8190 REPAIR MAINT OF WOODEN FURNITURE ITEMS OF OFFRS JCOS ORS MD ACCN AND OTM ACCN OF ALL UNITS UNDER GE CENTRAL PUNE

Amount

Sofa set 3 seater ( part of sofa set 4/5 seater) (DRG No: FD-281/373) Removing of old unserviceable parts and supply and fix new parts made out of Ist class hard wood (teak wood) for the following:-

Front legs

Rear legs

Front Long rail

Bottom long rail

Side Rail

Back frame of rail

(h) M&L for preparing the old polished surface of complete sofa set 3 seater (part of sofa set 5 seater) by removing stains/spots with sand paper, filling the holes /crack/cavities with wood filler/bees wax and making the surface smooth and polishing with wood colour french polish to exposed surface glossy finish with complete all as specified and as directed.

Sofa single seater (Part of sofa set 4 seater and 5 seater) (DRG No: FD-281/373) Removing of old unserviceable parts and supply and fix new parts made out of Ist class hard wood (teak wood) for the following:-

Front legs

Rear legs

Front Long rail

Bottom long rail

Side Rail

Back frame of rail

M&L for preparing the old polished surface of complete sofa set single seater (part of sofa set 5 seater) by removing stains/spots with sand paper, filling the holes /crack/cavities with wood filler/bees wax and making the surface smooth and polishing with wood colour french polish to exposed surface with glossy finish complete all as specified and as directed.

Removing of old unserviceable cushion from seat and supply and fix new cool cushion foam 32 density of size 530 mm X 500 mm X 100mm thick for Sofa Set 4/5 seater, covered with superior quality tapestry cloth rate not less than 280/- per mtr with cover on Gada cloth duly zip (openable type) complete all as directed.

Removing of old unserviceable cushion from back and supply and fix new cool cushion foam 32 density of size 530 mm X 500 mm X 100mm thick for Sofa Set 4/5 seater, covered with superior quality tapestry cloth rate not less than 280/- per mtr with cover on Gada cloth duly zip (openable type) complete all as directed.

SOFA SET (DRG No: FD-18(M)/TP) Repair to sofa by replacement with new approved superior quality tapestry cloth/ rexin, Hessian cloth, long cloth, coir fiber, foam 25 mm thick in one piece for seat and one piece for back, cotton packing, twin jute and cane stick of 10mm dia and replacement of spring 100mm and 150mm including two coats of french polish to the legs all as specified and shown on Drg

Sofa with arms three seater

Sofa with arms two seater

Sofa with arms single seater

TABLE CENTER (DRG No : FD-274)

Taking down old unserviceable existing top and S &F new top of particle board 18/19 mm thick interior grade of existing size including 1.0 mm thick sunmica sheet on top of table centre and 4 mm thick 1st class hard wood (Teak wood) edging all round complete all as specified and shown on drawing.

Taking down old serviceable/ broken long rail of frame any size and S & F new long rails of 1st class hard wood (Teak wood ) finishied of existing shape and size complete all as specified and shown on drawing.

All as per item No 6.02 above but short rail.

Taking down old unserviceable/ broken legs and S & F legs of 1 st class hard wood ( Teak wood) finished smooth as per existing shape and size including tightening of joints complete all as specified and shown on drawing.

S & F hard rubber ring/ PVC shoes fixed to the bottom of legs with steel screws complete all as specified and directed.

M &L for polishing of table to all exposed wooden surace except top of the table with high class french polish and matching the new components with old one complete all as specified and directed.

TABLE DINNING 06/08 PERSON (DRG No : FD-30/ 273/ 278/ 239)

Removing existing unserviceable top from table dining 6 persons and supply and fix new top made out of pre- laminated particle board, 18 mm thick, decorative teak face on one side and another side white with 4 mm thick teak wood beading around the top as per existing shape and size all as specified and shown on drg.

All as per item No 7.01 above but table dining for 08 persons.

Replacement of broken legs from the frame of table dining 6/8 persons with new one made out of 1st class hard wood (teak wood) as per existing shape and size and fixing in the same position complete all as specified and shown in drg.

