ADDN/ALTN OF BLDG No P-2A OF PROPOSED REGIMENTAL QG AND PROVN OF SOAKAGE PIT FOR OR GOVT MD ACCN BLDG No P-5 AND P-6 AND PSYCHIATRY WARD OF MH UNDER ZONE - II AREA AT JAIPUR MIL STN

Amount

Taking down cement plaster on brick or stone walls incl.raking out joints hacking for key scrubbing down with water complete all as specified and directed

Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed.

Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed.

Taking down shutters of any description of area exc 1 sqm but n exc 2sqm each complete all as specified and directed.

S&F factory made steel window with side hung shutters including box/projecting type hinges with steel handle and steel peg stay compete with glazing bars devetailed or welded incl inserting the holdfast in stone / brick masonay and make good the distrubed portion complete all as specified and as directed.

S & F factory made steel window with side hung shutters including box/projecting type hinges with steel handle and steel peg stay complete without glazing bars devetailed or welded incl inserting the holdfast in stone/brick masonay and make good the distrubed portion all as specified and as directed.

S & F factory made steel ventilator with top hung shutter including hinges, steel peg stay and handle complete all as specified and as directed.

S&F sheet glass 3.00mm thick ordinary quality and glazing with with oil putty in square n.exc 0.5 Sqm each pane complete all as specified and as directed.

M&L for PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in filling in pressed steel frames complete all as specified and as directed by Engineer-in-Charge

S&F Pressed steel frames of size 105mm x 60mm made of 1.25mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified.

S&F Factory made 35mm thick Second class hardwood plain, framed, panelled shutter (two panels) with lock rail and panel of 9mm thick B.W.P commercial ply or 12mm thick veneered particle board with commercial veneering on both faces; size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

M&L for preparing new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint (Ist quality) over a coat of pink primer complete all as specified and as directed.

Demolition of brick or stone boulders masonry work built in cement mortar or cement lime mortar including all quions, arches, pillars, etc but excluding ashlar facings,dressed stone work and precast concrete articles all as specified

M&L for brick work with sub-class 'B' bricks (using old size bricks), straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:6, finished even and smooth w/o using extra cement complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4 finished even and smooth w/o using extra cement complete all as specified and as directed.

M&L preparation of old decorated surfaces including brooming down and cleaning the surfaces and applying two coat of white wash on ceiling surfaces complete all as specified & as directed.

M&L preparation of newly plastered surface of wall, pillar, cornices etc and applying two coats of distemper (oil emulsion) (Ist quality) of approved tint over and incl a coat of primer complete all as specified and directed.

S&F Preparation of newly plasterd surface of wall and applying two coat of cement base paint (Ist quality) in plain pattern over a coat of alkali resistant priming paint complete all as specified.

M&L for preparation of new plastered surface and applying a thin layer of wall care putty on wall complete all as specified and as directed.

M&L preparation of old painted steel surfaces of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint (Ist quality) of approved tint complete all as specified & as directed.

M&L preparing old painted wooden surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint (Ist quality) of approved tint complete all as specified & as directed.

S&F complete removal of existing treatment of walls and applying two coat of cement base paint (Ist quality) in plain pattern on walls over a coat of alkali resistant priming paint complete all as specified.

Dismantling wrought iron or mild steel, including gates work of any description not otherwise provided for complete all as specified and directed.

M&L for Rolled mild steel conforming to Gde Fe 410 W gde E-250 Quality A in joist, channel, angle or tee sections, fixed independently, without connecting plates etc (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified and directed.

M&L for prearation of new steel surface of any description, over 10cm in width and girth not otherwise described and applying two coat of synthetic enamel paint (Ist quality) over and incl one coat of red oxide (zinc chrome) primer complete all as specified and directed.

S & F 100 mm butt hinges medium weight cold rolled mild steel and fixed complete all as specified and as directed.

