Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.7 LAccepted-AOC 206 SILVER MIST NEAR NEELAYAM THEATER SADASHIV PETH PUNE 411030 | PUNE | PUNE | MAHARASHTRA | 411030 | L1 | Accepted-AOC L1 bidder | |
| 2 | L2₹1.1 Cr+₹22.8 L (26.1%)Rejected-Finance H 1 50 BUDH VIHAR PHASE 1 NEAR RADHIKA MANDIR NORTH WEST DELHI DELHI 110086 | NORTH WEST DELHI | DELHI | 110086 | L2 | Rejected-Finance Higher bidder | |
| 3 | L3₹1.2 Cr+₹29.1 L (33.3%)Rejected-Finance | L3 | Rejected-Finance Higher bidder | |
| 4 | Rejected-Technical | - | Rejected-Technical as attached |
| Sl No | Description | Qty | Unit | SUVARN INTERIORS AND ENGINEERS | V & D FAB | DURLAX TOP SURFACE LIMITED |
|---|---|---|---|---|---|---|
| 1.00Fabrication and supply of Exhibits structure including flooring etc | ||||||
| 1.01 | Flooring Works, Supply and installation of high-performance, seamless polyurethane (PU) poured flooring, with a minimum thickness of 3mm, suitable for heavy-duty, gallery-grade application in high-footfall exhibition spaces. The flooring system shall be monolithic and jointless, offering superior resistance to abrasion, impact, and chemical exposure. The material must be anti-slip, fire-retardant (conforming to IS 3808 or equivalent), and UV-stable to prevent discoloration over time. It should have a matte finish and be available in neutral color tones such as white, grey, or beige, finalized in consultation with the Officer-in-Charge. The surface must be easy to clean, stain-resistant, and exhibit antibacterial or antimicrobial properties. Recommended and approved Indian market brands include Sika, Fosroc, BASF (MasterTop systems), Asian Paints SmartCare PU Flooring, and Tremco India, or other equivalent ISI/CE-certified systems | 4,200 | Sq. Ft | 6,30,000 ₹6,31,134 Lowest | 14,70,000 ₹17,34,600 | 6,72,000 ₹6,72,000 |
| 1.02 | Wall Painting Works, Surface preparation including minor crack repairs, putty work (where required), sanding, dust removal, application of approved primer, and two or more coats of premium-quality emulsion paint on designated wall areas. Paint must be washable, low-VOC, matte or eggshell finish, suitable for gallery use under high illumination. Approved brands are Asian Paints Royale, Nerolac Impressions, or equivalent ISI-certified paints. Final paint color and texture (smooth, mild texture, or designer finish) to be finalized by the Officer in Charge. Uniform finish, free from brush marks, lap marks, and color variations, must be achieved. | 5,040 | Sq. Ft | 1,51,200 ₹1,51,472.16 | 3,52,800 ₹4,16,304 | 1,51,200 ₹1,51,200 Lowest |
| 1.03 | Fabrication & Installation of Straight Wooden Partitions Fabrication and installation of straight modular partition walls 8 feet in height, constructed using naturally seasoned straight, knotfree, CP teak wood frame of cross-section 2” x 1” (50mm x 25mm nominal) arranged in a grid pattern of 2’ x 2’. One side of the frame to be covered with 12mm thick BWP-grade plywood (conforming to IS 710 standards). Exterior surfaces to be finished with 1.0mm thick premium decorative laminate (Greenlam, Centruy, AICA Sunmica, Merino, or equivalent) in matte finish as approved by the officer incharge. Partition system must be designed to structurally support lightweight exhibition graphics, TV, Monitor, Light Fixtures, etc. and exhibits up to 15kg per mounting point. Includes full internal framework bracing, concealed base supports, edge banding, and finishing of all visible laminate surfaces to achieve a uniform and professional gallery-grade appearance. | 3,000 | Sq. Ft | 9,90,000 ₹9,91,782 Lowest | 8,70,000 ₹10,26,600 | 18,00,000 ₹18,00,000 |
| 1.04 | Fabrication & Installation of Curved Wooden Partitions Fabrication and installation of curved modular partition walls 8ft in height, constructed using naturally seasoned, straight, knot free, CP teak wood frame of cross-section 2” x 1” (50mm x 25mm nominal) for verticle memeber and use 50mm width x 25mm thick plywood for making curved horizontal memebers with a grid of 450mm x 450mm arranged appropriately to follow the curve, with internal grid adapted to structural needs. Frame to be covered on both sides with 6mm thick bendable plywood (BWP grade conforming to IS 710) for smooth curvature. One surface to be finished with 1.0mm thick premium flexible decorative laminate (Greenlam, Century, AICA Sunmica, Merino, or equivalent) in matte finish as approved by the Officer incharge. Partition must be designed to structurally support lightweight exhibition graphics, TV, Monitor, Light Fixtures, etc. and light exhibits up to 10kg per mounting point. | 400 | Sq. Ft | 1,44,000 ₹1,44,259.2 Lowest | 1,66,000 ₹1,95,880 | 2,60,000 ₹2,60,000 |
