supply, fixing connecting, testing and commissioning of Control Panel Unit containing 3 Nos. SMPS POWER SUPPLY UNITS enclosed in sheet steel enclosure with all connected safety accessories, Indications & Controls, dedicated for the High Power LED Based 16 W LED Pit/Catwalk Lights as per following Specification PANEL containing 3 nos of SMPS units, Each will be suitable for 7 Nos of Pit/Catwalk lights total 7x3=21 Nos of Pit/Walk lights) Specification for each SMPS Unit: Input Voltage: 180V to 260Volts, Output Voltage :24 Volts dc+/- 1% Regulation-C, Output Current: 10 Amps Each SMPS, Protection : Short Circuit Proof, Over Voltage Protection, Ripple: < 200mv including all accessories. Fixing, connecting, testing and commissioning of SMPS BASED Power supply units with all connected accessories including cable connectors etc. | — | — | — | 2,28,520 | |
| — | 300.00 | — | — | ||
| Supply and erection of CPVC pipe SDR-13.5 Pipe of size 32 mm (1 1/4 inch) as per IS 157778/8/2007 with its latest amendments, conduit pipe with all required accessories such as short/long bends, CPVC/PVC junction boxes including masonry work (chipping and making good) and labour charges etc. Make/Brand Sudhakar/Nandi/Godavari/Nagarjuna only. | — | — | — | 90,000 | |
| — | 580.00 | — | — | ||
| Supply and run of 2 nos, 4.0 sq.mm, 1100 V PVC (FRLS) insulated flexible copper conductor wires and one run of2.5 sq.mm PVC (FRLS) insulated flexible copper cable for earthing in existing PVC conduit pipe conforming to IS694 (2010) with latest amendments. | — | — | — | 88,160 | |
| — | 10.00 | — | — | ||
| Supply and fixing of Junction box similar to Cat. No. DK 1616 G of M/s Hensel or equivalent make. | — | — | — | 31,910 | |
| — | 400.00 | — | — | ||
| Supply, Laying, Testing and Termination of 1.1 KV Grade 4 core 16 sq.mm XLPE insulated PVC sheathed Aluminium armoured cable as per IS 7098(Part 1)1988 with latest amendments and with necessary lugs and terminations complete. | — | — | — | 56,400 | |
| — | 400.00 | — | — | ||
| Supply and Erection of HDPE pipe of 40 mm of PE 63 grade, PN8 as per IS 4984-2016 with latest amendments and with suitable couplings and clamps for cable laying with all necessary accessories complete. | — | — | — | 37,600 | |
| — | 6.00 | — | — | ||
| Supply, fixing, connecting and commissioning of SMC cable termination junction Box of size 340x200x105 with shock proof, rust proof, fire resistant, weather proof with IP65 protection suitable for termination of 2/4 core LTUG cables up to 240 sq.mm., 3 phase 415 volts including hylam sheet, heavy duty terminal connections, clamping arrangements etc. | — | — | — | 30,828 | |
| — | 260.00 | — | — | ||
| Supply and Running of 25 mm dia, Ivory coloured PVC conduit ( ISI marked) of wall thickness not less than 2mm along with junction boxes, bends and all accessories etc. as required as per site requirement. Running of conduit, fixing with suitable clamps and nuts in groove / open /shelter | — | — | — | 12,480 | |
| — | 300.00 | — | — | ||
| Cutting of groove in the wall, plastering of surface to the original for concealing of the conduit in the wall (Laying and fixing of conduit will be paid separately). | — | — | — | 12,300 | |
| — | 1000.00 | — | — | ||
| Supply and erection of 19mm size rigid conduit pipes of 2 mm thickness PVC pipe (ISI mark) concealed in wall with all required accessories conforming to IS 9537.3.1983 with its latest amendments , including masonry work and labour charges etc (For wiring points and wiring to switch boards) (for brick wall) along with accessories (bends, elbow, deep junction boxes(3 way, 4 Way) etc Make:Miraj,Prince,Sudhakar,Kankai,Captain. | — | — | — | 23,000 | |
| — | 143.00 | — | — | ||
| Supply and Laying of 25 mm FRPP corrugated Flexible conduit pipe as per standard specification. | — | — | — | 4,290 | |
| — | 143.00 | — | — | ||
| Provision of concealed wiring with two runs of 1.5 Sq.mm 1100 Volts and one run of flexible copper conductor 1.5Sq.mm 1100 Volts FRLS PVC insulated wires ISI marked (Phase, neutral and earth)( up to 10 meters length) in the PVC conduit pipe with 6A flush modular type switch including 2 way switches where ever required, ceiling rose, bulb holder and modular type plate cover to MS switch control box including all labour charges complete for light points, ceiling fans and exhaust fans points cat walk points and ioh service building points etc. accessories. | — | — | — | 94,952 | |
| — | 790.00 | — | — | ||
| Supply and run of 2 nos, 2.5 sqmm, 1100 V PVC (FRLS) insulated flexible copper conductor wires and one run of1.5 sqmm PVC (FRLS) insulated flexible copper cable for earthing in existing PVC conduit Pipe conforming to IS694 (2010) with latest amendments. | — | — | — | 79,790 | |
| — | 300.00 | — | — | ||
| Supply and run of 2 nos, 6.0 sqmm, 1100 V PVC (FRLS) insulated flexible copper conductor wires and one run of2.5 sqmm PVC (FRLS) insulated flexible copper cable for earthing in existing PVC conduit Pipe conforming to IS694 (2010) with latest amendments. | — | — | — | 53,700 | |
| — | 200.00 | — | — | ||
| Supply, running, Connecting of 1 core 10 Sqmm PVC heavy duty insulated multi stranded Copper conductor cable with necessary accessories like cable ties etc. IS 694 (2010) with latest amendments. | — | — | — | 26,000 | |
| — | 100.00 | — | — | ||
| Supply, running, Connecting of 1 core 4Sqmm FRLS, PVC insulated Copper conductor cable with necessary accessories like cable ties etc. IS 694 (2010) with latest amendments. | — | — | — | 3,800 | |
| — | 100.00 | — | — | ||
| Supply, running, Connecting of 1 core 6Sqmm FRLS, PVC insulated Copper conductor cable with necessary accessories like cable ties etc. IS 694 (2010) with latest amendments. | — | — | — | 6,100 | |
| — | 40.00 | — | — | ||
| Supply, fixing, connecting and commissioning of 6A 3pin/5pin modular plug socket, with 6A modular control switch on existing control board with wiring. | — | — | — | 13,880 | |
| — | 30.00 | — | — | ||
| Supply and fixing of 16 Amps 3/5 pin flush type power plug and socket with modular type switch control including all accessories. | — | — | — | 12,840 | |
| — | 15.00 | — | — | ||
| Supply and fixing of Angle Holder similar to model no. of AHLHXAW000 of Havells make or equivalent make with necessary screws and all accessories complete. | — | — | — | 1,050 | |
| — | 15.00 | — | — | ||
| Supply and fixing of Jumbo plate for Holder similar to model no. of ASSPGW002 of Havells or equivalent make with necessary screws and all accessories complete. | — | — | — | 345 | |
| — | 4.00 | — | — | ||
| Supply and fixing of surface mounting plastic gang box-12 module of model no:JS 12 008 of GM make or its equivalent with 12 module cover plate (With support frame) of model no:PK SB 12 007 - CASABLANCA of GM make or equivalent make comply with IEC 60669-1 with its latest amendments including all accessories complete. | — | — | — | 1,588 | |
| — | 6.00 | — | — | ||
| Supply and Fixing of Surface mounting plastic gang box-8 module of model no: JS 08 006 of GM make or equivalent with 8 module cover plate (With support frame) of model no: PK SB 08 011 - CASABLANCA of GM make or equivalent make comply with IEC 60669-1 with its latest amendments including all accessories complete. | — | — | — | 2,094 | |
| — | 10.00 | — | — | ||
| Supply and Fixing of metal flush box-3 module of model no: JM 03 002 of GM FOUR FIVE make or its equivalent make with 3 module cover plate (With support frame) of model no: PK SB 03 003 - CASABLANCA of GM make or equivalent modular make including all accessories complete. | — | — | — | 1,700 | |
| — | 4.00 | — | — | ||
| Supply and fixing of metal flush box-4 module of model no:JIM 04 003 of GM FOUR FIVE make or its equivalent with 4 module cover plate (With support frame) of model no:PK SB 04 004 - CASABLANCA of GM make ore quivalent make comply with IEC 60669-1 with its latest amendments including all accessories complete. | — | — | — | 880 | |
| — | 10.00 | — | — | ||
