80 villages of F.P.Jhirka A...

Amount

supply, eraction, testing and commissioning of complete set of 400mm i/d D/F M.S pipe sluice valve,NRV,scour valve of IVCI kirlosker make and chamber,pipe should be flanged jointed with nuts and bolt sand rubber packing etc. for individual delevery and interconnection of above 4 pumps in common header complete in all respects

supply, eraction, testing and commissioning of pressure gauge in the the delivery of each pump and one in common feeder with all fitting complete in all respects

Electronic water [evel indicator digital type including cost of connectinq material complete in all respects

Supply, erection, testing and commissioning of Lightingfixtures and poles for inter lighting and fixing arrangement and recessed conduits cables and recessed. Based along with piano type switch, plug point etc., complete in all respects including trench with pipe (M.S. pole 11 M Height with 100 W LED light (Phillips/HA Veel ls/Bajaj/C r.om pton _!ra!9) com lete.

Providing and casting in situ reinforced cement concrete (1:1:5:3) (1 cement, 1.5 coarse sand 3 stone aggregate) 20-25mm nominal size bottom plugcomplete of concrete for bottom plug with cement concrete (1:1:5:3) with 10% excess cement to be laid under still water so that it should be completely water tight when water is pumped out of the well after 15 days

Sinking in fine or coarse sand stone C pebbles, kankar, sand stone gravel clay or mixture of them spreading the same around the well with in a bad of 100 meters 0-5 meter depth

Sinking in fine or coarse sand stone C pebbles, kankar, sand stone gravel clay or mixture of them spreading the same around the well with in a bad of 100 meters 5-10 Meter depth

Sinking in fine or coarse sand stone C pebbles, kankar, sand stone gravel clay or mixture of them spreading the same around the well with in a bad of 100 meters 10-15 Meter depth

Sinking in fine or coarse sand stone C pebbles, kankar, sand stone gravel clay or mixture of them spreading the same around the well with in a bad of 100 meters 15-20 Meter depth

Sinking in fine or coarse sand stone C pebbles, kankar, sand stone gravel clay or mixture of them spreading the same around the well with in a bad of 100 meters 20-25 Meter depth

Sinking in fine or coarse sand stone C pebbles, kankar, sand stone gravel clay or mixture of them spreading the same around the well with in a bad of 100 meters 25-30 Meter Depth

Sinking in fine or coarse sand stone C pebbles, kankar, sand stone gravel clay or mixture of them spreading the same around the well with in a bad of 100 meters 30-35 meter depth

Providing and fixing wooden pattern of porthole in the well steining at G.L. as per drawing at the height of 1.0m above curb and 2.5 m height with fixing vertical circular timer 75mm thick at the end at Ground well before fixing C.I. port holes

Febrication of most accurately M.S pipe made out of MS V type stirrups 300mm i/d ,316mm o/dx120mm long with tapered slots of width 3mm and 6mm on outer peripheri including cost of coat of paint,the pipe shall have an effective opening area of 16% (min) strong enough to with stand load of 100 tonnes without buckling complete

Providing and welding non return sand valve in position in the first slotted pipe to be derived in the strata

supplying and fitting of 350mm dia sluice valves of reputed make with the consent of Engineer-in-charge of the work.at the well end of the port holed including hand wheel connecting roads with galvenized bolts,nuh,washerd and rubber packing etc. complete job

Fixing of dummy plate of size 400mm dia 10mm thick under water with the help of diver after the completion of driving of laterals

Driving slotted pipe radially and horizontally in three layers without rising towards the surface through portholes in any strata and length. Welding each pipe of 1.2m. If no electricity is available the alternate arrangement will be Made by the contractor on his own cost as per direction/instructions of the Engineer -_ in -_ charge

Providing fabrication, fixing, welding M.S. section such as joints, channel, angles plates etc. for pump house floor supporting clamps and electrical motor stool i/c two coats of red oxide or approved point

Fabricating, providing and setting out steel curt with steel cutting edge of collector well including placing in position

Providing earth/ sand back fill compacted including laying earth as per specification for compaction in 25cm layers, dressing, watering and rolling the earth laid in 25cm layers as per Specification for compaction complete in all respects. a.for R/well b.FOR APPROACH PATH C.FOR RASTA

Supply and placing in position coarse Yamuna sand to be filled under road cuts and around thrust block of M.S. specials as per direction/instructions of the Engineer -_ in -_ charge.

Breaking of wooden pattern of port holes inside the well after plugging to proper horizontal alignment for fixing of C.I. port holes of required size

Providing, leveling, fixing with grouting 1:2 mix (1 cement, 2 coarse sand) cast iron port holes with rubber lining 20mm thick properly fixed with adhesive 10 as to have complete leak proof system or as per direction of the Engineer-in-charge of work

Supply and fixing of cast steel bullet head with M.S Tapered rods to CI Bullets head and welded to slotted pipes, or as per direction of Engineer In Charge

Supply, erection, testing and commissioning of vertical turbine,wet pit and water lubricated type with under ground discharge elbow clear water pump with suitable coupling complete in all respects having the following capacities. The pump stool to be compatible with the motor. The pump should be provided with ratchet, so that shaft cannot rotate in reverse direction: 168 cum/hr. 35m head

Supply, erection, testing and commissioning of squirrel cage induction motor SPDP vertical hollow shaft suitable to operate on 415 plus 6 % - 15 % of 650 c/s frequency 3 phase AC supply to operate the above pump of following capacities for 168 cum/hr. at 35 metre to match with the stool provided with the pump (40 HP/30 KW)

Supply, erection, testing and commissioningLT switch gear control panel at clear water pumping station including of main incoming ACB from transformer, individual switch asfor pumps motors, starters etc. complete with all instruments required for incoming or outgoing feeders. (Panel board for 4 Nos. motors) with Flat and boost charging battery charger of 80 AH capacity 30 VDC with battery, leads complete and other accessories for battery and charger with gauge complete in all respects as perspecification

Supply, erection, testing and commissioning of complete set of 400mm i/d D/F M.S. pipe, sluice valve, NRV, scour valve of IVC/ Kirlosker make and chambers, pipe should be flanged jointed with nuts and bolts and rubber packing etc. for individual delivery and interconnection of above pumps in common header complete in all respects as per Annexure - I.

Supply, erection, testing and commissioning of Electro magnetic type flow meter suitable to measuring discharge 8 - 20 MLD including cost of flanged required for fixing with 400mm i/d rising main complete in all respects as per approved make

Supply, erection, testing and commissioning of pressure gauge in the delivery of each pump and one in common feeder with all fittings complete in all respects

Electronic water level indicator digital type including cost of connectiong material complete in all respects.

Supply, erection, testing and commissioning of armoured power cable, with earthing complete suitable for 4 Nos.pumping plant complete in all respects and cable from the outgoing feeder MCC to transformer. (as per annexure – II)

Supply, erection, testing and commissioning of 5 tons capacity Hand Operated Travelling crane consist of single bridge girder of spen 7.0 Mtr. with chian pully block and trolly to suit the pump house complete in all respects including side girder with square bar etc. complete in all respects .

Supply, erection, testing and commissioning of Lighting fixtures and poles for inter lighting and fixing arrangement and recessed conduits cables and recessed. Based along with piano type switch, plug point etc., complete in all respects including trench with pipe (M.S. pole 11 M Height with 100 W LED light Phillips HAVeells /Bajaj/Crompton make)complete .

Supplying all material, labour and TandP with installation and commissioning of Pressure Transmitter-10 bar,2 wire 24 volt DC including Snuber,needle valve, SS-316 tubing from PT to PLC Panel in the delivery header of pump set including all cost, taxes and transportation etc all complete as per direction of Engineer-in-charge. Ranney Well

Supplying all material, labour, T and P installation and commissioning of Rader Based 24 based Level Transmitter,24 volt DC,Output 4 to 20 MAP 0-30m at Ranney well including all cost, taxes and transportation etc all complete as per direction of Engineer-in-charge.

Supplying all material, labour, T and P installation and commissioning of Rader Based 24 based Level Transmitter,24 volt DC,Output 4 to 20 MAP 0-30m at Ranney well including all cost, taxes and transportation etc all complete as per direction of Engineer-in-charge.

Supplying all material, labour, T and P installation and commissioning with all accessories of valves including nuts,bolts etc with actuator to multi-Turn 3ph, 415V AC Actuator operated valve for remote control including all cost, taxes and transportation etc all complete as per direction of Engineer-in-charge. Ranney well Pump House, 400 mm dia gate valve of rising sppindle with gear box with MOV

Engineering Server Station with 21 inch Moniotor

Operator Station PC with 21inch Monitor

Printer - A3 Colourjet

Control Desk

Operator Chairs

Ethernet Switches

Supplying all material, labour, T and P for Power and Control Cable including all cost, taxes and transportation etc all complete as per direction of Engineer-in-charge Copper Armoured cables 1 Pair x 1.00 sqmm

Supplying all material, labour, T and P for Power and Control Cable including all cost, taxes and transportation etc all complete as per direction of Engineer-in-charge Copper Armoured cables 12 Core x 1.5 sqmm

Supplying all material, labour, T and P for Power and Control Cable including all cost, taxes and transportation etc all complete as per direction of Engineer-in-charge Copper Armoured cables 24 Pair x 2.5 sqmm

Supplying all material, labour, T and P for Power and Control Cable including all cost, taxes and transportation etc all complete as per direction of Engineer-in-charge Copper Armoured 3 Core x 1.5 sqmm

Supplying all material, labour, T and P for Power and Control Cable including all cost, taxes and transportation etc all complete as per direction of Engineer-in-charge Copper Armoure 3 Core x 4 sqmm

Supplying all material, labour, T and P for Power and Control Cable including all cost, taxes and transportation etc all complete as per direction of Engineer-in-charge Earthing Cable 1 Core x 6 sqmm

Supplying all material, labour, T and P for Cable Laying accessories including all cost, taxes and transportation etc all complete as per direction of Engineer-in-charge CABLE TRAY

Junction BOX with fuse TB

Local Control Panel for motor and Pumps (With On,off,Emergency stop and key)

Earth pits with all accessories in normal soil

Cable Post and bracket

Supplying of All materials labour, TandP installation and Commissioning for industrial grade laptop for confrugation of PLC and Programme of intake well and WTP etc complete.

Main PLC Panel with CPU and Power Supply (DI-100, DO 60,AI-24,AO-12,MODBUS-74) with 10` HMI Make : ABB/SCHENIDER/ Siemens/ Rockwell

Supply,Installation and Commissioning of SCADA software (Make- ABB/ SCHENIDER/ Siemens/ Rockwell) with Graphical processor visualisation Advanced alaram management,historical and Real time trending,Built in reporting,Stastical process control,Multithreaded citect VBA and Cicode programming language with 2048 Tag SCADA Software (ES plus OS) (Make : ABB/ SCHENIDER/ Siemens/Rockwell),1KVa online Ups with 30Min batery backup 1Nos,CPU Having Preloaded win-10 Proffessional, I3-10gen 2.4 Ghz Prrocessor, DDR4 8gb Ram, 500 gb 7200 Rpm HDD-1 Nos ( Make- HP,DELL,LENOVO),USB based keyboard -1Nos,USB based Optical Mouse- 1Nos,43`` LED monitor -1Nos,A4 size laserPrinter - 1Nos,Wooden Computer table - 1Nos ,Preparation of PandI diagram, Creation of Multi visualization screen for Process control,alarm managenent,Historical and realtime process trend, Daily reporting etc complete as per requirement and direction of Engineer - in -Charge (Including license key

Procurement of land for installing Ranney Well at the feasible site For 1 Ranney wells = 1.00 Acre plus 0.25 Acre for Raasta=1.25 Acre per Ranney Well

Providing and casting in situ reinforced cement concrete of grade M30 as per design mix approved by Engineer in-charge with minimum cement content not less than 410 Kg/M3 for collector well curb in it, well steining including supplying and fixing of clamps of size directed by the department. The well steining for column pipe and spindles and extension rods etc. with centering, shuttering vibrating, curing etc. complete upto bottom size brackets complete in all respects...

Providing and casting in situ reinforced cement concrete of grade M30 as per design mix approved by Engineer-in-charge with minimum cement content not less than 400 Kg/M3 for complete in all respects. a. 6 cantilevers projecting 2m from steaning and portion of shaft b/w steaning beam b. Pump house floor 150mm thick c. floor and roof ring beam d. valve operating floor e. conical roof f. clo. for pump house g. crane gantries and supporting brackets etc, complete as per dnit drawing and sprcification..

Operation and Maintenance of water works for complete scope of work mentioned in the DNIT and of whole existing water supply scheme in the village Disin fection material supplied by the PHED as per schedule-IV for a period of 5 years after 12 months during defect liability period and 3 months trial run period. (will be charged to the A/mtc estimate). complete in all respects as per approved NIT. 1) Operation and maintenance during defect liability period after 3 month trial run period( operation only)

1st year Operation and maintenance after defect liability period

2nd year Operation and maintenance

3rd year Operation and maintenance

4th year Operation and maintenance

5th year Operation and maintenance

Bidder Name

Amount

ADVANCED INFRATECH PVT. LTD.(GSTN-06AAHCA6437B1Z0)

M/s KNK Projects Pvt Ltd (Formerly Known as M/s Kedar Nath Khandelwal)(GSTN-NA)

ADVANCED INFRATECH PVT. LTD.

ADVANCED INFRATECH PVT. LTD.