Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.8 LAccepted-Finance PLOT NO 223 INDUSTRIAL AREA PHASE 2 PANCHKULA 134109 HARYANA | PANCHKULA | PANCHKULA | HARYANA | 134109 | L1 | Accepted-Finance Low | |
| 2 | L2₹37.5 L+₹71,269 (1.94%)Accepted-Finance | L2 | Accepted-Finance High | |
| 3 | L3₹47.2 L+₹10.4 L (28.3%)Accepted-Finance | L3 | Accepted-Finance High |
Tender Value
₹55 L
EMD Value
₹1.1 L
Closing Date
25 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sh Sachin Jaiswal, IDSE, CWE Chandimandir
HQ CWE Chandimandir
CA NO. CWE/CHM-36/2023-24 REPAIR TO ROOF, CHAJJA, VENT PIPE, JOINERY AND CONNECTED ITEMS OF BLDGS IN SECTOR D AND F UNDER GE CHANDIMANDIR
2023_MES_602946_1
CWE/CHM-36/2023-24
Open Tender
Miscellaneous Works
Item Rate
180 days
HQ CWE Chandimandir
Class C category a(i)
8 documents required · 8 mandatory
₹1,000
Yes
GE Chandimandir
₹1.1 L
Yes
10 Aug 2023
13 Jun 2023
31 Jul 2023
13 Jun 2023
25 Jul 2023
11 Jul 2023
14 Jun 2023 - 21 Jun 2023
Amount
Dismantling of existing brick tiles or terracing tiles single layer on roof grouted in cement mortar complete all as specified & directed.
Demolition of Mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and as directed.
Material and labour for PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in padding on RCC roof finished fair and even includind demolition of existing PCC complete all as specified and directed.
Material & labour Rendering 20mm thick cement plaster in CM 1:4 on brick or concrete surface of roof with mixing of WPC @3% by wt. of cement (WPC will be paid separately) finished fair and even without using extra cement complete all as specifed and as directed
Material and labour for preparation and cleaning of roof surface and ajoining vertical surfaces including applying a coat of oil base bituminous primer @ 0.40 ltrs per square meter and Material and labour for for APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3 mm thick reinforced with polyester non woven fabric (weight not less than 150 gms/sqm) laid on primed surface by torch application complete all as specified and directed.
Material and labour PCC 1:2:4 type Type B0 (using 12.5 mm graded crushed stone aggregate) as in roof kerbs mud stops and similar work complete all as specified and directed.
Supply only Integral waterproofing compound complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
Supply & fixing glazed ceramic coloured tiles 300mmx450mmx 7mm thick as in dado, set and jointed in neat cement slurry and grouted in white cement complete as on vertical surfaces over & including 10 mm thick rendering layer in CM 1:4 complete all as specified and directed.
Supply & fixing non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over & including 15 mm thick screed or bedding layer in CM 1:6, and roughening the surfaces complete all as specified and directed
Material & labour for non Skid ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.18 Sqm but n. exc 0.38 sqm in floors, over & including 15 mm thick cement mortar (1:6) screed etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified and directed.
Material & labour for 12-16 mm thick, baroda green marble, machine cut laid over & including 15mm thick average thicknesss) cement mortar 1:6 bedded and jointed with grey cement slurry and pointed with grout of matching shade including moulding and all necessary cutting & and machine polishing (table rubbed and polished), as in on kitchen platform, stair steps and like complete all as specified.
Material & labour for rendering 15mm thick cement plaster in CM 1:4 on brick or concrete surface on inside wall of ventilation shaft of MAP Qtrs finished even and fair without using extra cement incl taking down existing plaster complete all as specifed and as directed. ( Rates are including cost of scaffolding etc for four storey MAP Qtr building)
Material & labour for rendering 15mm thick cement plaster in CM 1:4 on brick or concrete surface on wall finished even and fair without using extra cement incl taking down existing plaster complete all as specifed and as directed. ( Rates are including cost of scaffolding etc for four storey MAP Qtr building)
Material & labour for rendering 10mm thick cement plaster in CM 1:6 on brick or concrete surface of wall finished even and smooth without using extra cement incl taking down existing plaster complete all as specifed and as directed
Material & labour for rendering 5 mm thick cement plaster in CM 1:3 on brick or concrete surface of ceiling finished even and smooth without using extra cement complete incl taking down existing plaster complete all as specified and directed.
Material & labour for preperation of new surface and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm / litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.
Material & labour for Preparing new plastered surfaces and appling wall care putty of 2-3mm thick incl smoothening the surfaces with sand papers etc, and applying two coats of OBD over a coat of white wall primer on wall surfaces complete all as specified and directed.
