GUEST HOUSE CIVIL & INTERIOR WORK

DISMANTLING AND — emolishing cement concrete manually/by mechanical means including disposal of material within 50 metres lead as per direction of Eng eer-in- Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)."

Demolishing brick work — emolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable materia within 50 metres lead as per direction of Engineer-in- Charge.In cement mortar."

Dismantling cement asbestos — smantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of nserviceable materials within 50 metres lead.

Civil Work — roviding and laying of permanent piping technology anti-termite treatment before flooring work by installing LLDP (Low linear densit polyethylene) tube of 8 mm O.D. & 6.4 mm I.D.with inbuilt pressure compensation chip at every 30 cm interval in the tube, having wor ng pressure of 2 kg/cm2 and release rate of 1.9 ltr/hour fixed by P-clips and nails. The LLDP pipe shall be installed at the entire riphery of the building and at internal network of building at a depth of 20 to 200 mm under floor at every 2 to 3 mtr. c/c distance adjusted as per building layout) & Ends of loop pass through a PVC elbow of minimum 32mm ID at junction box of wall and floor level, ntering into a steel reinforced grooved flexible pipe of minimum 22 mm ID leading into Junction box and the loops shall terminate in unction boxes & test every junction during injecting chemicals for termite control treatment. The anti- termite chemical Imidaclopri 30.5% SC mix as per IS-6313, (part III) shall be injected by the pressure pump diluted with water @ 10.5ml/5 ltr of water at the rat of 2 kg/sq.cm. @ 5Ltr/SMT. The contractor shall submit approved line plan for piping system and junction boxes dully approved by Eng eer-in- charge with bond of 5 year warranty.Anti-termite chemical injected area"

Granite Door frame — ranite Door frame for 200mm thick wall Thickness.Providing and fixing 16mm thick gang saw cut mirror polished premoulded and prepol hed machine cut Granite of approved shade, colour and texture of Granite Door frame. in cement mortar 1:3 (1 cement :3 sand) includi pointing ith an admixture of pigment to match the shade including fixing of granite stone door frame with epoxy resin based adhesiv including secured to the backing by means of cramps, drilling of hole with rawl plugs and screws 75mm long cleaning etc. complete. I luding rubbing, curing, moulding and polishing edges to give high glossy finish and drilling of hole for fixing stainless steelhing aldrop, towerboltetc complete at all levels as per instruction of Engineer-in-Charge."

vitrified floor-tiles — ) Size 600X600 mm thickness 11-12mm (to be used heavy duty indoor areas of non residencial buildings only such as schools, hostels, braries hospitals, institutions, offices etc.) Providing and laying vitrified floor-tiles Full Body Design Homogenous Body matt/rust finish in different size with water absorption less 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st q lity/ premium quality in flooring laid on 20mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white ceme and matching pigments etc. complete

Steel Work — teel work in built up M.S. tubular section (round, square or rectangular hollow tubes etc.) trusses/frame work etc. including cuttin hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped ashers etc. complete.take 20kg per sq.m "

white cement based putty — oviding and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, Like birla white /JK wh e or equivalent, over the plastered wall surface to prepare the surface even and smooth i/c all cost of material, labour and scaffol etc in all position complete.

Wall Painting — all painting by any mechanical or manual means with plastic emulsion paint of approved brand and manufacture to give an even shade: o or more coats on new work Two or more coats on new work"

synthetic enamel paint — ainting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work.Two or m e coats on new work"