SPECIAL REPAIR FOR CONVERSION OF EXISTING CHARPOY GI NYLON

Amount

Removing old unserviceable newar from existing Charpoy GI Pipe, Reassembling / tightening of Charpoy frame to bring the frame in original position after removing the unserviceable long rail / Short rail / elbow / Check nut / leg wherever found unserviceable and fixing new parts as directed. New parts wherever required and ordered shall be paid separately under respective items of BoQ here in after as supply only if ordered to be replaced.

Supply only new 03 way medium grade GI elbow 65mm long, 32mm dia, ISI marked to Charpoy GI Pipe all as per drawing and as directed.

Supply only new 06mm thick ISI marked medium grade GI checknut to Charpoy GI Pipe all as per drawing and as directed.

Supply only new long rail 1980mm long of 32mm dia medium grade GI pipe, ISI marked and threading the same 22mm long at one end and 52mm long at other end and fixing in position complete all as shown on drawing and as specified.

Cutting and converting the old unserviceable long rail as retrieved vide Srl No. 04 here-in-before into two short rails and fixed to charpoy GI pipe duly threaded 22mm long at both ends including removal of old and broken threaded short rails.complete all as shown on drawing and as specified

Cutting and converting the old unserviceable short rail as retrieved vide Srl item No. 05 here-in before into two legs and fixed to charpoy GI pipe duly threaded 22mm long at one end including removal of old and broken unserviceable legs complete all as shown on drawing and as specified

Supply and fixing new MS flat iron stiffner of size 900mm x40mmx5mm, 02 in numbers in each charpoy of approved make, duly grinded at all the sharp edges and duly fixed with round headed steel nut and bolts with washer of suitable size across the long rail at equal spacing. MS flat iron strip shall be painted with two coats of synthetic enamel black paint over a coat of red oxide primer.

Supply and fixing new commercial plywood, ISI marked, BWR grade of sixe 6.5x3'x12mm. The ply shall be fixed with 10 Nos in total of round headed steel nuts and bolts with washer of superior quality and of suitable size in one charpoy GI Pipe complete all as shown on drawing and as specified. (Note:- To ensure the genuineness of plywood used, it is mandatory to produce the purchase voucher of full quantity of plywood alongwith test certificate by the contractor before incorporating the same in the work).

Supply and fixing new MS flat iron round plate one size 40 mm dia, 3mm thick at the bottom of leg by welding as per the sample approved by GE all as specifed and directed.

Arneja Builders (BID ID -3215377)

B K CONTRACTORS (BID ID -3217483)

M/s Pee Jay Enterprises (BID ID -3211696)

Jiwan Singh AND Associates (BID ID -3212006)