Special Repair work to Building of Haryana Bhawan New Delhi

Amount

Removing door and windows (wood and steel) with chowkats by making recesses in walls when the wall is not to be dismantled:- (b) Windows [HSR 8.18]

Removing glazing fixed or openable (wood and steel) including chowkhat holdfasts and concrete block. (b) by making recesses in walls when the wall is not to be dismantled.[HSR 8.23(b)]

Dismentling brick or flagged stone slab flooring including concrete base.[HSR 8.27]

Dismentling plank ceiling and supporting timber.[HSR 8.30]

Scraping of white wash and colour wash [HSR 8.32 (a)]

Dismentling white or coloured glazed tiles.(to be carefully removed) [HSR 8.38]

Providing & fixing False Ceiling with grooves with 12mm to 15 mm thick,600mm X600mm best quality mineral fiber tiles of approvede make fixed on MS Steel runners frame i/c cost of screws,angles,cleats,rawel plugs,with taping and paiting etc.complete in all respect as approved by the Engineer-In- Charge(HSR 13.93)

Providing & Fixing Vitrified Tiles 600mm x 600mm of approved make in flooring laid in any pattern as specified over base of 20 mm thick cement coarse sand morter 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles. Note:- Tile shall be of premium quality (first quality) of reputed manufacturer like: NITCO, KAJARIA , SOMANI, ORIENT BELL, JOHNSON, RAK AND SIMPLOLO , (Double charged tiles shall be used (HSR-14.89). Note:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material

Providing & fixing vitrified tiles of size 600mm x 600mm of approved make in skirting/dados laid including cutting as per drawing in any pattern as specified over base of 12mm thick cement coarse sand mortor 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles. Note:- Tile shall be of premium quality (first quality) of reputed manufacturer like: NITCO, KAJARIA , SOMANI, ORIENT BELL, JOHNSON, RAK AND SIMPLOLO , (Double charged tiles shall be used (HSR-14.90). Note:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material.-

Providing & Fixing Ist quality Ceramic glazed wall tiles confirming to I.S. 15622 (thickness to be specified by the manu-facturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-In-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 coarse and jointed with grey cement slurry, including ointing in white cement mixed with pigment of matching shades complete. (a) Size of ceramic Glazed tiles 300 x 450 mm of reputed manufacturer like:- NITCO, KAJARIA , SOMANI, ORIENT BELL, JOHNSON, RAK AND SIMPLOLO shall be used as approved by Engineer-in-charge. [HSR 14.92(b)]. Note:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material.

20mm thick cement plaster 1:2 in 2 coats work. [HSR 15.13]

Applying priming coat with cement primer in all shades on newly plastered or concrete exterior surface. (Note:- First quality paint of reputed make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shalimar Shalimar Shall be used as approved by Engineer-in-charge in writing, Drum of paint shall be opened in presence of Engineer-in-charge). (HSR 16.25).

Providing two coats of exterior acrylic emulsion paint. (Note:- First quality paint of reputed make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shalimar Shall be used as approved by Engineer-in-charge in writing, Drum of paint shall be opened in presence of Engineer-in-charge). [HSR 16.79 (b)].

Providing and applying two coats white cement based putty over plastered surface and grindling the surface smooth with sand paper to get an even and smooth finish including cost and carriage of all material, labour charges, scaffolding, sundries etc. complete. (Note:- reputed make Putty such as J.K./ Birla shall be used as approved by Engineer-in-charge). (HSR 16.81)

Providing and fixing aluminium work for doors windows, ventilators and parti-tions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS, 733 and I”S : 1285 fixed with rawlplugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required neoprene felt etc. aluminium sections shall be smooth, rust free straight mitred and jointd mechanically wherever required including cleat angle. Aluminium snap beading for glazing/panclling C.P.brass/stainless steel screws, all complete. [HSR 17.95] Fixed portion: (Anodised aluminium transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15) Note :- Add Rs. 20/- per Kg. extra if powder coating of 50 micron is done instead of anodizing. [Rs. 242.30+20.00 = Rs. 262.30]

Providing and fixing aluminum work for doors, windows, ventilators and portions with excluded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS;733 and IS;1285 fixed with rowel plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions hold fasteners, at top, button, and sides with required neoprene felt etc. aluminum sections shall be smooth, rust free straight mitered and jointed mechanically wherever required including clear angle, aluminum snap beading for glazing/paneling C.P brass/stainless steel screws, etc complete, shutters of doors, windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of PVC/neoprene gasket required including Aluminum fitting(HSR 17.96) Note :- Add Rs. 20/- per Kg. extra if openable polyster powder coating of 50 micron is done instead of anodizing. [Rs. 253.70+20.00 = Rs. 273.70]

Providing and fixing glazing in aluminium door windows, ventilator shutter and partitions etc. with pvc/neoprene gasket etc. complete (cost of aluminium snap beading shall be paid in basic items) [HSR 17.98] (b) With float glass panes of 5.0mm thickness.

Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked for door including cost of cutting floors as required embedding in floors and cover\plates with brass pivot and single piece M.S. sheet outer box. (a) With Stainless Steel cover plate. [HSR 17.99]

Providing and fixing aluminium round shape handle of outer dia 100mm with screws etc. complete. [HSR 17.102(i)] (i) Anodized (AC-15) aluminium.

Laying and fixing Granite stone in all shades 15mm to 18mm thick in skirting/dado, risers of steps, pillars and wall facing, laid in any pattern as specified over base of 12mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of granite including labour for fixing cramps pins and dowels etc. The Granite/ Italian marble stone shall be provided by the Deptt. [HSR-14.95] (LR)

Laying and fixing Granite stone in all shades 15mm to 18mm thick in flooring, laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of granite stone. The Granite/Italian marble stone shall be provided by the Deptt. (HSR: 14.96) (LR)

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). [NS-3]

Providing & applying texture of approved brand and manufacture to give on Smooth finishing including scrapping of old finish completely including sand Papering & preparation of base with one coat of primer pain of approved brand & Manufacture, including filling the surface with cement base putty wherever required & applying rustic texture to give the smooth surface[NS6]

Removing of cracked portion of RCC work from the existing exterior face of Extension Block by using the tools required for same i/c all material & labour but except the cost of scaffolding.[NS-7]

Scrapping of old texture.[NS-8]

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done.[NS-9]

Removing of Malba. Note:- In Case of any difference in the DNIT & Nomenclature of any of HSR Items of Civil, PH & EI work Depicted in this DNIT and that given in HSR, the unit and nomenclature given in HSR shall be applicable 2. Only reputed make material will be used (Make-brand exhabited in HSR and exhibited in approved standard documents as approved by Engineer-in-Charge, while executing various items/ works at site.

Rajesh Goel