REPAIR/ REPLACEMENT OF ROOF PLASTER JOINERY, PLUMBING AND ALLIED WORKS AT DTF, VTF, 416 ENGR BD, ICC UNIT , 32 MVH ADJACENT AREA UNDER AGE B/R - II OF GE (NORTH) MEERUT CANTT

Amount

Taking down shutter of any description exc 1sqm but n.exc 2 sqm each complete all as specified and directed.

Taking down chowkhat with shutters( without taking of shutter from the frames) not exc 1.5sqm each complete all as specified and directed. Note- Disturbed suface of wall shall be made good to true suface

Taking down chowkhat with shutters (without taking off shutters from the frame) exc 1.5sqm but n.exc 4 sqm each complete all as specified and directed. Note- Disturbed suface of wall shall be made good to true suface

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable to store and rubbish off the premises complete all as specified and directed.

Demolition of brick work or stone boulders masonry built in cement mortar including all quoins aches pillars etc but excluding ashlar facing also ssed stone work complete all as specified and directed.

Demolition of cement concrete (unrainforced) in ground floors and paving n.exc 15cm thickness (below or above grond level) complete all as specified and directed.

Dismantling AC sheet corrugated or semi corrugated sheet inc. ridges of any description as in roof and including removal from the site complete all as specified and directed.

Demolition wall and ceiling boards (fibre,pulpinsulation etc) or insulation boards /slabs/blankets any thickness including cover fillets complete all as specified and directed.

Taking down of cement or cement lime plaster/skirting/ dado of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Hacking out old broken glass (any thickness size quality or description) from wooden frames or stone, concrete or brick surroundds glazed with putty or fixed with bead complete all as specified and directed.

S&F 3mm thick sheet glass, ordinary quality glazing with oil putty or fixed with wooden beads in square nexc 0.50 sqm each pane complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surface in cement mortar 1:6 finished even and smooth with out using extra cement complete all as specified and directed.

M&L applying 10 mm thick rendering on ceiling in cement mortar 1:3 finished even and smooth with out using extra cement complete all as specified and directed.

M&L for applying 15mm thick in CM 1:4 rendering using ready mix plaster bags on brick/concrete suface of extenal wall finished even and fair complete all as specified and directed. Make : Ultratech, rediplast, Birla Acrocem. Note Contractor is required to deposit ready mix bags for 100% CA quanitity to Engr-in-charge with in 15 days of acceptance of contract.

M&L for preparation of old/new plastered suface of wall and applying two coats of Acrylic exterier Emulsion paint using rollex for painting complete all as specified and directed.

M&L for preparation of old/new plastered suface of wall and applying two coats of oil bound distemper using roller for painting complete all as specified and directed.

M& L for preparing of new/old plastered suface of ceiling and applying two coats of white wash on ceilling complete all as specified and directed.

S&F 35mm thick plain framed , panelled shutters(any number of pandls) with panels of timber that on both sides( feather edged) or of veneered particle board medium density ,wood particle board with commercial face veneers complete all as specified and directed.

S&F 35m thick glazed and skeleton shutter open rebated and prepared to receive glass gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass/gauze etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) of IInd class hard wood complete all as specified and directed.

S&F steel windows with pressed steel frame made out form 1.25mm thick steel with one or more rebate with glazed shutters and ply proofing shutters including guard bars, hings peg stay handles tower bolts lugs including treated with for or coal tar black paint on steel surface in contact/embedded in concrete/masonry work complete all as specified and directed. Note- Disturbed suface of wall shall be made good to true suface

S&F steel ventilator with tap hung shutter including hinges steel peg stay complete all as specified and directed. Note- Disturbed suface of wall shall be made good to true suface

S&F powder coating anodised aluminium frame for doors windows ventilaters with one or more repates including joining cleat for fixing etc complete all as specified and directed.

S&F anodised aluminium door shutters aluminium sectioin weighing .55kg/m including necessory joining cleats ,glazing clips, rubber neoprene packing handles 2 nos in each door, hinges anodised aluminium snap beading screws etc complete all as specified and directed.

