Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.4 LAccepted-Finance | L1 | Accepted-Finance 1st Lowest Bidder | |
| 2 | L2₹12.5 L+₹12,030 (0.97%)Rejected-Finance | L2 | Rejected-Finance 2nd Lowest Bidder | |
| 3 | L3₹14.9 L+₹2.4 L (19.7%)Rejected-Finance | L3 | Rejected-Finance 3rd Lowest Bidder | |
| 4 | L4₹20.7 L+₹8.2 L (66.2%)Rejected-Finance | L4 | Rejected-Finance 4th Lowest Bidder |
Tender Value
₹23.1 L
EMD Value
₹23,000
Closing Date
1 Aug 2023, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Superintending Engineer
Electricity Transmission Circle, UPPTCL, 132 KV S/s Mohaddipur Old , Gorakhpur
WORK OF DISMANTLING , SHIFTING OF OLD AND DAMAGED 160 MVA T/F AND ERECTION OF NEW 160 MVA T/F , CENTRIFUSING OF OIL , SUPPLY AND REPLACEMENT OF EMULSIFYRE SYSTEM AND OTHER ASSOCIATED WORK AT 220 KV S/S BARAHUWA UNDER ETD-II , GORAKHPUR
2023_UPTCL_822860_1
Very Short Term E-Tender No. 20-ETC(G)/2023-24
Open Tender
Electrical Works
Item Rate
90 days
Gorakhpur
Please refer Tender documents.
2 documents required · 2 mandatory
₹2,950
SE, ETC, Gorakhpur
₹23,000
4 Aug 2023
20 Jul 2023
2 Aug 2023
20 Jul 2023
1 Aug 2023
20 Jul 2023
Amount
Work of Dismantling and shifting of defective 160 MVA T/F & shifting & erection of 160 MVA Transformer.
Opening of Jumpers , electrical connection and cutting of earthing strip from 160 MVA T/F at 220 KV S/s Barahuwa , Gorakhpur
Dismantling of all water and air pipe Lines of emulsifyre system of 200 MVA T/F its safe shifting to required place at 220 KV S/s Barahuwa, Gorakhpur
Dismantling & Re-erection of following equipments along with structure (if required) by opening of nut & Bolt , Opening of Jumpers also removal of earthing and safe shifting of equipments with all parts and all other associated work.
245 KV CT (with Junction Box ) with complete wiring from C&R Panel and Junction Box.
Dismantling of defective 160 MVA T/F and Accessories removing the radiator , Conservator Tank , A Frame , Header , Bushing , Pipe line and Pump Cooling Fan and all other accessories etc. and drain out of oil up to required level into empty oil drums and cover by bushing blanking plate (Provided by Contractor) at 220 KV S/s Barahuwa , Gorakhpur .
Shifting of 160 MVA T/F main tank from plinth to near 20 Meters .
Additional Shifting 300 Mtrs. @ 5 Mtr. / Job
Shifting and Placement of all dismantled accessories as radiator , conservator tank and other accessories to store / open switchyard and proper stacking . (As per instruction of Supervisor).
Shifting of 160 MVA T/F main tank from unloading place to existing Transformer plinth by dragging distance about 20 Meters .
Additional Shifting 100 Mtrs. @ 5 Mtr. / Job
Providing of Dry Air at the time opening of blanking plate for erection of 160 MVA T/F main tank and filling of Dry Air of dew point -400 C or better for completion of work. The work shall including connecting pipe as required measuring dew point valued of Dry Air.
Filling the T/F oil in oil tank and its centrifusing up to required BDV and creating the vacuum inside the 160 MVA T/F before filling the T/F oil inside the main tank.
Complete Erection of 160 MVA T/F and accessories of HV/LV/TV side bushing , radiator and conservator tank , Frame , Header , Pipe Line , Pump , Cooling Fan etc. and top up required level.
Complete Evacuation of 160 MVA T/F main tank and filling of dry Air / N2 of dew point - 400C or better in vacuum up to pressure of 0.25 Kg / Cm2 and the again evacuating the T/F tank after required time iterval ( approx. 12/24 Hrs.) using centrifusing machine. The work shall including connecting pipe of machine as required measuring dew point values of Dry Air after every cycle till the required value is achieved.
Centrifusing of complete T/F oil in T/F by connecting centrifusing pipes circulating the T/F oil through Centrifusing machine and taking the BDV value of the oil peridically till the required value is achieved as per direction of supervising Engineer , the work includes all the work related to centrifusing the oil and filling the oil in T/F and Tank. Oil Approx. 50 KL (Operator and Centrifusing machine shall be arranged by the Contractor)
Laying , Dressing , Binding of cable including fixing of cable tray support structure and termination of cable marking the top and its ferruling as per schedule and interconnecting including shifting of old cable as per requirement of RTCC panel , marshalling box, driving mechanism etc. and replacement of cable from control room to marshalling box as per instruction of Supervisor.
Earthing of T/F body , MB D.M. Box, OLTC , RTCC at 2 points using 75x10 / 50x6 mm MS Flat for 40 mm MS rod to be provided by the department free of cost.
Painting of earthing strip above the ground level by one of red oxide and two coat of Bus Green Paint.
Preparing and fitting of ACSR Moose / Zebra Conductor jumpers of 220 KV and 132 KV side cutting of conductor and fixing of equipments (Approx. 12 Nos. Jumpers).
Shifting of 20 KL empty oil tank for the centrifusing of T/F oil from open store to near T/F plinth.
Special Delta Earthing for 160 MVA T/F consisting of fabrication of delta set with 3 Nos. 40 mm / 36mm dia size 6 Mtrs. Long electrodes its placing inside the ground and connecting all the three electrodes with 75x10 mm MS Flat 700 mm deep and connecting the same with earthmat at 2 places (MS Flat & MS Rod provided by the department).
Carriage of oil tanker 40/20 KL including loading, unloading and carriage approx. distance 150 Km.
Packing of HV, T/F bushing of dismantled 160 MVA T/F ( wooden box will be provided by the contractor) and its shifting up to proper storage place.
Packing of LV, T/F bushing of dismantled 160 MVA T/F ( wooden box will be provided by the contractor) and its shifting up to proper storage place.
Conducting oil test of oil sample by arranging appropriate equipments for following testing by NABL Lab (BDV/PPM/DGA etc.) as per instruction of Supervisor and also assistance in the T/F testing , main tank R,Y,B phase OLTC sample.
Conducting testing of appropriate equipments for following testing of 220/132 KV 160 MVA Power Transformer at 220 KV S/s Barahuwa, Gorakhpur .
A) Insulation resistance measurement B) Polorisation Index. C) Magnetizing Current D) Magnetic Balance E) Vector Group Test F) Voltage Ratio Test G) Winding resistance measurement H) Tan Delta and capacitance measurement I) Sweep Frequency response analysis. .
NOTE : NOC has been taken by contractor from electrical safety department and it will reimbursed on actual amount after submitting challan copy with bill to department.
For installation of emulsifyre for replacement of 160 MVA T/F at 220 KV S/s Barahuwa, Gorakhpur
Supply and laying upper ground as required of different size MI pipe "B" Class Jindal / Tata make for fire direction water pipe line support as per IS Specification (IS Code: 1239) as per drawing enclosed complete with elbow , tee, socket , reduce , nut and bolts with details as below with anticorrosive treatment or painting as where required along with fabrication and fixing of L & U shape support with associated work to complete the job in all respect.
Supply and installation of 80 NB MS Pipe B Class Jindal / Tata make for making support running of water /air pipe line including providing flanges on bottom and its proper grouting with fastener as where required.
Supply and installation of Flanges as per IS 1538 of different size as per drawing work include proper butt welding with pipe & proper packing and coupling with nut & bolts and fastener as required.
Supply and installation & Commissioning of high velocity water spray nozzles flow capacity 305 Kg / cm 2 spray angle 9.
Supply and installation & Commissioning of Quartizite bulb detectors (QBD) operator as 76 C0 sensing at rated temperature for actuation of the element 10/12 sec.
Supply & installation & Commissioning of gate valve as per technical specification (IS code 14846) 150 NB
Supply & installation & Commissioning of fixed different switch (Denfoss/ Indofass make) type pressure switch range 1-10 Kg. / cm2.
Pressure Gauge as per IS Specification IS Code 3624 accuracy +- 5%
Dismantling & Installation including repairing of deluge valve by replacement of gaskets and repairing of alarm electrical connection of pressure switch including of control cable etc.
Laying upper ground as required of 150 NB old & use including modification as required MS Pipe B Class provided by deptt. For fire water pipe line support as per IS specification (IS Code 1239) as per drawing enclosed complete with elbow , tee, socket , reduce nut & bolts (Provided by deptt.) with detail as below with anticorrosive terminate or painting as where required along with fabrication & fixing of L&U shape support with associated work to complete the job in all respect 150 NB.
Supply and laying of upper ground of different size old & used including modification as required GI Pipe B Class (Provided by the deptt. ) for fire detection with anticorrosive terminate or painting as where required along with fabrication & fixing of L&U shape support with associated work to complete the job in all respect 65 NB.
Re-installation of old & used including modification as required of MS pipe B Class (provided by Deptt.) by for making support running of water air / pipe line including providing flange on bottom and its proper grouting with fastener nut , bolt with anticorrosive treatment or painting as where required A) 25 mm dia B) 50 mm dia C) 65 mm dia D) 80 mm dia
Re-installation and commissioning of old & used high velocity water spray nozzles flow capacity 3.5 Kg / cm2 spray core angle 90 ( provided by Deptt.)
Re-installation and commissioning of old & used Quartzite bulb detectors (QBD) operate at 760 C sensing at rated temp for actuation of the element 10/12 Sec. (Provided by Deptt.)
Re-installation and commissioning of 150 NB Deluge Valve as per requirement of Transformer which includes servicing of related fittings like 150 NB T-Strainer - 2 Nos. Gate Valve another related parts of deluge valve.
R.K.ENGINEERING SERVICES
TAJ ENTERPRISES
M/S DHIRENDRA SINGH
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .