Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.3 LAccepted-AOC AZARA GUWAHATI DIST KAMRUP M ASSAM 781 017 | KAMRUP METRO | ASSAM | 781017 | L1 | Accepted-AOC Lowest Bid | |
| 2 | L2₹13.8 L+₹1.3 L (10.2%)Rejected-Finance MIRZAPUR PO PS AZARA KAMRUP M ASSAM 781 017 | KAMRUP METRO | ASSAM | 781017 | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹15.2 L+₹2.7 L (21.5%)Rejected-Finance SHREE KUNJ HOUSE NO 22B JIBAN KRISHNA PATH NEAR L P SCHOOL HENGRABARI GUWAHATI PIN 781036 | GUWAHATI | KAMRUP | ASSAM | 781036 | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹15.3 L+₹2.7 L (21.9%)Rejected-Finance NOT AVAILABLE | L4 | Rejected-Finance Other than L1 | |
| 5 | L5₹16.2 L+₹3.6 L (29.0%)Rejected-Finance VILL POST AZARA DIST KAMRUP METRO GUWAHATI ASSAM 781017 | KAMRUP METRO | ASSAM | 781017 | L5 | Rejected-Finance Other than L1 |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
3 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Borjhar
Garrison Engineer (AF) Borjhar, Military Engineer Services, Guwahati Airport- PO, Borjhar Airport, Guwahati, Assam, Pin- 781015 Tele 0361 - 2840127
Comprehensive maint works for Billets and MESS of 19 Wing AF under GE(AF) Borjhar
2022_MES_543660_1
8294/BOR/E8
Open Tender
Civil Works
Item Rate
180 days
GE (AF) Borjhar
MES Contractor enlisted as Class E category a(i) having deposited Standing Security of Rs 50000.00 with dept. Contractors not enlisted in MES should meet the MES enlistment criteria corresponding to appropriate class and category
7 documents required · 7 mandatory
₹500
Yes
GE (AF) Borjhar
₹40,000
Yes
20 Dec 2022
5 Aug 2022
5 Sept 2022
5 Aug 2022
3 Sept 2022
20 Aug 2022
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and as directed.
Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and as directed.
Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc, complete all as specified and as directed.
Demolition of plain cement concrete in ground floor and pavings not exc 15 cm thick (below or above ground level) including floor tiles of any description, complete all as specified and as directed.
Demolition of concrete of any description & in any position not other wise specially provided for, complete all as specified and as directed.
M&L for PCC (1:3:6) type C2 using 40 mm graded crushed stone aggregate as in ssurface channel & drains., complete all as specified and as directed.
M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement, including forms, moulds, mitred/ stopped end etc, complete all as specified and as directed.
M&L for 75 mm thick PCC (1:3:6) type C2 using 40 mm graded crushed stone aggregate as in plinth protection, surface finished fair and even, without using extra cement. complete, all as specified and as directed.
M&L for brick work with old size sub-class ‘B’ bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar (1:6), complete all as specified and as directed.
M&L for rendering 15mm thick in cement mortar (1:6) on surfaces other than fair face of brick work of walls, finished even & smooth without using extra cement, complete all as specified and as directed.
M&L for rendering 15mm thick in cement mortar 1:4 on fair face of brick work of walls, mixed with water proofing compound (ISI marked) @ 3% by weight of cement or as per manufacturer’s instructions, finished even & smooth without using extra cement, complete, all as specified and as directed . Note : Water proofing compound shall be measured and paid for separately.
Supply only integral water proofing compound (ISI marked) as directed.
M&L for plain cement concrete (1:2:4) type B1, using 20 mm graded crushed stone aggregate as in coping, benching including necessary form work, complete, all as specified and as directed.
M&L for non skid ceramic coloured tiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sq.m but not exceeding 0.18 sq.m as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.
M&L for glazed ceramic coloured tiles (coloured)of size 350mm x 250mmx6-7mm /450x 350x6 to 7mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10mm thick rendering (as screed bed) in cement mortar (1:4) complete all as specified and as directed.
M&L for vitrified ceramic coloured tiles 10mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sq.m, as in floors, skirting, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick screed bed in cement mortar (1:6) complete, all as specified and as directed.
M&L for factory made 60-80mm thick machine pressed precast cement concrete coloured interlocking paver blocks of Grade M-35 conforming to IS 15658-2006 of shape and size as directed with grey cement and pigment laid over and including 50mm thick sand cushioning, joints of blocks filled with dry sand and compacted with mechanical vibrator, complete all as specified and as directed.
M&L for 50mm th sand cushioning, joiint of block filling with dry sand and complete witn machancical vibrator complete all as specified and as directed.
M&L for Prepolished designed and coloured chequered cement concrete tiles with grey cement & pigment of size 30cm x 30cm x 22 to 25mm thick, set & jointed with cement slurry over and including 15mm thick bedding layer of cement mortar (1:6) and pointed with grey cement complete all as specified and as directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards / slabs / blankets any thickness, including cover fillets, complete all as specified and as directed.
M&L for Provision of 4 mm thick non asbestos fibre cement ceiling board (Self Designed board) fixed with & including Aluminium Snap grid Frame work(600 x 600 mm) complete all as specified and as directed.
Dismantling AC sheet (Corrugated, Semi corrugated etc) as in roofs, etc. including ridges complete all as specified and as directed.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed .
S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed .
M&L for preparation of old painted plastered surfaces of any description over 10cm in width or girth and applying one coat of priming paints over one coat of plastic emulsion paint of approved shade/tint complete all as specified and as directed.
M&L for preparation of new plastered surfaces of walls and applying finished smooth coat of 3 mm thick white wall care putty to wall or ceiling surfaces, complete all as specified and as directed.
M&L for preparation of old decorated surfaces of walls by washing, rubbing down and stopping of distempered surfaces and applying one coat of oil emulsion distemper (OBD) of approved shade/tint complete all as specified and as directed.
M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint of approved shade/tint over a coat of chalk whiting, complete all as specified and as directed.
M&L for preparation of old decorated plastered surfaces of walls and applying one coat of cement base paint of approved shade/tint, complete all as specified and as directed.
M&L for preparation of old decorated external surfaces of wall, fascia, vertical and horrizontal surfaces of roof projection, chajja etc and applying two coat of weather coat (smooth classic, any colour as directed) with anti fungal exterior coating weather proof emulsion paint in camouflage pattern , complete all as specified and as directed.
M&L for preparation of old painted surfaces of wood and wood based material of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint complete all as specified and as directed.
M&L for preparation of old painted steel and iron surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint, complete all as specified and as directed.
M&L for preparation of old surfaces (plastered or unplastered) of ceiling including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of white wash, complete all as specified and as directed.
S&F in repairs looking Mirror of size 600 mm x 450mm fixed on wall with 6 mm thick pliwood backing fixed with brass screws complete all as specified and as directed.
S&F in repairs sheet glass shelf assembly with chromium plated bracket guard and railing fixed on wall with PVC rawl plug 12cm wide & chromium plated brass screws complete all as specified and as directed.
S&F in repairs tubular towel rail, aluminium anodized, 20mm dia, ‘D’ type, 60cm long between flanges, fixed to PVC rawl plugs with chromium plated brass screws, complete all as specified & directed. Make: Cera Cat No. 101 or equivalent model from make as per list of make attached in Particular specification.
S&F in repairs vitreous china wash hand basin, white, flat back of size 550mm x 400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug) complete all as specified and as directed.
S&F in repairs vitreous china urinal, full stall type, white including providing & fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with & including 60 mm long brass screws, pointing around urinal back in cement, with & including PTMT grating and union for discharge pipe including waste pipe of polythelene of low or high density or PVC 32mm dia complete all as specified and as directed.
S&F in repairs vitreous china wash down water closet pan (Pedestal pattern), white, including connection to drain (or outgoing pipe) and to flushing pipe, anti-sypohonage pipe etc., with plastic WC seat cover (white) closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device complete all as specified and as directed.
S&F in repairs waste coupling of PTMT (half or full threaded) suitable for WHB/Sink, bore dia of discharge pipe 32mm (Minimum weight 45gms) complete all as specified and as directed.
S&F in repairs PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle complete all as specified and as directed.
S&F in repairs 15mm bore Stop valve, cast copper alloy, fancy type chromium plated, screwed down, high pressure with capstan heads, screwed both ends for iron pipe or for union complete all as specified and as directed.
S&F in repairs 15 mm bore bib tap, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.
S&F in repairs 15mm bore fancy type pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks & fly nuts, screwed for iron pipes complete all as specified and as directed.
S&F in repair for Brass chromium plated shower rose 125mm size with arm 15 mm bore complete all as specified and as directed.
Taking up or down steel water tubing and connections of 15mm bore, fixed in walls, ceiling, floors, trenches etc. complete all as specified and as directed.
M&L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings and fixed complete to walls and ceillings or laid in floors complete all as specified and as directed.
M&L reparing of RCC projection chajja, roof, roof facia, celing by scrapping, cutting derusting and cleaning exposed reinforcement surface of damaged loose RCC surface and applying neat cement slurry @3 Kg/Sqm and filling the surface with cement plaster (1:3), one or two layers as reqd or PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) and smooth edges including two coats of finished to mathch with the existing surface at any height and any height and in any situation including necessary form work complete all as specified and as directed.
S&F solid PVC door frame of size 50mm x 47mm made out of 5 mm wood grain printed PVC sheet reinforced with MS square tube and edgeswill be painted to match will printed sheet fixed in opening as per specification & drawings complete all as specified and as directed.