Replacement of old broken long rails for table dining 06 persons with new one made out of 1st class hard wood (teak wood) as per existing shape and size and fixing in the same position complete all as specified and shown in drg.

All as per tem No 7.04 here-in-berfoe but table dining for 08 persons.

Replacement of old broken short rail for table dining 6/8 persons with new one made out of 1st class hard wood (teak wood) as per existing shape and size and fixing in the same position complete all as secified and shown in drg.

S & F of triangular bracket of size 100X100X 30 mm thick made out of Ist class hard wood (Teak wood) on four corners

S & F hard rubber ring/ PVC shoes shall be fixed to the bottom of legs with steel screws

M & L for polishing all exposed surface of table dining 6 persons with high quality French polish in two or more coats to obtain glossy surface complete including preparation of surface all as specified and directed.

All as per item No 7.09 here-in-before but table dining for 08 persons.

TABLE WRITING OF SORTS (DRG No : FD-275/ 249/ 33)

Removing of old unserviceable table top and S & F new table top of pre-laminated particle board one side decorative and other side white 18 mm thick BWR interior grade as per existing shape and size including 4mm thick teak wood beading all around duly polished with high class french polish complete all as specified and shown on drawing

Removing of old unserviceable legs under drawer/cup board side of table writing and S & F new leg of 1 st class hard wood ( teak wood ) as per existing shape and size duly planned and finished duly polished complete all as specified and shown on drawing.

All as per item No 8.02 above but opposite side of drawer/cup board

Removing of old unserviceable back ply of table writing and S & F new back of 6 mm thick plywood commercial type as per existing shape and size complete all as specified and shown on drawing.

M & L for polishing of table writing in side and outside legs with superior quality french polish except top and bottom complete all as specified and shown on drg.

TABLE DRESSING LADIES WITH MIRROR : (DRG No: FD-32 (M)/ 251/ 378 ) Replacement of unserviceable/damaged components of table dressing ladies with mirror with new components as per drg and complete repair to make the table dresing ladies with mirror serviceable as directed by Engineer-in-Charge including polishing of exposed surfaces complete all as specified and shown indrg including supply and fixing of the following components :-

Removing existing unserviceable looking mirror with frame and plywood back from table dressing ladies with mirror and S & F 5.5 mm thick looking mirror with frame and 6 mm thick plywood back as per existing shape and size and duly polished complete all as shown on drg and directed.

Removing existing unserviceable/ damaged plastic laminated sheet on top from table dressing ladies with mirror, sliding glass shutter & aluminium channel and S &F new 1mm thick plastic laminated sheet of natural teak wood pattern, best quality as per existing shape including glass shutter and aluminium channel complete all as specified and shown on drg.

TABLE DRESSING GENTS WITH MIRROR (DRG No : FD-31(M)/ 230/ 379) Repair/ Replacement of unserviceable /damaged components of table dressing gents with mirror with new components as per drg and complete repair to make the table dressing Gents with mirror serviceable as directed by Engineer-in-Charge including polishing of visible surfaces complete all as specified and shown in drg incl supply and fixing of the following components.

Removing existing unserviceable looking mirror with frame and plywood back from table dressing Gents with mirror and S &F 5.5 mm thick looking mirror with frame and 6mm thick plywood back as per existing shape and size and duly polished complete all as shown on drg and directed.

TABLE 3'X3'/ TABLE DINNING 900 X 900 X760mm (DRG No: FD -291/ 88 TP)

Removing existing unseviceable top from table 3' x 3' and supply and fix new top made out of pre-laminated particle board, 18mm thick, decorative teak face on one side and other side white and 4 mm thick Ist class hard wood (teak wood) beading all around the top as per existing shape and size all as specified and directed.

Replacement of broken legs from the frame of table 3' x 3' with new one made out of Ist class hard wood (teak wood) well seasoned as perexisting shape and size and fixing in the same position complete all as specified and shown in drg.

Replacement of old broken side rails of table 3' x 3' with new one made out of Ist class hard wood (teak wood) well seasoned as per existing shape and size and fixing in the same position complete all as specified and shown in drg.

M & L for polishing all exposed surface of table 3' x 3' with high quality French Polish in two or more coats to obtain glossy surface complete including preparation of surface all as specified and directed

TABLE 3' X 2' W/o DRAWER/TABLE 3' X 2' WTIH DRAWER (DRG No: FD-283/ 284)

Removing existing unserviceable top from table 3' X 2' w/o drawer and supply and fix new top made out of pre- laminated particle board, 18mm thick, decorative teak face on one side and other side white and 4mm thick Ist class hard wood (teak wood) beading all around the top as per existing shape and size all as specified and shown on drg.

Replacement of broken legs from the frame of table 3' x 2' w/o drawer with new one made out of Ist class hard wood (teak wood) as per existing shape and size and fixing in the same plsition complete all as specified and shown in drg.

Replacement of old broken long rails with new one made out 1st class hard wood (teak wood) as per existing shape and size fixing in the same position complete all as specified and shown in drg.

Replacement of old broken short rails with new one made out of Ist class hard wood (teak wood) as per existing shape and size fixing in the same position complete all as specified and shown in drg.

Replacement of new drawer made out of 1st class hard wood (Teak wood) with alumminium anodized 35mm/40mm dia knob complete allas shown on drg and as directed by Eng-in-Charge.

Replacement of bottom center stiffener with new bottom center stiffener made out of 1st class hardwood (teak wood) complete all as shown on drg and as directed.

Replacement of bottom side stiffener with new bottom side stiffener made out of 1st class hardwood (teak wood) complete all as shown on drawing and directed.

Supply and fix new rectangular bracket of size 100mm x 100mm x30mm fixed with steel screws complete all as directed.

M&L for preparation of old polished wooden surface and polishing with high quality french polish in two or more coats to obtain glossy surface complete all as specified and directed

TEAPOY (DRG No: FD-232)

Taking down old unserviceable existing top and S& F new top of particle board 18/19 mm of existing size including 1.00 mm thick sunmica sheet on top of Teapoy and 4 mm thick 1st class H.W (Teak wood) edging all around the table top complete all as specified and shown on drawing.

Removing of old unserviceable/broken existing legs of Teapoy and S & F new legs of 1st class hard wood (Teak wood) as per existing shape and size duly planned and polished complete all as specified and shown on drawing.

All as per item No 13.02 here-in-before but stiffener/long rail/ side rail.

M& L for polishing of teapoy to all exposed surfaces except top of the Teapoy with high class French polish and matching the new components with old surfaces complete all as specified and directed.

TABLE BED SIDE (DRG No: FD-276)

Dismantling/taking out old existing broken side of table bed side of any description, in any position and replacement with 18 mm thick pre-laminated particle board exterior grade BWR with teak wood vennered on one side & other side commerical, made to shape and size,as shown on drawing complete and as directed.

Dismantling/ taking out old existing broken shelf of table bed side of any description,in any position and replacement with 18 mm thick pre-laminated particle board exterior grade BWR with teak wood vennered on one side & other side commerical, made to shape and size, as shown on drawing and as directed.

Dismantling/taking out old existing brocken back ply of table dressing and replaced with 6mm thick ply wood one side teak veneered and otherside commercial, grade BWR made to shape and size,as shown on drawing complete all as specified and directed.

M & L for polishing of table bed side with high class french polish including preparation of surface complete all as shown on drg and as directed.

PEG TABLE (DRG No: FD-277/ 384)

Taking out old unserviceable existing top and S & F new top of particle board 18/19 mm BWR interior grade of existing size including 1.00 mm thick sunmica sheet on top of Peg table and 4mm thick 1st class hard wood ( teak wood) edging all round the table top complete all as directed and shown on drawing.

Taking out old unserviceable/broken long rail of frame any size and S & F new rail of 1st class hard wood ( Teak wood) planned &polished of existing shape and size complete all as specified and shown on drawing.

All as per item No 15.02 here-in-before but short rail.

