PERIODICAL SERVICES TO JCOS/OR MD ACCN UNDER AGE B/R-II AT ITARANA CANTT ALWAR

Amount

M&L rendering 15 mm thick in CM (1:4) on stone masonry surfaces or fair faces of brick masonry finished even and smooth without using extra cement including taking down cement or cement lime plaster, any description on brick or stone walls,etc including racking out joints, hacking for key,scrubbing down with water etc, complete all as specified and directed.

M&L rendering 15 mm thick in CM (1:6) on stone masonry surfaces or on other than fair faces of brick masonry finished even and smooth without using extra cement including taking down cement or cement lime plaster, any description on brick or stone walls,etc including racking out joints, hacking for key,scrubbing down with water etc, complete all as specified and directed.

M&L rendering 5mm thick in CM (1:3) on concrete ceiling surfaces finished even and smooth without using extra cement including taking down cement or cement lime plaster, any description on brick or stone walls,etc including racking out joints, hacking for key,scrubbing down with water etc, complete all as specified and directed.

M&L plastering in patches not exceeding 3 sqm and jointing new to old surface 15 mm thick in CM (1:4) on stone masonry surfaces or on other than fair faces of brick masonry finished even and smooth without using extra cement including taking down cement or cement lime plaster, any description on brick or stone walls,etc including racking out joints, hacking for key,scrubbing down with water etc, complete all as specified and directed.

M&L plastering in patches not exceeding 3 sqm and jointing new to old surface 15 mm thick in CM (1:6) on stone masonry surfaces or on other than fair faces of brick masonry finished even and smooth without using extra cement including taking down cement or cement lime plaster, any description on brick or stone walls,etc including racking out joints, hacking for key,scrubbing down with water etc, complete all as specified and directed.

M&L plastering in patches not exceeding 3 sqm and jointing new to old surface 5mm thick in CM (1:3) on concrete ceiling surfaces finished even and smooth without using extra cement including taking down cement or cement lime plaster, any description on brick or stone walls,etc including racking out joints, hacking for key,scrubbing down with water etc, complete all as specified and directed by Engr-in-Charge.

M&L for Rough cast plaster on exterior walls applying the under coat of cement and sand morrtar (1:3) not less than 10mm thick and while it is still in plastic state the roughcast mixture consisting of crushed stone or fine gravel aggregate (size between 6 to 12mm ) mixed with coarse sand and cement in the raio of (1:1:1) shall be applied and finished even incl taking down old plaster/pointing of any type etc complete all as specified and directed.

M&L for preparing newly plastered surfaces & applying three coat of white wash on ceiling.etc complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying two or more coatsof 100% Premium acrylic emulsion paint (Weather proof coat) havingVOC less than 50 gm/litre and UV resistance asper IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over and including primer coat of exterior primer applied @ 0.90 litre/ 10sqm etc complete all as specified and directed.

M&L for preparation of new plastered wall surfaces & applying two coats of distember oil bound emulsion over a coat of alkali resistance primer etc complete all as specified and directed.

M&L for complete removal of existing treatment by mechanical scrapper , brooming down Washing, rubbing down and stopping of distempered and painted old decorated surfaces of walls, plastered or unplastered including cornices, plasters etc and applying two coats of oil bound distemper (of approved shade/tint) over a coat of alkali resistance primer after applying 1 mm thick wall care putty as per manufacturars instruction etc complete all as specified and as directed .

M&L for preparing old decorated wall surfaces by brooming down, taking out nails if any and filling the holes with putty old decorated surfaces of walls, plastered or unplastered including cornices, plasters etc and applying one coat of oil bound distemper of approved shade/tint etc complete all as specified and as directed.

M&L for preparing old decorated surface of wall incl brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including cornices, plasters etc and applying one coats of white wash etc complete all as specified and as directed.

All as per description of serial item No.13.00 here-in-above but one coat on ceiling surfaces etc complete all as specified and directed.

All as per description of serial item No.13.00 here-in-above but two coats on ceiling surfaces etc complete all as specified and directed.

All as per description of serial item No.13.00 here-in-above but two coats of white wash on walls etc complete all as specified and directed.

M&L for preparation of old treated surfaces of walls, plastered or unplastered and applying one coat of exterior emulsion weather proof paint of approved shade/tint. etc complete all as specified and as directed.

M&L for preparation of old decorated surfaces of walls by brooming down or steel wire brushing, scrapping down of lime scale, smoke soot, trading oil and greasy spots etc. and applying one coat of colour wash on old decorative surfaces of walls etc complete all as specified and directed.

M&L for preparation of old painted wooden surfaces over 10 cm in width or girth and applying one coat of synthetic enamel paint on old painted surfaces, etc complete all as specified and as directed by Engr- in - Charge.

M&L for preparation of old painted steel surfaces over 10 cm in width or girth and applying one coat of synthetic enamel paint on old painted surfaces, etc complete all as specified and as directed by Engr- in - Charge.

M&L for writing letters or figures (Block, Roman, Itslic or Indian) n. exc 30 cm height with thick synthetic enamel paint. etc complete all as specified and as directed by Engr- in - Charge.

Complete removal of existing treatment from wall surfaces by mechnical scraper and applying two coats water based premium acrylic smooth exterior emulsion of approved colour with silicon additives & Color stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, alkali nad fungal resistance properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint over and including applying a layer of 1 mm thick wall care putty as per manufacturars instruction upto any height incuding necessary scaffolding. etc complete all as specified and as directed by Engr- in - Charge.

Complete removal of existing treatment from wall surfaces by mechnical scraper and applying two coats of smooth interior acrylic emulsion paint with rich matt finish having VOC less than 50 grams per litres as per LEEDS specifications @1 ltrs(unndiluted) /10 sq mtrs diluted with water in 2:1 ratio applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint s as per manufacturer conditions over and incuding a layer of 1mm think wall care putty as per manufacturars instruction any height incuding necessary scaffolding etc complete all as specified and as directed .

Material and labour for obliterating old writing of any description, not exc 0.1 sqm with paint to match existing works etc complete all as specified and directed.

Taking down and removal of loose / disintegrated old concrete / plaster from old surface etc from RCC Chhajja, ceiling ,roof projection, fins and facia and other similar RCC items and ap[plying a caot of concrete bonding agent Nitobond EP or equivlent on old surfaces and M&L for 10mm thick rendering with polymer modified plaster finishing the surface even and smooth without using extra cement complete including use and waste of nesessary form work and scaffolding work for repair up to 12M height etc complete all as specified and directed.

M&L applying rust removerof M/s dr fixit or equivlent of existing reinforcement and applying a coat of epoxy zinc primer etc complete all as specified and directed

ALAKNANDA ENTERPRISES (BID ID -3064868)

AARSINFRATECH (BID ID -3068641)

M/s ASK Enterprises (BID ID -3078653)

J.J.ENGINEERING (BID ID -3078256)

GAR CONSTRUCTIONS (BID ID -3063045)

M/s R P Enterprises (BID ID -3068930)

Surya & Gautam Builders (BID ID -3079789)

M/S GAURI CONSTRUCTION (BID ID -3068267)