| Supply and fixing of metal flush box-6 module of model no:JIM 06 004 of GM FOUR FIVE make or its equivalent with 6 module cover plate (With support frame) of model no:PK SB 06 005 - CASABLANCA of GM make or equivalent make comply with IEC 60669-1 with its latest amendments including all accessories complete. | — | — | — | 2,650 | |
| — | 10.00 | — | — | ||
| Supply and Fixing of metal flush box-8 module of model no:JIM 08 005/6 of GM FOUR FIVE make or its equivalent with 8 module cover plate (With support frame) of model no:PK SB 08 011 - CASABLANCA of GM make or equivalent make comply with IEC 60669-1 with its latest amendments including all accessories complete. | — | — | — | 3,560 | |
| — | 14.00 | — | — | ||
| Supply and fixing of metal flush box-12 module of model no:JIM 12 008 of GM FOUR FIVE make or its equivalent with 12 module cover plate (With support frame) of model no:PK SB 12 007 - CASABLANCA of GM make or equivalent make comply with IEC 60669-1 with its latest amendments including all accessories complete. | — | — | — | 5,768 | |
| — | 20.00 | — | — | ||
| Supply and fixing of 10A SP 1 Modular mini MCB conforming to IS:13947, C" Curve Model No.AB 1 111 of GM make or it's equivalent in Module box including all accessories complete. | — | — | — | 6,680 | |
| — | 56.00 | — | — | ||
| Supply and Erection of Recess / Surface mounting 18 W LED Square panel lighter (22.5*22.5*2.0CM) as per attached railway specification with all connected accessories. | — | — | — | 42,896 | |
| — | 28.00 | — | — | ||
| Supply and fixing of 20W 4 feet LED tube light with all connected accessories complete for fixing (The supply includes accessories such as clamps, ties extension wires etc for fixing) as per attached railway specification | — | — | — | 10,780 | |
| — | 10.00 | — | — | ||
| Supply and fixing of 9W LED bulbs as per attached railway specification. | — | — | — | 1,560 | |
| — | 10.00 | — | — | ||
| Supply and Erection of energy efficient BLDC star electric ceiling fan of 1200mm sweep as per attached railway specification and including necessary plastering, masonry work and clamps nuts bolts etc. | — | — | — | 27,940 | |
| — | 6.00 | — | — | ||
| Supply and fixing of BLDC star 200 mm 20W 1600 RPM Exhaust fans including necessary plastering, masonry work and clamps nuts bolts etc. | — | — | — | 12,198 | |
| — | 8.00 | — | — | ||
| Supply and fixing of BLDC Air circulators 400 mm sweep with 1500 RPM 32W Equivalent to EFFICIO + model of Atomberg Make including necessary plastering, masonry work and clamps nuts bolts etc. | — | — | — | 38,016 | |
| — | 12.00 | — | — | ||
| Supply and fixing of 120W LED Flood light fitting with all connected materials complete as per attached railway specification. | — | — | — | 75,624 | |
| — | 100.00 | — | — | ||
| Supply and fixing of GI pipe 'B' class of size 6"dia with all other connected accessories with coupling complete asdesired by site engineer confirming to IS: 1239(Part-I)2004 with its latest amendments. | — | — | — | 1,11,200 | |
| — | 20.00 | — | — | ||
| Supply and fixing of B curve DP MCBs of 32 A with all connected accessories as per IEC 60898-1 with its latest amendments. | — | — | — | 14,020 | |
| — | 20.00 | — | — | ||
| Supply and Erection of B curve 16A DP MCBs of Rated Short-Circuit Breaking Capacity 10kA of IP 20 Protection as per IS/IEC 60898 - 1 with its latest amendments with all connected accessories. | — | — | — | 13,100 | |
| — | 10.00 | — | — | ||
| Supply and Erection of B curve 10A SP MCBs of Rated Short-Circuit Breaking Capacity 10kA of IP 20 Protection as per IS/IEC 60898 - 1 with its latest amendments including all connected accessories. | — | — | — | 2,270 | |
| — | 10.00 | — | — | ||
| Supply and Erection of B curve 16 SP MCBs of Rated Short-Circuit Breaking Capacity 10kA of IP 20 Protection as per IS/IEC 60898 - 1 with its latest amendments including all connected accessories. | — | — | — | 2,270 | |
| — | 10.00 | — | — | ||
| Supply and Erection of B curve 20A SP MCBs of Rated Short-Circuit Breaking Capacity 10kA of IP 20 Protection as per IS/IEC 60898 - 1 with its latest amendments including all connected accessories. | — | — | — | 2,270 | |
| — | 10.00 | — | — | ||
| Supply and Erection of B curve 32 SP MCBs of Rated Short-Circuit Breaking Capacity 10kA of IP 20 Protection as per IS/IEC 60898 - 1 with its latest amendments including all connected accessories. | — | — | — | 2,270 | |
| — | 10.00 | — | — | ||
| Supply, fixing and connecting of 2pole 2 module 32A Lexic RCBOs conforming to IS 12640-2(2008) with its latest amendments as advised by the site supervisor with all necessary accessories complete. | — | — | — | 33,570 | |
| — | 10.00 | — | — | ||
| Supply, fixing and connecting of 2pole 2 module 16A/25A Lexic RCBOs conforming to IS 12640-2(2008) with its latest amendments as advised by the site supervisor with all necessary accessories complete. | — | — | — | 33,570 | |
| — | 8.00 | — | — | ||
| Supply and fixing of 63 A 4P MCB C Curve, 10 KA capacity with necessary connections and all accessories complete. | — | — | — | 21,928 | |
| — | 8.00 | — | — | ||
| Supply and fixing of DP MCB enclosures model no.5077 91 of legrand make or its equivalent. | — | — | — | 5,704 | |
| — | 14.00 | — | — | ||
| Supply and fixing of FP MCB enclosures model no.5077 93 of legrand make or its equivalent. | — | — | — | 12,754 | |
| — | 4.00 | — | — | ||
| Supply and fixing and connecting P-17 Tempra plug and socket IK 08, of 16A, 2P+E - DP of model no.5078 60 of legrand make or equivalent as per IS/IEC 60309-1 (2002) with its latest amendments. | — | — | — | 15,000 | |
| — | 4.00 | — | — | ||
| Supply and fixing of C curve DP MCBs of 16/20/32 A with all connected accessories . | — | — | — | 3,448 | |
| — | 4.00 | — | — | ||
| Supply and fixing of C curve FP MCBs of 32 A with all connected accessories. | — | — | — | 8,624 | |
| — | 4.00 | — | — | ||
| Supply and fixing and connecting P-17 Tempra plug and socket IK 08, of 32A, 3P+E+ N -DP of model no. 507862 of legrand make or equivalent as per IS/IEC 60309-1 (2002) with its latest amendments. | — | — | — | 27,460 | |
| — | 10.00 | — | — | ||
| Supply and fixing and connecting P-17 Tempra plug and socket IK 08, of 63A, 3P+N+E -FP of model no.507864of legrand make or equivalent as per IS/IEC 60309-1 (2002) with its latest amendments. | — | — | — | 1,40,750 | |
| — | 12.00 | — | — | ||
| Excavation of earth for one pit in any soil and refilling as per Drg.NO. RE/33/P702/MOD.F | — | — | — | 3,900 | |
| — | 12.00 | — | — | ||
| Supply and erection of "B' class GI pipe dia 50mm, 3.1 mtrs length with 3.65 mm thickness including GI socket and nuts (3.1 mtrs ) including drilling of 12mm holes as per the RDSO Drg No. ETI/OHE/P/ 7021 (MOD.A) or if any latest. | — | — | — | 20,256 | |
| — | 12.00 | — | — | ||
| Drilling of 26 Nos of 12 mm dia holes on GI pipe dia 50 mm | — | — | — | 1,920 | |
| — | 12.00 | — | — | ||
| Supply and erection of Charcoal. | — | — | — | 132 | |
| — | 420.00 | — | — | ||
| Supply and erection of Salt. | — | — | — | 4,200 | |
| — | 12.00 | — | — | ||
| Supply and erection of pre fabricated RCC of size 0.55m X 0.55M(550mm) with wall thickness of0.125m(125mm) with height 0.3m (300mm) along with RCC(1:4:8) cover with .04m thickness(40mm)and funnel with ire mesh. (as per the Drg No.SC/E/SK-18/2004). | — | — | — | 10,308 | |
| — | 12.00 | — | — | ||
| Transportation charges including loading &unloading of earthing arrangements system material to site / location | — | — | — | 2,952 | |
| — | 2.00 | — | — | ||
| Supply erection, testing and commissioning of Maintenance free earthing similar to JEF ECOSAFE ,Pragati electrocom ltd, vijetha earthing etc., with earth electrode of low carbon steel rod of 3 mtrs long and 17.2mm dia with 250 Microns thick copper coating with 2 bags(each 10Kg) of LORESCO back fill compound with all necessary accessories complete according to IS 3093. | — | — | — | 28,282 | |
| — | 5.00 | — | — | ||
