Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.5 LAccepted-AOC | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹28.3 L+₹36,422 (1.30%)Rejected-Finance B 259 RAJAJI PURAM LUCKNOW 226017 | LUCKNOW | LUCKNOW | UTTAR PRADESH | 226017 | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹30.7 L+₹2.8 L (9.86%)Rejected-Finance 58 SHAHEED NAGAR OPP BHIMRAO AMBEDEKAR UNIVERSITY RBL ROAD LUCKNOW 226025 UP | LUCKNOW | LUCKNOW | UTTAR PRADESH | 226025 | L3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | L4₹30.9 L+₹2.9 L (10.5%)Rejected-Finance 145 SAINIK NAGAR RAIBARELLI ROAD TELIBAGH LUCKNOW | L4 | Rejected-Finance OTHER THAN LOWEST | |
| 5 | L5₹32.0 L+₹4.0 L (14.3%)Rejected-Finance MIG 444 AWADHPURI COLONY AMANATGANJ AYODHYA 224001 | AYODHYA | AYODHYA | UTTAR PRADESH | 224001 | L5 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹38.4 L
EMD Value
₹76,700
Closing Date
25 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (WEST) LUCKNOW
GE(WEST) LUCKNOW PIN 226002 C/O 56 APO
SPL REPAIR TO BLDG NO 51 AND 52 AT 11 GRRC UNDER GE (WEST) LUCKNOW
2023_MES_612179_1
GE/W/LKO/38 OF 2023-24
Open Tender
Civil Works
Item Rate
90 days
Lucknow
AS PER NIT AND TENDER DOCUMENTS
9 documents required · 9 mandatory
₹500
GE (WEST) LUCKNOW
₹76,700
Yes
19 Sept 2023
4 Aug 2023
28 Aug 2023
4 Aug 2023
25 Aug 2023
18 Aug 2023
4 Aug 2023 - 11 Aug 2023
Amount
Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15cm thick (below or above ground level) complete all as specified and as directed.
Demolition of brick or stone boulder masonry, built in cement mortar including all quoins, arches, Pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed.
M&L for cement concrete 1:2:4 type B1 (20mm graded stone aggregate) as in surface channel and drain complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (including backing coat) and rubbish off the premises complete all as specified and as directed.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.inc Brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and as directed.
Taking down chowkhat with shutter (without taking off shutter from the frame) area exc 1.5 sqm but n.exc 4 sqm each complete all as specified and as directed.
Taking down shutters of any description exc 1.0 sqm but n. exc 2.0 sqm each complete all as specified and as directed.
Taking down shutter of any description area exc 1 sqm but n.exc 2 sqm each and refixing in same opening after necessary cutting and easing complete all as specified and as directed.
S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specifications and drawings complete all as specified and as directed..
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered, with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed.
S & F 125mm size aluminium alloy handles, fabricated type extruded section, ISI marked complete all as specified and as directed.
S & F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed complete all as specified and as directed.
S & F Stainless Steel butt hinges 100mm size and fixed complete all as specified and as directed.
S & F for pressed steel door frames of size 125 x 60mm for doors with one or more rebate including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and as directed
M & L for PCC type C-0 (1:3:6) using 12.5mm graded stone aggregate as in filling of hollow pressed steel frame etc complete all as specified and as directed.
S & F 30mm thick flush shutter solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.
S & F 35mm thick Second class hard wood (sal) glazed & skelton shutters ,open rebated, prepared to receive glass, gauze etc,without shash bar edge of framing plain, chamfered or rounded, fitted with cut or mitred beads for securing glass, gauge etc sizes of members of shutters as specifed in SSR Part-I section 8 clause 8.24(a) supplied and fitted to chawkhats all as specified and as directed.
S & F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts all as specified and as directed.
S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.
S & F in repair 300mm mild steel ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and as directed.
S & F Aluminium floor door stopper two legged and tongue with hard drawn steel spring fixed to floor 140mm complete all as specified and as directed.
M & L for preparation of new or previously untreated surface of wood or wood based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primercomplete all as specified and as directed.
Taking up or down steel tubing & connection 15mm bore complete all as specified and as directed.
Taking up or down steel tubing & connection 20mm bore complete all as specified and as directed.
M & L for GI tubing medium grade 15mm dia galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
M & L for GI tubing medium grade 20mm dia galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.
M & L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built inCM 1:6 complete all as specified and as directed.
M & L for brick work with sub class ‘B’ old size burnt bricks straight or curved on plan to any radius in half brick thick wall in CM 1:4 complete all as specified and as directed.
Taking down cement or cement lime plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
M & L for rendering 15mm thick in CM 1:6 on other than fair faces of brick work or concrete surface finishing the surface even and smooth without using extra cement complete all as specified and as directed.
M & L for rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surface finishing the surface even and fair including 3% water proofing compound complete all as specified and as directed. (Note:- Water proofing compound shall be measured and paid separately.)
M & L for rendering 5mm thick in CM 1:3 on concrete surface and finishing the surface even and smooth without using extra cement as on ceiling complete all as specified and as directed.
M & L for preparation of new plastered surface of ceiling and applying three coats of white wash complete all as specified and as directed.
M & L for preparation of new plastered surface of wall and applying three coats of whitewash complete all as specified and as directed.
M & L for preparation of old steel surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
Supply only integral water proofing compound conforming to IS 2645 complete all as specified and as directed.
M & L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm stone aggregate) as in sub base/levilling course complete all as specified and as directed.
M & L for coloured Non -Skid Ceramic tiles 7 to 8 mm thick area of each tiles exceeding 0.11sqm but not exceeding 0.18 sqm in floor etc set and jointed in neat cement slurry & pointed in coloured cement to match the surface over and including 15 mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.
M & L for coloured glazed ceramic tiles 300 x 450 x 6-7 mm thick but as on vertical surfaces such as skirting/dado over and including 10mm thick backing coat in CM 1:4 complete all as specified and as directed.
S & F in repair CP stop/angle valves 15mm bore fancy type chromium plated screwed down high pressure with quarter turn handle and wall flange complete all as specified and as directed.
S & F in repair CP bib taps 15mm fancy type Chromium Plated with quarter turn handle and wall flange complete all as specified and directed.
S & F in repair PVC connection pipe 15mm bore 450mm long with PTMT nuts complete all as specified and as directed.
Dismantling water tanks of capacity exc 500 & n. exc 1000 ltr complete all as specified and as directed.
S & F for rotational moulded three layered white coloured polyethylene water storage tank cylindrical vertical with closed top hoisted & fixed in position of capacity 500 litres complete all as specified and directed.
S & F in repair 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball & fixed complete all as specified and as directed.
S & F in repair vitreous china squatting pan Orissa pattern long pan size 580 x 440mm with CI trap long neck 100mm with integral foot rest & fixing including making good floor to match complete all as specified and as directed.
S & F in repair PVC low level flushing cistern 10ltrs capacity, syphonic action type white with inlet ball valve, float and handle including brackets with 32mm dia flush pipe of polythelene of low or high density complete all as specified and as directed.
S & F Gun-metal, globe or gate valves 20mm bore with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.
S & F in repair CP brass (tubular towel rail) 20 mm dia D type aluminium anodised, 60 cm long between flange complete all as specified and as directed.
S & F in repair glass corner self fancy type 250 x 250 and 5.5 mm thick fixed it with brass bracket and screwed complete all as specified and as directed.
M & L for PCC type B-1 (1:2:4) (20mm graded stone aggregate) as in benching and coping complete all as specified and as directed.
S & F in repair 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts complete all as specified and as directed.
S & F in repair 125mm size aluminium alloy handles, fabricated type extruded section, ISI marked complete all as specified and as directed.
S & F in repair for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed complete all as specified and as directed.
S & F in repair Mild steel butt hinges 100mm size and fixed complete all as specified and as directed.
M & L for 75 mm thick PCC 1:3:6, type C-1 using 20mm graded stone aggregate as in plinth protection, top finished even and smooth without using extra cement including making dummy joints 10x30mm size and filling the same with mix of 1 part of bitumen and 3 parts of sand at distance not exc 2.5 m and at every turning point complete all as specified and as directed.
S & F in repair 25mm dia fancy type drapery curtain rod made of stainless steel having wall thickness not less than 0.8mm duly PVC coated including side brackets complete all as specified and as directed.
M & L for prepration of old treated surface of wall and applying two coat of white wash complete all as specified and as directed.
M & L for preparation of new plastered surface of wall and applying minimum 1mm thick of wall care putty over prepared surface and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS-15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm complete all as specified and directed. Note: Primer and emulsion shall be carried out through air less spray machine ( Machanical means) complete all as specified and as directed.
M & L for preparation of new plastered surfaces of walls and applying two coats of OBD over a coat of 1mm thick wall care putty complete all as specified and as directed. Note: Oil bound distemper shall be carried out through roller.
M & L for preparation of old treated surfaces of ceiling and applying two coats of white wash complete all as specified and directed.
M & L for complete removal of existing treatment on wall /roof projectios including facia, cornices etc by scrapping with mechanical sander (Having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean free from dust, loose paint etc by skilled labour and applying minimum 1mm thick of wall care putty over prepared surface and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS-15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm at any height complete all as specified and directed. Note: Primer and emulsion shall be carried out through air less spray machine ( Machanical means) complete all as specified and as directed.
M & L for preparation of old plastered surfaces of walls and applying two coats of Oil Bound Distemper over a coat of 1mm thick wall care putty complete all as specified and as directed. Note: Oil bound distemper shall be carried out through roller.
Hacking out old broken glass from metal frame incl punching or drilling out old glazing pins/spring clips and providing complete all as specified and as directed.
M & L for 3mm thick plain sheet glass ordinary quality incl glazing with putty area n.exc 0.5 sqm in each pane complete all as specified and directed.
M & L for 10mm thick rendering on fair faces of brikwork or concrete surface in CM (1:3) including finishing the surface even and fair using 100% coarse sand on roof surface including water proofing compound as per manufacturer's instructions and as directed. Note :- WPC shall be measured and paid under respective item rendering shall be provided PCC padding shall not be provided.
M & L for provision of roof treatment with polymeric water proofing membrane all as given below :- (a) Taking down existing water proofing treatment and cleaning roof surface by washing and rubbing etc. and removing the material retrieved to a distance not exceeding 500 m where directed. (b) Applying a coat of bituminous primer conforming to IS : 3384-1986 @ 0.25 Iitres/sqm on prepared surface and allowed to dry. (c) Applying and laying 3mm thick APP membrane having non oven polyester matt at core and covered with high quality polymeric asphaltic protected thermo fusible HMHDPE film on both sides with over laps 10cm and 15 cm at longitudinal and transverse direction respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners. The membrane shall be torched into groove on vertical plane and groove sealed with cement mortar 1:3. (d) M & L for two coats of aluminium paint on membrane surface all as specified and directed.
Taking down carefullycopper/aluminium point wiring (light, fan, socket or power) complete with fitting such as switches, sockets ceiling rose sketch light fittings etc, and making good the disturbed surface of walls and floors etc as directed.
M&L for point wiring complete for one light point or one fan point controlled by one, one way 5 Amp switch with PVC (FRLS) insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including not less than 20mm dia 'medium grade' PVC concealed conduits ISI marked and fittings, including pressed steel concealed terminal switch boxes not less than 1.6mm thick of reqd size factory made duly painted inside and outside with one coat red oxide primer, 3mm thick plastic laminated bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC(FRLS) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed. (a) One light/fan point controlled by one switch
All as per item No 71 above but one socket outlet point 5 Amp on an independent board complete all as specified and as directed.
Same as item No 72 but on the same board complete all as specified and as directed.
All as per item No 71 above but one Call bell / buzzer point controlled by one bell push complete all as specified and as directed.
All as item No 71 herein before but using 2.5 sqmm , PVC insulated, stranded copper conductor single core cable for one 3 pin 15 Amp socket out let point on an independent board complete all as specified and as directed.
S & F switch piano flush button single pole one way 5 Amp 240 volt complete all as specified and as directed.
S & F switch piano flush button single pole one way 15 Amp 240 volt complete all as specified and as directed.
S&F socket outlet flush type multipurpose 2 in 1, 3 pin 5 and 15 Amp, 230 volts complete all as specified and as directed.
S&F bell push single pole one way 5 Amp, 240 volt fuesh type complete all as specified and as directed.
S&F call bell AC single pole 240 volt Musical Type complete all as specified and as directed.
S&F socket outlet flush type 5 pin 5 Amps 240 volts complete all as specified and as directed.
S&F ceiling rose surface bakelite three terminal complete all as specified and as directed.
Supply & fixing bulk head light fitting made from cast aluminium body with heat resistance pressure die cast housing, IP-65 and IK 08 protection cover suitable for bulk head fitting integrated type 10/7W LED, 6500K , 100 lumens/watt including inbuilt electronic driver complete all as specified and as directed. Makes shall be provided group-I cat as per latest approved make given by HQ CECC
S&F MCB single pole 6 to 32 Amp 240 volts 10 KA breaking capacity complete all as specified and as directed.
All as per item No 84 herein before but 40 Amp, 240 volts, single pole & neutral complete all as specified and as directed.
S&F sheet metal enclosure for MCB DB double door type, single pole and neutral (4+2) way 240 Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and as directed.
Supply and fixing modular ac box power unit with socket plug top and MCBs with a two pin and one pin for earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and as directed.
Supply and Fixing wall/surface mounting luminaires integrated LED Batten 20/22 W, 6500 K,100 lumens/watt , 230V with extruded Aluminium housing 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver, 25k burning hours ,2.5 KV surge protection complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements all as per specified and directed by Engr-in-charge Note: Makes shall be provided group-I cat as per latest approved make given by HQ CECC
Supply and fixing wall/surface mounting luminaires (Mirror Light) integrated LED Batten( 2 feet) 10/12 W, 6500 K, 230V , minimum 100 lumens/watt,with extruded aluminium housing & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrngements all as per specified and directed by Engr-in-charge.Note: Makes shall be provided group-I cat as per latest approved make given by HQ CECC
Taking down carefully ceilling fan/exhaust fan oiling,greasing of any size and type and refix on same or new location complete all as specified and as directed.
Taking down carefully old light fitting of any make and any type and refix on same or new location complete all as specified and as directed.
M/s Rathore Traders
M/S S S A ASSOCIATES
M/S KAUSHIK CONSTRUCTION
ABC CONSTRUCTION CO
ANIL CONSTRUCTION
QUALITY CONSTRUCTIONS CO
M/S Vindhya Infraventures
Divya Jyoti Constructions
stage.html
html • 0.08 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .