WBPWD/SSEWEC /BRED /NIQ-46 /2025-26

Dismantling the existing iron clad main switch, cable, wiring, switchboard, HTPNDB,SPNDB & mending good damages to the original finish as per direction of EIC. Total points=332, value=[332x30]

Supplying and fixing 415V, 200A,TPN SFU on load front operated Changeover switch with Sheet Steel enclosure on angle iron frame on wall with nuts bolts etc Make; L&T/ siemens/Havells [page no. D-3, item no.4(a)]

Supplying and fixing 240V, 32A, DP with fuse on L&N with sheet stee lenclosure onflat iron/angle iron frame on wall with nuts bols etc incl. S&F 3 nos. DIN type HR fuse as per rating. [For pump] Make; L&T/ siemens/Havells [page no. D-1, item no.1(a)]

Supply & Laying of XLPE/ PVC insulated sheathed Copper unarmoured power cable of 1.1 KV grade 4 Core x 50 sqmm strandred after on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting [Make : Gloster/KEI /Polycab / RR Kable] [ From Wbsedcl meter to main switch ] [Supply of cable - Non-Schedule Item, Laying of Cable - PWD/GS Page: F-2 Item: 1(b)]

Supply & Laying of XLPE/ PVC insulated sheathed Al armoured power cable of 1.1 KV grade 4 Core x 95 sqmm strandred afteron wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting [Make : Gloster/KEI /Polycab / RR Kable] [ From Main switch to VTPN DB ] [Supply of cable - Non-Schedule Item, Laying of Cable - PWD/GS Page: F-1 Item: 2(E)]

Do......................Do................. 2 Core x 10 sq.mm [ From HTPN DB to staff room +shade+out side bath room SPNDB and pump ] [Supply of cable - Non-Schedule Item, Laying of Cable - PWD/GS Page: F-1 Item: 2(a)]

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below (a)4 Core x 95 sq.mm [PWD/GS Page: F-4 Item: 7/c,7/a ]

Do………………………….Do……………………….Do………………. 4 Core x 50 sq.mm

Do………………………….Do……………………….Do………………. 2 Core x 10sq.mm

Finishing of the XLPE/PVC insulated armoured cable ends by soldering with cable sockets and insulated tapes etc., including supplying sockets, soldering materials, tapes etc. and making connection to switch, BDB and BBC etc. (a) 4 Core x 95 sq.mm [PWD/GS Page: F-5 Item: 8/b ]

Do………………………….Do……………………….Do………………. 4 Core x 50 sq.mm

Do………………………….Do……………………….Do………………. 2 Core x 10sq.mm

Supply and fixing 415V. 6 way, Double Door MCCB incomer VTPN DB with IP 42/43 protection, having 200 A adjustable Four pole MCCB as incomer 6 nos 63 A TP MCB (10KA)asoutgoings,on angle iron frame on wall & mending the damages to original finish including interconnection and terminations with suitable size of copper wire, duly socketed by solderless Copper Socket and neutral link and provision for earthing attachment, as per direction of E.I.C.(Make -Legrand/ABB/L&T /Seimens) [PWD/GS Page: D-11 Item: 15, Page: D-8 Item: 10, Page: D-6 Item: 7] [ VTPN DB for Lighting/Power DB =1 for whole Building]

Supply and Fixing 4 way double door horizontal TPN MCB distribution board with IP-42/43 protection, including 63A, 4 Pole MCB isolator as incomer, 12Nos 10-32A SP MCB as outgoing ,on angle iron frame on wall & mending the damages to original finish including inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.(Make -Legrand/ABB/L&T /Seimens) [PWD/GS Page: D-10 Item: 14, D-5 Item: 6, D-6 Item: 7 ] [ HTPN DB for Lighting/Pwr Plug/Computer Brd = 3 (Grnd - 1, 1st - 1,(staff room +shade+out side bath room )-1 ]

S&F 2+16 way double-door SPN MCB Distribution Board with IP-42/43 protection, with 240 V 40 A DP MCB isolator as incomer and 16 nos. 6-32A SPMCB as outgoing, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.as per GS (Make -Legrand/ABB/L&T /Seimens) [PWD/GS Page: D-9 Item: 13, Page: D-5 Item: 6 & 7] [SPN for EI =6 (Grnd - 3, 1st - 2, 2nd - 1) [ SPN for Pwr Plug/Computer Brd = 9 (Grnd - 4, 1st - 4, 2nd - 1)]

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire ((Make : Polycab/RR/Gloster/Havells/KEI) in 20 mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copperwire for ECC, to light/fan /call bell points with Modular type switch (Make : AnchorRoma/Legrand mylink/Cabtree) fixed on Modular GI switch board with top coverplate and 2no. suitable size“Ph&N”copper bar & earthing attachment fixed on wall incl. mending good damages to original finish. Average run 8 mtr [PWD/GS Page: E - 24 Item: 1 ]