| "Supply, Transportation, Erection & commissioning of 5mtr long hot dip galvanized Octagonal pole (IS 875) with 130mm bottom A/F & 70mm top A/F made up of 3mm thick HT sheet (S 355 JO steel plate for shaft), along with base plate IS 2062 of size 200x200x12mm, M16x600 long J type EN8 grade foundation bolts, 1000mm long single/ Double arm bracket Including the Supply of Suitable bolts with Bakelite Sheet with MCB ( for mounting inside the base compartment of pole ) including Erection & commissioning of 5 mtr. octagonal pole including RCC concrete foundation & plinth in hard soil including excavation of soil, tamping of concrete, grounting and supply of other required materials and accessories complete." | — | — | — | 90,765 | |
| — | 5.00 | — | — | ||
| Service connection to the fitting from the junction box of 5 mtrs Octagonal pole by means of PVC insulated copper conductor of 3 core 1.5 Sq mm with necessary lugs at the junction box and necessary termination at the luminaire complete. | — | — | — | 1,805 | |
| — | 10.00 | — | — | ||
| Supply and fixing of LED street light fittings of 70W with suitable driver with all connected materials as per attached railway specification | — | — | — | 61,450 | |
| — | 8.00 | — | — | ||
| Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 10 ways (10 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB Make: Legrand/Havells/L&T | — | — | — | 12,984 | |
| — | 2.00 | — | — | ||
| Supplying and erecting triple pole and neutral distribution board (TPNDB) with door surface/flush mounted with 4 ways for incoming and 12 ways for outgoing SP/TP MCB's on iron frame/laminated board as per specification No. SWSWR/MCBDB Make: Legrand/Havells/L&T | — | — | — | 5,024 | |
| — | 1.00 | — | — | ||
| Supplying and erecting programmable digital almanac timer micro controller based with real time clock to operate on derived switching-ON & switching-OFF street light as per daily sunset and sunrise respectively automatically having 4 digit LED continuous time display, relay output230 V/10A with 10 hrs. battery backup and manual over drive facility capable to drive different capacity contactors timer erected in provided M.S. box in an approved manner. | — | — | — | 5,535 | |
| — | 40.00 | — | — | ||
| Supply and erection of LED High Bay light100Wconforming to specification no. with IP65protection including all necessary items for fixing in shed. Make:Philips/Bajaj/Havells or similar | — | — | — | 2,70,720 | |
| — | 2.00 | — | — | ||
| Supply, fixing testing and commissioning of 4 Pole MCCB 100A suitable for operation on 415V, 50 Hz 3Phase AC supply in LT Panel with supply of all connected accessories and allied materials as per specification attached. Make:L&T/Legrand/Havells Or Similar. | — | — | — | 6,932 | |
| — | 2.00 | — | — | ||
| Supply, fixing testing and commissioning of 4 Pole MCCB 63A suitable for operation on 415V, 50 Hz 3Phase AC supply in LT Panel with supply of all connected accessories and allied materials as per specification attached. Make:L&T/Legrand/Havells Or Similar. | — | — | — | 5,578 | |
| — | 2.00 | — | — | ||
| Supply, fixing and connecting of 4 pole 63A 100 mA Lexic RCBOs conforming to IEC 61009-1 as advised by the site supervisor with all necessary accessories complete | — | — | — | 17,142 | |
| — | 4.00 | — | — | ||
| Supply, fixing and connecting of 750 mm (30") sweep wall mounting air circulator with all connected accessories. Make :Crompton/Havells/Bajaj/ Usha only. | — | — | — | 32,056 | |
| — | 1.00 | — | — | ||
| Supply & fixing testing and commissioning of 200A on-load change over switch suitable to operate on415V, 50Hzconforms to IS:13947-3 with sheet steel enclosure front handle operated. Make:L&T/Legrand/Havells or Similar | — | — | — | 22,265 | |
| — | 200.00 | — | — | ||
| Providing and fixing sheet metal work in CRCA sheet with fabrication of boxes panel boards etc. including cutting, bending, drilling,welding, riveting etc.treated with anti-rust treatment and duly power coated as per the above specification. | — | — | — | 49,800 | |
| — | 40.00 | — | — | ||
| Supplying and erecting of50 mm x 5 mm size electrolyte copper patti or bar in bus bar chamber / in panel or any other purpose,500 V with require capacity with 99.9% copper purity with fixing arrangement(like lug or bottle type lug)to both the end with high grade poly olefin insulation sleeve complete | — | — | — | 45,200 | |
| — | 2.00 | — | — | ||
| Supply, fixing, testing and commissioning of Microprocessor Release 100-250A range; 4 Pole, MCCB in LT Panel with supply of all connected accessories and allied materials as per specification attached.Make:L&T/Legrand/Havells. | — | — | — | 72,836 | |
| — | 1.00 | — | — | ||
| Supplying and erecting LTCT multi function DLMS compliance energy meter of accuracy of class 0.5with optical & RS 232 port,backlit LCD, measures &displays tri vector energy,load survey, TOD, tamper detection & logging, power ON /OFF events,instantaneous parameters of rating 1/5 A with display in absence of power complete with zero adjustment & test certificate from manufacturer erected on provided M.S. box and connected to CTs suitable for 3x240V,50 Hz. | — | — | — | 8,137 | |
| — | 6.00 | — | — | ||
| Supplying and erecting LT current transformer with bar primary 50/5 to 1000/5ratio with 15 VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates. | — | — | — | 5,268 | |
| — | 2.00 | — | — | ||
| Supplying and erecting panel mounting type digital ammeter having three and half digit LED display,external CT operated,calibrated for 0 to 1000AAC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer suitable to operate on 500V. | — | — | — | 2,722 | |
| — | 2.00 | — | — | ||
| Supplying and erecting panel mounting type digital voltmeter having Three and half digit LED display,calibrated for 0-750V AC suitable to operate on 500VAC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer suitable to operate on 500V. | — | — | — | 2,610 | |
| — | 2.00 | — | — | ||
| Supplying and erecting selector switch suitable for voltmeter/ammeter for 3phase AC supply500/1000V, 50Hz, on provided box / panel and duly connecting with necessary PVC wire leads and lugs. | — | — | — | 640 | |
| — | 2.00 | — | — | ||
| Supply & provision of 3 Nos RYB indication lamps of LED type including with all connected accessories complete. | — | — | — | 876 | |
| — | 3.00 | — | — | ||
| Supply, erection, testing and commissioning of all material, excavation, and casting of cement concrete foundation/concreting in ratio 1:3:6 | — | — | — | 18,021 | |
| — | 1500.00 | — | — | ||
| Supply and laying of 4 core240 sq mm cross linked polyethylene (XLPE)insulated LT UG cable, PVC outer sheathed, armoured with galvanized round steel wire or steel strip and with aluminum conductor suitable for rated voltage at1100 volts grade and conforming to IS:7098(Part- 1)/1988 with amdt.no. 1, 2 & 3 (reaffirmed2005) or latest. | — | — | — | 22,53,000 | |
| — | 1500.00 | — | — | ||
| Supply and erection of110mm HDPE pipe of Grade PE-100. PN 6(6Kg/Cm2 Capacity) with accessories as per IS 4984-2016 (SDR-21) | — | — | — | 5,34,000 | |
| — | 100.00 | — | — | ||
| Supply of 16W 3directional LED Pit Light fitting with IP67 Protection(10W+4W+2W) aluminium die cast with IP67 Protection as per specification. . Note Prier Approval to betaken including all accessories. | — | — | — | 2,20,400 | |
| — | 100.00 | — | — | ||
| Erection of 16W 3directional LED Pit Light fitting with IP67Protection(10W+4W+2W) aluminium die cast withIP67 Protection as per specification. . Note Prior Approval to betaken including all accessories. | — | — | — | 12,000 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Earth Pit Specification
ATTACHMENT
RitesInspectionLetter.pdf
ATTACHMENT
TenderNo.NED-E-15-2026-27TripShed.pdf
ATTACHMENT
GCC-2022.pdf
ATTACHMENT
GCCCorrectionSlips1to11_compressed.pdf
ATTACHMENT
TechCircular05-2022provisionofearthelectrodesearthing3_compressed.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .