08/HDA/EC-ELECT/2020 2021(2nd call)

Items

Supply, delivery and installation of FLORIAN Lighting Poles (K-LITE ID-KP4327 P11, Height-4270, Pole Size-60.3 mm dia, Mounting KP-34) with accessories.

Supply, delivery and installation of Post top Luminaires GENESIS (K-LITE 5436, 60W LED, Light Colour-Green, D2-480 x 417 x 850) with accessories.

Foundation Bolts with Nuts and Washer for FLORIAN Lighting Poles, Mounting KP-34, K-LITE (M16 X 500) (2 nuts,2 plain washer & 4 nos bolts). As per drawing.

Supply, delivery and installation of AJNA BOLLARD (K-LITE 4758, 24W LED, Mounting- M42, Colour-Blue, Ø200 X 906) with accessories.

Foundation Bolts with Nuts and Washer for AJNA BOLLARD Mounting- M42, (M12 X 300), (2 nuts,2 plain washer & 4 nos bolts).As per drawing.

Foundation for installation of FLORIAN Lighting Poles.

Foundation for installation of AJNA BOLLARD.

Supply, delivery and installation of NAVI Light fittings (K-LITE ID-6805, Ø166x153x557, Mounting M2, 45W LED) with accessories. For Statue lighting.

Foundation Bolts with Nuts and Washer for NAVI Light fittings Mounting- M2, (M8 X 150) (2 nuts, 2 plain washer & 4 nos bolts).As per drawing. For Statue light.

Foundation for installation of NAVI Light fittings

Supply and delivery of 3 C X 2.5 Sqmm Copper PVC insulated & PVC sheathed unarmoured cable as per IS-694 .(Make-KEI, Polycab,Havells or equivalent)

Supply and delivery of 1.1 KV grade 4 C X 16 Sqmm XLPE insulated and pvc sheathed aluminium armoured Cable. As per IS 7098.(Polycab,Havells or KEI)

Supply GI earth Spike (1830 X 20 mm) (Each Pole).

Earthing complete with driving of earth spike & connection of earth electrode with non current carring metalic parts of supports(each pole)

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages (ii) No. 6 SWG

SUPPLY OF HDPE PIPES, RATES OF HDPE PIPES GRADE - PE63,SDR 11 (PN-10.0), OD-40 mm and thickness min. 3.70 mm.

Labour for fitting and fixing high density poly-ethilene pipes or P.V.C pipes for below ground work including cost of jointing materials paints etc fitting and fixing all necessary specials, cutting pipes, making threads, cutting holes in walls or R.C.floor where necessary and mending good all damages excluding the coast of masonary or concrete work,if necessary,but including the cost and fitting and fixing holder bat clamps(any floor) or for underground work including cutting trenches min. 760 mm and refilling the same complete as per direction of the site engineer-in-charge.(Payment will be made on centre line measurement of the total pipeline including specials.)

Laying only Cable upto 50 sq.mm through existing RCC/Hume/ GI pipe /open masonry trench for single, 2, 3, 3½ & 4 core

Laying of Cable by Jack push method through micro tunneling 2-3M deep under black top surface with excavation of double earth pit 1400×600×3000 mm on hard soil, laying of pipe, refilling and ramming of soil in earth pit, restoration of road surface etc (Excluding the supply of GI Pipe)

Supply & fixing medium gauge GI Pipe (ISI-Medium) Protection with necessary fittings and jointing materials as required. 50 mm dia

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below: i) 4 core X 16 sqmm

Supply, delivery, installation, testing & commissioning of single phase Feeder pillar box of size 1000 X 1000 X 400 mm made of 4 mm thick CRCA steel sheet with zinc powder coated outdoor type with top canopy, sides having lovers for ventilation, double door, complete with cu bus-bar, provision for installation of single phase meter at right side of the feeder pillar with individual locking arrangement as per direction of engineer-in-charge. (Consisting of following items in the feeder pillar) i) 40 Amp , 230 Volt Double Pole MCB 10 ka Breaking capacity -1 no ii) TP 240 Volt 40 Amp air break AC Coil contactor -1 no iii) Mechanical Time Switch of daily dial with battery backup -1 no iv) 16 Amp. SPMCB "B" Curve of 10 KA Breaking Capacity -4 no. v) Indicating LED Lamp (Gen Next LED Indicator 22.5 mm ) -2 No vi) Cubical Ilu Lamp & Switch - 1 No. vii) 1Ph Voltmeter Cl 0.5 of 50-550 VAC (P-P) viii) Toggle switch - 1No ix) Power Connector 4 Way 32 Amp -3 Set x) 1Ph Ammeter Cl 0.5 with C.T xi) Copper Wire for internal wiring Installation of the feeder to be done by the earth cutting, brick soiling and cc foundation as required & sand filling, ramming and muffing around the feeder pillar box by brick and cement mortar work as per the direction of the Engineer-in-charge.

Finishing of the XLPE/PVC insulated armoured cable ends by soldering with cable sockets and insulated tapes etc., including supplying sockets, soldering materials, tapes etc. and making connection to switch, BDB and BBC etc. i) 4 core X 16 sqmm

Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. 2.5 sqmm

Earthing with 65 mm dia GI pipe (TATA-Medium)x 3.0 Mts. long and 1 No. 50 mm x 6 mm galvanized (Hot Dip) steel strip (4 Mts. long), 20 mm dia x 125 mm long galvanized bolt, double nuts, double washers including finishing both ends by making holes etc. and S & F 65 mm dia GI pipe (ISI-Medium) protection (3 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level to an average depth of 3.65 Mts, For Soft Soil.

Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. ( 0.35 sqm per pole x 58 + 2.8 sqm per panel x 1)

Painting the vertical end faces of posts, wheel guards or railing or parapet with alternate bands of different colours as directed by the Engineer-in-charge with approved synthetic enamel paint. (0.35 sqm per pole x 58 + 2.8 sqm per panel x 1) (b)Two coats.