Distributionwiringin1.1KVgrade22/0.3(1.5sqmm)single corestranded'FR' PVCinsulated&unsheathedcopperwire (Brand :Polycab/RR/Gloster/Havells)in 20 mm size PVC rigid conduit 'FR' (Precision make), with 1.1KV grade 1x22/0.3 (1.5sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 6A 3pin Modular type plug socket & switch (Brand Anchor Roma /Legrand mylink/Cabtree ) on 4Module GI switch board with 3/4Module top cover plate on wall incl. necy. connection making earthing attachment, painting and mending good damages to building works. On board [PWD/GS Page: E-24 Item: 3 ]

Supplying andDrawing 1.1KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand Polycab/RR/Gloster) of the following size sinthe prelaid polythene pipe and by the prelaid GI fishwire and making necy. connection as required 4 x 16 sq mm + 2X 10 sqmm [PWD/GS Page: E-9 Item: 1(g1) ] [VTPN DB To HTPN DB]

Do………………………Do…………………Do………………….. 2 x 4 sq mm + 1X 2.5 sqmm [HTPN DB To Gyeser]

2 x 10 sq mm + 1X 6 sqmm [ From HTPN DB to SPN DB ]

Do………………Do………………..Do………….2 x 2.5 sq mm + 1X 1.5 [For Power Socket/computer board]

Do…………………..Do…………………Do………………3x 1.5 sq mm[ for separate 2x5A separate plug and high bay light]

Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes 4 x 16 sq mm + 2X 10 sqmm [PWD/GS Page: F-5 Item: 9 ] [VTPN DB To HTPN DB]

Do………………………Do…………………Do………………….. 2 x 4 sq mm + 1X 2.5 sqmm [HTPN DB to Geyser]

2 x 10 sq mm + 1X 6 sqmm [ From HTPN DB to SPN DB ]

Do………………Do………………..Do………….2 x 2.5 sq mm + 1X 1.5 [For Power Socket/ Computer board]

Do…………………..Do…………………Do……………...3 x 1.5 sq mm

Supplying and fixing 20 mm PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works. [PWD/GS Page: E-16 Item: 7/a ]

Supply & Fixing 240 V, 3 nos. 6 A, 3 pin Modular type plug socket & 1 nos. 6/16 A, 3 pin Modular type plug socket with 3 nos. 6A Modular type switch & 1 nos. 6/16 A, 3 pin Modular type switch (Brand Anchor Roma /Legrand mylink/Cabtree ), 20A Modular switch type SP MCB (C-Curve) and Indicator without plug top on 2 row 12 Module GI Modular type switch board with 2 row 12 Module top cover plate flushed/ on wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [NS]

Supply & Fixing 240 V, 2 nos. 6 A, 5 pin Modular type plug socket (Brand Anchor Roma /Legrand mylink/Cabtree ) with separate 2 nos. 6A Modular type switch, without plug top on 6 Module GI Modular type switch board with 6 Module top cover plate flushe/ on wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc

Supply & Fixing 240 V, 2 nos. 16 A, 3 pin Modular type plug socket (Brand Anchor Roma /Legrand mylink/Cabtree ) with 2 nos. 16A Modular type switch, without plug top on 6 Module GI Modular type switch board with 6 Module top cover plate flushed/onwall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc [PWD/GS Page: E-17 Item: 1, 3, 4]

Supply & Fixing 240 V, 1200 mm, 18/20 W, 110 lm/W single LED light fitting incl. LED Tube light (Fibre Body), suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. [Supply of light fittings/Light - Non-Schedule Item, Fixing of Light - PWD/GS Page: C-2 Item: 17 ] [Make Philips/ Wipro/Surya/Jaquar](With 3 years warrenty)

Supply & Fixing 240 V, 1200 mm, 18/20 W, 110 lm/W Double LED light fitting incl. 2 nos. LED Tube light (Fibre Body), suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. [Supply of light fittings/Light - Non-Schedule Item, Fixing of Light - PWD/GS Page: C-2 Item: 17 ] [Make Philips/ Wipro/Surya/Jaquar](With 3 years warrenty)

Supplying and Fixing of Box type fan clamp of 150mm dia & 80mm depth made of 16 SWG CRCA sheet with one end duly sealed by cover, properly welded, incl. S & F 12mm dia 600mm long MS rod duly bent by heat treatment at the centre position of rod to grip fan bobbin properly, incl. binding the rod and fan box with reinforcement by 22 SWG steel binding wire, incl. supplying & covering the box with alkathene sheet, placed in order to prevent concrete from entering the box. [PWD/GS Page: D-14 Item: 31 ]

Supply & Fixing 240 V, <50 W, 320 RPM, 1200 mm sweep ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessaryconnection as required by 2x1.5 sqmm flexible copper wire.(Make - Usha Striker PWD/Crompton HS/Similar specification of Orient) (With 2 years Warrenty) [Supply of Fan - Non-Schedule Item, Fixing of Fan - PWD/GS Page: C-3 Item: 21/a ]

