Tender ID

Karnataka

Active

Works

Electrical

Providing New Solar roof top, Power plant 4KV to Fisheries Assistant Direcoter Office and Providing Painting to office compound and fixing one AC and constructing balance interlock and re-wiring to apstair office in fisheries department karwar

Rural Development and Panchayat Raj Department

RDPR Division Office Karwar | Uttara Kannada, Karnataka

Amount: ₹4.5 LCloses: 24 Nov 2026

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published11 Nov 2026
Closes24 Nov 2026

Tender Value

₹4.5 L

EMD Value

₹13,750

Closing Date

24 Nov 2026, 4:31 pm

Tender Inviting Authority

Office Inviting Bids

Rural Development and Panchayat Raj Department

Contact Person

Executive Engineer

Mobile Number

Work Description

Providing New Solar roof top, Power plant 4KV to Fisheries Assistant Direcoter Office and Providing Painting to office compound and fixing one AC and constructing balance interlock and re-wiring to apstair office in fisheries department karwar

Tender Information

Tender ID

RDPR/2026-27/EL/WORK_INDENT30616

Reference Number

RDPR/2026-27/EL/WORK_INDENT30616

Tender Type

Open

Product Category

Electrical

Form of Contract

Electronic Documents, First(One Cover)

Location

RDPR Division Office Karwar

Source Website

Subscribe to view

Documents Required

6 documents required · 6 mandatory

Technical Bid

RequiredACCURATE POSTAL ADDRESS AND PHONE NUMBER AND EMAIL ADDRESS

RequiredVALID ELECTRICAL LICENCE

RequiredGST REGISTRATION CERTIFICATE

RequiredFIFTY PERCENT OF SIMILAR NATURE OF WORKDONE CERTIFICATE ISSUED FROM EXECUTIVE ENGINEER OR EQUIVALENT 2021-22 to till date

RequiredTHIRTY PERCENT OF ESTIMATE COST LIQUID ASSETS/BANK LINE OF CREDIT FROM ANY NATIONALIZED/SCHEDULED BANK MUST BE SUBMITTED AS PER KW BID DOCUMENT

RequiredANNUAL TURN OVER CERTIFICATE OF LAST 5 YEARS ISSUED BY CA 2021-22 to TILL DATE

Eligibility Criteria

BIDDERS SHALL NOT BE UNDER A DECLARATION OF INELIGIBILITY FOR CORRUPT AND FRAUDULENT PRACTICES ISSUED BY ANY STATE GOVERNMENT / GOVERNMENT OF INDIA /UNION TERRITORY.

TO ENSURE BROWSER COMPATIBILITY OF THE COMPUTER WELL IN ADVANCE TO THE LAST DATE AND TIME FOR RECEIPT OF TENDERS THE DEPARTMENTS SHALL NOT BE RESPONSIBLE FOR NON ACCESSIBILITY OF E-PROCUREMENT PORTAL DUE TO INTERNET CONNECTIVITY ISSUES AND TECHNICAL GLITCHES AT BIDDERS END.

EMD PAYMENTS THROUGH E-PAYMENT MODE SHALL BE MADE AS ONE SINGLE TRANSACTION AND PAYMENTS MADE IN PART ARE LIABLE FOR REJECTION.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

BIDDER SHALL PAY CONTRACT MANAGEMENT MODULE PROCESSING FEES OF 0.025% OF THE CONTACT VALUE (MIN RS.500/- & MAX RS.7500/-) SOON AFTER CONTRACT HAS BEEN ISSUED TO BIDDER.

FOR DETAILS REFER TENDER NOTIFICATION AND CONDITIONS IN THE BID DOCUMENTS.

ALL MATERIALS SHOULD BE IN GOOD QUALITY AS PER SPECIFICATION, QUALITY CERTIFICATE FOR THE SAME SHOULD BE OBTAINED FROM THE CONCERNED AUTHORITY AT THEIR OWN COST.

ACCEPTENCE / CANCELLATION OF THE WORKS ARE RESERVED BY UNDER SIGNED WITHOUT ANY REASONS FOR THE SAME.

CORRIGENDUMS / MODIFICATIONS / CORRECTION, IF ANY, WILL BE PUBLISHED IN THE WEBSITE ONLY.

ALL THE SCANNED DOCUMENTS PERTAINING TO BIDDER TO BE UPLOADED SHALL BE IN ORIGINAL AND SAME ORIGINALS SHOULD BE PRODUCED TO THE EXECUTIVE ENGINEER (AT THE TIME OF TECHNICAL BID OPENING) WHO RESERVES RIGHT TO VERIFY THE ORGINAL DOCUMENTS BEFORE APPROVAL.

TO QUALIFY FOR AWARD OF THIS CONTRACT EACH TENDERER SHOULD GIVE ALL DETAILS AND DOCUMENTS AS PER TECHNICAL AND FINANCIAL BID ATTACHED TO THIS TENDER.

ALL THE MATERIALS TO BE UTILISED FOR THE WORK MUST BE TESTED IN RWS SE OFFICE DHARWAD LABS AND QUALITY CONTROL TEST REPORTS MUST BE ENCLOSED TO THE BILLS. COST OF ALL QC TEST MUST BE BORNE BY CONTRACTOR.

IF ANY DATE IN THE TENDER TIME TABLE IS GOVERNMENT HOLIDAY, NEXT WORKING DATE WILL BE CONSIDERED

TENDERER MUST SUBMIT HIS PRESENT ACCURATE POSTAL ADDRESS AND PHONE / CELL PHONE NUMBER

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

THE TENDER MAY BE CANCELLED AT ANY STAGE WITHOUT ASSIGNING ANY REASON

TENDERERS MUST HAVE VALID PWD REGISTRATION COPY

THE RATES OF ITEMS ARE INCLUSIVE OF COST OF MATERIALS, LABOUR CHARGES, HOM OF MACHINERY, ALL LEAD AND LIFTS AND ALL OTHER CHARGES TO COMPLETE THE WORK SUCCESSFULLY AS PER SPECIFICATIONS AND AS DIRECTED BY ENGINEER IN CHARGE OF WORK

SIMILAR NATURE OF WORK DONE CERTIFICATE - MINIMUM 50% OF AMOUNT PUT TO TENDER ISSUED BY EXECUTIVE ENGINEER OR EQUIVALENT LAST 5 YEARS (2021-22 to till date)

THE BIDDER MUST SUBMIT LAST 5 YEARS (2021-22 to till date) TURN OVER CERTIFICATE OBTAINED FROM CHARTERED ACCOUNTANT (CA) ONLY. BIDDER MUST HAVE ANNUAL CONTRACT AVERAGE TURN OVER FOR 2 YEARS NOT LESS THAN THE AMOUNT PUT TO TENDER IN EACH FINANCIAL YEARS.

THIRTY PERCENT OF ESTIMATE COST LIQUID ASSETS/BANK LINE OF CREDIT FROM ANY NATIONALIZED/SCHEDULED BANK MUST BE SUBMITTED AS PER KW BID DOCUMENT

GST SHALL PAID SEPERATELY

ALL OTHER CONDITIONS AS PER KW TENDER DOCUMENT

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹13,750

Important Dates

Last Activity

11 Nov 2026

Published

11 Nov 2026

Download Ends

19 Nov 2026

BOQ Preview

•

Supply and erection of Solar Grid System 4KW (Non Subsidy) (Solar Non DCR Mono Perc Modue 4kwp, 4kw grid tie invertor, ACDB, DCDB, Earthing kit, MMS and Kit Pack) Quotation approved by executive Engin...

•

Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300 mm as required.

•

Supplying and fixing PVC/metal conduit Deep junction box

•

Supplying PVC flexible conduit pipe....mmdiafixingonsurface over inverted tape red wooden plugs orphill plugs or raw lplugs and clamped using heavy gauges add lesat aninterval of 300 mm using NF scre...

•

Supplying and wiring adopting loop system in existing PVC Conduit /casingcapping using 2x1.5 Sqmm (Phase&Neutral) &1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS...

•

Wiring for lighting/power circuit using one of FRLSPVC insulated 1100 V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying and fixing surface/flushmounting unbreakable PVC modular box suitable for mounting modulars witch plates with due groove cutting in Brick/C.Cwall, including necessary rawl plugs, Machine/ NF...

•

Supplying and flush mounting powder coated / galvanized metal boxe suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall.

•

Supplying and flush mounting powder coated / galvanized metal boxe suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall.

•

Supplying and flush mounting powder coated / galvanized metal boxe suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall.

•

Supplying and flush mounting powder coated / galvanized metal boxe suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall.

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.

•

Supplying & fixing of Porcelain fuse channel withcut out on existing wooden/panel using necessary nuts, bolts and washers.

•

SupplyingandfixingMouldedCaseCircuitBreaker (MCCB)over the existing wood/panel board using necessary screws,bolts, nuts, necessary phase separators,handleandwiringcomplete.Protection of Overload and S...

•

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energycross-3 withShort circuitbreaking capacit...

•

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450Vupto 300m A sensitivity on existing wood/panel board

•

Supplying and fixing of T5 Fluorescent Tube with 14W power consumption with low3 mg Mercury content& below 40% glass content than TSlamp&20% less phosphor coating than T8 with initial lumen on1350 (fo...

•

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed o...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

30616.pdf

Tender Document • 2.73 MB

kw-1.pdf

Tender Document • 0.60 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Tender ID

Karnataka

Active

Works

Electrical

Providing New Solar roof top, Power plant 4KV to Fisheries Assistant Direcoter Office and Providing Painting to office compound and fixing one AC and constructing balance interlock and re-wiring to apstair office in fisheries department karwar

Rural Development and Panchayat Raj Department

RDPR Division Office Karwar | Uttara Kannada, Karnataka

Amount: ₹4.5 LCloses: 24 Nov 2026

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published11 Nov 2026
Closes24 Nov 2026