| 1.05 | Supply & Pasting of Printed Vinyl on Wooden Partitions, Supply, printing, and professional pasting of high-quality laminated vinyl graphics on all finished wooden partitions (straight and curved) with a total surface area as per site measurements. Vinyl material to be 100–120 micron thickness, polymeric grade with gray adhesive backing for opacity (3M, Avery Dimension, Technova or equivalent with at least 5 year warranty). Printing must ensure accurate color reproduction, matching the approved design files provided by the officer incharge, using eco-solvent or latex printing technology. Vinyl finish (matte or satin) to be selected by the officer incharge prior to production | 3,400 | Sq. Ft | 5,44,000 ₹5,44,979.2 | 5,10,000 ₹6,01,800 | 5,10,000 ₹5,10,000 Lowest |
| 1.06 | Supply and installation of Acrylic cut letters and singages. Supply, fabrication, and installation of 10mm thick solid acrylic and solid surface (Corean) cut letters in various fonts, sizes (ranging from 30mm to 300mm), and colors as specified by the officer incharge. The acrylic material used must be cast acrylic sheet (not extruded) to ensure superior clarity, strength, and resistance to yellowing or fading. The letters will be precisely cut using CNC laser cutting technology to achieve smooth, clean edges with minimal tolerance. The work includes cutting to the required profiles, finishing of edges, provision of all necessary adhesives and fixings, and professional installation on designated surfaces within the gallery. The quoted rate must account for any variations in font style, size, and the selection of 5 different acrylic colors. The payable area for the acrylic letters will be based on the area of the minimum rectangular box enclosing each letter. | 300 | Sq. Ft | 2,19,000 ₹2,19,394.2 Lowest | 4,50,000 ₹5,31,000 | 2,70,000 ₹2,70,000 |
| 1.07 | Supply and installation of PVC Panels, Supply, fabrication, and installation of rigid expanded foam PVC boards 12mm thick, in color as selected by the Officer in Charge with smooth, finished edges. The boards will be made of high-quality expanded PVC (Forex) with a density of 0.45 – 0.55 g/cm³, ensuring durability and rigidity. The material will have tensile strength of ≥ 6 MPa, compressive strength of ≥ 8 MPa, and flexural strength of ≥ 10 MPa, making it suitable for signage applications. The boards will be resistant to moisture and impact, ensuring long-term durability in indoor environments. They will also meet UL 94 V-0 or equivalent flame retardancy standards for safety. The surface will be matte to eliminate glare, ensuring clear visibility without reflections. The boards will be mounted 25mm (1 inch) away from the partition wall using fabricated PVC spacer elements in a 2ftx2ft grid of adequate strength to ensure rigidity and allow for backlighting installation. | 700 | Sq. Ft | 1,75,000 ₹1,75,315 | 1,40,000 ₹1,65,200 Lowest | 1,75,000 ₹1,75,000 |
| 1.08 | Fabrication & Installation of Rectangular Raised Floor Platform (Platform A).Fabrication and installation of a rectangular raised floor platform measuring 34 feet x 22 feet x 0.5 foot in height, as per the given drawing at the site. The platform will have a frame made of 2" x 3" teakwood for structural integrity and support. The platform surface will be constructed using 19mm thick BWP plywood (IS 710), known for its durability and resistance to moisture. The plywood will be covered with Green/Century make plywood on the top surface, ensuring a high-quality finish. The top surface will be finished with a similar material as in (1). All edges of the platform will be properly finished with smooth, rounded corners to prevent any sharp edges and ensure safety.The platform will be fixed securely to the floor as per the given layout, with all necessary materials, including screws, fasteners, and adhesives, provided. Access ramps or steps will be incorporated as per the Officer in Charge’s requirements. | 748 | Sq, Ft | 2,76,760 ₹2,77,258.17 Lowest | 4,11,400 ₹4,85,452 | 7,48,000 ₹7,48,000 |
| 1.09 | Fabrication & Installation of curved Seats. Fabrication and installation of seats following given curved or straight design, each measuring 18 inches in height, with a 6-inch thick cushion, and a width of 2 feet. The seats will be constructed using a 2" x 3" teakwood frame for the primary structural support, and 19mm thick BWP plywood (IS 710) for the seat body and backrest. The surface of the seats will be finished with a laminate surface (color/pattern to be selected by the Officer in Charge), while the cushion will be made of high-density foam with a density of 40-45 kg/m³ and ILD (Indentation Load Deflection) of 25-30, 6 inches thick. The foam will be upholstered with genuine leather (color selected by the Officer in Charge, as per exhibition standards) to provide a premium finish and durability. The seat will be securely fastened to the floor or base structure, and all visible surfaces will be finished with high-quality laminate to ensure durability and easy maintenance. Internal framing will be made from teakwood, with appropriate bracing for stability and strength. The laminate and cushion will be securely fixed, ensuring the seat is both aesthetically pleasing and functional. | 6 | Nos | 60,000 ₹60,108 Lowest | 1,20,000 ₹1,41,600 | 90,000 ₹90,000 |
