Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.0 LAccepted-AOC | L1 | Accepted-AOC ACCEPTED | |
| 2 | L2₹26.6 L+₹1.5 L (6.14%)Rejected-AOC 301 CHAMUNDA ENCLAVE PLOT NO 89 AIROLI SECTOR 8A NAVI MUMBAI 400 708 | THANE | MAHARASHTRA | 400708 | L2 | Rejected-AOC REJECTED | |
| 3 | L3₹29.0 L+₹3.9 L (15.7%)Rejected-AOC UNIT NO 7 MOUNT VIEW CO OP HOUSING SOCIETY LIMITED MUMBAI MANKHURD 400 088 | MUMBAI SUBURBAN | MAHARASHTRA | 400088 | L3 | Rejected-AOC REJECTED | |
| 4 | L4₹29.9 L+₹4.9 L (19.4%)Rejected-AOC B 12 VISHAKARMA JYOTI SUBHASH LANE MALAD E MUMBAI 400097 | MUMBAI SUBURBAN | MAHARASHTRA | 400097 | L4 | Rejected-AOC REJECTED | |
| 5 | L5₹31.9 L+₹6.8 L (27.3%)Rejected-AOC 38 30 92 SAI NAGAR MARRIPALEM VISAKHAPATNAM 530 018 | VISAKHAPATANAM | ANDHRA PRADESH | 530018 | L5 | Rejected-AOC REJECTED |
Tender Value
₹43 L
EMD Value
₹86,000
Closing Date
9 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(NW) BHANDUP
GE NW BHANDUP
ADDITION/ ALTERATION AND IMPROVEMENT TO CUPBOARD, KITCHEN AND WINDOWS OF CERTAIN DUS OF SABARMATI BLDG AT MO (MB) GHATKOPAR UNDER GE (NW) BHANDUP
2023_MES_580071_1
8253/B
Open Tender
Civil Works
Item Rate
180 days
GHATKOPAR
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE(NW) BHANDUP
₹86,000
Yes
17 Jun 2023
9 Feb 2023
10 Mar 2023
9 Feb 2023
9 Mar 2023
23 Feb 2023
Amount
Demolition of cement concrete ( reinforced) as in roofs, shelves, chajjas, floors ( other than ground floors), beams, staircase, landing, chajjas , parapet, water tank and similar suspended work etc. and removal of rubbish/ demolished materials out of MD land complete all as specified and directed
Demolition of brick work or stone boulder masonry,built in cement mortar or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work and precast concrete articles and removal of rubbish/ demolished materials out of MD land complete all as specified and directed.
M&L for PCC 1:2:4 type B1 (using 20mm graded aggregate) as in bed for fixing kitchen cupboard platform fixing complete all as specified and directed
Taking down chowkat or frame with shutter (without taking off shutter from the frames) and including grills/ guard bars not exceeding 1.5 Sqm each complete all as specified and directed
Taking down chowkat or frame with shutter (without taking off shutter from the frames) exceeding 1.5 Sqm but not exceeding 4.0 Sqm each complete all as specified and directed
S&F aluminium section in doors/windows/ventilators ,kitchen cupboards, built n almirah doors any type, powder coated in approved colour (Thickness of powder coating not less than 50 micron), aluminium section (medium weight of series 'B') or section as directed by Engineer-in-Charge, cut to size, jointed together with cadmium plated steel screws including rubber beading or gasket for aluminium sections for fixing glass/XPM jali or for fixing bakelite sheet and all necessary fittings complete, screws, plugs for fixing screws, etc all as specified and directed (Make : JINDAL/HINDALCO) Notes : (i) Weight of aluminium sections shall only be measured. (ii) The supply only rate of bakelite sheet glass pane,wire mesh will be measured separately.
S&F only 4mm thick figured glass/pin headed type ordinary quality fixed in aluminium ventilator n exc 0.50 Sqm each pane complete all as specified and directed
Supply only stainless steel wire cloth of 0.63 mm nominal dia of wire and average width of aperture 1.40 mm , fixed in aluminium windows complete all as specified and directed.
S&F aluminum anodised grill DG- 202 ( 10 mm x 7.5mm ) of Deco grill or equivalent fixed with 'F' section size not less than 20.60 x 15.20 x 1.5mm thick of approved make all as specified and directed. Note : (i) Make shall be of M/s Decogrille of M/s Associated Groups or equivalent as approved by the GE. (ii) Minimum thickness of anodizing shall be 15 microns.
Supply and fix for 6mm thick bakelite sheet prelaminated both side with decorative choice laminations with aluminium frame cuboard shutter work complete all as specified and directed
M & L for fixing in repairs for pre laminated particle board 18/19mm thick interior grade prelaminated one side with decorative choice lamination fixed with screws to timber frame work complete all as specified and directed
S&F machine cut and machine polished, green marble, 18-20mm thick on horizontal or vertical surface,as in cooking platform, window cills and jambs bedded, jointed and pointed with neat grey cement slurry and pointed with coloured or white cement with pigment to match over and including rendering coat of 10 mm thick in CM 1:4 complete all as specified and directed
S&F 100 mm stainless steel butt hinges,complete all as specified and directed
M&L for cleanning the surfaces with water and wire brush to remove dirt, dust, and other bio organism and repair the broken area with cement sand mortar and open major cracks with cement + thermacool WP 51 to make putty to fill the cracks.Once the surface is dry apply a liberal absorption coat of temacool WP 51 as follows, 1 Ltr thermacool WP 51 + 2 Ltr water mix well and apply by brush liberally . After the absorption coat dries apply first coat one Ltr Thermacool WP 51 + 250 ml of cement + 250 ml of water and floor joinery . Then apply on the entire area while recoating the joinery. Once the water proofing layer is dry, apply first coat of Thermacool 0.3 c followed by second coat of 0.3c upon drying on projected cupboard area. (Note:- equivalent products of Dr. fixit /BASF/Asian paints with their guidelines for application )
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises etc out side MD land complete all as specified and directed.
Dismantling stone slabs and tiles of any description or thickness in kitchen platform and similar work laid, bedded and pointed in cement mortar and removal of rubbish/ demolished materials out of MD land complete all as specified and directed
M&L for glazed ceramic coloured tiles 450x300mmx7mm thick in vertical surfaces such as skirting/dado and risers to steps and including over 10mm thick rendering in CM 1:3 on fair faces of brick/concrete surfaces as in backing coat for tiles. etc, complete all as specified and directed
M&L for Non-skid ceramic tiles (Coloured) 7 to 8mm thick rectangular area of each tiles exc 0.06 sqm n exc 0.11 sqm in floors etc,.set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4 laying floor finished complete all as specified and directed Notes: while fixing tiles, joint width between two tiles shall be maintained using tile spacers and filling the tile joints with three component epoxy resin based tile joint filler like Roff RTM epoxy of M/S Pidilite Industries Ltd or equivalent complete as per manufacturers instructions.
M&L 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs pillars, window cills cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigments to match with shade or granite complete all as specified and directed
M&L for rounding to edges of stone slab one edge , such as in steps , cooking paltforms , and similar situations complete all as specified and directed
M&L for 18mm thick multiwood modular kitchen cabinets, (box type) inside depth not less than 0.5m, water proof, termite & borer proof, corrosion free with melamine polished shutter and auto closer counter sunk stainless steel hinges, stainless steel handle and fixing of baskets complete all as specified. (Note:(i)only front facing area of cabinet will be measured for payment (ii) stainless steel baskets mentioned as supply only under Sl.Item No.23 of this AE shall be fixed under this item as the unit rate quoted against this item is inclusive of this fixing provision) all as specified and as directed
Supply only a set of SS baskets with fittings as in modular kitchen cabinet as per following details:- Plate basket 21'' x 19'' x8'' -1 No (ii) Plane basket 21'' x 19'' x 8''-1 No (iii) Plane basket 17'' x 19'' x 8''-1 No (iv) Butlery basket 17'' x 19'' x 4- 1 No (v) Cup & Saucer basket 17'' x 19'' x 4'' -1 No (vi) Single pull out 8''-1 No (vii) GT-PT & Drip tray 22"-01 No (viii) stainless steel telescopic channels of appropriate size as required to fix the baskets in cabinet. (Make first quality of Sleek/ Ebco/Dolin) all as specified and as directed.
M&L for 18mm thick multiwood modular kitchen cabinets, (box type) inside depth upto 0.45m, water proof, termite & borer proof, corrosion free with melamine polished shutter and auto closer counter sunk stainless steel hinges, stainless steel handles and inside partition complete all as specified. (Note:(i)only front facing area of cabinet will be measured for payment
S&F for 20mm bore sink cock swan neck (wall mountinstallation) type with chrome finish complete all as spd and directed.
S&F stainless steel glossy finish single bowl kitchen sink of size 24x 18x 9 inch with SS kitchen sink coupling and waste pipe all as spd and directed.
Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 15mm complete all as specified and directed.
S&F CPVC pipe 15 mm bore SDR 11and plain CPVC SDR 11 fittings fixed complete to walls, ceilings or in floors etc, complete all as specified and directed.
Chipping, removing carefully loose/damaged concrete including plastering (total thickness exceeding 40mm but not exceeding 60mm ) from surfaces of RCC members, in any location by low impact Hammer/Breakar without damaging the structure & cleaning the surfaces with wire brush etc and disposal of debris out side MOD land complete all as specified and directed. Note : 1) Hard concrete shall not be removed by force
M&L for cleaning existing reinforcement with wire/ rotary wire brush to a shining bright finish, making the surfaces free from loose material, dirt etc complete and applying two coats of alkaline rust converting primer conforming to ASTM-B-117 of make. "Feovert" of "Krishna Conchem" OR "Roff Rust Cleaner' of 'Pidilite' OR 'Shali Rustoff' of 'STP Ltd', on rebars with time interval of 1 hour between the coats, complete all as specified and directed. (Note :- Mode of measurement: superficial area of concrete will be measured.)
M&L for carry out application of ‘Bi-polar migratory corrosion inhibitor' [Make : M/s. Krishna Conchem (EPCO KP-100) / BASF (MasterProtect®8000Cl)] on RCC surfaces, complete all as specified and directed. (Note :- Mode of measurement: superficial area of concrete will be measured.)
M&L for Anticorrosive Treatment to Reinforcement using IPNET-RB of M/s Krishna Conchem or Epoxy Zinc Primer of M/s. Dr. Fixit by application on exposed reinforcement in two coats with time interval of minimum 4 hours between each coat. The application shall be done by brush after cleaning/wire brushing to the exposed steel surfaces complete all as specified and directed . Note :- Mode of measurement: superficial area of concrete will be measured.
M&L for Epoxy bond coat of Make Fosroc (NITOBOND-EP) OR EPOXY BONDING AGENT of Dr. Fixit OR equivalent of M/s. Krishna Conchem as approved by GE over exposed concrete surfaces prior to application of any type of mortar / concrete to ensure bond between old concrete & new concrete/ new mortar by brush application, complete all as specified and directed.
M&L for providing Polymer Bonding Agent of Make M/s. Krishna Conchem (MONOBOND) OR Fosroc (NITOBOND-SBR) OR equivalent brand of Dr. Fixit,as approved by the GE followed by flexible polymer based putty ( 1cement: 1.2 finesand :20% polymer by weight of cement : water as required ) on cracks after cutting the cracks to a 'V' shaped groove upto 10 mm wide and 10 mm deep in structural RCC members , finished with spatula etc. complete all as specified and directed.
M&L for casting & repairing of excessively damaged distressedRCC members (exceeding 40mm in thikness) with prebatched, prepacked, single component ready to use microconcrete from Fosroc (Renderoc RG) or equivalent of Dr. Fixit as approved by GE, at any level/ height and at any lead or lift as directed including prefabricated water tight formwork, centering, scaffolding, also including mixing , laying, levelling, finishing, curing etc as per manufacturer's specifications and all other relevant works, complete all as specified and directed. (Note : Reinforcement only shall be measured and paid separately).
M&L for building up the profile of structural members using polymer modified mortar from M/s. Krishna Conchem (Molith PMM) OR Polymer mortar HB of Dr Fixit, while the bonding agent is still tacking upto 20mm thickness, including levelling, profiling etc, complete all as specified and directed.
M&L for building up the profile of structural members using polymer modified mortar from M/s Krishna Conchem (Molith PMM) OR Polymer mortar HB of Dr. Fixit, exceeding 20mm thick and not exceeding 40mm thick in two layers, each of equal thickness including levelling, profilling etc, complete all as specified and directed.
M & L for TMT steel bars 10 mm dia and over, cut to n length , bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or escuring with clips quality confirming to complete all as specified and directed
All as per item above but upto 5 mm dia in stirrups , spaces and binders all as specified
M&L for brick work with sub-class 'B' bricks, straight, or curved on plan to any radius as in half brick thick wall in CM 1:4 complete all as specified and directed.
Taking down cement plaster of any description on walls including raking out joints, hacking for key scrubbing down with water etc. complete all as specified and directed
M & L for rendering 10 mm thick in CM 1:6 on brick walls or concrete surfaces and finishing the surfaces even and smooth complete all as specified and directed.
M&L for 20mm thick (12mm + 8mm) in two coats polymer modified ready mix cement based plaster on the wall surface including finishing the surfaces of top layer in the proportion as per manufacturer recommendation, for the under mentioned storeys of the existing buildings, complete all as specified and directed, Make : Easy plast form M/s wall plast or chemplast or readiplast from ultratech, Note : The thickness of plaster specified above is the minimum thickness and the quoted rates shall also be demand to included for provision of dubbing of the surfaces with the ready mix plaster and no extra payment shall be admissible on the account”. complete all as specified and directed
M & L for preparation of new plastered surfaces of walls and applying Two coat of oil bound distemper including application of wall care putty for smooth finish.etc with roller over one coat of alkali resistant primer complete all as specified and directed.
M&L for preparation of old decorated surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and thereafter applying with roller Two coat of oil bound distemper including application of white cement based wall care putty finish for smooth finish.etc complete all as specified and directed.
M&L for two coats of antifungal paint (Apex ultima Protek of Asian Paints or equivalent in approved makes) over a coat of exterior primer (Professional pack of Asian Paint) on newly prepared plastered external surfaces of wall and ceiling and including scaffoldings and cradle including hoisting and lowering as required with bracing, support complete all as specified and directed
Taking down carefully unserviceable point wiring of any type & pattern (Light/Fan/Socket or power) including unserviceable fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings of any type etc and making good disturbed surfaces of walls/ roof etc complete all as specified and directed
M & L for point wiring complete with proper colour coding using, 1100 Volts grade, 1.5 Sqmm, PVC insulated FRLS, unsheathed wire with multi stranded copper conductor confirming to IS-694, Part II, ISI marked drawn in and including PVC conduit (minimum 20mm dia) concealed in wall etc (also including cutting chiseling in wall and making good the same in CM 1:3 to match with the adjoining surfaces) with all accessories, fittings, PVC junction boxes etc, also including 1.5 Sqmm, PVC insulated, FRLS, unsheathed, 1100 Volts multistranded copper conductor green colour as continuous earth wire connected to common earth dolly all as specified and directed for one light point /fan/bell point controlled by one one way switch, complete all as specified and directed. Note: Modular flush box and inner/outer plates measured and paid separately.
All as per item above but for One 2pin/3 pin socket outlet 5 Amps on independent board.
All as per item above but for One 2pin/3 pin socket outlet 5 Amps on same board with other switches , complete all as specified and directed.
M&L for point wiring with 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLSH with and in and including PVC concealed conduit having thickness not less than 2 mm with all fittings including 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLSH as earth continuity conductor connected to common earth dolly.and including cutting chiseling for concealed piping and making good disturbed surface area and white wash/colour wash to matching existing colour and all as specified . Note: colour coding is to be maintained .(Ph-Red, N-Black, Half-Yellow, Earth- Green)(Make of copper wire:Legrand/Polycab/Havells and PVC conduit Make: Precision,Plaza) Note: Modular flush box and inner/outer plates measured and paid separately.
M&L for ceiling rose three terminals AC 240 volts 50Hz complete all as specified
M&L for switch modular one way 6/5 amps 1 module complete all as specified.
M&L for switch modular one way 16/20 amps 1 module complete all as specified.
M&L for socket modular 6Amp 2/3 pin combined 2 module complete all as specified and directed.
M&L for socket modular 16/20 Amp 2/3 pin combined 2 module complete all as specified and directed.
Supply and fixing modular metal flush box 3 module complete all as specified and directed.
Supply and fixing modular metal flush box 6 module complete all as specified and directed.
Supply and fixing modular white cover plate with frame 3 module complete all as specified and directed.
Supply and fixing modular white cover plate with frame 6 module complete all as specified and directed.
Material and Labour for tube light fitting LED 20 watt with decorative end caps made out of CRCA sheet powder coated complete with housing with aluminium heat sink on back of leds ,power factor >0.9,having inbuilt surge protection device for overvoltage protection with all accessories prewired and making connection with 3 core copper flexible cable of size 23/.0076 from ceiling rose/PVC connector to light fitting and shall be fitted on new plastic square/round block complete all as per specified and directed.
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 225 mm sweep 1350 rpm with, blades, and frame and louvers and dismantling of old unsv exhaust fans and depositing the same to MES office complete all as specified and directed.
Deduct Credit for Demolished/ Dismantled material Rs. (-) 56610.00 (Minus) as listed in Schedule of Credit Note1: Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum' Note 2:- The tenderer must keep in mind when quoting rates against items out in multiple store house having height 4 mts to 7 mts. Necessary scaffolding and saftey measures required during execution of work are including in this items.
S K ENTERPRISES
Joy builders
Vishal Builders
Anjali Constructions
DWARKESH STRUCT-CON
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .