Construction of Cocoon Auction Market shed near D G office at Directorate office Sericulture Dev. Deptt. Jammu

Amount

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells , cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All kinds of soil:

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with: 1:4:8( 1 cement : 4 coarse sand: 8 graded stone aggregate 40 mm nominal size)(Including all carriages and leads).

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering , shuttering , finishing and reinforcement. All works upto plinth level. 1:1½:3 ( 1 cement :1½coarse sand:3 graded stone aggregate 20 mm nominal size) (Including all carriages and leads).

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with:1:3:6 ( 1 cement : 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) (Including all carriages and leads).

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc, in layers not excluding 20 cm in depth, consolidating each deposited layers by ramming and watering, lead upto 50 m and lift upto 1.5 m.

12 mm cement plaster of mix.1:4 ( 1 cement : 4 fine sand) (Including all carriages and leads).

Centering and shuttering including strutting , propping etc and removal of form for:

Foundations, footings, bases of columns etc. for mass concrete.

Columns , pillars , piers, abutments , posts and struts.

Edges of slabs and breaks in floors and walls. Under 20 cm wide.

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10 sqm over and including priming coat of exterior primer applied @ 2.20kg/10 sqm).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-mechanically treated bars of grade Fe-500D or more.

Structural Steel work welded in built up sections,trusses and framed work, including cutting , hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing corrugated G.S sheet roofing including vertical/curved surface fixed wth polymer coated J or hooks, bolts and nuts 8mm diameter with bitumen and G.i limpet washers or with G.I limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete ( upto any pitch in horizontal/ vertical or curved surface) excluding the cost of purilins and trusses and including cutting to size and shape whereever required . 0.63mm thick with zinc coating not less than 275gm/m2.

Providing ridges or hips of width 60 cm overall width plain G.S sheets fixed with polymers coated J.or hooks , bolts and nuts 8mm dia G.I limpet and bitumen washers complete. 0.63mm thick with zinc coating not less than 275 gm/sqm.

Providing and fixing 25 mm dia bolts with nuts including treading complete 3"-0 long ( Tata)

Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade. New steel work ( two or more coats)

MANZOOR AHMED NATNOO

SHIVINDER KUMAR RUKWAL

M/s Mir and Co

IMTIAZ AHMED