Taking out old unserviceable/broken legs and S&F new legs of 1 st class hard wood ( Teak wood) planned & polished as per existing shape and size complete all as specified and shown on drawing.

M& L for polishing of table peg to all exposed surface expect top of the table with high class French polishing and matching the new components with old surfaces complete all as specified and directed

STOOL CB DRESSING (DRG No: FD-27, FD-282, FD-252)

Replacement of following parts of stool CB dressing with new parts matching with the existing including removing of old broken parts complete all as specified and directed. Teak wood leg.

Teak wood top rail

Teak wood short rail

M & L for polishing with high class French polish on old/new surface including preparing old/new of surfaces of stool CB dressing to achieve glossy finish complete alll as specified & directed.

HAT STAND WITH MIRROR (DRG No: FD-233)

Taking down old unserviceable peg of hat stand and S &F new aluminium peg of existing shape and size with required size fixed with brass screws complete all as specified and directed.

Taking down old unserviceable mirror of hat stand and S&F new mirror 5mm thick as per existing shape and size including beading and 6mm thick ply wood back complete all as specified and directed.

M & L for polishing with two coats of French polish to all exposed wooden surface including preparation of old/new surface/components all as specified and directed.

CHAIRS OF SORTS (CHAIR DINING,CHAIR WRITING AND CHAIR EASY): Repair to various type of chair wooden by replacement of all unserviceable components with new one made out of 1st class hard wood (teak wood), well seasoned as per existing shape and size and fixing in the same position complete including polishing with two coats of french polish to match as shown in drg and directed Chair Dining (DRG No: FD-16/ 208/ 279)

Front leg

Rear leg

Stiffner

Front and Rear Rail with holes

Rubber Shoes

CHAIR WRITING (DRG No: FD- 20/ 202/ 250/ 280)

Front leg

Rear leg

Front and Rear Rail with hole

Stiffner

Rubber shoes

CHAIR EASY (DRG No: FD-229/ 201/ 17)

Front leg

Rear leg

Arm (RT/LT)

Side Rail with holes

Front /rear rails with holes

Rubber shoes

Removing existing unserviceable canes from various type of chairs and re- caning the same with new platinc cane 2 mm wide half round, oval type and 0.35 mm thick in white colour and border shall be done as per Godrej pattern complete all as specified and shown on drawing.

Chair dining

Chair writing

Chair easy seat and back

Stool CB dressing

TABLE OFFICE OFFICER/CLERK WOODEN (DRG No: DB-4120 DB-4119/ 84)

Removing of existing unserviceable table top and S&F 18 mm thick pre-laminated particle board exterior grade with 4mm thick teak wood beading all round the top of table office offce. Complete all as shown on drg all as specified.

All as per item No 22.01 here-in-before but for Table office clerk wooden.

Replacement of shutter made out of 18 mm thick one side teak veneered particle board with 4mm thick teak wood beading on three sides of shutter including fixing complete with paino type hinges as shown on drawing for table office officer/ clerk wooden all as specified and derected.

Replacement of leg with new one made out of 1st class hard wood (teak wood) planne and duly polished as per, shape & design as shown on drg for table office officer/ clerk wooden all as specified and directed

Replacement of long rail with new one made out of Ist class hard wood (teak wood) planned and duly polished aas per size, shape & design as shown on drg for table office officer/clerk wooden all as specified and directed

Replacement of short rail with new one made out of teak wood planned and duly polished as per shape & design as shown on drgs for table office officer/clerk wooden all as specified and derected.

Replacement of drawer with new one made out of 1st class hardwood (teak wood) planned duly polished as per size, shape & design as shown on drgs for table office officer/clerk wooden all as specified and derected.

S & F in repairs Knob 55 mm dia all as directed and snown on drg.

M & L for polishing with two coats of french polish on old and new surface including preparation of old/new surface of table office officer / clerk complete all as directed and snown on drg.

BED HARD WITH PLY TOP (DRG No: FD-245/ 246/ 247)

Replacement of old worn out top of ply with new 12 mm thick, 07 Nos of ply, commercial facing, grade BWR, type BB of required shape and size as specified and shown in drg

Replacement of old broken long rails with new one made out of Ist class Hard wood (teak wood) as per existing shape and size and fixing in the same position duly polished with french polish to match with existing complete all as specified and shown in drg.

Replacement of old broken short rail with new one converted from old long rail obtained from item No 23.02 here-in-above as per existing shape and `size and fixing in the same position duly polished with french polish to match with existing complete all as secified and shown in drg.

Replacement of old broken legs of bed hard with new one made out of Ist class Hard wood (teak wood) as per existing shape and size and fixing in the same position duly polished with french polish to match with existing all as specified and shown in drg.

Replacement of old worn out head board with new one made out of ply wood Grade-I quality 4 mm thick one side teak face with all as around beading complete all as specified and shown in drg.

All as per item No 23.05 here - in- before but for foot board.

Replacement of old broken stiffner with new stiffener of size 40 x 60 mm made out of Ist class Hard wood (teak wood) approx 3'-6" long in the centre to support the ply wood complete all as specified and shown in drg.

STEEL BEND CLAMP FOR CORNER : Replacement of old broken bent clamp with new one made out of MS flat iron of size 35 x 3 mm and painting with two coats of synthetic enamel paint over a coat of red oxide primer all as specified and shown in drg.

POLISHING : M & L for preparation of old polished wooden surface and polishing with high quality french polish in two or more coats to obtain glossy surface complete all as specified and directed.

ALMIRAH MED WOODEN (DRG No: DB-3595)

Removing of existing unserviceable shutter and S &F new shutter made out of 18 mm thick one side teak veneered particl board exterior grade ISI marked with 4 mm thick teak wood beading on three sides of shutters all as specified and directed

Removing of existing unserviceable back and S &F new back made out of 12 mm thick plywood commercial type all as specified and directed.

Taking down old unserviceable leg and S &F new leg of teak wood duly planned and polished complete all as specified and directed.

Taking down old unserviceable shelf and S & F new shelf made out of 18 mm thick particle board commercial type with 4mm thick teak wood beading on front edge of the shelf with nails over 25 x25 mm MP teak wood batten all as specified and deircted.

Taking down old unserviceable hinges and S &F 100mm long MS, ISI markked hinges all as specified and directed.

Taking down old unserviceable Hasp and staples and S &F of new aluminium anodized Hasp and staples 100 mm long with steel screws all as specified and directed.

Taking down old unserviceable Handle and S & F new aluminum anodized 125mm long handle fixed with steel screws all as specified and derected.

M & L for polishing to Almirah med wooden with french polish in two or more coats to internal & external surfaces (except bottom) to obtain glossy surface complete all as specified and directed.

ALMIRAH LARGE WOODEN (DRG No : DB-4116)

Removing of existing unserviceable shutter and S &F new shutter made out of 18 mm thick one side teak veneered particl board exterior grade ISI marked with 4 mm thick teak wood beading on three sides of shutters all as specified and directed

Removing of existing unserviceable back and S &F new back made out of 12 mm thick plywood commercial type all as specified and directed.

Taking down old unserviceable leg and S &F new leg of teak wood duly planned and polished complete all as specified and directed.

Taking down old unserviceable shelf and S &F new shelf of 18 mm thick particle board commercial type with 4mm thick teak wood beading on front edge of the shelf with nails over 25 x25 mm MP teak wood batten all as specified and directed.

Taking down old unserviceable hinges and S &F 100mm long MS, ISI marked hinges all as specified and directed.

Taking down old unserviceable Hasp and staples and S &F of new aluminium anodized Hasp and staples 100 mm long with steel screws all as specified and directed.

Taking down old unserviceable Handle and S & F new aluminum anodized 125mm long handle fixed with steel screws all as specified and derected.

M & L for polishing to Almirah Large wooden with french polish in two or more coats to internal & external surfaces (except bottom) to obtain glossy surface complete all as specified and directed.

Mahesh Traders

KASTURILAL HARICHAND OHRI AND SONS