Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.1 CrAccepted-AOC | ₹1.1 Cr | L1 | Accepted-AOC L1 |
| 2 | L2₹1.1 CrRejected-Finance | ₹1.1 Cr | L2 | Rejected-Finance L2 |
| 3 | L3₹1.1 CrRejected-Finance H 12 SECTOR DELTA II GREATER NOIDA DISTT G B NAGAR UP | GREATER NOIDA | G B NAGAR | UP | ₹1.1 Cr | L3 | Rejected-Finance L3 |
| 4 | L3₹1.1 CrRejected-Finance VILLAGE MILAK LACHCHI POST BEDPURA GREATER NOIDA | ₹1.1 Cr | L3 | Rejected-Finance L3 |
| 5 | L4₹1.1 CrRejected-Finance | ₹1.1 Cr | L4 | Rejected-Finance L4 |
Tender Value
₹1.1 Cr
EMD Value
₹2.2 L
Closing Date
16 Feb 2026, 5:00 pmClosed
GM_PROJECT
GNIDA OFFICE
Construction of Shed and Chabutra of Old Shamshan Ghat and Boundary Wall of Kabristan in Village Palla, Greater Noida.
2026_GNIDA_1112638_9
SM/(E-TENDER CELL)/2026/711 DATED-02.02.2026
Open Tender
Civil Works
270 days
GREATER NOIDA
REFER TENDER DOCUMENT
5 documents required · 5 mandatory
₹2,280
₹2.2 L
23 Jun 2026
6 Feb 2026
18 Feb 2026
6 Feb 2026
16 Feb 2026
6 Feb 2026
Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. (DSR-18/15.3)
Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.
In cement mortar (DSR-18/15.7.4)
Earth work in cutting or in embankment in ordinary soil , excavation to be in the from of regular pits not exceeding 0.50 M. in depth and earth work in embankment to be in 20 cm. layers including remming and dressing the surface to required levels and slopes and also including 1.50 M. lift and 30 M. lead. the earth from cutting to be used in making embankment or to be deposited as spoil banks with-in 30M. distance as directed by the Engineer incharge. excluding royallity wherever applicable for small work or abadi area. (Where machine con not reach/move) SOR-20/253(A)
Cartage of earth or fly ash when added to schedule item no. 253.
Iind Km. and beyond SOR-20/261C
Excavation in foundation in ordinary soil(Loam, clay or sand) including lift upto 1.50 M. and lead upto 30 M. and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in-charge upto a distance of 30 M. from the foundation trenches. (Where machine con not reach/move). For Building work only (SOR-251a)
Depth from 0.00 to 1.50 M below
Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks. DSR-18/11.2
Cement concrete with 4cm gauge approved stone ballast, coarse sand & cement in the proportion of 8:4:1 including supply of all materials, labour, tools & plants etc. required for proper completion of the work. (UPPWD/SOR-2020/281)
Providing and laying I shaped interlocking tiles Rubber Moulded 80mm thick precast cement concrete having plan dimension 200 x (160+120mm) with compressive strength not be less than 40Mpa (M-40 and weight 5Kg, laid in required pattern over and including average 50mm thick compacted bed fine sand and filling the joints with fine sand all complete as per direction of Engineer-in-Charge with conforming to ISI-15658-2006 (SOR/A.R) Grey colour.
Plain/Reinforced cement concrete in open foundation complete as per drawing and technical specifications RCC Grade M-25 using batching plant transit mixture and manual placing (MORTH-20, Item No. /9.06/E/case-II)
Plain/Reinforced cement concrete in open foundation complete as per drawing and technical specifications RCC Grade M-25 using batching plant transit mixture and manual placing (MORTH-20, Item No. /9.06/E/case-II)
M-150 Brick Work1:4 one cement & four Coarse sand of 2.20 F.M. mortar in foundation and plinth including supply of all materials, labour and T&P etc. requried for proper completion of the work. SOR-2020, item-305(a)
M-150 brick work in 1:4 one cement and four coarse sand 2.20 F.M. mortar including supply of all material, labour, T&P etc. required for proper completion of the work. But in superstructure including necessary Cutting & moulding of brick as required thickness of walls not to be less than 1½ brick. Add extra labour to above items. (UPPWD/SOR-2020/309)
12 mm cement plaster of mix
1:6 (1 cement: 6 coarse sand) DSR-18/13.4.2
Cement concrete with 2cm gauge approved stone ballast, coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour, tools & plants etc. required for proper completion of the work. (UPPWD/SOR-2020/279(a))
Plain Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. PCC Grade M25 using batching plant transit mixer & manual placing . MORTH-9.06 D/Case-II
Finishing wall with water proof cement paint of approved make and quality on new wood with two coat to give an even shade including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. (UPPWD/SOR-2020/660)
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. (Sail Steel) (DSR-2018/10.25.2/AR)
Painting or varnishing with valsper or other approved high grade enamel or super par synthetic clean varnish complete one coat over previously painted surface including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used should confirm ISI no. 105/106/133-1950.As in item (647) above but for every subsequent coat on previously treated surface SOR-647+648
Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
1.00 mm thick with zinc coating not less than 275 gm/m² DSR-18/12.1.1
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
Thermo-Mechanically Treated bars of grade Fe- 500D or more.(Sail Steel) DSR-18/5.22.6
Washed stone grit plaster on exterior walls of height upto 10 M. above level in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings ,complete as per specification and direction of Engineer-in- charge (Payment for providing grooves shall be made separately). DSR-18/13.72
Forming groove of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge:
15 mm wide and 15 mm deep groove. DSR-18/13.73.1
Supply & fixing of R.C.C.Grill work (JALI) of approved pattern & make at site of work in cement concrete consisting of cement, approved coarse sand and 6 mm. nominal size stone grit inthe proportion of 1:2:4 & reinforced with 6 mm. dia M.S. wire/bar including cutting & finishing with 1:3 cement & fine sand of 1.25 fineness modulus mortar including supply of all materials, labour, tools and plants etc. required for proper completion of the work but excluding plaster on jambs, sill & soffit of the opening. 5.00 cm thick. SOR-20/Item no. 21.17
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:
a) Applying a slurry coat of neat cement using 2.75 kg/sqm. of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment.
b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115mm size with 50% of cement mortar 1:5 (1 cement: 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs
C) After two days of proper curing applying a second coat of cement slurry using 2.75kg! sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge.
d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement: 4 coarse sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge including laying glass fibre doth of approved quality in top layer of plaster and finally finishing the surface with trowe’ with neat cement suvr an making pattern ot 300x300 mm square 3mm deep.
e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge:
With average thickness of 120mm and minimum thickness at khurra as 65 mm. DSR-18/22.7.1
D/I/T/C tubewell boring of 150 mm dia including all material and labour complete PVC boring pipe and stainer of make finolex/ kisan/ supreme approved by engineering in charge of boring 200 feet.
Supply and fixing sumersible motor pump CRI make of 3HP fixing and all material & labour complete
Supply of garden bench having total weight = 70.75 kgs. Size 5ft. Length having casted iron sides of each with frp strips
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.DAR-18/11.36
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.
Size of Tile 600x600 mm DSR-18/11.46.2
Distempering (first coat) with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as Berger, J&N, Shalimar, Asian Paint after thoroughly brushing the surface free from mortar dropping and other foreign matters and also including the surface even with plaster of Paris or approved synthetic materials and sand papered smooth including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. (SOR-20/649/15.09)
Providing wall putty on new surface with approved quality material of Berger/ J.K./Birla or similar make 2 coats.SOR-2020/New Item
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required
W.C. pan with ISI marked white solid plastic seat and lid
Providing and fixing brass bib cock of approved quality:
15 mm nominal bore. DSR-18/18.15.1
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :
White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps DSR-18/17.7.1
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.DSR-18/18.48
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
Flexible pipe 32 mm dia DSR-18/17.28.2.1
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore DSR-18/18.53.1
Providing and fixing uplasticised PVC connection pipe with brass unions:
30 cm. Length. 15mm nominal bore DSR-18/18.21.1.1
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS 2556, Cl. trap with outlet grating and other couplings in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever required:
Single half stall urinal with 5 litre P.V.C. automatic flushing cistern. DSR-18/17.5.1
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall
15mm nominal outer dia .Pipes. DSR-18/18.7.1
20 mm nominal outer dia .Pipes. DSR-18/18.7.2
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm. diameter (DSR-18/12.42.2)
Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc.
For 100 mm dia pipe. DSR-18/17.37.1
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board constwction with frame of 1St class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.
35 mm thick including ISl marked Stainless Steel butt hinges with necessary screws. DSR-18/9.20.1
Providing, laying, jointing and testing of PVC pipe (Finolex make ring fit) of following dia 6Kg/Cm2 including all specials & fittings etc. as required for proper completion of work (The contractor has to arrange the source of water and require head for testing). (AR/GNIDA)
90 mm dia (O.D.)
110 mm dia (O.D.)
Finishing wall with water proof cement paint of approved make and quality on new wood with two coat to give an even shade including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. Same as item 660 but for weather coat.(Asian or Berger Brand) SOR-20/660 New Item
Labour Cess and GST will be paid extra as per govt.orders
Please Enable Macros to View BoQ information
stage.html
html • 0.06 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 6.59 MB
BOQ_2058240.xls
BOQ • 0.28 MB
PreQ_Con_Shed_Shamshan_Bndry_Kabristan_Vill_Palla.pdf
Tender Documents • 1.19 MB
Download all tender documents and submit your bid