Rate Contract of Hospital Items/ Equipments/ Instruments at District Health Institutions in District Shimla

Hospital Bed a) Overall size (Approx): 72” x 36 “ and 60 cms height. b) Tubular Bows (outer pipe) made of 30mm x 18 G CR ERW pipe. c) Top made of rectangular/square frame of 50mm x 30mm and made up of 16 SWG M .S tube. d) Bed top should be of 18 G MS CRCA ribbed perforated sheet. e) Provision for IV attachment system (No bend hook) at the both hea d side of the bed. f) All metallic parts of the bed should be pre-treated to achieve rust free clean surface prior to epoxy powder coating. g) Warranty: 3year

Bed Side Locker a) Overall Size (Approx): 40 (H) x 40 (W) x 80 (H) cms. b) Should have an enclosed locker unit which is provided with 50 mm dia non rusting castors for mobility. c) A stainless Steel tray top with raised borders on 3 sides forming the upper surface. d) Drawer should be fitted with smooth slides. e) Should be provided with shelf space for storage under the Drawer with locked Cabinet at below. Drawer and cabinet should have front door. f) Should have one drawer & one cabinet box with self space in between. g) The body should be made of 20 G MS CRCA sheet. h) All MS parts to be pre-treated and epoxy powder coated. i) All SS to be of 304 Grade and of 16 Gauge. j) Warranty: 3year

Over side table a) Overall size: 112 mm LX 450 mmW 965mm H b) Top Size: 760 mm LX 450 mm W c) Top made from 12 mm MDF with 0.6 mm thick laminate pasted on it. d) Beading on all four side of top. e) Tubular frame work with 50 mm Dia swiveling caster. All without brake k) Warranty: 3year

Patient Examination Table a) Overall approx size: 1800 mm L x 600mm W x 700mm H (L x W x H) b) Two section with two fold Cushion top of 3”mm thickness made of 4 0density PU foam c) Tubular construction, machine pressed double bend mild steel sheet d) Headrest adjusted on ratchet e) Legs fixed with rubber feet. f) Should be provided with foot step. g) Pre-treated and epoxy powder coated h) Patient load bearing capacity of 150 kgs minimum. i) Warranty: 3year

IV Stand a) Overall approx. size: height 150cm-230 cm (with telescopic adjustable height) b) Main Frame: Strong & Sturdy stainless steel tubular construction mounted on four pronged tubular/rectangular base fitted with four swivel rust proof castors 50mm diameter . c) Stainless steel rod with double hooks d) All the Stainless Steel should be 304 grade e) Should be pre-treated and epoxy coated finish. f) Warranty: 3 years

Double Foot Step Stool a) Polished SS tubular legs fitted with high quality nylon gromets. b) SS made top having high grade 3mm nylon matting and aluminum beading c) Overall size: - 460(L)* 500(W)* 460(H) in mm (for Double Foot Step Stool) d) All the Stainless Steel should be seamless conforming to 304 grade/ 16 gauge and polished finished. e) Warranty: 3 years

Dressing Trolley a) Overall approx. Size: 780mmL x 500mmW x 900mmH b) Approximate shelf dimension 750mmL x 500mmW. c) Tubular CRC frame mounted on four castors of minimum 100mm dia and should be pre-treated and epoxy coated finish. d) Two S.S. of 304 grade shelves with protective railings on three sides. e) Should have provision for holding bowel and bucket. f) Warranty: 3year

Instrument Tray a) Made of Stainless Steel of 304 grade b) Size(Approx): 18" X 12" X 2” c) Should be provided with SS lid d) Warranty: 3 years

Instrument trolley a) Its size should be 680mm L x 450mm W x 900mm H (Approx.) b) Stainless steel tubular frame work made of 25mm OD x 18G verticals mounted on 125mm dia on rusting castor two with brakes. c) Castor housing and wheels should be made from high grade non floor staining synthetic materials with integrated thread guards wheel center having precision ball bearing to run smoothly. d) Two stainless steel shelves of 20G thickness, with protective railing on three sides. e) The railing shall be made from dia. 10mm S.S. rod with 304 grade stainless steel. f) Should be used for trolley frame work and SS shelves. SS parts finished with Matt Polish. g) Warranty: 3year

Dressing Trolley a) Overall approx. Size: 780mmL x 500mmW x 900mmH b) Approximate shelf dimension 750mmL x 500mmW. c) Tubular CRC frame mounted on four castors of minimum 100mm dia and should be pre-treated and epoxy coated

Folding Wheel Chairs a) Dimension should be 650mm W x 1120mm D x 920mm H.(Approx.) b) Two solid rubber tyred bicycle wheels with break and self propelling stainless steel hoops c) Two swivel castors, 200mm dia in front. d) Seat and back easily removable and replaceable e) Fine and durable upholstery for seat and back f) Nylon Handgrips and Padded a rm rest g) Should have polished stainless steel construct h) Aluminum leg rest – swing away type i) All the Stainless Steel should be 304 grade j) Warranty: 3year

Folding Stretcher a) Fixed type foldable (width wise fold) stretcher without wheels. b) Foldable stretcher with two light weight poles with handgrips. c) Open size: approximately 200cm L x 55cm W x 15cm H. d) Poles: Two lightweight carrying poles made of non-ferrous metal like heavy duty aluminum Alloy. These to be hollow tube poles with proper non-slip shaped handgrips. e) Stretcher material: Should be heavy duty washable nylon sheet. f) Should have ground clearance of 10cm. g) Should be provided with two inbuilt nylon straps with buckle. h) Carry capacity of minimum 150kg. i) The material shall be turnover edged and then double stitched in nylon thread on all edges. j) Warranty: 3 years

Stretcher trolley a) Should be 2030mm (L) x 560mm (W) x 820mm (H) frame work of ERW tubular welded with vertical upright of 30mm OD x 18G ERW tubes. b) Should be reinforced at bottom with 35mm OD x 18G tube for fitting 200mm dia swivels castors wheels, all w ithout brake. c) All horizontal stays shall be of 25mm OD x 18G tube. d) Stretcher should be made of 18G aluminum painted sheet dished in the middle & supported horizontally on 25mm OD x 14 G tubes. Three additional 31 x 6mm flat supports should be welded to support aluminum sheet top from underneath width wise. e) Pushing handle at both ends shall be made of 25mm x 18G MS ERW tube covered with PVC sleeving. f) Four stump legs of 25mm x 14G ERW tube shall be welded at the bottom of the stretcher frame. g) Should be provided with PVC or synthetic material having Nylon reinforced. h) Warranty: 3year

Electrical Suction Machine a) Should deliver high vacuum of - 90Kpa/-85 Kpa, 675 mm Hg. b) Flow rate range: 35 - 60liters/minute c) Should provide with Piston Cylinder Technology d) Should supply with Membrane Vacuum Regulator e) Should be available autoclavable PSU jars of 3-5 litres (2 no's) and lids with over flow Protection device f) Should supply with Foot Vacuum Regulator g) Should be available safety jar with over flow protection device h) Tubings should be made from silicone i) Should supply with standard rail which is attached in the original company made mobile trolley. j) Mobile trolley should have four castors with brakes and On/Off switch. k) Should have safety certificate from a competent authority CE issued by a notified body registered in European commission / FDA (US) / STQC CB certificate / STQC S certificate or valid detailed electrical and functional safety test report from ERTL. Copy of the certificate / test report shall be produced along with the technical bid. l) Warranty: 3year

Weighing scale adult a) Toughened glass top. b) can be used in bathroom. c) Battery operated. d) Battery power saving by switching off Display while no weight on the scale. e) Large LCD display. f) Capacity-150kg g) PAN size: 300mm dia h) Warranty: 1 year

Weighing scale Pediatric a) Table Top light and portable b) Built in rechargeable battery c) Easy to clean baby tray (acrylic) d) Zero weight adjustment facility e) Quick Clear digital read out f) Measurement does not change with position of baby on the pan g) Provision to measure the height of the baby in its laying position. h) Accuracy: 5g, resolution 1g limit: 10 gm to 15 kg i) Warranty: 1 year

BP Apparatus a) Scale 0-300 mmg. Air release at closed lap with maximum 4 mmHG/Minute Manual setting of deflation possible 2/3 mmHg/Sec. To 15 mm Hg in a maximum deflation of 10 seconds. b) Gauge’s background in which clour. c) Graduate scale for ever / 2 mmgh, every 10 units and every 20 units. d) Nylon straps cuff with pouch, latex bulb with completely chromium plated valve with regulation of vent hold air by screw valve. e) The Rubber tubes used should have an internal diameter of 3 + 0.5 mm and the external diameter should not be less than 160 mm; The dia mano meter with minimum of 160 mm f) Warranty: 1year

Thermometer (Digital) a) Range of temp. measurement 32 C-42 (89.6 F-107.6 F) b) Can be caliberated in both centigrade and Farenheit, but if only one option is available, then celcius is preferable c) Easy to read LCD display d) Buzzer signal function e) Takes 60-90 seconds to measure temp. f) Can be used in the armpit/axilla, orally and rectally g) Accuracy of temperature +-1 C and +- 0.2 F h) Warranty: 1year

Sterilizer i) Should be made of joint-less stainless steel of 304 grade steel of 0.5mm thickness. j) Should have perforated body. k) Should have chain locking with clamp to open or close the perforated body. l) Size should be 11 inch × 9 inch. m) Warranty: 1year

Nebulizer a) Cutter mounted on a frame and fitted with a sharp container b) Material of Cutter Stainless Steel Alloy c) Container shape Round d) Material of Container ABS e) Material of Frame Stainless Steel 304 f) Container type Reusable and Autoclavable g) Container capacity 1.2 Kg. h) Container shall meet requirements of BMW Rules, 2016 as ammended till date i) Container easily removable from the main assembly for discarding of needles and hub j) Manufacturer certifications k) Warranty: 1year

Manual Destroyer For Needles and Syringe Hub a) Cutter mounted on a frame and fitted with a sharp container b) Material of Cutter Stainless Steel Alloy c) Container shape Round d) Material of Container ABS e) Material of Frame Stainless Steel 304 f) Container type Reusable and Autoclavable g) Container capacity 1.2 Kg. h) Container shall meet requirements of BMW Rules, 2016 as ammended till date i) Container easily removable from the main assembly for discarding of needles and hub j) Manufacturer certifications k) Warranty: 1year

Needle Holder 6” size, Ryder

Needle Holder 7” size, Ryder

Needle Holder 8” size, Ryder

Mixter right angle forceps 6”, smooth, pointed tip

Mixter right angle forceps 8”, smooth, pointed tip

Artery Forceps 6”, Kelly, Straight

Artery Forceps 6”, Kelly, curved

Artery Forceps 8”, Kelly, Straight

Artery Forceps 8”, Kelly, curved

Cheatle Forceps 10”, Smooth edges, non corrosive and rust free

Cheatle Forceps 12”, Smooth edges, non corrosive and rust free

De Bakeys Forceps 9” size, non-corrosive, atraumatic, straight

De Bakeys Forceps 9” size, non-corrosive, atraumatic, smoothly curved

Mosquito forceps Curved and straight tip size 6” & 8” stainless steel

Suture Removal Scissor 8” Size

Mayo Scissors 6”, straight

Mayo Scissors 8”, curved

Episiotomy Scissor Standard stainless steel size 6.5-5.5”

Lister Scissor Size 9”

Collin Vaginal Speculum Large (110.0mmX36.0mm) Curvature: Straight. Double blade (duckbill)

Kidney Tray size 8”, Smooth edges, non corrosive and rust free

Kidney Tray 10”, Smooth edges, non corrosive and rust free

Sponge Holder 8”, Smooth edges, non corrosive and rust free

Towel clip Backhause type, Surgical Grade Steel

Proctoscope Pediatric, smooth edges with well fitting obturator, non-corrosive & rust free

Proctoscope Adult, smooth edges with well fitting obturator, non-corrosive & rust free

Otoscope 2.5x magnifying lens,2.54mmX4mm in Diameter,24-lumen with alkaline battery

Laryngoscope Adult

Laryngoscope Pediatric,

Phototherapy unit Pediatric

Bed Pan male ISI/CE or Indian equivalent Standard.

Bed Pan female ISI/CE or Indian equivalent Standard.

Urine Pot male ISI/CE or Indian equivalent Standard.

Urine Pot female ISI/CE or Indian equivalent Standard.

Vulsellum uterine forceps ISI/CE or Indian equivalent Standard.

B.P. Handle (S.S., No. -3) ISI/CE or Indian equivalent Standard.

B.P. Handle (S.S., No. -4) ISI/CE or Indian equivalent Standard.

Allis Forceps ISI/CE or Indian equivalent Standard.

Adson Toothed Forceps

Vas fixation ring forceps ISI/CE or Indian equivalent Standard.

Sharp dissecting forceps ISI/CE or Indian equivalent Standard.

MDT INTERNATIONAL

A S Pharma Private Limited

mahaluxmi medical agencies

PRIME MEDICAL SYSTEMS

Chamunda Scientific and Medical Co

HIMDEV BUSINESS SOLUTIONS PRIVATE LIMITED

Chamunda Scientific and Medical Co

PRIME MEDICAL SYSTEMS

mahaluxmi medical agencies

HIMDEV BUSINESS SOLUTIONS PRIVATE LIMITED

SARLA HEALTH CARE

MDT INTERNATIONAL