S & F 150mm long mild steel barrel tower bolt stove enamelled black with bright bolt and fixed complete as directed and specified.

S & F 250mm long mild steel sliding door bolt plate type stove enamelled black with bright bolt not less than 12mm dia with & including a min of six bolt & nut, four on bolt plate & two on staple plate and fixed complete as directed and specified.

S & F 150mm long mild steel pressed handles oval type stove enamelled black complete as directed and specified.

S&F stainless steel wire cloth, 0.36 nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed

Taking down eaves gutters and rain water pipes (any size or pattern ) including fittings heads, shoes bends swan neck etc complete all as specified and directed

S&F 110 mm bore PVC(SWR) ventilation and rain water pipes single socketed in any length with rubber ring joints fixed to wallls with suitable size clamp complete all as specified & directed.

S&F 75 mm bore PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to wallls with suitable size clamp complete all as specified & directed.

S&F 110mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends of any radius complete all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L for light shade vitrified ceramic tiles 10mm thick ( square/rectamgular) polished, area of each tiles exc. 0.36 sqm but n exc 0.42 sqm in floors set and jointed in neat cement slurry and pointed in coloured cement to match the floor laid over and incl 15mm thick screed in cement mortar 1:6 complete all as specified and directed.

M & L for light shade full body vitrified ceramic tiles 10mm thick (square / rectangular) area of each tile exc. 0.36 sqm but n exc 0.42 sqm in vertical surface such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified & directed.

M&L for coloured non skid ceramic tiles 300 x 300 x 7mm thick in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match the floor laid over and incl 15mm thick screed in cement mortar 1:6 complete all as specified and directed.

M & L for coloured Glazed ceramic tiles 350X450mmX7mm thick in vertical surface such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified & directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frame or stone concrete or brick surrounds glazed with putty or fixed with beads complete all as specified & directed.

Taking up or down 15 mm bore galvanised steel tubing and connections including cleaning for refixing or removal from site complete all as specified and directed by Engineer -in-charge.

S & F 15mm bore GI tubing medium grade with all necessary fitting, fixed to wall or concealed or fitted to ceiling or laid under floor complete all as specified and directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

S&F in repairs Vitreous china wash down water closet pan, white, pedestal pattern complete, including connection to drain pipe and to flushing pipe antisyphonage pipe incl P or S trap (excluding flushing cistern and flush pipe) incl plastic water closet seat back closed pattern with flat bottom cover and mild steel chromium plated or aluminized hinging device etc complete all as spd & directed

S&F in repairs PVC valveless, syphonic action type flushing cistern low level 10 ltr capacity white, with intel, ball valve, float and handle including brakects, flushing pipe complete all as specified & as directed.

S&F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified & as directed.

S & F in repair 75mm dia outlet cast iron floor trap with grating including jointing to wastage pipe fixed in cement concrete 1:2:4 type B-1 and removing of old trap any type and shap complete all as specified and directed.

S&F in repairs 15 mm bore stop valve/ angle valve fancy type cast copper alloy chromium plated, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair Towel rail 600mm long of cast copper alloy, chromium plated fixed with brass screws complete all as specified and directed by Engineer-in-charge.

S&F in repair vitreous china wash hand basin white Flat back of size 580x450mm, long screwed shank fly nut flange end including cutting for and pinning in ends of brackets in 1:3 CM excluding waste coupling/trap complete all as specified and directed by Engr-in-charge.

S&F in repairs PVC waste pipe flexible 32mm dia for WHB incl 32mm dia chromium plated waste coupling/trap complete all as specified and directed.

S&F 15mm bore central hole basin mixer for mixing hot and cold water brass chromium plated fancy type screwed down long sunk and fly nuts screwed for 15 mm dia as per approved by Engr-In-Charge

S&F Floor door stopper of brass body and tongue, anodised, with hard drawn steel spring, fixed in floor; overall length of cover plate 150mm complete all as specified and directed.

