Provn of toilet block for staff near mess office at Offrs mess of AMC C AND C AND Provn of Geyser 25 Ltrs Capacity and connected works in JCOs ORs Md accn at BS Marg UNDER GE EAST LUCKNOW

Amount

Excavating in trenches n exc 1.5 m wide and n exc 1.5 m in depth for foundation & for laying of pipes/cables etc getting out and bottom surface to required gradient etc and getting out in soft/loose soil complete all as specified and directed.

Surface dressing n exc 15 cm deep in soft/loose soil complete all as specified and directed.

M&L for hard core broken bricks of gauge n. exc. 63mm, deposited, spread and levelled in layers n. exc. 15cm thick, water and rammed to a true surface complete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundations filling, sub base and mass concrete filling, etc complete all as specified and directed

M& L for sand filling under floor spreading and levelling in layers n exc 25 cm thick for well ramming watering required foundation ,mass filling etc. and for under ground cable complete all as specified & directed. Note- For cable 18 cm punned down thick shall be considerd for mesurement only)

M&L for brick work with fly ash bricks, straight or curved on plan exc 6M mean radius, old size brick built in cement mortar 1:6 complete all as specified and as directed.

M&L for brick work with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work in CM1:4 finished even and smooth without using extra cement complete all as specified and directed

M&L for rendering 15mm thick on other than fair faces of brick work in CM1:6,finished even and smooth without using extra cement complete all as specified and directed

M&L for rendering 10 mm thick in cm 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L 5mm thick rendering in cement mortar in CM (1:3) on ceiling finished even and smooth without using extra cement, complete all as specified and directed.

M&L for RCC 1:1½ :3 type A1(using 20 mm graded stone aggregate) as in foundations, footings, plinth beams; bases for columns, etc complete all as specified and directed

M&L for RCC 1:1½ :3 type A1(using 20 mm graded stone aggregate) as in Column, pillars, piers, posts and struts etc complete all as specified and directed

M&L for RCC type B-1 (1:2:4) using 20 mm graded stone aggregate on beams, cantilevers, lintel over 1.5 m Span complete all as specified and directed.

M&L RCC type B-1 (1:2:4) using 20mm graded aggregate in slab supported on wall walls beams and columns in floors roof landings complete all as specified and directed.

M&L for 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base of floor complete all as specified and as directed.

M&L for TMT bars 10 mm dia and over for reinforcement cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, and binding with and incl MS wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-415 or Fe-500 complete all as specified and directed.

M&L TMT bars of 6 to 8mm dia and over cut to lenth, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia.complete all as specified and directed.

Ditto as per item 18 above but 5 mm dia and over up to and including 10 mm dia in stirrups, spacers and binders etc complete all as specified and directed.

M&L for formwork to sides of concrete in foundations, footings, bases of columns, sides and soffits (if any) plinth beams, and similar work complete all as specified and directed

M&L for formwork to sides of concrete of pillars, posts, struts, piers, columns etc complete all as specified and directed

M&L for form work for flat fair finished surfaces of concrete to soffits of suspended slabs such as roof slab not exceeding 200mm thick complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 Sqm but not exc 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedding in cement mortar 1:6 complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surface 350x250x7mm / 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thic screed plaster in cement mortar 1:4 complete all as specified and directed.

M&L for 16 to 18mm thick granite ( of any type ) work (table rubbed and polished ) in steps, jambs, pillars, window -cills, cooking platforms, partition of urinal and like pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding of edge laid over 15mm thick screed bed in CM (1:4) including rounding of edge of stone slabs one edge complete all as specified and directed.

M&L for rolled mild steel work as in door frame (chowkhats ) including provn of 10mm dia deformed bar welded horizontally to bottom of frame conforming to Fe-290 (Gde 165-E) including preparing back of chowkhat and applying two coats tar and sanding newly tarred surfaces with clean sharp sand complete all as specified and directed.

S&F solid PVC moulded door frame of size 50mm x 47mm made out of 5mm prelam coloured PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with prelam sheet as reinforced with MS square tube and fixing in opening as specification & drawing complete all as specified and directed.

S&F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick, (styles) with 2,4 or 6 raised panel design with 2mm thick moulded prelam (Nut Brown colour ) PVC sheet on the front face & 2mm prelam (Nut Brown colur ) PVC sheet on back face, and fixing inthe frame at site as per specification and drawing on page 161 of SSR (Part -II ) 2010 complete all as specified and directed.

S&F steel window / ventilator glazed and gauged (combination) with side hung / top hung shutters incl box type / projecting type hinges, and steel peg stay, handle & locking arrangement and frame made out of 1.25mm thick pressed steel frame including guard bars and necessary cooler arrangement in window complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of apertature 1.40mm and fixed with tinned tacks or stainless steel wire staples complete all as specified and directed.

S&F 3mm thick figured glass, pin head type and glazing with oil putty in square n. exc 0.50 Sqm in each pane, complete all as specified and directed.

S&F 100mm butt hinges stainless steel with galvanised mild steel hinge pin anodised ISI marked and fixed, complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 15mm GI water tubing ( Concealed type), medium grade, galvanised with all fittings and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed.

S&F 20mm GI water tubing, medium grade, galvanised with all fittings ( and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed.

S&F 1000 Ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed

S&F ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe of 20mm dia and fixed (minimum weight 210 gms) complete all as specified and directed.

S&F tubular towel rail, chromium plated brass 20mm dia 'D" type 60cm long between flanges complete all as specified and directed.

S&F PVC valve less, syphonic action type flushing cistern, 10 Litre capacity, low level, white with inlet, ball vlave float, handle including PVC rigid pipe 32mm bore as flush pipe fixed on walls by drilling holes and using PVC rawl plug of suitable size complete all as specified and directed.

S&F wash hand basins vitreous china, coloured flat back size 550 x 400mm fixed including bracket complete all as specified and directed.

S&F CP grating doom 100 mm dia chromium plated complete all as specified and directed.

S&F, glass corner self assembly, fancy type, made of 6 to 7mm thick toughened glass of size 250x250mm, fixed with CP brackets, complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in copings, bed plates, plinth courses, parapets and the like including weathering, slightly rounded or chamfered angles and throating including use and waste of necessary form work etc complete all as specified and directed.

Supply and fixing 15mm bore brass CP mixer valve wash basin for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F 15mm bore cast copper alloy chromium plated bib tap with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and directed.

S&F angle valves 15mm bore , cast copper alloy chromium plated with long sunk and cap (Concealed type), screwed down high pressure screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed.

S&F PVC connection, heavy duty 15mm bore, 45cm long with 2 Nos PTMT nuts of approved quality complete all as specified and directed.

S&F vitreous china wash down water closet pan pedestal pattern, including P or S trap and connection to drain (or outgoing pipe) and pvc seat cover excluding flushing cistern and flush pipe complete all as specified and directed

S&F plastic water closet seat cover white, closed pattern with flat bottmom & cover and aluminum anodised hinging device complete all as specified and directed.

S&F cast copper alloy health faucet chromium plated with 1.00 Mtr long flexible tube incl wall hook complete all as specified and directed

S&F CP brass jet spray with hand hold arrangement including 1.5 m long flexible pipe with hook of superior quality complete all as specified and directed

S&F 110mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall or laid in floors / trenches with & including existing / new PVC clamps complete all as specified and directed.

S&F 75mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall or laid in floors / trenches with & including existing / new PVC clamps complete all as specified and directed.

S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal with access door with cement joint complete all as specified and directed.

S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal with access door with cement joint complete all as specified and directed.

S&F 110mm bore PVC (SWR) bend / shoe of any radius with access door, complete all as specified and directed.

S&F 75mm bore PVC (SWR) bend / shoe of any radius with access door, complete all as specified and directed.

S&F PVC (SWR) floor trap 75mm, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F PVC (SWR) reducers 75/110mm bore complete all as specified and directed.

M&L for PCC 1:3:6 type C2 using 40mm graded aggregate for bed concrete to drain pipe packing under hunching for sides for 150mm dia SWG pipe lines completed all as specified and directed.

M&L for SWG drain pipe grade ‘A’ 150mm dia laid in trenches incl jointing in CM 1:3 complete all as specified and directed.

S&F Vitreous China urinals, half stall type (flat back), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including spreader, 60mm long brass screws, pointing around urinal back in cement; fixing with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed

S&F, 32 mm bore Low density PVC flexible pipe for Wash hand basin/sink etc complete all as specified and directed.

M&L for brushing neat cement slurry with 3.0 Kg./Sqm over roof slab complete all as specified and directed

M&L for PCC 1:2:4, type B1 using 20 mm graded stone aggregate as in roof padding/ roof kerbs / benching / coved fillets etc rounded or chamfered on edges complete all as specified and directed.

M&L for roof/sunkn treatment with polymeric water proofing mem breane with certain specification given below as under complete all as specified & directed (a) M&L plastering 10mm in CM 1:4 using 100% course sand on roof including WPC @ 3% by weight of cement. (b) Applying a coat of bitumenous primer @ 0.50 LTRs /Sqm and allow to dry (c) Applying a coat of hot blown bitumen grade 85/25 @ 1.20 Kg/Sqm. (d) Supply and laying APP based polymeric water proofing membrane, weight not less than 3.00 kg/sqm and and minimum 3 mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) sealed the side laps with spread temper (e) applying a tack coat of hot blown bitumen grade 85/25 @ 1.20 Kg/Sqm. (Note : WPC measured and paid separately).

Returning filling in including spreading levelling watering and well ramming in layer not exc. 25 thick complete all as specified and directed.

Removing excavated materials n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed.

M&L for preparation of new or previously untreated wood and wood based surfaces of any description not otherwise descriped over 10cm width girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new steel and iron surfaces of any description over 10CM width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L preparation of newly plastered wall surfces and applying three coats of white wash complete all as specified and directed.

M&L for applying two coats of weather proof acrylic emulsion paint over a coat of 1mm thcik wall care putty & including a coat of emulsion wall primer all as per manufacture's instructions & complete all as specified and directed. by Engr-in-Charge.

M&L for preparation newly plastered ceiling surfaces and applying three coat of white wash complete all as specified and directed.

M&L for 75mm thick cement concrete type 1:4:8 D-2 (40mm graded stone aggregate ) as in floors / pavings complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment coloured, reflective type of approved quality laid over and including 25mm thick sand cushioning vibrated with mechanical vibrator complete all as specified and directed.

Supply only liquid water proofing compound of approved quality and make confirming to IS complete all as specified and directed.

Material and labour for one light / fan point controlled by one, one way switch 06 Amp wiring with 1.5 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sq mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of sunk zinc coated pressed steel terminal box of 1.60 mm thick with 3 mm thick plastic laminated sheet top cover, brass screws, cup washers etc and making good to the disturbed surfaces to match the existing complete all as specified and directed.

All as per serial item No 80 here-in-before but one 3 pin, 06 Amp socket outlet point on independent board controlled by one, one way switch 06 Amp.

All as per serial item No 80 here-in-before but one 3 pin, 06 Amp socket outlet point on same board controlled by one, one way switch 06 Amp.

All as per Serial Item No 80 here-in-before but point wiring with 2.5 Sq mm single core FRLS cables and earth continuity wire of 2.5 Sq mm single core FRLS cable for one 3 pin 16 Amp socket out let point controlled by one, one way switch on independent board complete all as specified and directed.

Supply and fix switch piano flush type, 06 Amp, single pole, one way, 230 Volt complete all as specified & directed.

Supply and fix socket outlet 2 in 1, 5 pin, 06 Amp, flush type, 230 volt complete all as specified & directed.

Supply and fix switch socket combination outlet 2 in 1, 3 pin, 06 Amp and 16 Amp flush type, universal, 230 volt, four hole complete all as specified & directed.

Supply and fix LED tube light fittings 1200 mm,20 W higher energy saving decorative ultra slim square profile LED lighting fixture with extruded aluminum housing enviromental friendly, energy efficient complete all as specified and directed.

Supply and fix of LED security light fitting 35 watt, 5700K with IP 66 protection comprises of a pressure die cast aluminium housing, heat resistance toughened glass, LED lenses, surge protector, electronic driver, etc and all accessories pre-wired including connecting up with PVC insulated copper conductor cable 1.5 Sq mm, 3 core as required for connections and 32 mm bore light grade G. I. tube mounting bracket of 1.5 metre in length, bend to shape at 140 degree in ‘L’ shape and fixed to wall by means of 02 nos. of 40 x 5 mm flat iron clamps, nuts, bolts and washers etc complete all as specified and directed.

Supply and fix ceiling rose, 6 Amp, 250 volt, AC, ISI marked with three equal size terminals and PVC / Polycarbonate insulated body of 50 x 25 mm size complete all as specified & directed.

S&F of exhaust fan single phase, 230/240 Volt heavy duty of size 300 mm sweep 1400 RPM including suitable louvers and making connection with twisted copper flexible wire 23/0.076mm all as specified and directed.

Supply and fix SPN MCB DB 8 ways with 200 Amps rated bus bar 240Volt, Double door type all as specified

Supply and fixing MCB SPN 32 Amps 240 V, C- curve, 50 Hz, breking capacity-10 kA. complete all as specified and directed.

Supply and fixing MCB SP 6-32 Amps240 V, C- curve, 50 Hz, breking capacity-10 kA . complete all as specified and directed

Supply, laying and testing cable XLPE insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 sqmm 4.0 core complete all as specified and directed.

M&L for Old size sub class 'B' bricks,laid flat in trenches over the cable with length of brick perpendicular to the direction of the cable , adjacent/abutting each other complete all as specified and directed.

M&L for 25 mm dia GI tubing medium grade with all fittings complete to walls and ceilings (or) laid in floors complete all as specified and as directed..

M &L for 20 mm dia GI tubing medium grade with all fittings complete to walls and ceilings (or) laid in floors complete all as specified and as directed..

S & F Gun metal gate valve with iron wheel hand ,screwed both ends,complete for size 25 mm bore including connecting materials complete all as specified and as directed.

S & F Gun metal gate valve with iron wheel hand ,screwed both ends,complete for size 20 mm bore including connecting materials complete all as specified and as directed.

M & L for cutting GI Pipes and reducing to required length of dia 40 mm bore and inserting Tee 25x 25x 20 mm GI pipe incl nessasary excavation complete all as specified and directed.

M & L for earth work construction of valve chamber with inner clear dimension 600 x 600 x 600 mm suitable for 50mm Gate Valves with PCC (1:4:8) 150mm thick type D2 for foundation, Brick masonary 230mm wall in CM (1:4), PCC (1:2:4) 75mm type B1 for coping, rendering in CM (1:4) 15mm thick including provisiion of 3 mm thick MS sheet cover and 25 x 25 x 3mm angle frame embeded in coping with two coats of synthetic enamel paint over a coat of red oxide primer with locking arrangements including necessary earth work complete all as specified and directed .

Supply and fixing of stationery storage type electric BEE 5 star rated Hot Water Geyser of capacity 25 Ltr to operate on 230 volt AC, vertical type, white in colour, working pressure min 0.8 Mpa with glass lined coated tank, magnesium anode, adjustable thermostat, enamel coated incology heating element 2 KW, ABS plastic body,Product warranty-2 Years, Heating element warranty-4 Years, Inner Tank warranty-7 Years, including 4 nos full threaded fastner of size 100 x 10 mm with 2 Nos washer, complete all as specified and directed.

S&F plug top 15 Amp, 230 Volt, 50 Hz capacity plug all as specified and directed.

S&F, 600mm long steel connection pipe hot series with both side nut with rubber washer suitable for 25 Ltr geysers all as specified and directed.

Material and labour for sub main wiring with 4.0 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 4.0 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, ISI mark medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing surface complete all as specified & directed.

Supply & Fixing Bib taps 15 mm bore, ISI mark, cast copper alloy , Chromium plated Fancy type handle, screwed down, screwed for iron pipe or for brass ferrule and fixed.complete all as specified and directed.

Supply, laying, jointing & testing galvanised iron tubing medium grade with all fittings such as bends, elbows, tees, sockets, reducers, unions etc as required at site laid in walls through proper clamps complete all as specified and directed for 15 mm bore.

Supply and fix switch piano flush type, 16 Amp, single pole, one way, 230 Volt complete all as specified & directed.

Supply and fix socket outlet 2 in 1, 3 pin, 06 & 16 Amp, flush type, 230 volt complete all as specified & directed.

M & L for cutting GI Pipes and reducing to required length of dia 20/15 mm bore and inserting Tee of suitable size complete all as specified and as directed.

Supply and fix Stop valves, 15 mm bore chrome plated, cast copper alloy, screwed down, high pressure, Fancy type, screwed both ends for iron pipe or for unions and fixed complete as directed.

S&F Gun metal gate valve with iron wheel hand ,screwed both ends,complete for size 15 mm bore including connecting materials complete all as specified and as directed.

M/S S S A ASSOCIATES (BID ID -3058186)

M/S KAUSHIK CONSTRUCTION (BID ID -3061943)

M/s Bhadoria Associates (BID ID -3070719)

HS ASSOCIATES (BID ID -3070930)

M/S Reliance Construction (BID ID -3061707)