S&F anodised powder coated anodised aluminium window and ventilater shutters fixed type with out sash bar aluminium section weighing .55 kg/m including necessary joining cleat , glazing clips rubber packing anodised aluminium snap beading screws etc complete all as specified and directed.

S&F 4.8mm thickness sheet glass ordinary quality and glazing with oil putty in square n.exc .5sqm in each pane complete all as specified and directed.

Ditto- but exc 0.5 sqm in each pane complete all as specified and directed.

S&F door closer hydraulically aluminium (extruded section paty) designation No3, universal type suitable for door shitter of 851 to 1000 mm in width and of weight between 61 to 80kg complete all as specified and directed.

S&F in repair mild steel wire cloth, 0.36 mm nominal dia. of wire and avg width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F 30mm thick factory made solid panel PVC door shutter (style) consisting of frame made out of M.S tubes for tap & bottom rail MS frame shall be covered with head moulded plain colours complete all as specified and directed.

S&F solid PVC door frame of size 50mmX47mm made out of 5mm plain colour PVC sheet rainforced with MS square tube complete all as specified and directed.

S&F 100mm size butt hinges medium weight cold rolled mild steel complete all as specified and directed.

S&F 300mm length of bolt mild steel door bolt , plate type , stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 3 bolts and nuts for on bolt plate and two on staple plate complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.63 mm nominal dia. of wire and avg width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire stples complete all as specified and directed.

S&F aluminium anodised 150mm length of bolt borrel tower bolt of extruded section complete all as specified and directed.

S&F 125mm size of aluminium handles cast type anodosed complete all as specified and directed.

S&F Brass chromium plated tubular towel rail 20mm dia , D type 60mmlong between flanges complete all as specified and directed.

M&L for reparation of new wooden surface and applying two coat of synthetic enamal paint over a coat of pink primer over 10CM width or girth complete all as specified and directed.

M&L for reparation of old wooden surfaces and applying one coat of synthetic enamal paint 10CM width and girth complete all as specified and directed.

M&L for reparation of new steel suface and applying two cat of synthetic enamal paint over a coat of red oxide over 10CMwidth and girth complete all as specified and directed.

M&L for repration of old steel surfaces and applyuiing one coat of synthtic enamel paint over 10cm width and girth complete all as specified and directed.

S&F size of grid 605X605mm anodised aluminium snap grid frame work for false ceiling complete all as specified and directed.

S&F 4mm thick non asbestos fibre cement building boards fixed or laid /inserted to timber /GI/aluminium frame work with screws complete all as specified and directed.

S&F 18/19 mm thick prelaminated particle board ,interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination , fixed with secrews t timber frame and 5mm thick teak wood beads all round to prelaminated boards including piano type hinges complete all as specified and directed.

S&F Fe - 290 (Gde E- 165) for Framed work as in doors , chowkhats or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, support to velley gutters, winties for roof sheets, framing for monkey proofing, welded mesh of pitch as decided by engg-in-charge, support to sign board & fencing post, etc. as specified to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

S & F Rolled sections Fe 410 -W (grade E-250) quality A as in main and cross beams, base plates, side supports, hip and jack rafters; purlins, winties where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting member as directed and specified and directed by by Engr - in- charge.

M&L granite(of any type) tiles 20mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with ad mixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

Providing 15mm thick cement concrete type C-2 1:3:6(40mm graded aggregate) for plinth protection complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS : 15658-2006 of 60mm thickness M-35 grade grey cement and no pigments over 50mm thick compecte sand cushion complete all as specified and directed.

M&L for 75mm thick plain cement concrete type B-2 1:2:4(40mm graded crushed stone aggregate) as in sub base complete all as specified and directed.

S&F in repair 15mm dia pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with or with out lettered 'Hot or 'cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

S&F in repair 15mm dia brass C.P mixer for mixing hot and cold water screwed down for iron pipe complete all as specified and directed.