Tender Value
Refer Docs
EMD Value
₹2.5 L
Closing Date
17 Jul 2025, 3:00 pmClosed
Sr. Controller (Stores and Purchase)
SECTOR V BLOCK GN BIDHANNAGAR KOLKATA 700 091
SITC of Exhibits structure cabinet including interior development flooring partition panelling vinyl graphic electrical fittings etc at MUHS IKSHANA Museum at Nashik
2025_NCSM_866296_1
I-18012/10/25(133) SITC of interior panel and misc fabrication works at MUHS Nashik
Open Tender
Miscellaneous Works
Supply
90 days
MUHS IKSHANA Museum Nashik Maharashtra
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹2.5 L
Yes
National Council of Science Museum
22 Aug 2025
26 Jun 2025
18 Jul 2025
26 Jun 2025
17 Jul 2025
12 Jul 2025
27 Jun 2025 - 7 Jul 2025
9 Jul 2025
Fabrication and supply of Exhibits structure including flooring etc
Flooring Works, Supply and installation of high-performance, seamless polyurethane (PU) poured flooring, with a minimum thickness of 3mm, suitable for heavy-duty, gallery-grade application in high-footfall exhibition spaces. The flooring system shall be monolithic and jointless, offering superior resistance to abrasion, impact, and chemical exposure. The material must be anti-slip, fire-retardant (conforming to IS 3808 or equivalent), and UV-stable to prevent discoloration over time. It should have a matte finish and be available in neutral color tones such as white, grey, or beige, finalized in consultation with the Officer-in-Charge. The surface must be easy to clean, stain-resistant, and exhibit antibacterial or antimicrobial properties. Recommended and approved Indian market brands include Sika, Fosroc, BASF (MasterTop systems), Asian Paints SmartCare PU Flooring, and Tremco India, or other equivalent ISI/CE-certified systems
Wall Painting Works, Surface preparation including minor crack repairs, putty work (where required), sanding, dust removal, application of approved primer, and two or more coats of premium-quality emulsion paint on designated wall areas. Paint must be washable, low-VOC, matte or eggshell finish, suitable for gallery use under high illumination. Approved brands are Asian Paints Royale, Nerolac Impressions, or equivalent ISI-certified paints. Final paint color and texture (smooth, mild texture, or designer finish) to be finalized by the Officer in Charge. Uniform finish, free from brush marks, lap marks, and color variations, must be achieved.
Fabrication & Installation of Straight Wooden Partitions Fabrication and installation of straight modular partition walls 8 feet in height, constructed using naturally seasoned straight, knotfree, CP teak wood frame of cross-section 2” x 1” (50mm x 25mm nominal) arranged in a grid pattern of 2’ x 2’. One side of the frame to be covered with 12mm thick BWP-grade plywood (conforming to IS 710 standards). Exterior surfaces to be finished with 1.0mm thick premium decorative laminate (Greenlam, Centruy, AICA Sunmica, Merino, or equivalent) in matte finish as approved by the officer incharge. Partition system must be designed to structurally support lightweight exhibition graphics, TV, Monitor, Light Fixtures, etc. and exhibits up to 15kg per mounting point. Includes full internal framework bracing, concealed base supports, edge banding, and finishing of all visible laminate surfaces to achieve a uniform and professional gallery-grade appearance.
Fabrication & Installation of Curved Wooden Partitions Fabrication and installation of curved modular partition walls 8ft in height, constructed using naturally seasoned, straight, knot free, CP teak wood frame of cross-section 2” x 1” (50mm x 25mm nominal) for verticle memeber and use 50mm width x 25mm thick plywood for making curved horizontal memebers with a grid of 450mm x 450mm arranged appropriately to follow the curve, with internal grid adapted to structural needs. Frame to be covered on both sides with 6mm thick bendable plywood (BWP grade conforming to IS 710) for smooth curvature. One surface to be finished with 1.0mm thick premium flexible decorative laminate (Greenlam, Century, AICA Sunmica, Merino, or equivalent) in matte finish as approved by the Officer incharge. Partition must be designed to structurally support lightweight exhibition graphics, TV, Monitor, Light Fixtures, etc. and light exhibits up to 10kg per mounting point.
