Salchapra - Provision of RE work of newly constructed Goods handling Loop Line No.8 and TRD modifications over existing Goods L/No.6.

A-Salchapra - Provision of RE work of newly constructed Goods handling Loop Line No.8 and TRD modifications over

Item Breakup - A-Salchapra - Provision of RE work of newly constructed Goods handling Loop Line No.8 and TRD modifications over existing Goods L/No.6.

Per Track Preparation of Design & Drawing of overhead equipment KM

Preparation of Sectioning Diagram for Board as per modification if any of 25 KV OHE Numbers Sectioning diagram in Size, as per Board including yards and open route with including of SP, SSP & TSS showing BM, CB, SS, SM, Isolator, Section Insulator AT &PT etc. showing stations and halts for Printing of Board in High resolution drawing.

Providing and laying of concrete for foundation and plinth in all types of Soils using M-10 cum grade concrete for main foundation and M-15 grade concrete for grouting and muffing including nominal reinforcement required as per RDSO drawings.

Supply of Mast/Portal for conventional OHE

Erection of Mast/Portal for conventional OHE

100 % Extra for Erection of Mast/Portal for conventional OHE under PB

Supply of fabricated steel work (SPS)

Erection of fabricated steel work (SPS)

100 % Extra Erection of fabricated steel work (SPS) under PB

Supply of a single bracket assembly with accessories and stay & bracket insulators Numbers porcelain type.

Erection of a single bracket assembly with accessories and stay & bracket insulators Numbers porcelain type.

100% Extra for Erection of a single bracket assembly with accessories and stay & bracket Numbers insulators porcelain type under Power Block

Jointless grooved Copper Contact wire (107 Sq. mm) made out of continuous copper wire Kg as per RDSO Specification No: TI/SPC/OHE/CW/0971

Uninsulated cadmium copper catenary wire, 65 Sq. mm (19/2.10 mm) as per RDSO Kg Specification No: TI/SPC/OHE/CAT(Cu-Cd)/0971

Supply and Erection of Over Head Equipment i.e. contact & catenary wire (excluding cost Per Track of supply of contact & catenary wires), jumper wire, dropper wire, contact/catenary clips, KM fasteners and all other material required at turn out/overlaps/diamond crossings etc. Final checking of OHE and adjustment, inspection to be done by tower wagon for commissioning of conventional OHE.

Supply of Guy Rod assembly Including Mast Anchor/Guy Rod fittings.

Erection of Guy Rod assembly Including Mast Anchor/Guy Rod fittings.

Stenciling of OHE parameters incl. Rail level, Implantation, Telephone Sockets, Location Numbers no. etc.

Supply of Structure bond (including black painted MS Flat and required nut, Bolts, Spring Each washer)

Supply of Longitudinal bond (including black painted MS Flat and required nut, bolts, Numbers spring washer)

Supply of cross/ transverse bond and special bond (including black painted MS Flat and Each required nut, bolt, spring washer)

Erection of structure bond

Erection of a longitudinal bond

Erection of a transverse and special bond

Supply of Regulating Equipment 3 pulley type with Counterweight assembly & guide tube Set with fittings for conventional type OHE

Erection of Regulating Equipment 3 pulley type with Counterweight assembly & guide Set tube for conventional type OHE

Supply of Termination of Double conductor of OHE (Component)

Erection of Termination of Double conductor of OHE

Supply of 25 KV double pole isolator with earth contact assembly.

Erection of 25 KV double pole isolator with earth contact assembly. LUMDING DIVISION-ELECTRICAL/N F RLY

Supply and erection of earth electrode (earthing with 3 meter long, 50mm dia, G.I. pipe Numbers class 'B' earth electrode, adding the charcoal or coke and salt, providing concrete enclosure and MS cover plate with lifting arrangement etc. including connections with earth leads 40 x6 mm mild steel from earth electrode to switch board/electrical equipment as required.)

Supply of Porcelain type 9 tonne insulator

Erection of 9 Tonne insulator.

Supply of stay arm porcelain Insulator (Normal Zone)

Supply of bracket porcelain Insulator (Normal Zone)

Supply of A Section Insulator assembly with all accessories.

Erection of A Section Insulator assembly with all accessories.

100 % Extra Erection of A Section Insulator assembly with all accessories under PB.

Transportation Charges for OHE Masts/ structures.

Supply & erection of different type of caution boards

Supply & erection of retro-reflective structure number plate. ETI /OHE / 33A (12/97) Rev- Numbers 6.

Supply of Large Jumper - Dia 160 sqmm (Annealed copper)

CATENARY WIRE DROPPER CLIP WITH ASSEMBLY (WITH BOLT AND NUT AND PIN) RI Numbers NO.1192 AS PER RDSO DRG NO. ETI / OHE / P/1192 REV.C

Contact wire parallel clamp (small) Part No. 1041-2 with GI Bolt M16X50X38 with Nut & Numbers Spring Washer as per RDSO Drg No. ETI/OHE/P/1040-2 Mod-E or latest

Contact Wire Parallel Groove Clamp (RI No. 1031-3), complete with fasteners as per Numbers RDSOs Drg. No. ETI OHE P 1030-3 Rev-A. Specification No. TI/SPC/OHE/Fittings/0130 (10/13)

DOUBLE SUSPENSION CLAMP COMPLETE WITH ALL ACCESSORIES & FASTENERS. AS PER Numbers RDSO'S SPEC. NO.- TI/SPC/OHE/FITTINGS/0130(10/13) & RDSO'S DRG. NO.- RE/33/ P/1170, REV-K OR LATEST.

CONTACT WIRE SPLICE (TOOTHED TYPE) COMPLETE WITH FASTENERS AS PER RDSO'S Numbers DRG. NO.- ETI/OHE/P/1080 - 1, Rev - B '. & RDSO'sSPEC.NO.-TI/SPC/OHE/Fittings/0130, Rev 1 & STR CORE- STR-16 Rev 1

Catenary splice (RI-1090)

Supply of RRA clamp with packing saddle complete set as per RDSO Drawing No. Each ETI/OHE/P/1370) (Rev-J) or latest

Dismantling mast/structure/upright by cutting

100% extra for Dismantling mast/structure/upright by cutting under PB

Dismantling of Cantilever assembly Total 5554379.76