Repair and Maintenance of G I Trestle Tower and compound wall and disposal of old trestle tower at Amini Lighthouse

Amount

Dismantling steel work in built up sections in angles, tees, flats andchannels including all gusset plates, bolts, nuts, cutting rivets, weldingetc. including dismembering and stacking within 50 metres lead, cost of all materials, labour etc complete as directed.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 15.12.1 Of area 3 sq. metres and below

15 mm thick cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix : 1:3 (1 cement: 3 fine sand)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete including cost of all materials, labour etc complete as directed.

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness .The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat . Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame

30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, havingthermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls, including cost of all materials, labour etc complete as directed.

15 mm nominal outer dia Pipes

32 mm nominal outer dia Pipes pumping line

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes

75 mm nominal outer dia Pipes for bore well

110 mm nominal outer dia Pipes

Providing and fixing following watersupply & sanitary fittings

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets,40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked black solid plastic seat and lid

White Vitreous China Wash basin size 550x400 mm with single 15 mm C.P. brass pillar taps

Providing and fixing 15mm C.P brass short body bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore including cost of all materials, labour, tools & plants etc complete as directed.

Providing and fixing 15mm brass bib cock of approved quality including cost of all materials, labour, tools & plants etc complete as directed.

Providing and fixing 15 mm C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 etc complete as directed including cost of all materials, labour, tools & plants etc complete as directed.

32mm GM wheel valve

Providing and fixing 15mm brass stop cock of approved quality including cost of all materials, labour, tools & plants etc complete as directed.

Providing and fixing gun metal non- return valve of approved quality,00 mm nominal bore.

Providing and fixing 15mm health faucet chromium of approved quality including cost of all materials, labour, tools & plants etc complete as directed.

Providing and fixing ready made HDPVC 10 to 15 fush per day septic tank and soak pit of reputed manufacturer of approved quality including providing necessay inlet and out let connection ,water connection with long boady piller tap etc as directed,supply of all labour , tools & plants etc compler as directed.

Providing and fixing ready made HDPVC water tank of 500 lit capacity of reputed manufacturer of approved quality as directed,supply of all labour , tools & plants etc compler as directed.

Charges for providing bore well with PVC pipe of 75mm dia with all acessories

Providing and fixing 0.50 Hp centifugal monoblock pump set with all fittings

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats to the compound wall

Painting two coats with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour to the trestle tower

Scrap value of tower dismantled trestle parts kept in the lighthouse premises including cost of all labour for loading transportation unlading etc & removal from the Lighthouse premises (Amount to be deducted).

bijoys.k.Abraham

Ajayakumar.M.C

LUCKY DECOR