CERTAIN B/R REPAIR/ MAINT WORKS, PERIODICAL SERVICES, GRIT PLASTERING, CHAJJA/ SUN SHED/ ROOF REPAIRS, CURB STONE/ ROAD/ PATH PAINTING TO MD / OTM ACCN AT MALL ROAD/ POLO ROAD/ PARADE ROAD/ CHURCH ROAD AND OTHER MISC AREAS/ CENTRAL AMMENITIES IN THE

Amount

Taking down cement or cement lime plaster , any description on brick or stone walls or concrete surfaces etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M & L 15mm thick rendering in cement mortar 1:4 on fair face of brick walls/ concrete surfaces and finished even and fair incl scafolding etc, complete all as specified and as directed.

M & L 15mm thick rendering in cement mortar 1:6 on fair face of brick walls/ concrete surfaces & finished even and fair incl scafolding etc, complete all as specified.

M & L rendering 10 mm thick on concrete surfaces as in ceiling in CM 1:3, finished even and fair incl scafolding etc, complete all as specified and as directed.

M & L for Brick work with sub class 'B' bricks of old size, straight or curved on plan to any radious built in CM 1:6 including demolition of Brickwork built in cement mortar including all quioins, arches, pillars etc complete all as specified.

M & L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern (groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove) complete including scrubbing and washing, the top layer with brushes and water to expose the stone chippings including taking down cement or cement lime plaster , any description on brick or stone walls or concrete surfaces etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

S & F in repair precast cement concrete type B0 1:2:4 (12.5 mm graded aggregates) louvres and jallies, 45mm thick set in CM (1:4) (measured solid), including all mouldings but excluding frame (Pre cast frame shall be measured and paid seperately) including demolition of existing RCC Jallies complete all as specified and directed.

S & F precast RCC coping/post of size 600x100x50 mm suitable for fixing of RCC Jallies in vertically & horizontally including necessary moulds and grooves as required in shape and size complete all as specified and directed.

M & L for Vitrified coloured tiles dark shade 8-10mm thick (square/rectangular) polished, area of each tile exc 0.42 sqm but n exc 1.00 sqm each in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6, with dismantling floor, hearth or wall tiling with cement mortar bedding (but not backing), complete all as specified and as directed.

M & L for glazed ceramic tiles in vertical surface 300x600x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 10mm thick screed bed in CM 1:4 including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and as directed.

M & L for Non-Skid coloured ceramic tiles 7-8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in CM 1:6,including cement mortar bedding (but not backing), complete all as specified and as directed.

M & L 20-22 mm thick granite (Type, Size and colour as approved by GE and as per site requirement) of any type work table rubbed and polished as in steps, jambs, pillars, window cills, cooking platforms and like in over and incl 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab , notching, moulding and polishing with dismantling of old granite of any type including cement mortar bedding (but not backing), complete all as specified and as directed .

S&F 18mm thick "RAJSHRI" Brand factory made WPC railing combining WPC board/Fancy designer type grating and WPC frame 100% solid WPC (wood polymer composite) railing of required length and of 2' to 2.5' height , comprising of virgin PVC resin of K value 58-60 (Suspension Grade) , Calcium Carbonate and natural fibres (Wood Powders/rice husk//wheat husk) and non toxic additives, made from single extrusion process, WPC foam board with having minimum density 650kg/cbm and WPC frame having minimum density 780kg/cbm manufactured by "RAJSHRI" an ISO 9001-2015 certified Company, having good screw holding capacity (screw withdrawal strength of 2000N (Face) & 1100N (Edge) , Minimum comprising of 50N/mm2, Modules of elasticity 850N/mm2 and resistance of speed of flame of class A category with property of being termite/Borer free water /Moisture proof and fire resistance. For WPC railing WPC jali to be fixed with WPC frame of size 75x50mm with necessary supporting lengths at vertical as well as horizontal at wall frames to be fixed with 3"x3" GI 'L' or SS cleats to support vertical frame lengths including dismantling of existing RCC jallies with frames complete all as specified and as directed. (Make : Rajshree or equivalent as approved by GE) (Note : The said item shall be fixed over boundary walls/roof tops and in any other positions as per requirement at site)

M & L for preparation of new plaster external wall and ceiling surfaces of and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and as directed.

M & L for Preparation of newly plastered /unplastered surfaces of walls and ceilings and applying Two coats of Oil Bound Distemper on wall surfaces over a coat of primer ,complete all as specified and directed.

M & L for preparation of plastered or unplastered old decorated surfaces of walls including brooming down or scraping down with steel wire brushes of smoke spots , moulds ,moss efflocerent salts and treading oil and greasy spots, filling the cracks, holes with POP/Putty and applying One coat of Oil bound distemper complete all as specified and directed.

M & L for preparation of plastered or unplastered old decorated surfaces of walls including brooming down or scraping down with steel wire brushes of smoke spots , moulds ,moss efflocerent salts and treading oil and greasy spots, filling the cracks, holes with POP/Putty and applying One coat of Cement Based Paint complete all as specified and directed.

M & L for preparation of plastered, unplastered or pointing surfaces old decorated/un-decorated surfaces of walls including brooming down or scraping down with steel wire brushes of smoke spots , moulds ,moss efflocerent salts and treading oil and greasy spots, filling the cracks, holes with POP/Putty and applying One coat of exterior acrylic emulsion paint (as per list of makes) of any tint all as per manufacturers instructions to achive desired finish at any height complete all as directed.

M & L for One Coat of Synthetic Enamal Paint on wooden surfaces including prepration of Old surface of any description over 10cm in width or girth complete all as specified and as directed.

M & L for One Coat of Synthetic Enamal Paint on steel surfaces (such as door/window/grill/GI roof top including prepration of Old steel surface of any description, over 10cm in width or girth complete all as specified and as directed.

M & L for preparation of black top surfaces of road by cleaning with air blower and applying 1.5mm thick road marking strips, dahses, arrows letters etc 10cm wide or more (retro-reflective) of white or golden yellow shade/colour using hot thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and driven by experienced operator on road surface including cleaning all loose dirt, seals, oil greases and foreign materials etc complete all as directed. (Make : Asian Paints/APCO or equivalent).

M & L for applying two coats of synthetic enamel paint, any tint on new brick, kerb stone, concrete, asbestos cement or plastered surface exceeding 10cm width or girth including preparation of new surfaces and including 2-3mm wall care putty over a coat of primer complete all as specified and as directed.

M & L for preparation of old existing pathway/road/hardstanding areas duly brooming/scraping down to remove all loose dirt including removing the vegetable/glass over it further applying evenly one coat of road marking thinable paint (bituminous) of any colour (bituminous thinable paint mixed with water at the ratio of 1:20) as directed and approved by Engr-in-Charge complete all as specified and as directed.

S & F in repairs Galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width of aperature 1.4mm and fixed to doors and widows with necessary 12mm iron flats with welding and including dismantling of old wire cloth complete all as specified and directed. (Rates are inclusive of welding and supply of flats including reqd nutbolts wherever required)

S & F 3mm thick sheet glass, ordinary quality and glazing with wooden beading not exc 0.5 Sqm in each pane all as specified and directed including hacking out old broken glass (any thickness, size, quality or description) from wooden or steel frame glazed with putty or fixed with beads.

S & F GI tubing 15mm bore medium grade, galvanised, ISI marked with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down GI tubing 15mm bore and connections complete all as specified and directed.

S & F GI tubing 20mm bore medium grade, galvanised, ISI marked with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down GI tubing 15mm bore and connections complete all as specified and directed.

S & F Rotational moulded polyethylene water storage tanks 1000 lts capacity, tripple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete.

S & F Rotational moulded polyethylene water storage tanks 2000 lts capacity, tripple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete.

S & F in repairs 20mm bore Gun-metal, globe or gate valves, with iron wheel head screwed for iron pipe of 20 mm bore complete all as specified and directed.

M&L Machine cut kota stone slab flooring 18-20mm thick over and including 10mm thick cement plaster in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floor or in any position and paving not exc. 15 cm thick (below or above ground level) complete all as specified and as directed.

M & L for 75mm thick Cement concrete 1:4:8 Type D-2 (using 40mm graded agg) as in sub base of flooring or in any position complete all as specified and as directed.

M & L for Coloured Machine pressed precast concrete interlocking paver block of any shape and size (Two colour combination) conforming to IS 15658-2006 of 60 mm thick, M-40 Grade with grey cement and pigment laid dry in floor/path complete including dismantling of existing interlocking tiles of any type all as specified and as directed.

M & L for Coloured Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and no pigment over 15mm thick screed bed in CM 1:6 complete after dismantling of existing chequired tiles of any type all as specieied and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S & F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 after dismantling of existing steel work of any type complete.

S & F for Stainless Steel work of Grade-304 as in Gates, grills, posts (horizontal/vertical) or any type of other work or in any position, of any type and size including special shaped washers, channels, plates horizontal/ vertical made of hollow tubes or in any other shape as per requirement at site complete all as specified and as directed.

S & F painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of Plain or corrugated AC Sheet, including Nainital or similar pattern roof coverings complete all as specified and as directed.

S & F painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of Plain or corrugated AC Sheet, including Nainital or similar pattern roof coverings complete all as specified and as directed.

M/s Sree Baba Traders (BID ID -3168330)

A R construction (BID ID -3162487)

sunil traders (BID ID -3162598)

Vipul Construction (BID ID -3162573)

garnet engineers contractors (BID ID -3162461)

M/s Shubh Enterprises (BID ID -3162746)

K S CONSTRUCTIONS (BID ID -3168878)

tarun construction co (BID ID -3161480)