Dismantling false ceiling board or insulation board etc, any thickness including snap grid frame etc complete all as specified.

S&F GI snap grid false ceiling system with roll - formed made out of hot-dip galvanised iron steel grid comprising of 24mm wide T-Section exposed flanges which shall be powder coated, white, main runner made from 0.33mm thick galvanised steel sheet and size 24x32mm and spaced at 1200mm center to center fixed to structural soffits by approved hangers of GI wire 4mm dia 1200mm centre to centre using approved rawl plug, fastener, screw. The las hanger at the end of each main runner shall not be greater than 450mm from adjacent wall, flush fixing of 120mm long cross tee (with double stitching) to be interlocked between main runner at 600mm centre to centre, size 600x600mm module, cross tee longer than 600mm to be supported independently on 600x600mm module to be formed by fixing 600mm long cross tee centrally between 1200mm cross tee. Tee parameter wall angle shall be off 0.45mm thick GS sheet size 19x19mm and 300mm long of white colour incl 12 mm thick medium density fibre board,exterier grade fixed to grid frame all as per manufacturer instructions complete all as directed

S&F powder coated (minimum thickness of powder coating not less than 50 micron) anodised aluminium frame for doors, windows, ventilators, partitions etc with one or more rebates including joining cleat for fixing etc. complete all as specified & as directed.

S& Solar control film 25 micron relfective type sticked to glass panes as per instructions of manufacturers complete all as specified & as directed.

S&F 5.5 thick sheet glass, ordinary quality for Aluminium door, window and Ventilator and glazing with aluminium beads and neoprene gasket fixed with metal panel pin in square n.exc 0.5 Sqm each complete all as specified & as directed.

M&L 9mm thick prelaminated particle board, interior grade, preliminated both side with decorative choice lemination & fixed with screws to timber or aluminium door/partition work complete all as specified & as directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified & directed.

S & F 200mm square chromium plated shower roses with or without swivel joints, with CP arm 150 mm long any size, including fixing to steel pipe or union complete all as specified and directed by EIC.

S&F 15mm bore chromium plated brass sink mixer, fancy type, with regular spout for mixing hot and cold water complete as specified and directed by Engr In Charge

S&F Glass shelf 300 mm with brass brackets fixed with chromium plated brass screws complete all as specified and directed

S&F soap dish, stainless steel, approx size 160x160x90 mm fixed with chromium plated brass screws complete all as specified and as directed.

S&F toilet paper holder of stainless steel fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.

S&F Tumbler holder stainless steel with suitable fixing arrangements complete all as specified and directed.

M & L 15mm bore bib tap fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs,pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed

S&F Rough cast wired glass, 6.4 mm thick and glazing with oil putty in square size exc 0.50 sqm but n exc 0.75 sqm incl solar control film 25 micron reflactive type to glass panes as per instruction manufacturer complete all as specified & directed .

S & F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste pipe including fixing cantilever brackets and connecting union to pipe, waste pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Taking down existing roof treatment complete including demolition of PCC, Mud phuskas, lime concrete etc any description upto mother slab, and properly cleaning the surface to remove loose particles with wire brushes and removing the debris out side of MoD land complete all as specified and as directed by Eng- In-Charge.

M&L screed plaster 15mm thick in cement mortar (1:4) on concrete surfaces of roof to receive water proofing treatment and finished the surface even and smooth without using extra cement etc incl mixing of WPC as per manufacturers instruction complete all as specified and directed. Note : WPC shall not be paid seperately

M&L water proofing treatment to roof surface by applying with a coat of cold aplied bituminous primer @ 0.40 ltr/Sqm conforming to IS-33894 and laying APP based polymeric membrane not less than 3mm thick, weighing not less than 3.5kg/sqm, reinforced with polyester non woven fabric (weighing not less than 150gms/sqm) shall only be used. It shall be laid by torch application. Side over laps shall be 75mm and the end lap shall be 100mm and all over laps and joints shall be sealed by torch application. For parapets, membrane shall be taken to a height of minimum 60cm and then inserted inside the parapet groove. This shall be finished by a membrane flashing including two coats of aluminuium paint over APP membrane as per manufacturer instructions complete all as specified and directed. Note: roof treatment to be done through authorised applicator only

M&L for surface preparation by removal of all loose particle to ensure clean, smooth and dry surface and laying 25mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) on roof surfaces finished even & smooth without using extra cement to cover negative slope into prop complete all as specified and directed

Dismantling old unserviceable RCC / PVC water tank of capacity exc 250 ltr but n exc 500 ltr & removal from site complete all as specified and directed

S & F 500 Ltrs capacity rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc complete all as specified in SSR Part I and directed by Engr in charge.

S & F Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 15mm dia complete all as specified and directed. Note : Min weight for 15mm - 142gm

S & F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, with ornamental and intricate design complete drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and incl either hooks and pintal hinges or steel hanging door fittings (exclusive of steel, sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete confirming to Fe-290 Gde-E-165 complete all as specified and directed

Excavation over areas n exc 1.5m deep and getting in soft/loose soil complete all as specified and as directed.

Excavating over areas exc 1.5 m & n exc 3m deep and getting out in soft / loose soil complete all as specified and as directed.

Excavating over areas exc 3 m & n exc 4.5m deep and getting out in soft / loose soil complete all as specified and as directed.

Excavating in trenchs, n exc 1.5m wide and n exc 1.5m in depth for foundation, etc. or for laying of cables n exc 10sqm on plan and n exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.

,---ditto--- all as per item No 1 above but depth exc 1.5m but not exc 3m complete all as specified and directed.

Removing excavated material to a distance n exc 50 m and deposited where directed at a level n exc 1.5 m above the starting point complete all as specified and as directed.

M&L Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

M&L PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and directed.

M&L for Walling of random rubble, uncoursed, well bonded, laid dry in retaining walls, abutments and similar work complete all as specified and directed.

M & L for loose filling with aggregate of broken stone or boulder of gauge 80 to 150 mm in soakage pits, soakage wells complete all as speciifed and directed.

M&L for formwork to rough finished surface of edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as speciifed and directed.

M&L for formwork to sides and soffits of suspended slabs such as roof slab, floor slabs landing horizontal or slopping and similar works thikness n.exc 200mm including neccesarry sufficient supports for flat and rough finished surfaces of concrete etc complete all as specified and directed by Engineer-in-Charge.

M&L for providing RCC 1:2:4 (nominal mix) type B-1 (using 20 mm graded stone aggregate) in slab supported on walls , beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. Note : Reinforcement & formwork shall be measured and paid for separately.

S&F Mild steel TMT bar 10 mm dia & over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as directed and specified.

,---ditto--- all as per item No 96 but 5mm dia and over up to and including 10mm dia complete all as specified and directed.

S&F 100mm bore cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, lfixed to wall complete all as specified and directed.

S&F 100mm bore cast iron cowls complete all as specified and directed.

M&L for cutting into existing manholes for connecting new drain of 150mm internal dia of pipe making food to pipe and rendering cutting out existing benching for and forming branch chanel (1/2 round or 3/4 setion)in cement concrete (1:2:4) typeB1 smooth finished and reforming benching as required complete all as specified & directed .

Supply & laying DWC pipe (Double wall corrugated ) of class SN-4, IS-16098 (Part –II) of size internal dia of 150 mm, laid in trenches and jointed complete with coupler, bend, Tee, reducer etc complete all as specified & directed . Note : Earth work shall be measured and paid seperately

M & L Brick work with sub class ‘B’ bricks (using old size bricks) straight or curved on plan exc 6 mtr mean radius built in CM 1:4 including raising height of man holes from ground level complete all as specified and directed

M&L for rendering 15mm thick on stone masonary or other than fair faces of brickwork in cement mortar 1:4 finished even and smooth w/o using extra cement complete all as specified and as directed by Engineer-in-Charge.

M&L providing precast cement concrete, type B1, 1:2:4 (20 mm graded aggregate ) set in cement mortar 1:6 in landing, cover slabs (for manholes etc.) chullah hoods,chajjas,water troughs, mangers,shelves and similar articles with plain faces including chamfers, weathering, throating etc and incl form work complete all as specified and directed Note :- Reinforcement shall be measured and paid separately.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc (inner girth only to be measured) complete all as specified and directed.

M&L PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in surface channels and drains and benching including finishing the top of benching even and smooth with using extra cement complete all as specified and directed.

E/M portion Taking down carefully surface aluminum /copper point wiring, casing capping /PVC concealed conduit for (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling rose, regulators, sockets, light fittings etc and making good disturbed surfaces complete all as specified and directed.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concelled rigid non matalic PVC conduit medium grade not less then 20mm dia ISI marked with all conduit fittings/fixing accessories with modular metal flush box of thickness not less then 1.0mm thick covered with modular white sheet cover plate and frame for mounting, switches, sockets, fan regulators for one light point controlled by one switch incl making good the disturbed portion complete all as specified and directed.

,---ditto--- all as per item No. 108 above but one fan point controlled by one switch complete all as specified and directed.

,---ditto--- all as per item No. 108 above but for one bell point controlled by one bell push complete all as specified and directed.

,---ditto--- all as per item No. 108 above but for socket outlet 6 Amps controlled by one switch on the same board with other swithces complete all as specified and directed.

,---ditto--- all as per item No. 108 above but socket outlet 6 Amps controlled by one switch on independent board complete all as specified and directed.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 4 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 4 sqmm (Green) drawn into and including concelled rigid non matalic PVC conduit medium grade not less then 20mm dia ISI marked with all conduit fittings/fixing accessories with modular metal flush box of thickness not less then 1.0mm thick incl covered with modular white sheet cover plate and frame for mounting, switches, sockets, fan regulators for one 3 pin, 16 Amps socket outlet point controlled by one swith on independent board incl making good the disturbed portion complete all as specified and directed.

S&F angle holder, insulated polycarbonate body with back plate complete all as specified and directed.

S&F door bell AC 240 volts, single pole complete all as specified and directed.

S&F ceiling rose 3 plates polycarbonate body complete all as specified and directed.

S&F switch modular 1 way 6 Amps, 230 volts, 1 module complete all as specified and directed.

S&F modular socket 6 Amps, 2/3 pin combined 2 module AC 230 volts complete all as specified and directed.

S&F modular switch 1 way 16 Amps, 230 volts, 1 module complete all as specified and directed.

S&F modular socket 6/16 Amps, 2/3pin combined 2 module AC 230 volts complete all as specified and directed.

S&F modular bell push, flush type, 6 amp AC 240 Volts complete all as specified and directed.

S&F modular fan regulator 120 watts, 2-module AC 240 Volts complete all as specified and directed.

Taking down carefully sub main wiring with PVC casing capping / PVC surface conduit and making good disturbed surfaces complete all as specified and directed.

M&L for sub main wiring with two run of 6 Sqmm single core, PVC insulated, unseathed, FRLSH multistranded copper conductor cable alongwith one run of 6.0 Sqmm earth wire as earth continuity conductor (Phase-Red, Neutral-Black, Earth-Green) drawing into and including concealed PVC conduit of 25mm dia ISI marked ivory colour & accessories of suitable size including making connection as required complete all as specified and directed. NOTE - Two run of 6 sq.mm phase and neutral wire & One run of 6 sq.mm earth wire & One run of PVC conduit with accessories shall be measured as One length.

,---ditto-- all as per item No. 124 above but two run of 10 Sqmm and one run of 10 Sqmm earth in 25mm dia PVC conduit complete all as specified and directed.

Taking down MCB distribution board with incoming and outgoing controls any make and capacity after disconnecting complete all as specified and directed.

S&F MCBs Distribution board tripple pole and neutral (VTPN) 4 ways, powder coated, CRCA steel sheet, suitable for MCCB incomer upto 160amp, degree of protection IP-43, IK09 with reversible double door, 415V, recess mounted having insulated 250 amp tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plate in unused spaces as required, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete all as specified and directed. Note : MCCB, MCBs and MCB DB shall be of the same make.

S&F MCBs Distribution board SPN, 8 ways, powder coated, CRCA steel sheet, degree of protection IP-43, IK-09 with reversible double door, 415V, recess mounted having insulated 100 amp tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, blanking plate in unused spaces as required, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete all as specified and directed.

S&F MCBs of 'B' curve single pole 6 to 32 Amps having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete all as specified and directed.

,---ditto-- all as per item No. 129 above but MCB double pole 10 to 32 amps complete all as specified and directed.

,---ditto-- all as per item No. 129 above but MCB double pole 40 to 63 amps complete all as specified and directed.

,---ditto-- all as per item No. 129 above but MCB tripple pole 40 to 63 amps complete all as specified and directed.

S&F MCCB four pole, 63amp, 415 volt, adjustable type, with breaking capacity 16KA, thermally adjustable between 70 to 100% including 4 spreader link set of same make as that of MCCB including reqd cable connections with copper lugs of suitable size and testing & commisioning and make good complete all as specified and directed.

S&F LED batten (1.2M) made of CRCA sheet housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficiency of 115 lumen per watt and total power consumption not more than 20 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a colour temperature of 6500K, CRI>80, THD<10% and PF>0.95 complete all as specified and directed. Make - Philips Cat part BN308C LED20S-6500 L120 PSU WH, Crompton Cat part CIS-305-40-57-SL-DP-NWH, Havells Cat no STOUTPLUS600BS20WLED840SPCWH.

S&F LED batten (0.6m) made of CRCA sheet housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 900 lumens at a minimum system efficiency of 115 lumen per watt and total power consumption not more than 10 watt including driver. It has a rated system life time of 50000 burning hours at L70 and should have a colour temperature of 6500K, CRI>80, THD<10% and PF>0.95 complete all as specified and directed.

S&F LED bulk head light fitting 9 /10 watt IP 66 & IK 09 with pressure die cast aluminium housing & polycarbonate body with LED driver duly prewired connection with 0.75sqmm PVC insulated & sheathed three core flexible multi stranded copper conductor cable complete all as specified & directed.

Supply and fixing energy efficient recessed mounted LED luminaire suitable for 2'x2' grid ceiling with full glow fully diffused diffuser and lumen output of 3600 lumens having constant current electronic driver of 36 watt duly connected with 0.5 sqmm white colour PVC insulated & sheathed three core flexible multi stranded copper conductor cable as required complete all as specified & directed.

S&F greenline high efficiency LED light luminaire 35 watt complete with driver, pressure die cast aluminium housing, UV stablized polycarbonates cover, inbuilt power unit, IP-65 protection including mounting bracket made of 25mm GI pipe, medium grade ISI marked not less than 1.2m, bend in shape, fix with 02 no clamps, nut, bolt and washers as reqd and painting the bracket with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.

S&F ceiling fan 1200mm sweep 50 Hz AC 230 votls, 5 star rated in white colour with BLDC fan motor, blade set, 0.45 mtr down rod, canopy set, rubber reel including 0.5 Sqmm three core PVC insulated flexible copper conductor multistranded wire from fan motor to ceiling and writing MES No. on fan body as required complete all as specified and directed. Note: Old ceiling fan shall be returned to MES store

M&L for taking out ceiling fan 1200mm sweep 50Hz AC 230 volts and refixing at new location including minor repair and replacement of fan blade, down rod, nut, bolt and washer or spray painting in existing colour including 0.5sqmm thre core PVC insulated flexible copper conductor multistranded wire from fan motor to ceiling as required and writing MES No. on fan body complete all as specified and directed.

S&F exhaust fan, high speed, steel body 225mm sweep, 1200 RPM, four blade, heavy duty motor, copper wound double ball bearings, grey colour with louver, nuts, bolts and washers fixed in wall incl making suitable size of hole in brick/stone wall and making good the disturbed portion as per existing incl three core 0.75sqmm copper cable connection with protective steel bird guard complete all as specified & directed.

M&L for earthing with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of steel bolts, nuts, check nuts and washers all as shown in electrical plate no 3 of MES Schedule Part-I connected to earthing point and testing on completion with and including 15 mm bore light grade G.I. protection pipe (upto 7.5 metre beyond outer edge of earth pit) making PCC pit of size 0.3m X 0.3m X 0.3m (inner size) in mix 1:3:6 type C1, 40 mm thick cover reinforced with 6 mm dia M.S bars, 3 nos both ways with lifting hook made out of 8 mm dia bar, watering arrangement with funnel and wire mesh and 20 mm bore light grade G.I. watering pipe, common salt and charcoal filling, including necessary excavation and earth work and testing on completion to achieve value not more than 2.0 ohm complete all as specified and directed.

S & F in repair 20amp, single pole and neutral socket outlet, with 2 pole and earth, metal enclosed plug top in powder coated CRCA steel sheet enclosure recess mounted with chained matel cover for socket out let with and incl one single pole B curve MCB 20 Amps complete all as specified and directed.

S&F water heater 25 litre capacity BEE star rating 5, approved colour, heating element 2.0 KW, adjustable temperature setting knob for temperature setting between 25° C to 75° C and avoid over heating of water outer tank made of metal, inner tank made of extra thick superior cold rolled steel provided with high density PUF insullation complete with all accessories such as safety valve, thermostate, NRV, etc. complete all as specified and directed.

S&F in repair heavy duty stainless steel connection pipe, 15 mm bore 450 mm, suitable for hot and cold water, premium quality, 304 grade stainless steel alongwith copper inner joint, EPM tube with two numbers brass chromium plated nuts at end alongwith double ring sealing washer to prevent leakage complete all as specified and directed.

S&F in repair 15mm bore stop valves, cast copper alloy, fancy type, chromium plated, screwed down high pressure with crutch as butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed.

Dismantling and taking out UG cable any size and fixed in any position and removal from site complete all as specified and directed.

Supply, laying, jointing, testing & commissioning LT under ground cable XLPE insulated, screened PVC bedded, galvanised steel strips or wire armoured, heavy duty with multi stranded aluminium conductor, 1100 volts grade (ISI marked) laid in trenches, ducts, pipes or fixed on poles of size 50 Sqmm 3.5 core including all necessary clamps, nut, bolt washers complete all as specfied and directed .

M & L Sand cushioning to under ground cable with screened and washed sand (non cohessive), 8 cm before laying cable and 15cm after laying and punned to 18cm after laying of cable complete all as specified and directed by Engineer-in-Charge. Note : Punned thickness shall be considered for payment purpose.

M & L bricks for protection cover to UG cable (using old size sub class B bricks) with width equal to length of brick, laid dry and flat abutting each other with gaps between adjecent bricks not exceeding 10mm complete all as specified and directed.

S & F 50 mm bore GI tubing light grade with all fittings, fixed to wall/ pole / laid in road crossing etc as reqd for protection of cable complete all as specified and directed. Note : Cost of MS clamp, nut bolt, washer and GI fittings etc shall be inclusive in the quoted rates.

Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ

UNIVERSAL INFRAPROJECT PVT LTD (BID ID -3161847)

MSR INFRATECH (BID ID -3169011)

JAGDAMBA CONSTRUCTION COMPANY (BID ID -3169103)