SITC of 10 Litre water geyser of following specifacation and accessories : Closed water heater ; Class - I, 230 V/ 50 Hz, AC, BEE 5 star rating, porcelain Element with Tubular incology 800 Element copper and outer container should be of Mild Steel and water proof powder coating to product from rust and corrision with the facility of Red-indicator of 'Heating' NEON Light indicator for working of water heater and with polyurethene foam with safety of Thermostat, Thermal cut-out, Multi function valve & sarificial Anode, and must be protected against galvanic corrision using Megnesium sacrificial anode, manufactured in modern, automated plant using European Technology (Make - VENUS Splash/Raycold/AO Smith/Bajaj/Crompton) [Non-Schedule Item ]

Supply & Fixing 240 V, 35 W, 920 RPM 225 mm sweep heavy duty AC exhaust fan on 16''x16'' mm thick plywood, after making hole and mending good damages to original finish incl. S & F al. louver shutter as per direction of EIC Make - Orient/EPC/Crompton/Havells) [Supply of Fan - Non-Schedule Item, Fixing of Wall Fan - PWD/GS Page: C-4 Item: 28 ] [Incl. for Lift =4 ]

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc. [PWD/GS Page: E-18 Item: 10]

Earthing Installation – with Pipe Electrode : Excavation of soil for installation of Earth Electrode and filling & ramming. For Soft Soil [PWD/GS Page: G-1 Item: 1]

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts.long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm diax 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below : By TATA-Medium GI pipe [PWD/GS Page: G-1 Item: 2/a] [8 nos. for Lift & 4 nos. for EI & 2 nos. for IT]

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos.12 mm dia holes on the GI pipe. [PWD/GS Page: G-2 Item: 3/a]

Earth Busbar Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 50 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required. [PWD/GS Page: G-2 Item: 4/c]

Earth Continuity Strip Connecting the equipments to earth busbar including S & F 20 mm x 3 mm Galvanised (Hot Dip) MS Flat on wall / floor with GI saddles as required and connection to equipments with incl. drilling holes, bolts, nuts, washers etc. [PWD/GS Page: G-3 Item: 5/c]

Head - II : Installation of Street Light.

S&F Timer Control Unit for single phase AC Machine assembled with - 12-way SPN DB Box (L&T / Cabtree/Legrand/Siemens/ABB) - 1 no. 32 A DP MCB Isolator (Make: Siemense / Legrand / L&T) - 01 no. Digital 24 hour time switch (GIC/L&T) - 1 no. 32A three pole contactor (L&T) - 01 no. Centre off 2 way toggle switch - 1 no. 32Amp. Barirrer type terminal- 1 no. LED indicating lamp (L&T: SIL R 240V) - 01 No. 2X4sqmm+2.5sqmm copper wire 0.5 Mtr. with complete interconnection with auto-mannual bypass arrangement with locking arrangement incl. making/cutting door of SPN DB box for fixing arrangement of toggle switch, Locking arrangement, LED indicator etc. as required as per direction of EIC. [ For building Light]

Supply and delivery and fixing of LED Street Light (230vac, 90Watt, 3000-4000K, IP 66, THD<10%, bult in 2.5KV SPD) with all necessary connection. [Make: PHILIPS, Jaquar/Surya-]. Manufacturer's warranty should be not less than three years. (NS)

S&F 1.5mtr. Long 40mm dia G.I. detachable single armbracket with sleeves, nuts, etc. for fixing the street light fitting. as directed by EIC. [Make - Bajaj / Utkarsh / Jindal ]

Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint. page-[H-5/5]

Supplying and Drawing 1.1KV single core stranded R'PVC insulated & unsheathed single corestranded copperwire (Brand Polycab/RR/Gloster/) of the following sizes in the prelaid polythene pipe and by the prelaid GI fishwire and making necy. connection as required 3 x 1.5 sqmm [Page-E-9,item no.1(b)]

Supplying and fixing 20 mm PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works. [PWD/GS Page: E-16 Item: 7/a ]

Supply & Laying of PVC insulated sheathed Al / XLPE armoured power cable of 1.1 KV grade 2 Core x 6 sqmmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed [Make : Havells/ Polycab / RR] [ For building light and pump ] [Supply of cable - Non-Schedule Item, Laying of Cable - PWD/GS Page: F-1 Item: 2(E)]

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below (a)2 Core x 6 sq.mm [PWD/GS Page: F-4 Item: 7/a ]

Finishing of the XLPE/PVC insulated armoured cable ends by soldering with cable sockets and insulated tapes etc., including supplying sockets, soldering materials, tapes etc. and making connection to switch, BDB and BBC etc. (a) 2Core x 6 sq.mm [PWD/GS Page: F-5 Item: 8/b ]

Please Enable Macros to View BoQ information