S&F in repair 15mm bore stop valves cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repairs 15mm Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified.

Ditto all as above item No 53 but 20mm bore complete all as specified and directed.

S&F in repairs CP bib tap 15mm bore cast copper alloy with crutch butterfly handle, screwed down and screwed for iron pipe or for brass ferrule and fixed as specified and directed.

S & F in repair 15 mm bore bib taps standard of PTMT any colour high pressure screwed for iron pipe or for brass ferrule complete all as specified and directed. (Min weight 15mm - 90gms)

S&F in repairs 20mm bore bib tap cast iron with , screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs 15mm bore pillar taps of PTMT any colour high press ure screwed for iron pipe complete all as specified and directed.(minimum wt 20mm-92grms)

S&F in repair 15mm bore angle stop valve of PTMT any colour high pressure screwed for iron pipe complete all as specified and directed.(minimum wt 15mm-90grms)

S&F in repairs 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium red & high density plastic ball screwed for iron pipe complete all as specified and directed.(minimum wt 20mm-210grms)

S&F in repair grating doom 125mm dia with waste holes of PTMT complete all as specified and directed.(minimum wt 40 grms)

S&F in repairs towel ring of PTMT fixed with and including C.P brass screwes and wooden /plastic cleat complete all as specified and directed.(minimum wt 90 grms)

S&F in repair PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F PVC(SRW)75mm floor trap,plain with grating including jointing with solvent cement complete all as specified and directed.

Taking up or down steel tubing 15mm and connection including cleaning for refixing or remoal to store complete all as specified and directed.

Ditto as per item No 65.00 above but 20mm tube complete all as specified and directed.

Ditto as per item No 65.00 above but 25mm tube complete all as specified and directed.

S&F 15mm GI tube medium grade galvnised with all fittings laid on trenches and wall complete all as specified and directed.

Ditto all as above item No 68 but 20mm tube complete all as specified and directed.

Ditto all as above item No 68 but 25mm tube complete all as specified and directed.

S&F in repair 500 liters capacity rotational moulded polythyline water storage tanks (cylindrical vertical with closed tap) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed.

Ditto all as above new No 71 but capacity in liters 1000 complete all as specified and directed.

S&F in repair to liters capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float and handle including bracket complete all as specified and directed.

Taking down aluminium shutter exc 1sqm but n.exc 2sqm and refixing some opening after repair of aluminium shutter such as rubbers gaset, hanging of shutter , setting of shutter in original position etc complete all as specified and directed

S&F repair vitreces china half stall urinal complete including providing and fixing plugs beading urinal against wall in C.M 1:2 securing urinal to plugs with and including 60mm long brass screws painting around urinal back in cement , fixing automatic flushing cistern with brackets flush pipe , grating and union for discharge pipe complete all as specified and directed.

S&F in repair of viteress china squatting pan of pattern "long pan" size 580 x 440 mm white with ‘P’ or S trap, front or back inlet and foot regte any pattern(excluding flushing cistern and flush pipe complete all as specified and directed.

S&F in repair viteress china wash basin white flat back size 630X450mm including CP 15mm pillar tap 32mm CP waste coupling waste pipe and brackets complete all as specified and directed.

S&F plastic cipla plast multipurpose bath room coloured mirror cabinet storage size height 54cm ,35cm width and 13cm depth wall mount complete all as specified and directed.

M&L for providing 15mm thick bedding of cement mortar 1:3 mixed with water proofing compound as per manufactured instruction and applying one coat of bituminous /polymerized primer conforming to IS-3384 @.30 Ltr/sqm and applying of one coat of bounding material using blown typw bitumen confirming to IS 702 grade 85/25 @ 1.20Kg/sqm and laying of APP modified menframe pre fabricated reinforced with non woven polyster of 3.50kg/sqm (minimum), 3mm thick(minimum with minimum 75mm side overlaps and 100mm end overlaps and applying one coat of bituminous aluminium paint over APP membrane including emoval of existing water proofing treatment complete all as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surface 450X350X7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement over 10mm thick rendering in C.M 1:4 finised even and fair complete all as specified and directed.

M&L for non skid coloured ceramic tile 7 to 8 mm thick area of each tile exceeding .18 but n.exc .38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cemnt over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for vitrified ceramic coloured tiles 10mm thick(Squro/rectangular) polished area of each tiles not exc .36sqm in floors etc set and jointed in neat cement slurry and pointed in while or coloured cement over and including 15 thick screed bed in cement mortar 1:6 complete all as specified and directed.

Ditto all as above item No 83 but on wall as skirting over 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L vetrified ceremic tiles dark shade /double charged tile 7 to 8 mm thick/ultracharged(square/rectangular) polished , area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm in floorsetc set and jointed in near cement slurry and pointed in white or coloured cement to match the colured tiles over 15mm thick screed bed in cement concrete 1:6 complete all as specified and directed.

Ditto all as above item No 85 but on vertical surface over 10mm thick cement mortar 1:4 complete all as specified and directed.

S&F 75mm PVC (SWR)pipe single socketed in any length with rubber ring joints fixed to wall or laid in trenches complete all as specified and directed.

Ditto all as above item No 87 but 110mm bore complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends any radius complete all as specified and directed.

Ditto all as above item No 89 but 110mm bore complete all as specified and directed.

Taking down eaves gutter and rain water pipe and size any pattern PVC /AC pipe including all fittings heads shoes bands etc including removal to store complete all as specified and directed.

M&L for brick work with fly ash bricks straigt or curved on plan exc CM mean radious build in CM 1:6 complete all as specified and directed.

Dismantiling timber scantlings 40 sqm and over cum in section in any position unframed work complete all as specified and directed.

Ditto in fillets rails ,posts ,rafters ,purline etc complete all as specified and directed.

S&F hollow PVC wall lining consisting of 5mm thick plain colour PVC sheet including of solvent cement and fixing at site on PVC frame as per specification and drouing

S&F pre-painted galvalume aluminiun zinc coating GI corrugated steel sheet .50mm thick of an green colour having tensile strength of 550mpa as in roof covering cladding to wall fixed with self tapping secrwes

S&F pre-painted galvalume aluminium zinc coating GI based plain sheet .50mm thick of green colour having tensile strength of 550mpa as in roof covering/chedding to wall fixed with self tapping screws

S&F in repair viteress china white / coloured wash down water closet pan (padestal pattern) white one piece wall mounted type (inc flushing cistern) including connection to drain or outgoing pipe and to flushing pipe antisyphonage pipe etc incl UF soft closed seat cover complete all as specified and directed Make : Jaquar, Cat No : LYS-WHT-38851P or equilent model of Make in PS

S&F in repairs 8mm dia, brass chromium plated health faucet with 1 meter long flexible hose and wall hook complete all as specified and directed

S&F 0.63mm thick plain black , mild steel sheeting in wall cladding , steel gates and similar work , cut to size, holes , punched including round headed screws clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with rivetedor welded seams inclusing bending or turningup mitred angles etc

M&L machine cut kota stone slab flooring 18-20mm thick over 20mm thick cement screet base laid and jointed with grey cement slurry mixed wiht pigment to match the shade of the slab including rubbing and polishing complete

Ditto all as above itme No 101 but on vertical surface over 15mm thick rendring to recive kota stone complete all as specified and directed.

M&L for 0.5mm thick MS plain sheet for making modified lid of water tank as per sample kept in office of AGE B/R-II and fixed with 04 nuts and bolts for water tanks for water capacity n.exc 750 ltrs complete all as specified and directed.

M/S ABHI ASSOCIATES

BHAGWAN DAS & Co

MEEFIN ELECTRONICS

Punit Jain

SA construction co.

AEGIS INTERNATIONAL

Arun Construction Co.