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed.
Taking down aluminium window frame with shutters (Without taking off shutters from frame) n exc 1.5 Sqm each complete all as specified and as directed.
Taking down aluminium door frame with shutters (Without taking off shutters from frame) exc 1.5 Sq.m n. exc 4.00 sq.m each complete all as specified and as directed.
S&F aluminium anodised powder coated frame for doors, windows, ventilators of any colour as approved (Thickness or powder coating not less than 50 micron) with one or more rebates including joining cleat, etc for fixing etc. complete all as specified and as directed.
S&F aluminium anodised powder coated door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified and as directed.
S&F aluminium anodised powder coated window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21, 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.
S&F anodised aluminum Grill made of 5 mm dia aluminum bars, size of mesh 50 mm by 50 mm fixed together with aluminum frame of size 40mm by10mm by 1.9 mm thick for aluminum window complete all as specified and as directed.
S&F 5.5mm thick sheet glass, ordinary quality, glazing with oil putty or with wooden beads, area exceeding 0.50 Sqm but not exceeding 1.0 Sqm each pane with and including solar control film 50 micron reflective type (greater sun control or equivalent) complete all as specified and as directed.
S&F 4mm thick tinted coloured glass, with oil putty in square in not exc 0.5 sq.m in each pane complete all as specified and as directed
Taking down chowkhat or frame (without taking off shutter from the frame) not exceeding 1.5 Sq.m each, removing from the site including cutting holes required for taking out existing hold fast etc. complete all as specified and as directed.
Supply & Fixing 2nd class hard wood plain, soild straight chowkats and frames of wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.
S&F for 30 mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides and fitted to chowkhats complete all as specified and as directed.
S&F Mild Steel Butt hinges, medioum weight, cold rolled, of size 100mm complete all as specified and as directed.
S&F 150 mm long mild steel barrel tower bolt, stove enameled black with bright bolt complete all as specified and as directed.
S&F Mild steel pressed handle, oval type, stove enameled black, 150 mm size complete all as specified and as directed.
S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed length of bolt 250 mm complete all as specified and as directed.
S&F Aluminium handle, cast type anodized size of handle 150 mm complete all as specified and as directed.
S&F Aluminium anodized, barrel tower bolt of extruded section, length of bolt 150 mm complete all as specified and as directed.
S&F Floor door stopper of aluminium alloy body and tongue, overall length of cover plate 150 mm , anodized, with hard drawn steel spring, fixed to shutters complete all as specified and as directed.
S&F aluminium body hydraulically Door closer regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed as in repairs complete all as specified and as directed.
S&F in repairs mild steel decorative and colour coated curtain rail, 20mm bore complete all as specified and as directed.
S&F Brackets decorative and colour coated suitable for 20mm bore complete all as specified and as directed.
S&F in repairs Toilet paper holder, viperous china box type complete all as specified and as directed
S&F in repairs sink with drainage board made of stainless steel 1mm thick for kitchen with plugs, washers and wastes, including fixing with cast iron cantilever brackets, bedding in cement mortar on to dwarf wall, connecting union to pipe, overall minimum size 915mm x 460 mm with bowl size 410mm x 330mm x160 mm including 32mm dia waste pipe of polythelene of low or high density, 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM (1:3) or PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) complete including taking down old unserviceable sink complete all as specified and as directed.
S&F in repairs in repairs Grating doom 125mm dia with waste hole of PTMT and CP complete all as specified & directed (Minium weight 40 gm) complete all as specified and as directed.
S&F in repairs stainless steel plate rack for kitchen utensil out of .63mm thick sheet of size 600 x 750 x 250 mm fixed to wall with screws complete all as specified and as directed.
S&F for Plain, framed, panelled shutters 35mm thick (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face eneers: supplied and fitted to frame complete all as specified and as sdirected.
S&F Glazed and skelton door shutters, 30mm thick of Second class hard wood open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass, etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24(a) ) complete all as specified and as directed.
S&F Glazed and skelton window shutters, 30mm thick of Second class hard wood open rebated and prepared to receive glass, gauge etc divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass, etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24(a) ) complete all as specified and as directed.
Taking down Soil waste pipe/vent pipe of any description complete all as specified and as directed.
S&F for PVC (SWR) pipe siongle socketed with rubber ring joints fixed in wall / floor or laid in tranches 75mm bore complete all as specified and as directed.
S&F for PVC (SWR) pipe siongle socketed with rubber ring joints fixed in wall / floor or laid in tranches 110mm bore complete all as specified and as directed.
M/s Kajal Das
M/S PRASANTA MAHANTA
M/s A R Traders
M/S Kiran Chandra Das
M/s Rawat Enterprises
RIPAN BARUAH
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .