PROVIDING WATER SUPPLY IN POKHARIYA VILLAGE PANCHAYAT DURGA TOLA BORIO BLOCK FROM EXISTING SPRING WELL ETC. GROUP NO. WSIP

Part-A Developing of exsiting open well with covering RCC Slab and Renovation Work

Supplying diesel pump for dewatering well to clean & work as require

Supplying labours for cleaining well and prepraing sunface as required

Dismantalling Parapet of well upto 2.00 mtr which damage Portion

Supplying materials and labiours for providing following masonary work 1:4 in cement mortar in steining wall of well and parapet of well around in the platform complete

Suppling materials and labiours for providing 1:3 cement motar flush pointing in spring well Flush pointing in c.m 1:3

For extra each additional lift for 1M

Excavation manually upto 1.00 meter depth in existing well

Providing and constructing precast RCC perforrated ring dia 1.00 mm dia 50mm thick

Providing patent stone flooring for platform around parapet wall

Platform around Perapet Providing PCC 1:2:4 in platform 1.5 meter wide constructing around perapet

Providing precast RCC cover slab over well (1:1.5:3)

12 mm plaster thick cement plaster (1:6) cement mortar with neat cement punning on platform around parapet wall out side

Carriage of materials Manually engage

Part-B Installation of 5 H.P, 32 stage CRI submersible pump with cable wire, starter and pannel board.

Supplying / Providing CRI genie series 5 HP 32 stage single phase water filled borewell submersible pump-set

Providing 40 mm dia GI Pipe Tata Mark as equivalent as per IS-1239 (Part-01) 2004 ISI marked medium quality

Supplying and providing 2.5 sq mm ISI marked FR Ls PVC insulated single core copper conducter cable

Providing MDPE Pipe 20 mm dia for covering cable wire

Providing 5 KVA online UPS Single phase input and single phase output power system of input voltage range 110 V Ac +- 5%

Providing and fixing 63 MPS TPN swich disconecter fuse unit HRC fuse, analog volte meter, digital dual meter with on/off push button

Providing 200 AH tubular lead acid battery with 36 months replacement guarntee IS 1652:1991

PART-C-1 Construction RCC Foundation for Steel structure staging & Solar panel .

Earth work in excavation in foundation trenches in ordinary soil and disposal of excavated earth as obtained to a distance up to 50.0m ,including all lifts, levelling ,ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design ,building specification and direction of E/I

Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials ,labour ,royalty and taxes all complete as per building specification and direction of E/I

Providing designation 75 A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I

Providing nominal mix PCC M-150 of (1:2:4) in foundation with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M.2.5to 3 including screening shuttering mixing cement concrete in mixer and placing in position vibrating striking curing and royalty all complete as per building specification and direction of E/I

Providing RCC M-20 in nominal mix of (1:1.5:3) in columns with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M.2.5to 3 including screening shuttering mixing cement concrete in mixer and placing in position vibrating striking curing and royalty all complete as per building specification and direction of E/I. (a)Foundation for Steel structure staging Footing and Vertical Pedestal Raft

Column

Tie Beam

(b)Foundation for Solar panel Footing

Vertical Pedestal

Providing for steel reinforcement as per approved design and drawing excluding carriage of T.S. bar to work site cutting, bending with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/I (a)Foundation for Steel structure staging

Carriage of materials from different sources or departmental stores to work site including loading, transporting, unloading and stacking the materials at work site etc. all complete job. as per direction of E/I

Cement - 10 Km Avg. Lead

tone Chips- 20 KM Avg. Lead

Steel Reinforcement Lead 10 Km Avg. Lead

Bricks- 10 Km Avg. Lead

PART-C-2 Construction of galvanized tubular Steel structure staging for HDPE water storage Tank& Solar Panel.

Providing structural steel galvanised squre pipe section work in trusses, other similar trussed purlins and members with all bracing ,gusset plates etc as per detailed design and drawing or as directed by Engineer- in-charge ,including cutting fabricating ,hoisting , erecting and fixing in position , making riveted/bolted /welded connections and one coat of anticorrosive paint and over it two coat of all oil painting & For Structure(PLUS) Providing and applying materials &labour for hot dip galvanizing of above structure including transportation for galvanizing minimum thickness 80microns (Net wt. of components to be Galv) preferably TATA structural section etc complete.

HARDWARE (L.S.)

Information board for IEC Providing structural steel work in trusses other similar trussed purlins and members with bracing gusset plates etc as per detailed design and drawing or as directed by Engineer- in-charge including cutting fabricating hoisting erecting and fixing in position making reverted bolted welded connections one coat of anticorrosive paint and over it two coats of oil painting etc complete

Part C-3 Installation of 5000 liters Capacity Water Storage Tank

Providing and fixing HDPE container Syntex or alike one piecemolded water tank made out of low density polythyler andbuilt corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity 5000.00 litres Capacity Water storage Tan

Transportation Charge

Lifting of 5000 Litrs Capacity Tank up to 4.00m height with lifting tools with rope and labour

Making long screw in G.I. pipe including supplying and fitting jam nuts and extra socket etc.

Part-D Rising and Distribution Network with House Connection up to 35 Nos. including Platform & Stand post

Earth work in excavation in foundation trenches in hard soil (Vide Classification soil item B) and disposal of excavated earth as obtained to a distance up to 50 Mtr. including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I.

Rising Main Manufacture, supply and Delivery of following Nominal dia UPVC column pipes including PVC socket (Coupler), 32 mm dia HDPE Pipe

Distribution Providing and supplying High Density Polyethylene pipe (HDPE pipe) of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074 materials rates are Ex-factory excluding transportation, taxes and duties.

63 mm HDPE Pipe-

50 mm HDPE Pipe-

32 mm HDPE Pipe-

20 mm MDPE Pipe-

Providing and fixing Gun Metal Gate valve with C I wheel of approved quality(screwed end).

32 mm dia .

Providing and fixing Gun Metal N/R valve of approved quality 32 mm dia

Providing and supplying High Density Polyethylene (HDPE ) fittings of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074 materials rates are Ex-factory excluding transportation, taxes and duties.

Lowering, Laying and Jointing H. D. P. E./M. D.P. E. pipes in proper position including all specials by compression fitting/electro fusion and butt fusion jointing procedure as per relevant IS Code complete with all materials for jointing procedure like Electro fusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II.

For Rising

32 mm HDPE Pipe-

Distribution

50 mm HDPE Pipe-

32 mm HDPE Pipe-

20 mm HDPE Pipe-

Providing 15 mm dia. G.I. pipe Tata or equivalent make as per IS 1239 (Part 1/2004) ISI Mark /medium quality in Stand Post.

Supplying all materials , labour and tools for fixing 15 mm dia G.I. pipes with Red lead and yarn of following nominal bore with screwed and socketed joints on wall, ceiling and floor including supplying and fitting of wall hooks or pipe clamps, wooden plugs, cutting pipes to size and threading ends if required etc. all complete as per specification and direction of Engineer-in-Charge.

Supplying and fixing G.I. fittings of approved make all complete as per specification and direction of E/I.

(1) Elbow

(a) 15 mm dia.

(2) Reducer Socket -

(a) 20 x 15 mm dia.

(3) Nipple -

(a) 15 mm dia.

(4) Plain Socket -

(a) 15 mm dia.

Supplying and fixing G.M. ferrule of approved make in existing C.I./D.I. main Including drilling and taping C.I./D.I. main all complete as per specification and direction of E/I. 3 mm, 6 mm 10 mm dm ferrule weight not less than 425 gram.

Providing and fixing Gun Metal full way valve of approved quality, all complete, as per specification and direction of E/I.

50 mm dia and weight not less than 1.5 Kg.

65 mm dia Full way valve

32 mm Full way valve

Providing and fixing of male ended C.I.Body brass spindle valve and seat Bib cock of approved quality with extra socket all complete as per specification and direction of E/I.

15 dia and weight not less than 400 Gm

Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design.With common burnt clay F.P.S.(non modular) bricks of class designation 7.5. Full way valve chamber

Supplying materials , labours and equipment's for construction of 0.90M x 0.90 M size P.C.C. (1:2:4) Rectangular Platform with stand post in house including 12 mm thick cement plaster in C.M. (1:4) with neat cement punning over exposed surface all complete job, as per approved design, specification and direction of E/I.

Providing brick masonry chamber of inner size 600 x 600 x 450 mm deep for bore well protection having 125 mm thick wall and 75 mm R.C.C cover including cement plaster of exposed surface, etc all complete job

Earth work in back filling the trenches after laying different types and size of pipes with earth removed during excavation within initial lead and lift as per specification and direction of Engineer-in-Charge.