Fabrication & Installation of Rectangular Raised Floor Platform (Platform A).Fabrication and installation of a rectangular raised floor platform measuring 34 feet x 22 feet x 0.5 foot in height, as per the given drawing at the site. The platform will have a frame made of 2" x 3" teakwood for structural integrity and support. The platform surface will be constructed using 19mm thick BWP plywood (IS 710), known for its durability and resistance to moisture. The plywood will be covered with Green/Century make plywood on the top surface, ensuring a high-quality finish. The top surface will be finished with a similar material as in (1). All edges of the platform will be properly finished with smooth, rounded corners to prevent any sharp edges and ensure safety.The platform will be fixed securely to the floor as per the given layout, with all necessary materials, including screws, fasteners, and adhesives, provided. Access ramps or steps will be incorporated as per the Officer in Charge’s requirements.
Fabrication & Installation of Semicircular Raised Floor Platform (Platform B), Fabrication and installation of a semicircular raised floor platform with a diameter of 17 feet and a height of 18 inches. The structure will be fabricated using 2" x 3" teakwood beams for the primary structural frame and 19mm thick BWP plywood (IS 710) for the platform surface. The platform will be designed with adequate internal bracing to support the curved shape and ensure structural integrity. The top surface will be finished with a similar material as in (1). All edges of the platform will be properly finished with smooth, rounded corners to prevent any sharp edges and ensure safety. The platform will be supported by additional structural elements to ensure the platform’s stability and strength under load.
Fabrication & Installation of FRP Tree Structure. Fabrication and installation of a Fiberglass Reinforced Plastic (FRP) tree structure with an approximate surface area of 2000 sqft. The tree structure shall be fabricated using high-quality FRP material with IS 6746 standards, reinforced with high-strength E-glass fibers for optimal structural integrity. The internal structural support will consist of a steel frame made from IS 2062 mild steel, with dimensions of 2" x 2" x 0.125" (50mm x 50mm x 3mm) steel sections for the trunk and 1.5" x 1.5" x 0.125" (38mm x 38mm x 3mm) for the branches. The frame will be welded with reinforced joints at critical stress points to ensure stability. The steel frame will be coated with a Zinc-rich primer and finished with epoxy paint to provide corrosion resistance. The tree structure will be mounted around an existing pillar at site for long term stability. The visible parts of the structure, including the bark texture and foliage, will be finished with a UV-resistant gel coat to ensure durability and color retention over time.
Supply & Installation of Gallery Lighting Fixtures (General & Spot Lights). Supply and installation of 40 general lighting fixtures and 40 spot lighting fixtures suitable for gallery illumination. The general lighting fixtures shall be LED track-mounted panel lights with a CRI of 90+ and a CCT of 4000K (neutral white) to provide uniform, glare-free illumination for the gallery space. These fixtures shall have a wattage of 18-24W and an average beam angle of 120° to ensure even distribution of light across large areas. The spot lighting fixtures shall be LED track-mounted spotlights with a CRI of 90+ and a CCT of 3000K (warm white) to enhance exhibit highlights. These fixtures will have a wattage of 15-20W and an adjustable beam angle of 15° to 45° for precise and directed illumination of specific artwork or exhibits.
Fabrication of Central Exhibit structure as per design drawings. Fabrication, supply, installation, testing and commissioning of one custom central exhibit structure as per attached design drawings, constructed using naturally seasoned, straight, knot-free CP teak wood frame of nominal cross-section 2” x 1” (50mm x 25mm), fabricated precisely to dimensions and internal layout specified in the design. The structural frame shall be sheathed with 12mm thick BWP-grade plywood (conforming to IS 710 standards) on all required surfaces. All exposed wooden surfaces of the structure shall be prepared and finished in accordance with standard woodworking and finishing practices. Surfaces must be thoroughly machine- and hand-sanded to achieve a smooth, even base free of burrs, splinters, or machining marks. All joints, nail holes, and surface imperfections shall be filled with high-quality wood putty, compatible with the final finish. After puttying and final sanding, surfaces shall be sealed with appropriate wood primer, followed by two or more coats of premium-grade paint or wood polish (as specified), applied evenly to achieve a uniform, durable, and blemish-free finish. Drying times between coats must be respected, and final finish shall be free from brush marks, dust, streaks, or discoloration. All materials used must be suitable for interior application and capable of withstanding long-term public use without deterioration.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .