SPECIAL REPAIR TO MD ACCN BLDG NO P-9, P-42 AND P-43 OF 76 FD REGT AT OLD AMRITSAR CANTT

Amount

B/R portion Dismantling brick tiles laid in single layer jointed & pointed in cement mortar complete all as specified and directed.

Demolition of mud phuska in roofs, any thickness, including leeping plaster (whether full thickness removed or only a part thereof) complete all as specified.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in roof padding complete all as specified and directed

M&L for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm including cleaning surfaces etc complete all as specified and directed

S&F (minimum) 3mm thick APP film based poly meric membrane minimum weighing 3Kg per Sqm reinforced with polyester non wove fabric (weight not less than 150 gms/sqm) land on primed surface by forced application along the length of 100mm lapping strip to either sides and sealed in after cleaning down the roof by brooms complete all as specified and directed.

M&L for 40 mm thick brick tiles laid over & including 15mm thick cement mortar 1:6 and joints grouted flush in cement mortar ( 1:3) mixed with 5 % of crude oil by weight of cement complete all as specified and directed

All as per Srl item No 6 above here-in-before but except tiles (old serviceable tiles obtained from dismantling) shall be reused after necessary cleaning of mortar)

Material and labour for cement concrete (1:2:4), type B-0 using 12.5mm graded stone aggregate as in benching, kerbs, mud stop, rounded or chamfered on edges including form work complete all as specified and as directed.

Dismantaling of brickwork, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed

M&L for Brick work with sub class "B: bricks straight or curved on plan exc 6 m mean radius in CM 1:4, all as specified and directed.

All as per item No 10 here-in-Before but except bricks (old serviceable bricks obtained from dismantaling shall be reused after necessary cleaning of mortar)

Taking down cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water etc, all as drected.

M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 using WPC 2% of weight of cement and finishing even and smooth without using extra cement complete all as specified and directed. (WPC measured and paid saperatly)

Supply only integral water proofing compound

All as per Item No 13 here-in-before above but in CM 1:6.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint of shade as approved on wall surfaces complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper over coat of primer on walls complete all as specified and directed.

M&L Granite work (of any type) (table rubbed and polished) 20mm thick in steps , jambs, pillars, window cills, cooking plateforms and like in cemnet mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite (Black) over and including 15mm thick rendering in CM 1:4, all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises all as directed.

S&F non skid ceramic light coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 15mm thick screed bed in CM 1:6 & complete all as specified and directed.

All as per item No 20 here-in-before but on vertical surfaces but on rendering 10mm thick in CM 1:4.

S&F glazed ceramic coloured tiles 450x300mmx6mm thick, etc. on vertical surfaces such as skirting , dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering plaster in CM 1:4 on brick surface complete all as specified and directed.

M&L Cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in floor topping, 40mm thick, surfaces finished even and smooth without using extra cement complete all as specified.

Dismantling of boarding any description fixed in any position with screws complete all as specified and as directed.

S& F 18 mm thick PVC board as in shelves for kitchen cabinets etc all as specified.. Make Rajshri/ Sintex

S& F 18 mm thick PVC shutters one side prelaminated of any shade for kitchen cabinets etc all as specified. Make Rajshri/Sintexx

S& F 40mm long self closing type hydraulic steel hinges complete all as specified

S&F 75 to 80 mm long stainless steel handle complete all specified.

M&L in repair for Block Boards, 19/20mm thick, grade 1 quality , exterior grade, commercial type, fixed with screws/welding to frame work as in Shelves and shutters of cupboard complete.

M&L for external teak wood lipping, 6mm thick to 18/19mm thick block board or prelaminated particle board, fixed with nails including french polish etc complete all as specified.

S&F 100mm long Hasp and staple , safety type, Aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws

S&F stainless steel butt Hinges, 100mm size, medium weight, cold rolled mild steel complete all as specified and directed

Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Square metre each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts complete all as specified.

All as per item No 33 above here-in-before but exc 1.5 sqm and n. exc. 4 sqm each complete all as specified & directed

Material and Labour for Box type steel window made of ERW tube P- section of size 60 mm x 25 mm single rebated outer frame, comprises gauged skelton shutter frame of ERW tube P-Section size 50mm x 20mm with one/two Nos openable leaf for each shutter consisting of two Nos Sashbar of T-section 20 x 3 mm welded to frame with one No verticle mullion of ERW box type T Section of size 60mm x 25mm and FI 2mm thick welded/screwed to frame for fixing of wire gauge including fittings and fixture like as Handle, Tower Bolt, Stopper, Cleat, Pintal hinges, holdfast etc as given below and all as shown on drg No CEJZ/TD-1019/08 & CEJZ/TD-1020/08 Sh 1/3 to 3/3 dt 01 May 2008 complete. (a) Hold fast 150mm long of 12mm x 3mm MS flat - 4 Nos per Window.(b) Handle of Z section 20mm x 25mm, 100mm long- 01 No per leaf.(c) MS tower bolt 150mm long - 02 Nos/leaf.(d) Z Section stopper 20mm x 25mm, 100mm long - 01 No per leaf.(e) Cleat 55mm long of hollow square 15mmx12mm - 02 Nos per leaf.(f) MS pintol hinges size 75mmx12mm - 2 Nos per leaf. Note :- Guard bars, wire mesh and painting shall be measured and paid sperately.

All as per item No 35 above here-in-before but for glazed skeleton shutter

S&F Box type ventilator fixed type with glazing bar as per drawing No CE JZ-70/06-07 dated 07.06.07 with guard bars including priming coat complete all as specified and all as directed

S&F 3 mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads (supplied alongwith shutters), in squares n.exc 0.50 Sqm complete all as specified.

All as per Srl item No 38 above but figured glass pin head type & glazing with oil putty

Supply and fixing mild steel framed work of E-165 (Fe 290) as in grills/guard bars shouldered with steel window/ ventilator frames complete all as specified.

S&F Framed work confirming to FE- 290 (Gde-E- 165) as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete

M&L Cement concrete (1:2:4), type B-1 using 20mm graded stone aggregate as in bed block of hold fast, coping including necessary form work complete all as specified and as directed.

S&F factory made 30-40 mm thick Flush shutters, any number of panels, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specfied and directed.

S&F 35 mm thick,2nd class hard wood (Hollock), glazed and skeleton shutters open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc for doors, size of members as specified in clause 8.24 (a) of MES Schedule Part-I Section-8, complete all as specified.

S&F 300 mm mild steel ordinary rat tail door spring including roller and roller plate complete all as specified.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed

S&F 300mm long Aluminium alloy. Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed

S&F Aluminium, anodised, barrel tower bolts 200mm of extruded section and fixed

S&F 150mm long Aluminium handles, cast type anodised

S&F Aluminium alloy body and tongue and roller plate floor door stopper of 150mm size fixed with steel screws complete all as specified.

M&L Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site .

S&F stainless steel butt Hinges, 75mm size, medium weight, cold rolled mild steel complete all as specified and directed

S&F Aluminium, anodised, barrel tower bolts 150mm of extruded section and fixed

Material and labour for preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified.

Material and labour for preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

S&F in repair vitreous China Squatting pan 'Orrisa' pattren size 580x440mm white with integral foot rest and PVC(SWR) 'P' trap 110mm bore complete.

S&F in repair 10 Ltr capacity PVC valveless symphonic action type flushing cistern white low level with ball valve flote handle including bracket and flush pipe of polythylene of low or high density or PVC,32mm dia complete all as specified and directed

S&F in repair wash hand basin, flat back 550x400mm vitreous china (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing as in repair complete all as specified and as directed.

S&F in repair Pillar taps 15mm bore, cast copper alloy , with capstan heads, chromium plated , screwed down high pressure , with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe and fixed, all as specified and as directed.

S&F PVC connection 15mm size with PTMT nuts of length 600mm.

S&F in repairs chromium plated angle valve 15mm bore fancy type screwed down for high pressure complete all as specified and directed.

Dismantling water tanks exc 250 Ltr & not exceeding 500Ltr and S&F rotational moulded polythene, triple layers, water storage tank 500 Ltr capacity, closed top, cylindrical, hoisted and fixed in position including S&F 20mm bore PTMT ball valve epoxy coated minium weight 210gms with aluminium rod complete all as specified and directed

Taking up or down existing steel water tubing, 15mm bore alongwith connections fixed/laid in any situation, complete all as specified and as directed.

Taking up or down existing steel water tubing, 20mm bore alongwith connections fixed/laid in any situation, complete all as specified and as directed.

S&F Galvanised iron steel water tubing, 15mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and as directed.

S&F Galvanised iron steel water tubing, 20mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and as directed.

S&F Galvanised iron steel water tubing, 25mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and as directed.

Fixing only, after cleaning old steel water tubing, 15mm bore and connections in new or old position using new fittings complete all as specified and as directed.

Fixing only, after cleaning old steel water tubing, 20mm bore and connections in new or old position using new fittings complete all as specified and as directed.

S&F in repair of brass cromium brass plated fancy type bib taps 15 mm bore long nose screwed down screwed for iron pipe or for brass complete all as specified and directed .

S&F in repairs 125mm CP shower rose fancy type with CP arm complete all as specified and directed.

S&F in repair 15mm bore Stop valves, cast copper alloy, screwed down , high pressure, with crutch or butterfly handles , screwed both ends for iron pipe or for unions, fancy type, chromium plated with long shank and cup ( concealed type) and fixed.

Supply and fixing decorative mild steel coloured curtain rod of 20 mm dia powder coated approved pattern & design including side cups & powder coated mild steel flat iron brackets fixed with steel screws & PVC rawl plugs complete all as specified.

Taking down eaves gutters and rain water pipes ( any size or pattern) , including all fittings , heads, shoes, bends, swan necks, etc., including cleaning or refixing or removal from site ( measured overall as fixed along the centre line over fittings and accessories

S&F 110mm bore PVC(SWR) pipes single socketed in any length fixed to walls with dash true nut and bolt at every 2mtr length including) including all fittings complete all as specified and directed by Engineer-in-charge Make:-supreme,Finolex,Jyoti.

S&F 110mm bore PVC (SWR) bends any radius With access door

S&F 50mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc.

S&F Stainless kitchen steel sink 1mm thick sheet of over all size 495x420mm with boul size 410x330x160mm including CP waste coupling and PVC waste pipe up to chamber fixed on and including cantilivers angle iron brackets of 2nos 25x25x3mm complete all as specifide.

S&F in repair stainless steel kitchen plate rack size 900 x 750 x 300mm deep made out of 1mm thick sheet including fitting arrangement complete.

Complete removal of existing treatment including preparation of surfaces of walls & applying two coats of cement base paint complete all as specified

Complete removal of existing treatment from walls/ ceilling etc. by carefully scraping or by sandpapering or by any other means & material and labour for preparing surfaces preparatory to distempering and M&L cement base putty as required including preparing the surfaces smooth by rubbing or sandpapering and M&L for applying two coats of oil bound distemper over coat of primer on walls/ceiling complete all as specified.

Material and labour for machine cut kota stone slab 20 mm thick as in flooring of size not less than 0.25 Square metre each, set and jointed in cement slurry over& including screed bed of 20 mm thick in cement mortar (1:6) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and polishing complete all as specified and as directed.

Material and labour for machine cut kota stone slab 20 mm thick as in skirting,dado of length not less than 500 mm each unit, set and jointed in cement slurry over & including screed bed of 10 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and polishing complete all as specified and as directed.

E/M Portion Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete with fittings such as switches, ceiling roses, pendants, sockets, lamp holders, brackets, bulk head fittings, tube light fittings etc. and making good disturbed surfaces of walls etc. as per existing finishes by plastering, repairs and white / colour wash etc. complete all as specified and directed.

S & F point wiring for one light point / fan point / bell point , controlled by one, one way switch with 1.50 sqmm size PVC insulated unsheathed 1100 volts grade single core (multi-stranded) copper conductor cable (FR) drawn into and including medium grade PVC conduit concealed (not less than 20 mm dia) all necessary fittings and accessories fixed concealed (including chase cutting in brick/stone masonery wall for fixing conduit and plastering the external surfaces and matching the same with existing suface) and sunk cast iron or pressed steel terminal boxes for mounting fitting like switches, sockets, lamp holders, sketch fittings and covered with 3 mm thick plastic laminated bakelite sheet cover fixed with brass screws and cup washers including one continuous run of PVC insulated 1.50 sqmm size copper conductor cable as in earth wire and connected to common earth dolly complete all as specified and directed, are as follows :-Make RR Kabel/Polycab/Havells (a) One light/one fan/one bell point controlled by one, one way switch.

All as per item No 86, one light point controlled by two Nos of two way switch.

All as per item No 86, one socket outlet 5 pin 5 Amp controlled by one, one way switch on same board.

All as per item No 86, one socket outlet 5 pin 5 Amp controlled by one, one way switch on indipendent board.

All as per item No.86 hereinbefore but wiring with using cable 2.50 sqmm size copper wire (FR) and earth wire of PVC insulated (Green colour) 2.50 Sqmm size copper wire (FR) for one 6 pin socket outlet, 16 Amperes on independent board.

Supply and fixing of switch piano flush button single pole one-way 5 Amper complete all as specified and directed.

Supply and fixing of switch piano flush button single pole two-ways 5 Ampere complete all as specified and directed.

Supply and fixing of socket outlet 5 Ampere, 2 and 3 pins (TOTAL 05 PINS), flush type 250 volts AC complete all as specified and directed.

Supply and fixing of switch piano flush button single pole one-way 15 Ampere complete all as specified and directed.

Supply and fixing of socket outlet two-in-one, 3 pin each suitable for 5 and 15 Amperes flush type, 250 volts AC complete all as specified and directed.

Supply and Fixing Ceiling rose, surface bakelite 3 terminal, 240 volts, 5 Amps with back plate of 3 mm thick bakelite, laminated hylem sheet of appropriate size ,complete ,all as specified.

S & F lamp holder, PVC / polycarbonate type insulated body with back plate suitable for batten / angle fittings complete all as specified and directed.

Supply and fixing of single phase call bell ‘DING DONG’, AC 230 volts single pole fixed over and including pressed steel sunk box of size 175 X 100 mm duly covered with 3 mm thick bakelite sheet complete all as specified and directed.

S&F bell push, flush type, single pole 5 amps complete all as specified and directed.

S & F MCB single pole, 240 volts, 6 to 32 Ampere, rupturing capacity 10 KA, ‘C’ curve type complete all as specified and directed.

S & F MCB double pole, 240 volts, 40 to 63 Ampere, rupturing capacity 10 KA, ‘C’ curve type complete all as specified and directed.

S & F sheet metal enclosure for DB’s (Double door type) when MCB’s to be used, single pole and neutral, 8 ways with 200 ampere rated bus bar, 240 volts fixed sunk / flush to the wall with IP-43 and IK-09 protection complete all as specified and directed.

S&F MCCB Incomer distribution board double door vertical type made out of CRCA MS sheet surface with insulated material like polyester or with epoxy powder coating surface mounting TPN 4 way, 415 volts with copper bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCCB and IP 43 - IK 09 protection with and incl 100 amp 25 kA 4 pole MCCB with thermal - magnetic setting and Icu = Ics = 100% including Suitable type MCB with blank plate including taking down old MCCB all as specified and directed complete all as specified. . (Note : The cost of removing old wooden/steel box etc and making good of surface as original by brick work, plastering, whitewash/colour/distemper etc is included in quated rate)

M & L for sub main wiring with 1100 volt grade two single core FR Wire PVC insulated and unsheathed cable with stranded copper conductor 6 sqmm drawn into and including electrical grade PVC conduit not less than 25 mm dia with IS 9537 (Part-III) 1983 mark, or relevant ISI mark with all accessories fixed concealed including chase cutting in brick/ stone masonry for fixing conduit and making good the disturb surfaces of wall as per existing including 6 sqmm multi - stranded copper conductor as earth wire in green colour complete all as specified and directed. Including taking down old unserviceable sub main wiring .NOTE: 2 single core 6 sqmm and one 6 sqmm cable and PVC conduit shall be measured as one RM.

S & F wall /ceiling mounting LED 18 Watt pride plus/smart line tube light fitting complete with all acessories 1x18 Watt LED , suitable for domestic application, 240 Volts, 50 Hz, and internally pre-wired with 1.5 sqmm twin twisted flexible cable copper conductor and connection complete as per or its equivalent approved make inj complete all as specified and directed.

S & F in repair wall /ceiling mounting LED 9 Watt tube light fitting complete with all acessories 1x9 Watt LED , suitable for domestic application, 240 Volts, 50 Hz, and internally pre-wired with 1.5 sqmm twin twisted flexible cable copper conductor and connection complete all as specified and directed.

S&F energy saving new generation 10 watt LED built up, 6000k bulk head luminaire with opal diffuser light fitting complete with all acessories and connection complete.

Supply and fix in replacement of security light fitting LED 25 Watt aluminum pressure dia cast housing with touched glass cover IP-66 protection Including suitable size and accessories complete mounted including connection with 3 core PVC insulated overall sheathed flexible cable with muyltistranded copper conductor of size not less than 1.0 sq mm from celing rose to fitting terminal including taking down old CFL security light fitting all as specified and as directed.

S & F fan regulator electronic step type socket size and making all necessary connections complete all as specified and directed.

M & L for earthing complete with galvanised earth plate electrode 600 X 600 X 6 mm thick buried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of earth plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire 4 mm dia by means of nuts, bolts, check nuts & washers of galvanised iron or steel all as shown on electrical plate No. 3 of MES schedule 2009, Part – I (Specifications) and connected to main switch board / main DB’s / earthing test point including all necessary excavation and earth work in any type of soil, adequate quantity of charcoal dust & common salt all around the earth plate minimum 150 mm in all directions with & including watering pipe 20 mm dia GI medium grade, GI funnel made out of 0.63 mm thick GI sheet, wire gauge, 50 mm thick RCC cover in PCC 1:2:4, type B-1, duly reinforced with 6 mm dia mild steel round bars @ 150 mm both ways center to center with suitable lifting handle to cover, earth pit of PCC 1:3:6 type C-1, GI protection pipe light grade 15 mm bore up to 7.5 m length from earth electrode & engraving of earth marking on nearby building with CM 1:4 plate size 200 X 150 X 15 mm & painting of earth result etc. including testing on complete all as specified and directed. Note : - (i) Earth lead and protection pipe beyond 7.5 m shall be measured and Paid separately. (ii) On testing after completion of job, if desired earth resistance is not obtained, the earthing shall be redone by the contractor without any extra cost to Govt.

S & F 25 mm bore light grade galvanised iron tubing with all necessary GI fittings as in protection pipe of cable, fixed to pole or laid under floor / ground / under road crossings for protection of cable complete all as specified and directed.

S& F GI bracket light grade GI Pipe 1.2 mtr Length for fixing of street light fitting 25/45/60 Watt including connection all as specified and directed.

S&F LED Blub 9 Watt pin type 220 Volts complete all as specified and directed.

Excavation in trenches in soft/loose soil not exceeding 1.5 meters wide and not exceeding 1.5 meter depth for foundation for LT cables complete all as specified and as directed.

Returning filling in trenches including spreading leveling watering and well ramming in layers each not exceeding 25 cm in soft/loose soil complete all as specified

Removing surplus spoil to a distance not exceeding 50 meter and depositing where directed at a level not exceeding 1.5 meters above the starting point, complete all as specified.

M&L for Sand cushioning to UG cable 40cm wide 15cm and 10cm thick above and below the cable in trenches/ducts complete all as specified and directed by Engineer-in-Charge. Note : - Thickness after punning down shall be measured.

Supply and laying burnt brick sub class 'B' modular size, for cable protection laid length wise perpendicular to the axis of cable complete all as specified and directed.

M & L for laying of LT cable of 1100 volt XLPE insulated and PVC sheathed of size 25 sqmm 4 core with armored cable gland including taking down old unserviceble cable complete all as specified and directed by Engineer-in-Charge.

S & F MCB single pole, 240 volts, 40 Ampere, rupturing capacity 10 KA, ‘C’ curve type complete all as specified and directed.

Surinder Pal