Erection of 7.86 Km of 11KV feeder viz. Mandabathur feeder to be fed from 110/11KV Pillaitheruvasal Sub Station, Karaikal along with supply of certain materials under DDUGJY Project

Supply of 11KV 'V' cross arm with clamp

Supply of 11 KV Pin insulator with pin.

Supply of 11 KV Strain disc with metal parts.

Supply of HT stay set complete .

Supply of R.C.C Pole of length (30') 9.144 Mts.

Supply of R.C.C Stud Pole of length (30') 9.144 Mts.

Supply of 5' X 6'' channel cross arm

Supply of TI fitting/Clamp in the pole for 11 KV over head line including supply of suitable pole clamp.

Supply of heat shrinkable straight through jointing kit suitable for 11KV, 3x400 Sq.mm XLPE HT UG Cable with all accessories

Supply of 150 mm dia. G.I. Pipe conforming to I.S: 1239/ Part-I/ Revised 2004.

Supply of RCC Trough as specified in the drawing enclosed.

Supply of outdoor type touch proof end termination kit suitable for 11KV, 3x400 Sq.mm XLPE HT UG Cable with all accessories.

Supply of the cable route marker plate.

Supply of XLPE Power cable of grade 11 KV (E) of Size 3x400 mm²

Labour charges for erection of V cross arm with clamp

Labour charges for erection of 11 KV Pin insulator with pin.

Labour charges for fixing of 11 KV disc with metal parts.

Labour charges for erection of HT stay set complete including excavation of pit and cost of materials as required.

Labour charges for fixing of 5'X6' channel cross arm with suitable clamp

Labour charges for fixing of TI fitting/Clamp in the pole for 11 KV over head line.

Labour charges for erection of heat shrinkable straight through jointing kit suitable for 11KV, 3x400 Sq.mm XLPE HT UG Cable with all accessories

Labour charges for erection of 150 mm dia. G.I. Pipe.

Labour charges for erection of RCC Trough

Labour charges for erection of outdoor type touch proof end termination kit suitable for 11KV, 3x400 Sq.mm XLPE HT UG Cable with all accessories.

Labour charges for concreting the cable route marker plate along the cable route at the location directed by the engineer in charge.

Supply and Labour charges for erection of DP structure with out bed channel complete including erection of 30' RCC pole and concreting 0.6 x 0.6 x 1.5 mts. with coping 0.6 x 0.6 x 0.5 mts. in 1:3:6 ratio using 20mm HBG metal, fixing of DP structure materials,Double contact AB switch, erection of earth electrode with B class 50 mm Dia G.I pipe and earthing all metal parts etc. and two coats of cement colour painting to RCC pole etc., including cost of concreting materials such as cement,20mm HBG metal,sand,aluminium & cement paint, earthing materials HT/LT Danger boards, MS 5/8 bolt, nuts & washers (required size) etc.,

Labour charges for erection of 30' RCC pole including excavation of pole pit and concreting,0.6 x 0.6 x 1.5 mts and copping 0.6 x 0.6 x 0.5 mts in 1:3:6 ratio using 20 mm HBG metal, earthing of RCC pole including supply of concreting materials and No.6 G.I wire for earthing and Pole block.

Labour charges of erection of 30' RCC stud pole including excavation of pole pit.

Labour charges for straining of ACSR 7/4.09 Sq.mm conductor including binding etc,. For HT,OH lines as required

Labour charges for strengthening of ACSR 7/3.35 Sq.mm conductor to ACSR 7/4.09 Sq.mm. including binding etc,. For HT,OH lines as required.

Labour charges for Laying of one run of XLPE Power cable of grade 11 KV (E) of Size 3x400 mm² direct in ground including excavation of trench of size 0.5 m (W) x 1.2 m (D), river sand cushioning, protective covering with RCC trough and refilling the trench, etc. as required in Bituminous Road as specified in the tender specification and removal of surplus earth materials if any.

Labour charges for Dismantling of 30' RCC Pole

Labour charges for Dismantling of HT line 7/3.35 ACSR conductor.

Labour charges for Dismantling ofLT line

Labour charges for Dismantling of D.P Structure with AB Switches at G-Y and E-Y at sketch.

Karthik Enterprises

JEEVA ELECTRICAL WORKS