ALANGANALLUR TOWN PANCHAYAT, CONSTRUCTION OF 1.00 MLD STP CUM FSTP UNDER SBM 2.0 AT SURVEY NO.354, 355 AT ALANGANALLUR TOWN PANCHAYAT

Amount

CONSTRUCTION

Earth work open excavation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the departmental officers and clearing and levelling the site, etc., complete complying with standard specification.

Earth work open excavation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the departmental officers and clearing and levelling the site, etc., complete complying with standard specification.

For Drain:

Removal of excess excavated earth from the site and dumping away from the location.

Refilling with excavated earth other than sand with an initial head load of 100 mts. and depositing the earth as shown by the departmental officers in layers well rammed, watered and consolidated etc. complete complying with standard specification

Supplying and filling in foundation, basement, etc with filling sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Supplying and filling in Foundation with Sand Gravel Mix in the ratio of 1:1 with 0.685 Cum of sand and 0.667 Cum of Gravel in layers of not more than 15cm thick well rammed, watered and consolidated by using mechanical earth rammer etc. complete complying to standard specifications

Cement Concrete 1:4:8 (One Cement, Four sand and eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick, well rammed, consolidated and curing etc. complete complying with standard specification and as directed by engineer in charge

Providing and laying in position, Standardised Concrete Mix M-30 Grade in accordance with IS:456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 400 kg/mᶾ and maximum water cement ratio of 0.45, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m.) 7670 kg. of sand, but excluding cost of reinforcement

grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials)

Providing and Iaying in position, Standardised Concrete Mix M-20 Grade in accordance with IS:456-2000, using 20 mm and down graded hard broken granite, stone jelly for all RCC items of works with minimum cement content of 400 kg/m³ and maximum water cement ratio of 0.45, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 m³) 7730 Kg. of 20 mm machine crushed stone jelly and with about (3.3 m³) 5156 kg. of 10 - 12 mm machine crushed stone jelly and with about (4.79 m³) 7670 Kg. of sand, but

excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra, etc complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards.(Sl.No:39.a)

Supplying, fabricating and placing in position TMT bars (Fe 500) for all RCC works as per design given including cost of steel and G.I. binding wire for placing at all depths of excavation, complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel, binding wire and for bar bending)

Centering/ Shuttering

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid)

For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.

Beam & slabs

Brick work in CM 1:5 (one cement & five sand) using Third Class Country Brick Kiln Burnt of size 8"X41/4"X 2 3/4" including finishing, curing, etc., complete complying with standard specification

Flooring with following plain ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Plastering with cement mortar 1:3,10 mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications

Providing 12 mm thick cement plaster in one coat in external surface with 1:5 cement mortar mixed including scaffolding and curing and also complying with standard specifications and instructions of the engineer in charge.

Providing 20 mm thick cement plaster in one coat in 1:5 cement mortar mixed with water proofing agent , including scaffolding and curing and also complying with standard specifications and instructions of the engineer in charge.

Filler

Collection supply and filling of well gravel filling approved quarry including cost and Conveyance of all materials to site and all labour charges for filling etc., Complete.

Providing and fixing uPVC pipes (Soil and waste line) of required diameter conforming to I.S.-13592, and I.S.-4985 to withstand continous internal hydroulic pressure of 6 kg/cm2 including necessary fixtures and fittings, such as bends, tees, single junctions, double junctions and joining with rubber rings and lubricants, on wall by means of clips or in ground including necessary excavation, laying refilling, trench testing etc. complete. (Prior approval of sample and brand by Engineer in charge is necessary before use.)

6 inch dia pipe

110 mm PVC pipe

4 inch bend

4 inch dia elbow

2 inch Dia inlet

Supply and fixing of 4" MS pipe clamp

4 inch dia Union

4 inch dia Tee

Supply and fixing of precast perforated slabs including all 2

50 mm PVC pipe

Supply, and fixing in position of Fire Fighting Application Hose of 63mm dia of 15 metres length binded by copper wire with 63mm dia stainless steel male and female instantaneous fire fighting special coupling as per IS 901 as directed by the Departmental Officers. Near every hydrant points including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR/ LIFE GUARD / SAFE GUARD / EQUIVALENT.

Supply and Installation of nyloneropes 20 to 30mm

Supply and installation of submersible centrifugal sewage non-clog pumps Pump - 7.5HP,15m head with150 Cubic Meters delivery per hour with Panel Board and all other fittings(1 Working + 1 Standby)

Supply, installation and commissioning of solar power sludge pump (1 numbers) and water pump (1 no.) of approved make. Includes civil works, fabrication work for mounting the pump, neccesary plumbing accessiores with flow control valves, non returnable valves and spill back arrangement. (For 3 HP including cost and conveyance of all materials, fixing and commissioning charges etc., complete)- Kirloskar pump

Pump 5 hp

Supply and delivery of direct online starter confirming to IS13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/Three Phase/50HZ(± 5%) and 415V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 2 pole MagneticContactor with under Voltage protection, Indication lamp, starting capacitor, running capacitorand On/Off Push button switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copperPVC insulated cable, powder coated vermin proof box including the capacitor (the cost ofcapacitor is to be taken separately).

For 3HP

For 5HP

Manhole

Providing and fixing Stainless steel grill work for screening of wastewater as per drawing including fixtures, necessary welding and finishing

Weld grill with vertical sloping 5 mm thick bar placed at a distance of 3 cms / 1.5 cm and dimensions of 700 mm x 600 mm

Weld grill with vertical sloping 5 mm thick bar placed at a distance of 1.5 cms and dimensions of 700 mm x 600 mm

Supply & fixing of FRB materials manholes cover including necessary laying -600mmx600mm

Manhole (600 x 600)

Manhole (450 x 450)

Supplying of polished cuddapah slab of 20/30 mm thickness including laying to correct alignment as direct by engineer in charge. Includes fixing the slab to support structures.

Providing and laying of coarse aggregate size as below after washing & sieving to make it free from fines & dust.

Passing through 50 mm & Retained on 40 mm sieve

Passing through 20 mm & Retained on 16 mm sieve

Passing through 10 mm & Retained on 6 mm sieve

River fine sand 1-2 mm

Providing and laying porotherm brick wall The porortherm brik should be of the size 40 x 20 x 20 cms and the opening should be on both the ends

Roof of SDB

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification

Supply and fixing of Bed bolts

Polycarbonate roofing

Providing and laying of cinder materials

Filler

Suppliying & fixing outlet Arrangements

Supply and delivery of HDPE Pipes - PE 100 as per IS 4984/2016 PN8 including cost and conveyance to site and all other incidental charges therefore etc complete

Lowering HDPE pipes and specials to trench and laying to proper grade and alignment and as directed by the TWAD Officers

Supply and delivery of HDPE Pipes - PE 100 as per IS 4984/2016 PN10 including cost and conveyance to site and all other incidental charges therefore etc complete from stabilization reactor to sludge drying bed

50mm dia

63mm dia

Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers etc., complete

Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One Cement add three sand) 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete

Paving the floor with Vetrified Marbonite tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3(one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Engineer before use on work

Paving the floor with design Antiskid ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement

A) Fabricating, supplying and fixing in positon of SOLID PVC DOORS with frames of different sizes as per the specifications given below: PVC door frames made out of best quality PVC extruded section of 40mm * 58 mm * 2.50 mm +/- 0.3 mm thick, having multichamber cross section and duly reinforced with steel to be mitre cut at the corners and welded including providing tie rod at the bottom and necessary weather seal etc., and PVC door shutters made out of extruded plastic section of 60 mm * 24 mm size in the configruation of an "A" section for shutter frames and multi-chamber hollow plastic section of 200 mm *200 mm*1 mm (average thickness) with tongue and groove section for panels etc., with necessary holdfasts, rubber beedings, furniture fittings, locking arrangements etc., complete including dimantling the masnery, making chippings, holes in the RCC column, beam etc., wherever necessary with power drill to the extent required and redoing the same to the original condition after fixing etc., complete as per specifications and as directed by the departmental officers.

Supplying and fixing Galvalium Sheet 0.47mm roof using necessary trusses, purlins and ''U" or "J" bolts, nuts, screws, nails and bitumen washers including cost of labour and materials etc., complete complyingg with standard specification as directed by the departmental officers.

White washing two coats with freshly burnt shell lime white in colour in all floors including cost of lime and other materials brushes scaffolding charges etc.complete complying with standard specification and as directed

Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification

Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors including cost, conveyance of all materials, labour charges therefore etc complete

Wiring with 2X 1.5 sqmm (22/0.3) PVC insulated unsheathed SC.Cu.conductor of 1100v grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A F.T switch inflush with wall, covered with hylum sheet of 3mm thick with painting of suitable colour for open PVC light point etc complete

Supply and delivery of HDPE Pipes - PE 100 as per IS 4984/2016 PN10 including cost and conveyance to site and all other incidental charges therefore etc complete

Supply and fixing of 40 W tube light fittings with copper choke and all other accessories etc., complete complying with standard specification.

Supply and run of 2 of 4 Sq mm (56/03) PVC insulated SC unsheathed all conductor of 1100 V on 7/20 GI Bearer Wire for Service connection Mains.

Supplying and fixing of 16 Amps DB Switch with metel clad of 500 V with fuse and neutral ( Side handle) on Suitable TW Box PWD Earthing.

Supply and fixing of 1200m A.C. ceiling fan with regulator and all other accessories etc., complete complying with standard specification.

Geophysical survey charges

Drilling of 150 mm dia bore wells in hard rock areas anywhere in Tamil nadu including Transportion to the worksite in hard rock areas and developing the bore wells all labour Charges and all Tools are plants

Supply and delivery 2 HP Submercible motor 50 lpm x 100m head with Single Phase As Per IS 8034/2002 With out Panel Board all Accessories including all charge etc complete.

Supply and delivery 2 HP three Phase Panel Board with Two level Guard and Auto start and all Accessories including all charge etc complete.

Supply and delivery Pvc insulated and sheathed 3 core flat type 4 sq.mm copper cable conforming to IS 694/1990

Supply and Delivery of 50 mm UPVC Column Pipe including cost and conveyance with loading andunloading charges etc.,complete.,

Supply of the following Water Supply Materials

1)2" G.I Union

2) 2"G.I Elbow

3) 2" G.I Bend

4) 2" G.M Gate Valve

5) 2" G.M N R V

6) 160mm end cap

7)2" M.S.Clamp set

Supply and Delivery of 63 mm PVC 6 kg /cm2 Pipe including cost and conveyance with loading andunloading charges etc.,complete.,

Supply and delivery and fixing of HDPE tank 2000 ltr Capacity as per IS 12701 / 1996 including loading,unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc.,

Supply and delivery of MS Kiosk of size 0.75mx0.45mx0.75m made up MS angle of size 50mmx50mmx4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plate of size 25mmx3mm including cutting, welding, grinding , locking arrange

Supply and run of 4x6 sqmm pvc insulated sc unsheathedn cu.conductor of 1100V grade on 7/20 GI bear wire for service connection mains SD 68

Supply and run of 4x6 sqmm pvc insulated sc unsheathedn cu.conductor of 1100V grade 25mm GI Pipe suitable bent at both ends with necessary angle on upright and end support for mains

Earth work excavation and depositing on bank with initial lead of 10 meters and initial lift of 2 meters in hard stiff block cotton hard red earth murrains, gravel, stony earth mixed with small size boulders and hard gravel soil etc., complete as per standard specification (ss 20B)

Cement Concrete 1:4:8 mix (One Cement and Four Sand and Eight aggregate) including cost and using 40mm metal including Cost and Conveyance of all materials to site and all labour charges etc., complete complying with standard specification.

Brick Work in Cement Mortor 1:5 Mix (one cement, five sand) using new best II Class Bricks of size 9 ” x 4 3/8 “x 2 3/4 ” from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications

Lowering PVC rigid pipes and specials to trench and laying to proper gradient and alignment jointing with PVC couplers with cement paste and testing to the required pressure including conveyance of water for filling during testing etc., complete complying with standard specification.

Refilling with excavated excess earth work including all labour charges etc., complete complying with standard specification.

Plastering with C:M 1:5 mix using 12 mm thick including cost and conveyance of all materials to site and all labour charges etc., Complete complying with standard specification.

Labour Charges for the Erection of submersible pumpset in borewell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TNICN switches starter, voltmeter,Ammeter, three pilot lamps capacitor single phasing preventor, water level guard and laying and jionting the cables and twin earthing as per IE rules., complete and testing the pumpset and trail run for 10 days.

Exterior Emulsion paint Two coats with good quality of approved Emulsion paint including cost of all materials to site and all labour charges for mixing applying and proper curring etc., Complete as per Standard Specifications

Exterior Emulsion paint Two coats with good quality of approved Emulsion paint including cost of all materials to site and all labour charges for mixing applying and proper curring etc., Complete as per Standard Specifications

SREE BALAJEE CONSTRUCTION (BID ID -1224284)