Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹5.3 L
Closing Date
10 Dec 2026, 5:30 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Cauvery Neeravari Nigam Limited
punnyasree
Rehabilitation and Improvement works to Uduthorehalla Dam under World Bank aided DRIP Phase-II programme (package-I)
CNNL/2026-27/DA/WORK_INDENT5557
CNNL/2026-27/DA/WORK_INDENT5557
Open
Dam and Allied works
Two Tender Document System(Two Cover)
CNNL No 2 KC Div Kollegala
10 documents required · 10 mandatory
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
A minimum number of one similar contracts-Providing Grouting to Dam & Improvements to Approach road-that have been satisfactorily and substantially completed as a prime contractor, between 2019-20 to 2025-26 and bid submission deadline:(1) ONE contract, each of minimum value 420.70 Lakhs (80 percent of the Estimated Value of contract) (2)TWO contracts, each of minimum value 315.50 Lakhs (60 percent of the Estimated Value of contract) (3) THREE contracts, each of minimum value 210.33 lakhs (40 percent of the Estimated Value of contract).
For the above and any other contracts (substantially completed and under implementation) as prime contractor, between 2019-20 to 2025-26 and application submission deadline a minimum construction experience in the following key activities successfully completed (1) Drilling core hole in hard rock: 1704.00 Rmt (2) Grouting: 205.00 Tonne (3) PCC /RCC/ In-situ : 591.00 Cum (4) SDBC: 431.00 Cum
Experience under construction contracts such as-Providing Grouting to Dam for at least the last seven years, starting 1st April 2019.
Bidders who meet the minimum qualification criteria will be qualified only if their available bid capacity for construction work is equal to or more than the total bid value of the work. The available bid capacity will be calculated as under.Assessed Available bid capacity-AXNX1.15-B,Where,A-Maximum value of civil engineering works executed in any one year during the last seven years(updated to the price level of the financial year 2026-27 at the rate of 5percent per year),taking into account the completed as well as works in progress)N-Number of years i.e.1.0 years ,(12 Months), prescribed for completion of the works for which bids are invited (period upto 6 months to be taken as half-year and more than 6 months as one year).B-Value at 2026-27 price level, of existing commitments on on-going works to be completed during the period of completion of the works for which bids are invited.Note-the statements in Section IV showing the value of existing commitments of on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Project Manager,not below the rank of an Executive Engineer or equivalent
Bidder shall demonstrate that it has access to, or has available liquid assets, unencumbered real assets, lines of credit, and other financial means (independent of any contractual advance payment) sufficient to meet the construction cash flow requirements estimated as Rs.131.46 Lakhs (about 3 months cashflow at peak construction period) for the subject contracts net of the Bidders other commitments
The Bidder must demonstrate that it will have access to the key Contractors equipment listed as per qualification criteria section-4 Equipment in the bid document. (1) Pneumatic Grout Pump-1No. (2) Pnemumatic Drilling machine -1No. (3) Screw Compressor-1No. (4) Hydraulic Excavator-2 No.s (5) Self loader concrete mixer (Ajax 2/4 Cum) - 2 No.s (6) Dumper/Tipper-2 No.s(7) Lorry mounted water tanker- 2No.s (8) Vibratory roller-2 No.s (9) Grader/ Asphalt Paver-1 No. (10) Diesel Generator min 30 KVA-1 No. The Bidder shall provide further details of proposed items of equipment using the relevant Form in Section IV
The Bidder shall provide details of the Key Personnel and such other Key Personnel that the Bidder considers appropriate, together with their academic qualifications and work experience. The Bidder shall complete the relevant Forms in Section-4, Bidding Forms. The key personnel requirement is as per qualification criteria of Section-3 Key personnel.(1) Construction Manager-1 No. BE (Civil)-10 Years Experience (2) Grouting Specialist-1 No. BE (Civil)-10 Years Experience (3) Site Engineer-2 No.s BE/Diploma (Civil)-5 Years Experience (4) Site Engineer-1 No. BE (Electrical)-5 Years Experience (5) Quality Control Engineer-1 No. BE (Civil)- 3 Years Experience. (6) Surveyor -Diploma (Civil)- 3 Years Experience (7) Safety, Environment & Social Expert - BE Civil/ Graduate in Environment Engg/ Science- 3 Years Experience.
Minimum average annual construction turnover of Rs.1052.00 Lakhs (the amount stated should normally not be less than twice the estimated annual turnover or cash flow in the proposed works contract) calculated as total certified payments received for contracts in progress and/or completed within the last seven financial years, divided by seven years.(2019-20 to 2025-26)
PWD Class-I Registration Certificate
Reports on the financial standing of the tenderer, such as profit and loss statements and auditors reports for the last five years
₹5,000
₹5.3 L
9 Nov 2026
9 Nov 2026
14 Dec 2026
25 Nov 2026
25 Nov 2026
Rehabilitation and Improvement works to Uduthorehalla Dam under World Bank aided DRIP Phase-II programme (package-I)
Drilling 50 mm dia. holes vertical or inclined upto 10 degrees to vertical in rock / masonry / concrete by percussion drilling method using waggon drill or any other suitable equipment including cost ...
Flushing grout holes of all sizes with water and air jets alternatively for an average period of 30 minutes and observing water intake after flushing including cost of all materials, machinery, labour...
Providing and fixing GI pressure relief pipe with one end closed by perforated GI plate and other end provided with alluminium lid hinged to pipe including cost of all materials, labour, drilling 8 mm...
Drilling 47 mm dia ( BX ) core hole in hard rock using diamond core bit vertical / inclined upto 10 degree to vertical as directed including cost of all materials, machinery, labour, water charges, co...
Consolidation Grouting with neat cement grout mix of suitable consistency under specified grout pressure as directed in drilled holes by stage grouting method including cost of all materials, machiner...
Dismantling of Structures - Dismantling of existing structures like culverts, bridges, retaining
walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P ...
Providing and laying in-situ vibrated M-15 grade cement concrete using 40 mm down approved, clean, hard, graded aggregates for plain concrete works including cost of all materials, machinery, labour, ...
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Design, fabrication, supply, erection and commissioning of trash racks consisting of a number of panels of suitable height with vertical trash bars welded to structural steel frame at wider interval a...
Design, fabrication, supply, erection and commissioning of embedded parts consisting of liners for trash rack grooves ( for coarse and fine screenS ) with all accessories for pump house intake structu...
Cutting and removing jauliflora bushes upto 1.50 m girth excluding removal of stumps and including burning or disposing off the materials as directed with all other ancillary operations complete Compl...
Providing and laying Hariyala or other approved quality turfing sods for the slopes of earthen embankments over 20 mm thick sand backing including cost of all materials,machinery,labour including prep...
Removing and refixing disturbed chainage/ demarcation/hectometre / guard stones including excavation, back filling after refixing stone with all other ancillary operations Complete as per specificatio...
Construction of cement concrete kerb with channel with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M10 grade foundation 150 mm thick, kerb channel 300 mm wide, 5...
Finishing with Epoxy paint (two coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel wo...
Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 g/L, of approved brand and manufacture, including applying additional coats wherever required,to ...
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal ofunserviceable m...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...
Water Bound Macadam; Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling...
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...
Patching of pot holes - (ii) Patching of deep pot holes using WBM Gr I & SDBC Gr II 25mm thick - Patching of Deep Potholes 75mm thick by restoring the Granular Base course using material confirming to...
Tack coat on Bituminous surface - Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned...
Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 5% by weight ...
Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions upto 10MSA & for Residential ...
Supplying,installing,testing and commissioning of Diesel Generator set with following specifications. Power rating as per standard reference condition as per-BS5514/ISO3046/ISO8528&IS1002/ISO 3046 Gen...
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
URP DTS1.docx
Tender Document • 3.10 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .