REPAIR OF JOINERY, AC/GI SHEET ROOFING, FALSE CEILING AND TILING ETC IN N4, NARENDRA GROUND AND RAMADEVI AT AFS CHAKERI KANPUR

Amount

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet reinforced with MS Square tube, supplying & fixing in opening as per specification complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30mm thick (stiles), consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded laminated PVC C channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of bone single side prelam sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F 100 mm size butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified & directed.

S&F Aluminium, anodised barrel tower bolt of extruded section of 150mm long complete all as specified

S&F Aluminium handles 125 mm size extruded type, anodised complete all as specified & directed.

Demolition of brick work built in Cement Mortar complete all as specified and directed.

M&L for brick work with fly ash brick straight or curved on plan exc 6.0 mtr mean radius built in 1:6 cement mortar using of old size bricks complete all as specified and directed

M&L for brick work (except brick) with sub class'B' brick straight or curved on plan not exc 6.0 mtr mean radius built in CM (1:6) complete all as specified and directed. Note:- Old serviceable brick shall be obtained from item No-06.00 here-in-before.

Taking down cement plaster on brick or concrete surfaces etc complete all as specified and directed.

M&L for 15mm thick plastering on fair faces of brick wall or concrete surfaces in 1:6 cement mortar, finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surface of walls and applying two coat of oil bound distemper including 2mm thick wall care putty over one coat of primer complete all as specified and directed.

M&L preparation of new plaster surfaces of wall and applying three coat of white wash wash complete all as specified and directed.

Easing of door shutters for easy closing / opening, tightening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and directed.

Easing of window shutters, kitchen cupboard shutters, showcase shutter drawers including fixing of screws adjusting handles, knobs tightening piano hinges including misc small adjustments complete all as specified and directed.

S&F in repair 75mm long double legged door stopper of aluminium alloy with rubber complete all as specified and directed.

S&F in repair 100 mm aluminium anodized hasp & staple safety type with mild steel hinge pin including bolt to hinge plate fixed with screws complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified & directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified & directed.

Hacking out old broken glass (any size quality or description) from wooden or steel frames glazed complete all as specified and directed.

S & F 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares of any size complete all as specified and directed.

S & F 3mm thick figured glass pin head type and glazing with oil putty or wooden beads in squares not exc 0.50 Sqm each pane complete all as specified and directed.

S&F in repair curtain rods of chromium plated mild steel conduit pipe 19mm dia with wall thickness 1mm including chromium plated bracket holders for holding of rods and fixed with screws to pelmet boxes/wall complete all as specified and directed.

Dismantling timber scantling 40 Sqcm and over in section in framed work in any position complete all as specified.

M&L scantling in 2nd class H/W clean sawn fixed with nails in timber frame work complete all as specified and directed.

Dismantling of asbestos cement (corrugated or semi corrugated etc) sheet in roof covering complete all as specified and directed.

S&F for 6mm thick asbestos cement sheets corrugated or semi corrugated fixed with 'L' type or 'J'' hook and washers as in roof covering etc. complete all as specified and directed by GE/ Engr-in-Charge. Note- Minimum 25% of executed area shall be covered over Kitchen, bath and toilet roof.

Fixing only old asbestos cement (corrugated or semi corrugated) sheets fixed with and including M&L for 'L' type, 'J' type hook or cranked bolt and washers complete all as specified and directed.

Dismantling of plain galvanised steel sheet any type and any size situated over/ under AC sheet roofing as a ridge or gutter complete all as specified and directed.

S & F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of blue colour having tensile strength of 550 MP as in roof covering / Ridge / cladding to wall fixed with self tapping screw complete all as specified and directed.

S & F for 0.63 mm thick plain galvanised steel sheeting with 120 gm Zinc (spelter) coating per sqm both sides inclusive as in ridges, hips, valley gutters drip and straight flashing fixed with L or J type hook and washers complete all as specified and directed.

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick (color) of having tensile strength of 550Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for providing cement concrete (1:2:4) type B-1 using 20 mm graded stone agg as in coping, benching, roof curb, rounded or chamfered on edges finished top surface even and smooth without using extra cement at any height complete all as specified and directed.

Dismantling mild steel work of any description fixed in any position not otherwise provided for complete all as specified and directed.

M&L framed MS work as in steel doors or gates of angle or other section including gusset plates, rails, bracket, MS plate, sheet etc. complete drilled for fixing of steel sheeting or other covering etc and similar works conforming to FE 410 complete all as specified and directed.

Fixing only old wind ties obtained from above item No. 34.00 complete all as specified and directed.

Dismantling wall or ceiling boards (fiber, pulp insulation etc) any thickness & at any height complete all as specified and directed.

Dismantling timber scantling under 40 Sqcm in section in framed work any position complete all as specified and directed.

M & L plain fillets rectangular in section, clean sawn, secured with nails and sectional area exc 3 & nexc 6 sqcm, using IInd class HW complete all as specified and directed.

S & F 4mm thick AC sheet plain building board fixed to timber framed work fixed with screws at any height complete all as specified and directed.

Fixing only old AC sheet plain building board fixed to timber framed work fixed with screws at any height complete all as specified and directed.

Taking down chowkhet or frame n.exc 1.50 sqm with shutters (wihtout taking of shutter from frame ) etc complete all as specified and directed.

Ditto all as per item No. 42.00 above but exc 1.50 Sqm but n.exc 4.00 Sqm each.

Taking down Shutters of any description not exc.1.0 sqm each complete all as specified and directed.

Ditto all as per item No 44.00 above but exc 1.0 Sqm but n.exc 2.00 Sqm each.

S & F plain solid straight chowkhat or frame rebated on the solid rounded or chamfered put together with glue pinned at joints in 2nd class HW complete all as specified & directed.

S & F for factory made glazed and Skelton shutters open rebated sand prepare to receive glass/gauge etc, without sash bars, edges of framing plain chamfered or rounded, fitted without mitred beads for securing glass etc size of members of shutters as specified in SSR Part 1 Sec 8 clause 8.24 (a) of IInd class HW 35 mm thick complete all as specified & directed.

S&F for factory made glazed and skelton window/ventilator shutters open rebated sand prepare to receive glass/gauge etc, with plain chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain chamfered or rounded, fitted cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part 1 Sec 8 clause 8.20 (b) of IInd class HW 30 mm thick complete all as specified & directed.

S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sidescomplete all as specified and directed.

S&F 35 mm thick factory made plain framed, panelled shutter (two panel) 2nd class HW rail and style with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S & F 75 mm size butt hinges medium weight cold rolled mild steel complete all as specified and directed.

S & F in repair 75 mm size butt hinges medium weight cold rolled mild steel complete all as specified & directed.

S&F 100 mm size butt hinges medium weight cold rolled mild steel complete all as specified & directed.

S & F in repair 100 mm size but hinges medium weight cold rolled mild steel complete all as specified & directed.

S & F mild steel helical door spring 150 mm ordinary rat tail type including roller and roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and directed.

S & F in repair mild steel helical door spring 150 mm ordinary rat tail type including roller and roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and directed.

S & F 250 mm long, mild steel sliding door bolt stove enameled black with bright bolt not less than 12 mm dia with and including a minimum 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S & F in repair mild steel sliding door bolts plate type stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, length of bolt 250mm complete all as specified and directed.

S & F 150 mm long mild steel barrel tower bolt stove enamelled black with bright bolt and fixed, complete all as specified and directed.

S & F in repair 150 mm long mild steel barrel tower bolt stove enamelled black with bright bolt and fixed complete all as specified and directed.

S & F 125 mm MS pressed handle oval type stove enamelled black complete all as specified and directed.

S & F in repair 125 mm MS pressed handle oval type stove enamelled black complete all as specified and directed.

S & F 100 mm MS pressed handle oval type stove enamelled black complete all as specified and directed.

S & F in repair 100 mm MS pressed handle oval type stove enamelled black complete all as specified and directed.

M & L for applying two coats of synthetic enamel paint over a coat of pink primer including preparation of newly wooden surfaces of any description exc. 10cm width or girth complete all as specified and as directed.

M & L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of newly steel surfaces of any description exc. 10cm width or girth complete all as specified and as directed.

Taking down steel chowkhat or frame with shutters (wihtout taking of shutter from frame ) of any description etc complete all as specified and directed.

S & F Steel window with side hung shutters including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded including one coat shop zinc chrome primer complete all as specified and directed.

S & F Steel window with side hung shutters including box type hinges with steel handle and steel peg stay complete without glazing bars dovetailed or welded complete all as specified and directed.

S & F Steel ventilator with top hung shutter including hinges steel peg stay complete all as specified and directed.

M & L MS work such as grills, grating etc with end of bars shouldered and/ or riveted or forged in to spikes framed guard bars barred iron doors; ladders; framed balusters, walk ways railing, framework of water tanks and similar works conforming to FE 410 Gde-310 complete all as specified and directed.

M & L PCC (1:2:4) type B1 using 20 mm graded stone aggregate as in bed block for fixing of angle iron post, hold fast and the similar work complete all as specified and directed

Taking down easing and adjusting wooden shutters of any description n.exe 1.0 sqm each and refixing in same opening complete all as specified and as specified and directed.

Ditto all as per item No. 73.00 here-in-before but exc 1.00 sqm and n.exc 2.0 sqm each and refixing in same opening.

S & F rubber beading 75 mm wide fixing with nail/screw complete all as specified and directed.

Dismantling floor, heath or wall tiling including cement mortar bedding and removing rubbish from the MD land complete all as specified and directed.

M & L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. laid over 15 mm thick screed bed in cement mortar (1:6) including jointing in neat cement slurry and pointed in coloured cement to match with shade of tiles complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n.exc. 15cm thick below or above ground level including tiles, etc complete all as specified and directed.

S&F 2nd class HW plain fillets, square, rectangular in section, clean sawn, secured with nails or brads, sectional area exc 13 & n.exc 25.00 sqcm complete all as specified and directed.

S & F anodised aluminium snap grid 605 mm x 605 mm frame work of angle 25 mm x 25 mm x 1.30 mm and main Tee 38 mm x 26 mm x 1.30 mm for false ceiling complete all as specified and directed.

S & F hangers 4 mm dia G.I.(upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. Flat 40 mm x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long complete all as specified and directed.

S & F of 9 mm thick PVC laminated gypsum board ceiling fixed with screws as per manufacturer instructions for any height complete all as specified and directed.

M/S ASM ENTERPRISES

GOPI CONSTRUSTION CO.

Bindra Builders

M/S ALOK SRIVASTAVA