Material & labour for preparing of old plastered or unplastered surfaces and applying two coat of distemper oil emulsion complete all as specified and directed.
Material & labour for preparing of old plastered or unplastered surfaces and applying one coat of distemper oil emulsion complete all as specified and directed.
Material & labour for Complete removal of existing treatment and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm / litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.
Material & labour for taking down shutter of any description exc 1 sqm but n.exc 2.0 sqm each and removing from site complete all as specified and directed.
Material & labour for taking down chowkhat with shutter (without taking off shutter) and removing from site, n exc 1.50 Sqm each complete all as specified and directed.
Material & labour for taking down chowkhats or frame exc 1.5 sqm and n exc 4 sqm with shutter (without taking off shutter from the frame) complete all as specified and directed.
Supply & fixing factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) Complete all as specified as per Manufacturer broucher. MAKE: RAJSHREE,SINTAX,ECOCELL OR EQUIVALENT as approved by GE.
Supply and fixingProviding and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) MAKE: RAJSHREE,SINTAX,ECOCELL OR EQUIVALENT as approved by GE.
Material & labour factory made pressed steel frames, having profile 125 mm x 60 mm for doors with one or more rebates made out of 1.25 mm thick mild steel sheet, including necessary fixing lugs, butt hinges, lock strike plate, etc including filling of cement concrete 1:3:6 type C1 using 20mm raded stone aggregate in frame complete all as specified and directed.
Material & labour Factory made pressed steel frames, conforming to IS, having profile 105 mm x 60 mm for doors with one or more rebates made out of 1.25 mm thick mild steel sheet, including necessary fixing lugs, butt hinges, lock strike plate, etc including filling of cement concrete 1:3:6 type C1 using 20mm raded stone aggregate in frame complete all as specified and directed.
Material & labour 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, complete all as specified and directed.
Material & labour for factory made, 35 mm thick, panelled shutter two panel with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneered on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.
Material & labour for factory made 35 mm thick second class hard wood (three panel,divided into sub panels with provn of one vertical rail in full height) glazed and skelton shutters open rebated prepared to received gauge glass etc, edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part I, Section-8, clause 8.24 (a) complete all as specified and directed.
Material & labour for factory made steel window box type with side hung shutters including box type hinges, 125mm steel handle-02 Nos mild steel ISI marked tower bolt 125mm size (minimum 2 for each shutter) with and including necessary MS hold fasts complete with glazing bars, dovetailed or welded including one shop coat of red oxide zinc chrome primer fixed as in repair complete all as specified and directed.
Material & labour for factory made steel window box type with side hung shutters including box type hinges, 125mm steel handle-02 Nos mild steel ISI marked tower bolt 125mm size (minimum 2 for each shutter) with and including necessary MS hold fasts complete without glazing bars, dovetailed or welded including one shop coat of red oxide zinc chrome primerfixed as in repair complete all as specified and directed.
Material & labour for factory made box type steel ventilators with and including necessary MS hold fasts including one shop coat of red oxide primer, hinges, tower bolts 100 mm, steel handles and steel peg stay complete without glazing bars devetailed or welded fixes as in repair complete all as specified and directed.
Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specifed and as directed.
Supply & fixing 3mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.
Supply & fixing 4mm thick figured glass pin head type ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.
Supply & fixing in repair 3mm sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specifed and as directed
Supply & fixing 3 mm thick acrylic plastic sheet, transparent , cut to size, fixed in steel window as glazing, including MS glass pin & glazing putty for fixing complete all as specified and directed by engineer-in-charge
Supply & fixing framed work in repair such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed
Supply & fixing 150mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specifed and as directed
Supply & fixing 250 mm long MS, sliding door bolt plate type, stone enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 06 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.
Supply & fixing 200 mm size Aluminium anodised , barrel tower bolt of extruded section and fixed complete all as specified and directed.
Supply & fixing 100mm butt hinges , extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed for PVC door, type C-21 complete all as specified and directed.
Supply & fixing 300 mm Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete fixed as in repair complete all as specifed and as directed
Preparation of New or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of complete all as specified and directed.
Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and directed.
Material & labour preparation of old wooden surface of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specifed & directed
Material & labour for fly ash brick work using old size bricks, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar 1:6, including demolition of existing brick work complete all as specified and directed.
Repairs to leaking joints of CI pipes/ traps/ fittings etc after taking out old jointing material lead / cement, cleaning the joint thoroughly and filling new material Drip seal/ lead / cement and sealing the joints with joint sealing compound (Dr Fixit or equivalent) and making the installation completely leak proof complete all as specified. Note : (i) The work pertains to the trap/drain pipes/ fittings of the WC / bath of MAP quarters installed under side of the roofs. (ii) All the joints of pipes / traps / fittings of one WC / bath shall be measured as one unit and payment shall be made for each WC / bath as “Each Job”. (iii) The rates shall include for providing scaffolding etc as required.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for including kitchen chimneys all as specifed and as directed
Material & labour for RCC 1:2:4 type B-1 (using 20mm stone agg) as in slabs supported on walls, beams and columns as in floors, roofs, landings, balconies, canopies, deck slabs, kitchen slab and in cupboard shelves and the like incl necessary form work complete all as specified and as directed.
Material & labour for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 m complete all as specified and directed.
Material & labour for solid PVC board 20-22 mm thick (ISI marked), interior grade white colour, fixed with screws in kitchen cupboards, shutters incl dismantling old boarding complete all as specified.
Material & labour for 19 mm thick block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work as in kitchen cabinet and cup board/ wardrobe shelf with 6mm thick IInd class hard wood edging on exposed edges, fixed as in repair complete all as specified and directed.
Material and labour for piano hinges, mild steel bright finish, width of flap 40mm when open, fixed as in repair all as specified and directed.
Supply and fixing PVC body magnetic catchers for use in cup boards of kitchen, ward robes, complete all as specified.
Supply and fixing Wash hand basin, vitreous china, flat back, white of size 550x400 with and including waste coupling, angle brackets, PVC connection 15mm size, 450mm long, PVC waste pipe, fixed as in repair complete all as specified and directed.
Supply and fixing in repairs Wash down water closet (Pedestal pattern), complete including PVC seat cover and CP jet complete all as specified and as directed.
Supply and fixing Vitreous china squatting pan, “Orissa” pattern size 580mm x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe complete including trap, set with cement as in repairs complete all as specified and directed.
Supply and fixing Bib taps brass, fancy type, Short body with wall flange, standard chromium plated, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed.
Supply and fixing Angular stop cock, fancy type, cast copper alloy chromium plated, screwed down, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed.
Supply and fixing for PVC connection 15mm size with PTMT nuts of length 450mm fixed as in repair complete all as specified and as directed.
Supply and fixing central hole Basin Mixer, without popup waste system with 450mm long copper pipes and brass nuts, cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair, complete all as specified and as directed.
Supply and fixing chromium plated, fancy type shower rose with swivel joints 125 mm dia with CP arm and fixing to steel pipe 15mm bore fixed as in repair complete all as specified and directed.
Material and labour for bath mirror cabinet of size 622mm x 422mm fixed to wall with rawl plugs having arrangements to put inside toiletries, fixed as in repairs complete all as specified and directed. Make : Prayag cat part No. 555 or equivalent make of cera/ Parryware as approved by GE
Supply and fixing Kitchen sink with drainage board made out of stainless steel sheet 1.0mm thick (SS-304) with plug, washers and CP waste coupling, overall size 915mm x 460mm, with bowl of size 405mm x 354mm x 203mm incl fixing cantilever brackets and connecting union of pipe fixed as in repair complete all as specified and directed.
Material and labour for 750mmx600mm plate rack made out of 1.00m thick stainless steel sheet with steel shelves and hanging arrangement for utensil, fixed as in repair complete all as specified and directed.
Supply and fixing Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified fixed as in repairs complete all as specified and directed.
Supply and fixing PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including 32mm dia PVC bend for squat/pedastal pattern etc , fixed as in repair complete all as specified and as directed.
Supply and fixing PVC, waste and vent pipe 75 mm thick in any length with or without ears with cement joints, laid in trenches or in floor or fixed to walls with clamp fixed in repair complete all as specified and as directed.
Supply and fixing PVC, waste and vent or rain water pipe 110 mm dia, fixed in ventilation shaft of MAP qtrs, in any length with or without ears with cement joints, laid in trenches or in floor or fixed to walls with clamp fixed as in repair complete all as specified and as directed.
Supply and fixing 75 mm bore PVC (SWR) bends any radius with or without access door fixed as in repair complete all as specified and as directed.
Supply and fixing 110 mm bore PVC (SWR) bends any radius with or without access door fixed as in repair complete all as specified and as directed.
Supply and fixing 15mm dia (concealed or unconcealed GI tubing medium as per site requirement) GI tubing medium grade with all fittings to walls, ceiling or laid under floors including taking down old tubing complete all as specified and directed.
Supply and fixing 20mm dia (concealed or unconcealed GI tubing medium as per site requirement) grade with all fittings tfixed to walls, ceiling or laid under floors including taking down old tubing complete all as specified and directed.
Cutting chases, pining in, making good to facings where required and pointing in cement mortar 1:3, for concealed water tubing etc and making good, cutting exc 10cm but n exc 20cm girth complete all as specified and directed.
Supply and fixing as in repair 500 ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including PTMT float valve and tank nipple complate all as specified and directed.
Supply and fixing stop valves, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed 20mm as in repair bore complate all as specified and directed.
Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specifed and as directed
Material and labour for plain cement concrete (1:4:8) type D-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified & directed.
Material and labour for 40 mm thick PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in flooring, finished fair and even without using extra cement including finishing surface by brooming complete all as specified and directed.
Material and labour for machine pressed precast conctete interlocking paver block any shape and size with grey cement add no pigment, confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade (with gray cement & pigment) over and including 25 mm thick sand cushioning complete all as specified and as directed .
Demolition of Precast reinforced cement concrete Jali or louvers of any description and in any thickness not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed.
Supply and fixing 18 mm thick PVC louvres and jallies, in fixed in aluminium/mild steel channel frame of approved thickness, including all mouldings complete all as specified and directed.
Supply and fixing Mild steel Fe-290 (Gde E- 165) Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Complete all as specified and directed.
Supply and fixing Mild steel Fe-290 (Gde E- 165) Plates (plain or chequered) as in mild steel doors or gates of ventilation saft of MAP qtrs, channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment complete all as specified and directed.
Material and labour for bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; will ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe410-0 or Fe 310-0 complete all as specified and directed.
Supply and fixing 75mm bore `sand cast pipes` cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors including taking down existing unserviceable CI pipe complete all as specified and directed
Supply and fixing100mm bore `sand cast pipes` cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors including taking down existing unserviceable CI pipe complete all as specified and directed.
Material & labour for 75mm bore dia cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 complete all as specified and directed.
Material & labour forfor 100 mm bore dia cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 complete all as specified and directed.
Supply and fixing CI 75mm branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fixed as in repair complete all as specifed and as directed.
Supply and fixing CI bends (any radius) diminishing pieces or tapers (larger bore measured) for pipes or bore 100 mm, fixed in repair complete all as specifed and as directed.
All as per srl item No 95 here-in-before but 75 mm bore of pipe complete all as specifed and as directed.
Supply and fixing CI branch piece single (equal, ordinary or inverted spigot or socket type) or with parallel branches for pipe of 100 mm bore fixed as in repair complete all as specifed and as directed.
Supply & fixing 15 mm dia Composite (Polyethylene-Aluminium-polyethylene(PE-AL-PE)) pressure pipes 1216 as per IS 15450:2004 including necessary fittings, fixed as in repair as per manufactures instructions complete all as specified and directed. (Make : KiTEC, Vectus, Nexgen)
Supply & fixing 20 mm dia Composite (Polyethylene-Aluminium-polyethylene(PE-AL-PE)) pressure pipes 1620 as per IS 15450:2004 including necessary fittings, fixed as in repair as per manufactures instructions complete all as specified and directed. (Make : KiTEC, Vectus, Nexgen)
Supply & fixing brass Socket for composite pressure pipes 1216 mm / 1620 mm dia as per IS 15450:2004 including necessary fittings, fixed as in repair as per manufactures instructions complete all as specified and directed.(Make : KiTEC, Vectus, Nexgen)
Supply & fixing brass Tee for composite pressure pipes, 2025 mm dia as per IS 15450:2004 including necessary fittings, fixed as in repair as per manufactures instructions complete all as specified and directed. (Make : KiTEC, Vectus, Nexgen)
Supply & fixing brass Elbow for composite pressure pipes 1216 mm / 1620 mm dia as per IS 15450:2004 including necessary fittings, fixed as in repair as per manufactures instructions complete all as specified and directed. (Make : KiTEC, Vectus, Nexgen)
Supply & fixing brass Union for composite pressure pipes 1216 mm / 1620 mm dia as per IS 15450:2004 including necessary fittings, fixed as in repair as per manufactures instructions complete all as specified and directed. (Make : KiTEC, Vectus, Nexgen)
Material & labour for false ceiling of Everest designer boards of size 595mm x 595mmx4mm thick fixed on suspended false ceiling including GI exposed ceiling suspension system of grid size 600mmx600mm with main runner 38mmx24mm, cross tee 29mmx24mm and wall angle 24mmx24mm. Grid of GI system duly suspended with 4mm dia GI/MS bar hanger fixing with steel dash fastner or iron purlins from the roof with adjustment clip providing position for light fixture etc fixed as in repair all as specified and directed.
Gunjan and Gunjan Associates
Standard Const. Co.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .